How To Replace Intake Manifold Gaskets 02-07 Mazda 6
HTML-код
- Опубликовано: 27 сен 2018
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/137/g/gaskets
In the video, 1A Auto shows how to replace a torn, loose, or leaking intake manifold gasket. The video is applicable to the 02, 03, 04, 05, 06, 07 Mazda 6.
This repair was done on a 2007 Mazda 6 i 2.3L and the process should be similar on the following vehicles:
2003 Mazda 6
2004 Mazda 6
2005 Mazda 6
2006 Mazda 6
2007 Mazda 6
2008 Mazda 6
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ohT/1AXAA00013
• 10mm Socket 1aau.to/ogC/1AXAA00017
• 8mm Socket 1aau.to/ogC/1AXAA00017
• Needle nose pliers 1aau.to/oaV/1AXAA00051
• Needle nose pliers 1aau.to/oaV/1AXAA00052
• Ratchet 1aau.to/oiz/1AXAA00016
• Socket Extensions 1aau.to/ohK/1AXAA00015
• Torque Wrench 1aau.to/oeT/1AXAA00044
• Throttle Body Cleaner
• Drain Pan
• Wire Brush 1aau.to/oan/1AXAA00079
Subscribe: / @1aauto
Check out our playlist:
Mazda 6 2002-2007 1st gen GG1: • Mazda 6 2002-2007 1st ...
For More Info visit us at 1aau.to/h/rQ/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
i know Im asking randomly but does someone know of a trick to log back into an Instagram account..?
I was dumb lost my account password. I love any assistance you can offer me!
Thank you so much for this video Sue. I dont know how you're not cussing up a storm so far cause I know I was lol going through the comments and reading the "why are you doing that" and your responses to them helped me figure it out. Thank you so much again for taking the time to make this video. You guys helped me repair most of my mazda by myself 🙏❤
This is by far is the best Video showing in real time step by step details on how to take off intake and replace step by step. I have to remove intake on 2005 Focus ST with 2,3 engine just to replace the PCV valve as it the only way to change it which seems to be stuck open and i sucking oil from engine.
+ED Dewland Thank you! We are happy we could assist you.
Very good and detailed video, impressive job done by lady mechanic, not often seen at this hard job:).
To hold the bolts on sockets I using piece of rubber from
used gloves, never tried the grease.
Great Work Done I have a P0171 Running Lean Etc.Took it to The Shop He Used Brake Fliud Sprayed The intake stated I need to change The Gaskets.
Thanks for the video, I just replaced the intake gaskets and cleaned out my throttle on my 2008 Mazda 6. It went great!!
+Ector Rodriguez Thanks for checking us out! 1AAuto.com
Does it run a lot better?
Thank you ,you help so much
Thanks for this video! This saved me so much time...along with a magnetic 10mm socket.
+Seth Freehling Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Want a thank you very much for this video. Although my year and model were slightly different very much was the same or similar. This video was so comprehensive and it helped me know what to expect before I did the job. Thank you once again for a great video
took my time 2010 mazda-6...did not drain coolant, remove injectors or jack up car!
Instant improvement in MPG & cat not at threshold code gone...winter will tell!
Many thanks for the video
+c jones Thanks for checking us out! 1AAuto.com
This girl is outstanding i wish i was as blessed at doing this
+Douglas Cozart Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
need to replace my mazda3 intake manifold with a WeaponR one, great step by step vid💯
+Desmond Boatwright Thanks for checking us out! 1AAuto.com
Very detailed information, lady machanic is impressive
+konstantinus Stoyanov Thanks for checking us out. 1AAuto.com
Great job Sue! How about a paid trip down to sunny South Carolina. You'll love it and you can watch me tear up my 2008 Mazda 3 with the same 2.3L engine. My unsupervised mechanic skills never seem to match the RUclips instructional videos. I need professional help! 😏
This a really good video. I was kinda annoyed to hear we need to change our gaskets on an 05 Mazda 6 but it doesn't look that bad i'm kinda looking forward to it now thanks!
Thank you! +Anthony Ruiz
Was it fun to pull off the plenum intake off the EGR tube inserted behind? Lol
+Anthony Ruiz
Think u it was big help for me many thanks
It's a great vidéo.
It's a Big help for me.
Thanks very much from France.
+beat bang Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Thanks excellent video
I removed the whole front end of the car as well as the radiator, which made it easier for me to remove the intake.
What a job, salute you Mam, how you do that.... Very professional
I own a 2007 Mazda 6.......I've watched slot if these great videos. I wish Sue was my neighbor lol
+Doug Lingle Thanks for checking us out and for taking the time to comment! 1AAuto.com
Doing this job tomorrow. Thanks for the video. I am sure you saved me much time and headaches.
+Alton Barbee Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
thanks for video i am trying to locate vacume leak and as a last resort i want to check gaskets on intake as i havent found any other fault so far
Great video thank you.
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Luke Reeves
Love this. Just would like to know the extension combos on the wrench . Would a 5" work?
I've done this on a Mondeo a couple of times. It's mostly the same engine as this. You don't need to drain the coolant or disconnect the fuel rail, I'm not sure why you need to on the Mazda. You also don't need to unbolt that metal tube from the head because there is a bit more forwards room.
+The Gear Knob We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.
This lady was actually pretty good 👍🏻
+Russell Vinson Thank you!
Great video,explained well from the start,thank you..
+Ernesto Rodriguez Thank you!
This is exactly what i needed to see to prepare the replace the intake manifold on my Mazda 5, which is leaking on the vacuum port. Unfortunately the insert is built into the manifold, which means the whole manifold needs to be replaced. The procedure looks to be about the same.
Thank you for taking the time to make a great video! Great work, Sue!
Does this same procedure work to remove the intake manifold from a 2006 mazda 3 2.3 s5?
I presume this would be very similar to Mazda 3 2005-6, maybe a cause of rough idle and causing ol fault with no code. Have changed everything else, MAF, o2 sensors, coils, spark plugs, fuel filter.
Since I need to replace radiator support, bumper could be easier when radiator is out.
Just wondering why was the coolant drained? Thank you for the helpful video
+Ivan Sanchez Thanks for checking us out! It is suggested to drain the coolant to prevent any leaks going into the manifold. Hope this helps you out!
huge fan
Thanks for checking us out. 1aauto.com +ME I AM
Dear Lady, can you show me-in the near future- how to change a flat belt on the left side of this Mazda 6? Or this to komlicated is ? THANK YOU
Good Jobbbbb
+Maz Village Thanks for checking us out!
Good day i would like to know what the emission tube in the intake does ?
I dont know about the torquing though, you say 12-14psf which is 574-670NM, is that correct? I will have to spend a small fortune for one of these wrenches.
muy bueno ok
Any help for the v6?
Awsome video an excelent job. Thank you a lot beautiful woman.
I love you baby!!
Can you make a video were you disconnect the fuel line
took my 2004 Mazda 1.8 Sakata to the dealership due to an airbag recall. The mechanic mentioned the engine light was on, and that the air intake/gasket did not sound right? the engine light has been intermittent recently, switching itself on and off. Is this a common Mazda 6 issue - annoyed as I had the car serviced in Feb.
Thanks for watching our video! +Syed Ali
How do I make my throttle body disappear like in the video at 3:58?
how long did it take to get the center in the hole bolt lined up?
+R R It can be tricky, but Sue just worked at it a bit. Stay with it.
👍
Is it bad to remove the flaps in the intakes? Mine seem to be rattling
No I'm removing mines like an less than an hour
I followed this guide and upon completion my vehicle does not turn over when I attempt to start it (No noise) I've tried several batteries, all internal electronics in the car work properly. Any ideas? Thanks
We have a Mazda in the shop right now with this very situation, did you end up finding a solution?
I need to change mine on the grand marquis.
+WWambition It may be a different procedure on your application. We currently do not have an auto repair video for this particular year, make and model. Thank you for asking. 1aauto.com
Hi is the same for 2008 model? ???
+Antonio Canseco At this moment, the closest how-to video we have to your request is for this vehicle, which is very similar to the one you have. The steps may not be 100% the same, but should contain an adequate amount of information necessary for accomplishing this task:
How long does it take to change it
For a V6 3.0L intake manifold it shouldn't be more than 30mins to an hour at most. Only for gaskets and some silicone sealant. There's only about 4 hoses to unplug and 2-3 cables to disconnect. Tricky it may be to pull off the EGR
what is the cost to do this job rough estimate???
+victor naja We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You don't have a video how to take of intake manifold out .lady
+Tony Cervantes We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
The design on this engine is just dumb, there's no room to work and that middle bolt is almost impossible, also the crankshaft is not even keyed it's just held in position by pressure, so if it becomes loose goodbye to your valves... Just bad design, sometimes i think they over complicate things just to keep us all in line....
too much work.
Ummm....gross!