Really hope if he meets you guys again kyle gives you a ride in the nsx / rowdessy. Great to "meet" you 😅, hope you come back and show these guys some amazing places /stuff/ tips and tricks.
Wow, I talked to Brent briefly about this very subject a while back. I think it may have been before you moved to Florida. I own mini airboat association. If you need any info I'd be glad to help. I also build aluminum hulls.
Boat tip: Instead of putting it in the pool I like filling the inside with water and marking where water leaks out on the hull side. I’m born and raised in Florida and a dagum k swapped budget airboat is some A1 Florida-Man content. I love to see it
Mechanical engineer here, would suggest you run a bar from the rear mounts downwards to the diagonal bar. It'll provide better support and won't have a bending moment on the front mounts as a result, and should be much more stable.
@@r7kelley553 true! just the princible works for anything structual, roll cages to bridges. it's all about making sure load paths are clearly defined into nodes or key location points
Long time sub, love the mix of content and the way you guys have stayed in your lane and although you can do more now you don’t go stupid on the budgets and keep things realistic
Yeah either 1 of those NSX's are so attainable. Those connecting rods in the MR2 are in anyone's budget. The AWD train in the Civic,& Rowdessey he said himself are several thousand dollar upgrades. Billet bell housing for those sequential trans I'm sure they're giving those away. Guys are living with a bigger budget than most obviously.
@@Justaguy-pn4vn Spoiler alert custom cars cost money. While it might not be realistic for someone to have all of those at the same time, they don't do anything crazy like B is for Build or Rob dahm buying a 100K CNC machine. That billet bellhousing on his hatch is 3.3K it's not like unobtanium.
@@RacePhreak right? I don't even understand how B is for Build even affords everything he buys with like 200k views a vid. The heat in that shop alone probably costs 2 grand a month.
Wow, your creativity constantly amazes me. You definitely know how to make fun videos. It makes me want to continuously look for new materials from your show. Your shows are definitely very exciting. Thanks for making great videos.
Kyle had really good questions , and without knowing it , did a great interview just because he want to understand and learn about the stuff. Good job!
What a cool dude at the blade shop. Love to see shops like this, survive and thrive, creating their own products. And the fact he knew about BoostedBoiz was epic as well.
Idk I've seen some pretty nasty airboats with choppy v8s that have held up pretty good. However they were Certainly more high dollar machines used for the starting points than Kyle's little ditch pickle. Lol
When you guys are ready to make it fast my brother makes racing hulls out of carbon fiber and fiberglass hit up outlaw airboats. Hull he built his boss weighed 175 lbs
Hell yeah. Can't wait to see more airboat footage. I used to have a 13ft fiberglass with a lycoming 0540 and I was running her hard. Like I always did.And my wooden 2 blade prop got compromised and came apart sent one half of it right through the haul ! The cage is there to protect the prop. It's not going to stop a chunk of blade. It's just a death missile if it comes apart. 🤘
Fun project! Can't wait to see the old twin turbo setup from the MR2 on this thing!😁 Just a heads up, you should never lift with 1 side of a 2 post lift. You should also never hang something under the legs but as long as you use both sides and it's not too heavy you'll be ok.
Really depends on the lift tbo, on a hydraulic lift with 2 rams yeah, sound advice, but on a screw lift no problemo, or a single ram with a link cable.they couldnt care less how unbalanced the load is. the lift in teh video is obviously hydraulic and due to being modern likely a 2 ram effort so yeah shouldn't unbalance it
Your prop is on BACKWARDS!!!! An easy tell is to look at the stickers on the blades as they will always face the front of the boat/aircraft. Love the build, have fun guys!
Glad you threw the safety talk in at the end. Know absolutely nothing about airboats, but I do know they can be very dangerous if you don’t know what you’re doing. Hopefully it turns out halfway decent and works!
@@SirVic42 Drews Airboat is not LS swapped. It was Built that way from the Factory. Just because it is LS powered does not mean it is Ls swapped. Most New Air Boats Built now Come with a LS in them from new.
Well I can officially say that the boosted boiz have been an inspiration. I just turned 18 last month and decided to impulse buy a 1999 honda civic ex 5 speed. Picked her up for 250. Going to be a fun project but if it weren't for watching them I'm pretty sure i would've went v8🤣
Damn nice pick up man. If ur k swap have fun. Make sure u get a eg subframe and manual rack with the eg/integra universal for the steering shaft. The subframe will make the engine sit correctly with the axles. Have fun
I just gotta say it would be awesome to see a supercharger on a k series... also would really help with torque! But I love the content and you guys always impress! Keep up the good work!
Very cool project and can't wait to see it finished. I could be wrong on this but the flat side of the prop looks like its facing the front of the boat and the curved side is facing the rear. I believe the flat side should face the back and curved should be forward, maybe it just looks that way. Looking forward to seeing it progress.
The Sensenich tour was really cool! It's awesome to see you always finding local shops to work with and how you guys just tackle a project head on! Great vid, Kyle!
Awesome project guys, love it...🤩✨👍 Turbo it out the gate or set that in motion immediately...💫 No hesitation...🏃🏾 It's in the name.., Boosted Boiz...💥👍
Y’all are sticking to your roots, while doing some wild builds. Nice units that started as a death trap. It’s awesome to be along for the ride watching this shit.
Never thought Id enjoy a Kswapped airboat build so much but now I cant wait to see you smoke JH and ZZ at their own game when you slap a turbo on it!!😂
That Rag tag airboat makes the Rowdsey (in her original 500 buck form) look like a Rolls Royce Phantom! Wyatt all I can say is film from shore. Say goodbye to Kyle cause he’s goin downnn
3-Lifejackets,2-Oars for when you beach in shallows,and a Push-pole for when you get stuck,and you will get stuck.Those need to be with you every trip and test.Fire Extinguisher as I've suggested for Every car build.It's not just you that catches fire.The swamps do too and you darn sure want to live.
Hey Kyle and Wyatt I lived in Haines City in Polk County and I used to have a nice airboat with a 427 stroker Prestige Motorsports Engine and it was so fast it would make my stomach sick it took off so quick lol but it was so fun. I can't wait to see you and Wyatt get this thing finished. If it was my airboat I would redo the actual prop cage surround. It would be a lot safer.
Love Wyatts lazy, relaxed humor he’s really good on camera You know he’s a keeper Kyle! Looking good great Kyle keep up the great work you not looking so scrawny and I know you will keep it up because you’re a highly motivated person which has definitely paid off from the early days Respect
This is the coolest video in a long time. Not underrating the other content but building something totally new and dealing with local businesses with introduction to their work. Perfect!
That guy is a cool dude. Would be cool to do a video with his reaction of the finished product. Maybe he can go out with you guys and bring his airboat.
Hey Kyle…. I’m pretty sure the prop is on backwards. Thinking about crankshaft rotation direction and looking at the belt drive setup I’m pretty sure the prop will spin counterclockwise looking at it from the rear.
That entire - Unit comment before 30 seconds , I can imagine Uncle Eddie Pulling up, YUPP THIS HERE BOIS is an AIRBOAT N MAV - MINI Assult Vehicle, not to be confused with the RV.
Great video, I had to watch the whole video! Definitely super cool seeing start to almost finished. I look forward to seeing more longer video of a project, start to finish.
before you finalize stuff you better make those engine mounts adjustable so you can tune the angle of the rotor. its more or less like a jet boats trim you want to get the front end up but not too much that your planting the ass end to hard thats a massive mistake i see so many people doing with jet boats they set it to max to get that massive roost that looks cool but doesn't give cool performance.
Авто/Мото
It was good to meet you Kyle, glad we had something that quick for you guys. Hope the build turns out great.
Love that you helped him out, hes such a great guy. Killer product
Really hope if he meets you guys again kyle gives you a ride in the nsx / rowdessy. Great to "meet" you 😅, hope you come back and show these guys some amazing places /stuff/ tips and tricks.
@@JimmytheCow2000 Thanks Man, we are lucky to have a great group here and everyone cares about their work.
@@dzzope might have to make sure my life insurance is up to date first before making a rip in it., 🤣
Absolutely killer business yall have down in Florida. It's insane how many performance industry companies are down there.
Wow, I talked to Brent briefly about this very subject a while back. I think it may have been before you moved to Florida. I own mini airboat association. If you need any info I'd be glad to help. I also build aluminum hulls.
Aluminium hulls = pinholes
@@dylanzrim3635 been running the same aluminum hull for 14 years, hit rocks, ran into a tree. Never a leak.
If you're anywhere near Kyle in Florida you should for sure reach out to him direct - very cool!
I think its safe to assume kyle is officially a florida man 😂
Just waiting on florida man news 😂
Couldn't agree more 💯
Facts
Or a Honda guy... Lol
You need more than 4 cylinders to be a Florida man
always nice seeing people manufacture stuff here still ! and you know its gonna be QUALITY
you must be russian :)
Ya not alot of stuff is truly made in america anymore more like just assembled here
Love how you guys always manage to find local businesses to support lol Super nice guy too, can't wait to see this thing all done!
😂 the Russian piece
@@GoldAk47 not for the belt drive but for the propeller
What part of Russia you live in lol
Twin Turbo K-swapped Airboat has a nice ring to it! it's the perfect candidate for the twin turbo manifold!!
Too much fab work
This one should be a high compression build
It's pointed the wrong way. Wouldn't work.
He already has the intake adapter from the MR2...?
@@connoisseuroftigolbitts Wrong channel, this ain't the CompressionBoiz haha
@@MiGujack3 you definitely right, thought this was PFI
Gotta respect the folks who make the stuff they want. Back woods ingenuity.
Boat tip: Instead of putting it in the pool I like filling the inside with water and marking where water leaks out on the hull side.
I’m born and raised in Florida and a dagum k swapped budget airboat is some A1 Florida-Man content. I love to see it
You guys are the definition of k swap the world!!! 💪🏽🤝🏽💯
I laughed at this title
Kyles the definition of
K Swapping the world
Things rollin up looking like the Olive Garden logo with all those sweet vines wrapped around the fan guard
when it's here, it's fam-boat
all you can eat boost
Mechanical engineer here, would suggest you run a bar from the rear mounts downwards to the diagonal bar.
It'll provide better support and won't have a bending moment on the front mounts as a result, and should be much more stable.
That would be more related to structural engineering.
@@r7kelley553 true! just the princible works for anything structual, roll cages to bridges. it's all about making sure load paths are clearly defined into nodes or key location points
@@Sf_Mason the “princible”, eh? I vote we find a new unofficial channel mechanical engineer.
@@Sf_Mason yeah I know I was just giving you a hard time.
Structural engineer here. You’re not wrong.
You need to bring ol'Razzle Dazzle out!
Kyle you need get right back to Sensenich and give that guy a ride along! I was hoping you where going to take him out on the NSX!
Long time sub, love the mix of content and the way you guys have stayed in your lane and although you can do more now you don’t go stupid on the budgets and keep things realistic
Agreed makes things more fun. And more relatable.
Yeah either 1 of those NSX's are so attainable. Those connecting rods in the MR2 are in anyone's budget. The AWD train in the Civic,& Rowdessey he said himself are several thousand dollar upgrades. Billet bell housing for those sequential trans I'm sure they're giving those away. Guys are living with a bigger budget than most obviously.
@@Justaguy-pn4vn Spoiler alert custom cars cost money. While it might not be realistic for someone to have all of those at the same time, they don't do anything crazy like B is for Build or Rob dahm buying a 100K CNC machine. That billet bellhousing on his hatch is 3.3K it's not like unobtanium.
@@RacePhreak right? I don't even understand how B is for Build even affords everything he buys with like 200k views a vid. The heat in that shop alone probably costs 2 grand a month.
@@Justaguy-pn4vn always has to be a negative Nancy in the comments
Wow, your creativity constantly amazes me. You definitely know how to make fun videos. It makes me want to continuously look for new materials from your show. Your shows are definitely very exciting. Thanks for making great videos.
"we don't know if we're going to end up turbo'ing this thing" yeeeea ok... 🤣
Dang, you boiz Florida Man creds are spiking through the roof.
That’s a really good excuse for using that twin turbo manifold 🤷♂️🤷♂️🙏
Kyle had really good questions , and without knowing it , did a great interview just because he want to understand and learn about the stuff. Good job!
Thanks for watching ❤️❗️
👆☝️Stand a chance to get win big by getting selected among my shortlisted winners..
Telegram only to claim your prize🎁🥰🎁
What a cool dude at the blade shop. Love to see shops like this, survive and thrive, creating their own products. And the fact he knew about BoostedBoiz was epic as well.
Terry seems like an awesome dude! Can’t wait to see the air boat rip! You have to give Terry a ride in the NSX and air boat.
Glad to see I was right on the airboat. 😂 hope the harmonics of a 4 cylinder don’t shake it apart
Idk I've seen some pretty nasty airboats with choppy v8s that have held up pretty good. However they were Certainly more high dollar machines used for the starting points than Kyle's little ditch pickle. Lol
When you guys are ready to make it fast my brother makes racing hulls out of carbon fiber and fiberglass hit up outlaw airboats. Hull he built his boss weighed 175 lbs
Kyle has the Florida man genes engraved in his builds 😂
IDKY, but 3:07 was just comedy gold! 🤣😂
"And, oh, yeah, that just broke off." 😂🤣😂🤣😂🤣
Definitely gonna have to turbo that thing. I'd like to see it ride on land so it'll need the power to move.
Hell yeah. Can't wait to see more airboat footage. I used to have a 13ft fiberglass with a lycoming 0540 and I was running her hard. Like I always did.And my wooden 2 blade prop got compromised and came apart sent one half of it right through the haul ! The cage is there to protect the prop. It's not going to stop a chunk of blade. It's just a death missile if it comes apart. 🤘
Fun project! Can't wait to see the old twin turbo setup from the MR2 on this thing!😁
Just a heads up, you should never lift with 1 side of a 2 post lift. You should also never hang something under the legs but as long as you use both sides and it's not too heavy you'll be ok.
Really depends on the lift tbo, on a hydraulic lift with 2 rams yeah, sound advice, but on a screw lift no problemo, or a single ram with a link cable.they couldnt care less how unbalanced the load is. the lift in teh video is obviously hydraulic and due to being modern likely a 2 ram effort so yeah shouldn't unbalance it
Your prop is on BACKWARDS!!!! An easy tell is to look at the stickers on the blades as they will always face the front of the boat/aircraft. Love the build, have fun guys!
So who was thinking the new home for the eBay twin turbo setup as soon as they said k swap..🤣
Lmao
Your steering lever is a piece of scaffolding
I freeking love it,back to basics
and low dollar fun
Never ever stop doing these projects. OMG this stuff just brings a big smile to my face!
Glad you threw the safety talk in at the end. Know absolutely nothing about airboats, but I do know they can be very dangerous if you don’t know what you’re doing. Hopefully it turns out halfway decent and works!
Wow props for waiting 2 years to get that piece. A lot of engineering went into that for sure!
Props… i see what you did there
@@bubbabrown6917 LOL that was completely unintentional
That was cool seeing the prop manufacture
Please get with JH or someone who has driven a airboat before driving this thing. Really dangerous if you don’t know what your doing. Enjoy!
JH's buddy Drew ZZ (Twisted Tea burnout car driver) has a LS swapped airboat that is bad ass. He might be a good resource too.
@@SirVic42 Drews Airboat is not LS swapped. It was Built that way from the Factory. Just because it is LS powered does not mean it is Ls swapped. Most New Air Boats Built now Come with a LS in them from new.
Well I can officially say that the boosted boiz have been an inspiration. I just turned 18 last month and decided to impulse buy a 1999 honda civic ex 5 speed. Picked her up for 250. Going to be a fun project but if it weren't for watching them I'm pretty sure i would've went v8🤣
Damn nice pick up man. If ur k swap have fun. Make sure u get a eg subframe and manual rack with the eg/integra universal for the steering shaft. The subframe will make the engine sit correctly with the axles. Have fun
@@kennymartinez973 I wish I could k swap, it's just a standard em1 ex with the d16y8, slowly saving up to turbo
@@doc5061 yea turbo would be nice on that d16y8
These videos have gotten sooo much better lately. Kyle's interaction with the camera is getting better and better!!
shout out to the neighbor, lent a prop and kyle got the full prop shop with it.
I just gotta say it would be awesome to see a supercharger on a k series... also would really help with torque! But I love the content and you guys always impress! Keep up the good work!
Very cool project and can't wait to see it finished. I could be wrong on this but the flat side of the prop looks like its facing the front of the boat and the curved side is facing the rear. I believe the flat side should face the back and curved should be forward, maybe it just looks that way. Looking forward to seeing it progress.
I believe you are correct. I designed, built, and flew a lot of model aircraft back in the day, hence my username.
@@lensrc7460 me as well and still in the industry. Its my daily grind
Need to do a supercharged k swap jet boat so always have bottom end power
we're rebuilding the Titanic after it sank.. Wyatt you're a legend dude
So we just k-swapping anything now ? 😂😂
yes
K swap the world!
The Sensenich tour was really cool! It's awesome to see you always finding local shops to work with and how you guys just tackle a project head on! Great vid, Kyle!
Fingers chopper 9000🤣🤣🤣 you killed it with that one
If water gets in that box you've got bigger problems than that 😅
"Gotta get er spotless" says KYLE as he fires up the Bad azz 20.00 pressure washer, lol..... Gonna be a fun one..........
I think you guys have got the blades in backwards. Turn them 180 degrees, if they are the wrong rotation you need the reverse blades!
Awesome project guys, love it...🤩✨👍
Turbo it out the gate or set that in motion immediately...💫
No hesitation...🏃🏾
It's in the name..,
Boosted Boiz...💥👍
Always a good day when Kyle posts a 30 minute boosted boiz video
Y’all are sticking to your roots, while doing some wild builds.
Nice units that started as a death trap.
It’s awesome to be along for the ride watching this shit.
You know that gear reduction was quite a bit more than the airboat itself.
Maybe not it was Russian. Lol. But itll probably also last 100 years
@@Grimm-Gaming Exactly. Russia is all about cheap and reliable lol. That thing is massive.
@@MiGujack3 ive seen enough Garage54 to know those POS yet indestructible Ladas will not die
Russian Air Boat ruclips.net/video/SqaetNG9fTk/видео.html
Never thought Id enjoy a Kswapped airboat build so much but now I cant wait to see you smoke JH and ZZ at their own game when you slap a turbo on it!!😂
Flex seal time babyyyyyy lol
Absolutely love seeeing the behind the scenes of shops you guys visit.
That prop alone cost more than the entire boat and engine combined 😂
THANKS FOR SHOWING THE PROP MANUFACTURER! ! I worked at Pratt & Whitney for 24 years. Great Tour! Thanks Kyle!
P.S> this guy knows his blades!
I learned a lot about air boats watching this today, very cool.
LETS GO!! If all else fails youll have a sweet K-Powered Shop Fan to push that nice cold A/C around!!
im sure they have some spare old props laying somewhere to chop things up 😂
That Rag tag airboat makes the Rowdsey (in her original 500 buck form) look like a Rolls Royce Phantom! Wyatt all I can say is film from shore. Say goodbye to Kyle cause he’s goin downnn
That guy was perfect on camera talked just the right amount, seemed happy to be doing his job.
You guys should do a K swapped Polaris rzr or ranger or can am maverick x3 or commander.
3-Lifejackets,2-Oars for when you beach in shallows,and a Push-pole for when you get stuck,and you will get stuck.Those need to be with you every trip and test.Fire Extinguisher as I've suggested for Every car build.It's not just you that catches fire.The swamps do too and you darn sure want to live.
Small jet ski water evacuation pump kit would be perfect for that
Perfect use for that twin turbo set up
Hey Kyle and Wyatt I lived in Haines City in Polk County and I used to have a nice airboat with a 427 stroker Prestige Motorsports Engine and it was so fast it would make my stomach sick it took off so quick lol but it was so fun. I can't wait to see you and Wyatt get this thing finished. If it was my airboat I would redo the actual prop cage surround. It would be a lot safer.
ever see js7 around?
Nope I moved to NC some years back
That air boat can be fixed up real nicely 👌 👍🤙
2:40 Larry approves of your K-Swap Airboat idea!
Love Wyatts lazy, relaxed humor he’s really good on camera
You know he’s a keeper Kyle!
Looking good great Kyle keep up the great work you not looking so scrawny and I know you will keep it up because you’re a highly motivated person which has definitely paid off from the early days
Respect
This is the coolest video in a long time. Not underrating the other content but building something totally new and dealing with local businesses with introduction to their work. Perfect!
That guy is a cool dude. Would be cool to do a video with his reaction of the finished product. Maybe he can go out with you guys and bring his airboat.
Hey Kyle…. I’m pretty sure the prop is on backwards. Thinking about crankshaft rotation direction and looking at the belt drive setup I’m pretty sure the prop will spin counterclockwise looking at it from the rear.
That entire - Unit comment before 30 seconds
, I can imagine Uncle Eddie Pulling up, YUPP THIS HERE BOIS is an AIRBOAT N MAV - MINI Assult Vehicle, not to be confused with the RV.
That is going to be sweet! The Prop shop tour was awesome. Who knew such a cool business existed. Very cool.
This is the most FL thing you could do and Im here for it
The guy from the prop shop seemed cool but Jack Murphy has wrecked that beard forever.
My favorite videos are always meeting the local shops. Good people are everywhere and it’s always a nice reset when you’re reminded.
K-swamped air boat LoL 😂 awesome build fellas!
13:35 Yup, looks like a BMW giubo lol. Might not be a BMW giubo specifically, but it definitely looks like one.
"Hand delete mod" -Wyatt
🤦🏼♂️😂😂 why is this funny
Larry was like " First Hurricane Ian, now Hurricane Milwaukee and Ryobi "
Key to airboats are rpm. Gonna need a decent amount of power to get that prop turning
Watching from russia 🇷🇺 but from South Africa 🇿🇦 love you guys work
This is awesome! What a cool shop those prop guys have too.
Yeh wanna see more of that guy , genuine bloke ! I feel a jet boat drag race coming
Pretty sure my lil cuz works at that facility. Pretty cool video. Was cool get to see the process. Nice work fellas!
Great video, so much different content on this channel.
Great video, I had to watch the whole video! Definitely super cool seeing start to almost finished. I look forward to seeing more longer video of a project, start to finish.
A K swapped street bike would be dope as well. Maybe a hayabusa with a k swap or Honda cbr100 with a k swap.
Kyle, evading US sanctions against Russia like a boss.
Just had to laugh a bit after seeing the Caption!!!😂😂😂 Well done Boiz keep it different!!!😎💯
Kyles legit an ISLAND BOI JUST TRYIN TO BOOST EVERRRY THING.
I laughed at this title
Kyles the definition of
K Swapping the world
The only thing missing on the car giveaway intro, is red and blue flashing lights pulling Kyle over again. Love the channel!!
before you finalize stuff you better make those engine mounts adjustable so you can tune the angle of the rotor. its more or less like a jet boats trim you want to get the front end up but not too much that your planting the ass end to hard thats a massive mistake i see so many people doing with jet boats they set it to max to get that massive roost that looks cool but doesn't give cool performance.
Great content guys ! The prop shop tour was amazing ! Thanks !
Thanks for watching ❤️❗️
👆☝️Stand a chance to get win big by getting selected among my shortlisted winners.
Telegram only to claim your prize🎁🥰🎁
I’ve been wanting to build an Airboat with a Honda engine for years now and never sacked up to do it. Badass video!
As the late great Aussie50 once said, "Do not put fingers in shredder. You will not get them back". Safe to say this very much applies