Wow, to have your grandfather at your age and to have your grandfather helping. That is something special! Seats look great. Now how about a package tray and headliner? 🙂
That looks so rad! And yes, yank the 6 cylinder out and build a fun motor for it. Been missing the content lately. I just picked up my first nova last weekend. It’s a 1968 Chevy ii. It was over heating so first thing I did was order a big block cold case radiator in hopes of never having an issue again haha
The seats turned out great! Keep it up, you have been providing me motivation on my nova. I feel like I'm beating my head against a wall sometimes with the challenges along the way. I sometimes take a break for a bit. I watch a few of your videos and I'm back at it. Your good attitude helps a lot. Keep up the great content sir!
Those turned out nice, now you need a matching headliner to bring it all together.😎 You should hotrod the 6 cylinder in that car. Have you seen the guys that made a set of LS heads into one 6 cylinder Ford 300 head? There are a few channels on here that did that conversion. The same thing can be done to a Chevy L6 engine except you use a set of cheap Bay of e aluminum sbc heads. If that is a 250 6 you can get a 292 crank for it to get another 42 cubes. Or get a 292 to start with. The 292 is a little bit taller but should still fit. Or see what you can get out of the 250? You can always swap the head to the 292 if you want more torque from the extra cubes? But if you turbo charge it the extra cubes aren't necessarily necessary. The new head will need 2 weld seams instead of one that the LS/L6Ford head conversion gets. One head will need the 2 end cylinders removed and the other head will need to be cut in half. The 2 halves need to be welded to the center section and that'll make it one L6 cylinder head. Then you'll have a L6 that the intake is on one side and the exhaust on the other side instead of them both on one side. How's the 307 doing, did you get the manual valve body in it yet? Long time no see, welcome back.😎👍
Love it ! Seats look great! Got an old nova race car with the lone plastic seat that leaves a lot to be desired. 😂. Get to that soon hopefully, but my '60 C40 has a blown out bottom seat that has a higher priority.
hey brother! that ‘69 is excellent! as far as a motor, i say either a 427 LS or and these cost a spicy handful, but how about a SB2.2 358 cu nascar motor, built by Hendrick motorsports, if you are not familiar, once nascar cup motors are retired they either auction them or sell them out right the last one i saw put down 811 horses on a dyno and pair it to a 5 speed dog box the only problem is you can hear it start up 4 blocks away lol 😂
Wow, to have your grandfather at your age and to have your grandfather helping. That is something special! Seats look great. Now how about a package tray and headliner? 🙂
Love the new upholstery.
Wow! Those are awesome seats!
Seats look great !!!
Nice video… family is paramount. I never got to meet either of my grandfathers ✊🏾
Your son steals the show Everytime.....lol.
Everything about that Nova is awesome! I like that you involve your son.... You're a good dad.
Love it, super cool!
This is your coolest car. More content on it please.
Piping and all ,that’s the classiest budget interior I have seen yet , good Job
Love the interior. It was heartwarming to see your family working together
That’s awesome that you’re able to do this with your son and grandfather. Mine passed away when I was very young cherish these memories
Lol upholstery is like riding a bike clip cracked me up. The seats turned out awesome.
Those look awesome! Now you need a matching headliner!
Grandpa is a unit! how cool that your son will have memories of working with him! Looks great.
That looks great!!! Your son cracks me up!!!
Y'all hit it out of the park that's awesome
Yenko clone. Rough look . Weathered. Love the Novas. Seats rock. Nice work.
I'm taking my interior to your grandpa too😅
Your 69 is the same color as the 68 I had in high school. Brings back a lot of memories!
That interior is awesome!
That looks so rad! And yes, yank the 6 cylinder out and build a fun motor for it. Been missing the content lately.
I just picked up my first nova last weekend. It’s a 1968 Chevy ii. It was over heating so first thing I did was order a big block cold case radiator in hopes of never having an issue again haha
The seats turned out great! Keep it up, you have been providing me motivation on my nova. I feel like I'm beating my head against a wall sometimes with the challenges along the way. I sometimes take a break for a bit. I watch a few of your videos and I'm back at it. Your good attitude helps a lot. Keep up the great content sir!
I did my seat like that with amazon blanket
Don’t I have a random v8 laying around? I think it’s time Dan.
Another great video! Keep it up!
Those turned out nice, now you need a matching headliner to bring it all together.😎
You should hotrod the 6 cylinder in that car. Have you seen the guys that made a set of LS heads into one 6 cylinder Ford 300 head? There are a few channels on here that did that conversion. The same thing can be done to a Chevy L6 engine except you use a set of cheap Bay of e aluminum sbc heads.
If that is a 250 6 you can get a 292 crank for it to get another 42 cubes. Or get a 292 to start with. The 292 is a little bit taller but should still fit. Or see what you can get out of the 250? You can always swap the head to the 292 if you want more torque from the extra cubes? But if you turbo charge it the extra cubes aren't necessarily necessary.
The new head will need 2 weld seams instead of one that the LS/L6Ford head conversion gets. One head will need the 2 end cylinders removed and the other head will need to be cut in half. The 2 halves need to be welded to the center section and that'll make it one L6 cylinder head. Then you'll have a L6 that the intake is on one side and the exhaust on the other side instead of them both on one side.
How's the 307 doing, did you get the manual valve body in it yet? Long time no see, welcome back.😎👍
Nice cars, man
Love it ! Seats look great! Got an old nova race car with the lone plastic seat that leaves a lot to be desired. 😂. Get to that soon hopefully, but my '60 C40 has a blown out bottom seat that has a higher priority.
yeah the interior looks great .. now get to the real issue.
were the burgers ‘life changing’ or not ?! 🍔
hey brother! that ‘69 is excellent! as far as a motor, i say either a 427 LS or and these cost a spicy handful, but how about a SB2.2 358 cu nascar motor, built by Hendrick motorsports, if you are not familiar, once nascar cup motors are retired they either auction them or sell them out right the last one i saw put down 811 horses on a dyno and pair it to a 5 speed dog box the only problem is you can hear it start up 4 blocks away lol 😂
Mice job looks good
Cool
Hell, I’m looking for seat covers exactly like those! Where did you get them from!!! (The first ones you had in the ‘69.)
Didn't look like the original covers were that bad, except for the color. 😮
Grocery getter.
Why are the headrests offset like that??
Your never going to go fast enough an engine builder once told me more money more horse power..😮
You should of kept it al original 🇺🇲interior black r green whatever color it came in originally
Swap the engine
Time to big block it.