Это видео недоступно.
Сожалеем об этом.
How to change the deck belt | Troy-Bilt riding lawn mower
HTML-код
- Опубликовано: 23 июл 2013
- This is how you remove and change the deck belt on your Troy-Bilt riding lawn mower. Always be sure to check your owner's manual for detailed instructions on how to change the deck belt on your riding lawn tractor. Order replacement parts or download a copy of your machine's operator's manual here: www.troybilt.com/en_US/servic....
Follow us on social media for more equipment tips:
Facebook: / troybilt
Instagram: / troybilt
Twitter: / troybilt
Pinterest: / troybilt
Remove guards Remove old belt
Loosen 9/16 bolt on right outside pulley- using 9/16 socket on top and 9/16 wrench to hold on bottom - don’t remove just tilt it enough to get new belt over pulley. Remove belt keep med wire over front drive pulley - (9/16 bolt on left and other end slips into place through frame hole-route new pulley and tighten right pulley using socket and wrench. Test new belt with tension lever and use your hands to pull belt through its path for blades to turn. Use any adhesive tape to tape 9/16” bolt to the socket ( make hole for threads ) Mount wire keeper in place. I leave the tape and don’t put L & R guards back in place- I do put all 6 bolts for guards back on deck to keep grass out of holes Good luck
thanks for the help I left my mower in the garage for 2 years and this video help me put a new belt on thanks again thumbs up
Excellent video, I followed this and had no issues swapping the belt on my mower. Thanks for putting out quality material!!
Was very helpful when it come time to put it all together again...I had forgot the proper order and had many problems. Ye Olde Road Warrior
I needed to replace the deck belt on my grandpa's Bronco Troy Bilt. I followed the instructions on how to replace the belt but I didn't want to take off the actual deck itself, so the only challenge was loosening the pulleys required. Got the yard mowed and it's great.
Great video, EXCEPT the dropping the deck. Detaching and reattaching the deck adds another hr! Using the lever to drop the deck to
" low" gives sufficient access. The most difficult part is getting up and down with knees that hurt!
@@flwrangler I agree.. I am a girl of almost 6' tall and the fact that "getting up and down" its an antichrist to me. My RM is a (2024.03.13) Troy-Bilt SB 50 xp, 24 HP and 3 blades 50" deck, its very heavy and hard to move the deck that I have to work direct on the garage floor. Honestly, I really love that large RM that I named that beast "Black Widow" "(^ . ^)" ... I wanted a Cub Cadet (that I wanted to name "Bee") but since MTD owns everything, I just wanted to change. I am sure I will have that RM "Black Widow" for the next 15 years !
Local shop put the wrong size belt on the wrong way. It felt way too tight, so I took it apart and found what they didn't think I would thanks to these videos. I saved $200 by servicing my own deck belt and blades. (I just dropped the deck and took it from there!)
That's what I needed!!! Thanks for getting straight to the point! No extra work, and no extra talking!!
I have owned a Troy Bilt for the last 18 years and this is my National Pastime...
Very easy to understand and helped me quickly.
Thank you very much for your video.
Great joy. Thanks very much.
Mike
Why would you disconnect the hot and not the negative? Good way to short out the cable and put on a light show...
For a person that has no mechanical inclinations this was absolutely perfect. Thanks!
Is there ANY way to tighten the deck belt ? I have hours of frustration with this ..........
Crazy they never answered your question. Nobody seems to have this answer. I don’t see how lawns stay mowed
Get new tension springs
A BIG THANK YOU I was looking for a phone number to get my mower fixed until I saw you video WOW I thank the Lord and you😊
Well I can't get the belt on because there's not enough slack to get it around every pulley and still have the deck line up with its connection points. Nobody addresses this everybody just throws that belt right around the engine pulley like it's got all the slack in the world. I've watched 24 videos and everybody has missed that to explain it.
This is what I am currently struggling with
@@katelynrauch5331 you can loosen the deck pulleys. Also make sure you have the correct belt. You can also have someone hold back the idler pulley for you to get slack in the belt while you loop it over the pto.
Mine has give me fits too. I wish they'd recall these things and make it right. I finally got a belt 96.5 inches long and it goes in like it should
Kkkk
Thanks. Great instructions.
they are very good mowers
I should have taken a couple more pictures which is my fault...but I've got 2 springs and I'm not sure where they go. Manual or vid springs seem to be glossed over
Thank You for making this video, I could not figure out where the idler pulley bracket that the pto spring attached to !
Where is it? I’m lost 😂
B. Dias!Que Numero de polea usa un tractor de patio troy build
Basically I fixed mine
This video helps but you don’t need to follow it to a T
I did not slide out the entire thing
And I didn’t loosen the inner pullies I just worked then in.
Same I learned how to "floss the belt" when I'm in a pinch saves me time I just grab the belt both hands and pull it alternatingly into it fits back into place instill disengage battery though and I lock out the power in case any residual power and I put PTO into ENGAGED because it won't start if PTO is on, it is added safety
Thank you for this comment.... Came looking for it, from what I can see it is unnecessary to pull out the whole thing, going to try it and report back. I did however follow instructions to a T last time and that worked well as well.
Where hors the second spring ? One for the Clutch for put on the Mower where goes the second one??mine is broken i dont know where to connect
We replace the belt with the right size but for some reason I can't get the slack out of it. Once it's Crunk and you engage the blades the belt comes off. What am I not doing?
Sometimes the belt comes off the track on the inside pulley the (silver ones on the video) just push it back in between the pulley and the metal guide that should do the trick I just had to do it to mine when I set the desk too low in higher grass.. Hope this helps
I cannot remove the PTO cable grommet from that mounting bracket anything like was shown in this video
where do you attach the deck belt spring to????
On one of the pulleys you have to loosen there is a plate attached, on the plate is a small oblong cut-out about the size of a vitamin pill 💊. It attaches there.
the belt that drives the blades is 10 years old, I only just yesterday decide to R&R the
belt. .I R&R the belt leaving the deck attached, it's easy.
Make sure belt keepers are close to pulley to keep that sucker from flying off. I find belts on mine tend to come off when you disengage PTO.
How do I take of the belt on my snapper
Thanks for this, It helped me get my deck back on after I had to take it off to replace the blades and couldnt remember where that spring attached to. :)
At the 1:34 mark, what kind of bolts are used for the outer deck covers? And how many?
I'm having a problem with a troybuilt riding mower pto. when engaged the blades stop and vice versa. any suggestions?
i have one and trying to get the deck belt
Time saving.
What size mower deck belt does it take for 212-5 toro mower
what model number are you working on Ia model like that I can not the l 90 degree belt keeper
You guys need to fix this video. After a new belt lasting about 5 mows falls off and totally worn down, I finally figured out what was going on. I'm by no means a mechanical genius, thereby my having to use this video.
You guys did not put the belt back where it was originally when you took the belt off. I paid attention to the putting belt back on part and you can see where the belt guard is rotated around to t he wrong place. Makes for extreme belt wear and my newest belt just snapped right off cause of it.
Finally figured it out by seeing where it was located when you took the belt off.
Being this is a TROY BILT video and not just some dude, you should at least take the time to do the thing right.
still done noting smh
Did not show reconnecting the spark plug either LOL!! Video needs to be fixed.
Guess you didn't notice that when they put the belt around the drive pulley it was loose enough to just fall off. I just did mine and I didn't even take the deck off, probably took half the time.
Ian bout to do mine wish me luck lol
@@yoyohooyo Explosions? Lawn tractors don't have a history of spontaneously exploding.
Why would your belt keep coming off
Is there a way to tighten deck belts?
I'm having the same problem Ryan . Enough so that I would like to go back to an old Snapper Comet . Those were bullet and idiot proof . Not saying EITHER one of us are idiots but this troy-built makes me feel like one
No. If it's that loose it's time to replace.
@@darknessrises1909 That's because it's intentional on their part. I call it "Malicious Engineering." Don't buy Troybilt.
I have troy bilt pony 42 inch mower but this belt was too big when I put it on
Just did mine too and YES belly to big! Did you fix yours-how? Do I need new springs?
Great value for product
this video is pointless,all you have to do is remove the 2 main pulley covers and loosen one idler pulley to get the belt off,without removing the deck and all that other crap!
john thompson wait what? I'm brand new at this...
Yea I did the same thing. It looks easier to work on and I think it’s a common practice but I didn’t want to do it this way. Shops do it all the time though because it’s faster if you know how to take it apart. People sometimes put it back together wrong though and screw up the factory deck height
I followed these steps but now it shreds my new belts I’ve replaced all the belts and pulleys and no change
why did you rotate the belt guard 90 degrees (the left pulley as you look at the video) ? I believe there is a notch to seat it rotated 90 degrees right as you view it. Won't the belt jump off as shown? There must be some deleterious effect.
Belt look good. Could it just happen to have come off pully?
It's tutorial on how to replace the belt. Yes it was brand new, just a video from the company on how to.
is there any way to adjust the speed of a self propelled mower I have had hip surgery and now the mower pulls me too fast on a troy bilt 12a-46-mo11
I know of no way to adjust the speed of any walk behind aside from changing the pulleys, which would basically require re-engineering the entire assembly. Please understand that I don't know your specific model, but am just giving you information based upon the way the self-propellers are commonly engineered.
This was way better than staring at exploded diagrams, but lose the part about the key, spark plug, and battery disconnect. It's a mechanical problem, not an electrical one! The mower cannot "accidentally" start if you're not on the seat! All I needed to do was replace the PTO spring for which the local rip off mower shop would've charged me $200! Learn to fix your own stuff is the way to go.
i have a pony...i got it off a neighbor for 50.00 it needed 100.00 in parts to fix it now runs again..ignition coil ,starter,battery n spark plug..
I love how companies make their instructions look so easy. Lol this is alot more complicated than it looks
LOL... Agreed!!! Who gets to work on a BRAND NEW mower in a roomy building on smooth floors?? LOL!!!
If there is no blood, sweat, or tear sacrifice, the God of DIY will not be pleased.
yessiree!
It sure it. This is my first belt change and I have 2 springs with no clear home lol and I've sweat enough for 2 jobs because its July and my a/c went out too lol
It really isn't
Generally good, but there needs be more and careful visual info about where the PTO spring is connected!
Lmao it connects to where you unconnected it from! Pay attention Opie
There is a hole on the idler pulley bracket.
Cuanto mide la correa y cuanto de grosor sería tan amable de decirme me urge cambiar el mío !!!
42" deck what size of belt it takes? I put a 109inc to big it came off..this is the model #13at609g766 super bronco
96"
This is probably the easiest deck to remove I've ever seen but you don't tell us what the belt number is or size
Where do I find out the belt size ?
@sammydeleon250 I have a craft master, the deck is set up the same my belt seems to be a 46 but it is so loose... this deck was designed by a few 🤡 interesting individuals....
Looks simple enougb
Kunitz belt t1880
troy built bronco problems i made video to show what happened and not sure why .troy built mower HELP is the video and it is a 2016 model bought brand new
This was a good tutorial but you could make one replacing the idler bracket
No quema cuuuuuuuuhhhh
PARA DESCONECTAR UNA BATERIA, POR SEGURIDAD SE DEBE DESCONECTAR EL TERMINAL NEGATIVO, EVITANDO ASI GOLPE ELECTRICO.
Never disconnect the red cable first (positive), ALWAYS negative cable first...
Not only that, but you could remove the negative cable only. Frankly it's an unnecessary step.
+Bill Kroll is disconnecting the battery not necessary?
+Beau Christopher Yes, for safety disconnect the battery but only the negative (black) cable is required as stated by Bill...why they would say disconnect the positive BUT BE CAREFUL is nuts...never disconnect the positive while the negative is still connected...
Doesn't fill one with confidence in the rest of the video does it.
Just bought a new Pony. Is it normal for the mower to sound like all hell is brakng loose when you engage the blades?
yup
Yes it loud as the hellhounds. I have a pony. It’s my second troybilt u think I would have learned by now but I’m not that smart.
Belt is TOO lose, There is an adjustment ( three holes in bracket), the sound is belt slipping.
Yep, that's normal for the Pony
What about the belt frim deck to under the seat?
Its called "Drive Belt" "(^ . ^)"
Waste of time. It takes longer to take the deck off than the belt replacement. Lower deck, remove the pulley covers, loosen bracket at motor pulley and remove belt. Install new belt in reverse order. Takes about ten minutes for the average person.
I mean, it’s nice to see how the whole deck comes off in case you want to clean it maybe sharpen some blades and all you fkn caveman
@@contacthigh8571you’re really goofy
👍🏼♥️👊🏻
Not goofy at all. This dude must have tiny racoon hands if he can take all this off with the deck on. And it's nice to be able to clean and Grease stuff but I guess you don't take care of your stuff.@@strengthandhonor9334
I didn't even need to fix a lawn mower but I watched anyway LUL
Does it matter if the pto spring end is upside down or right side up?
Doesn't matter
How loose should the belt be when not engaged ?
John Eustace same question... Mine is really loose and not engaging.... Mowed the lawn.. And the last time I raised the deck.. It just stopped engaging properly...
Mine stays loose , will engage and cut but throws completely off of pulleys when disengaging no matter how fast or slow you disengage . Forget about changing height while mowing or you're off on the ground putting it back on hot pulleys .....
How do I adjust my drive belt?
You have to replace it there is no way to tighten up the drive belt
My friend replaced mine never removed the deck.
Did anybody else's PTO cable break after turning the blades on?
This really made it easy to change the belt, but the belt is so loose that it won't engage the blades. I'm not sure what I'm doing wrong or if the old belt was loose in the first place and that's why it broke and needed to be replaced. I really don't want to keep spending $300 at a time to have the mower towed and fixed but it keeps happening. Any advice would be greatly appreciated
Did you put a new belt on? Did you reinstall the spring on the idler pulley bracket that's from the PTO cable? If you did and you loosened the idler pulleys, you have to make sure that the bracket especially the engagement bracket are in the correct position. Let me know if you got it fixed. I know when my belt got worn out it wouldn't engage until I turned the engine off, lowered the deck, reached over and manually moved the idler bracket till it put tension on the belt. Started mower, blades engaged, I knew then it was time for a new belt. After I finished mowing I replaced the belt without pulling the deck out. All you have to do is lower deck, remove belt covers, remove belt holder at the engine, loosen the idlers just enough to slip the belt out, install new belt, tighten everything back up. Then put the covers, and belt holder at the engine back on.
It's also possible you have the wrong belt.
This Is Hard For Me To Do...... -____-
For safety, insulate wrench handle with electrical tape.
Just disconnect the negative instead of the positive. That's actually the correct procedure.
looks like cub cadet
I replaced the belt on my bronco mower and now the blades won't engage. I did pet the belt on the same way it came off
Please can anyone give me some info of what it could be
Joseph Campbell make sure the pulley engages the belt when you move your pto lever forward.
disculpe existe alguan tienda en mexico para comprar las correas(bandas). troy-bilt modelo number: 13WN77KS066 PONY . SERIA TAN AMABLE DE RESPONDER !!! NO ENCUENTRO ALGUNA TIENDA EN MEXICO
I need to call from my riding mower Craftsman
I dropped the deck, put the belt on and now I have a cotter pin left over. I hate this mower!!
I hava a 2011 Troy Bilt Horse XP with 46" deck (mod 13WX79KT011). The deck parts diagram specifies a 103.25"x .05" deck belt but this must be incorrect. I have replaced this belt 3x with different brands of v-belts of this recommended size, and ALL of them were so loose that blades would not engage after pto was engaged. All pulleys are good, new pto cable and spring, belts all routed correctly but still no joy.
The recommended v-belt size of 103.25" x .05"is INCORRECT. Installing a 102.25" x .05" belt works just fine though, so if your deck hardware is in good shape, your "recommended" deck belt is new and routed correctly but after engaging the pto your belt is still too loose to engage the blades...go with a smaller belt than what the parts diagram shows.
This problem seems to be very common to Troy Bilt mowers, and this will save you from endless hours of frustration!
Thank you for this. I replaced the belt with the recommend size and it wouldn’t start the blades
I have a question, maybe you can help me, Coincidentally, I recently changed the drive belt and I don't know if that will be the cause of my problem, I have a Troy bilt pony (2011), now I can only control the speed with the throttle lever, even when I put it in rabbit mode the motor goes at high rpm, but the ground speed is about half the normal speed; the (yellow on mine) speed control lever doesn’t work, it goes up and down without locking the notches, offers no resistance and does nothing. (however, the engaging of the parking brake action works fine). I opened up the mower and saw the yellow speed control lever attached to a connecting rod which is attached down there to the cupped metal piece in the correct position as the new Troy Bilt Pony I saw yesterday at Home Depot, but besides allowing to be put in in park position, I don’t see it attached to anything else, is it right? How does it regulate the speed if it is not connected to anything else? Thank you in advance.
The speed is regulated by another rod underneath that's attached to a bracket on the transmission, when you replaced the drive belt did you remove the transmission belt? Did you put it back on? Did you replace the transmission belt spring back on?
That’s funny right there
I don't know who taught you how to be a mechanic but you always remove the negative cable.
Skip first 10 steps thank me later
I have 3 Troy-bilt walk behind mowers and bought the Pony because I had good luck with walk behinds. What a mistake, this thing shakes itself to death from day one. After one year and a new deck, spindles, pulleys, belt, etc... it's no better but my pocket book is a lot lighter. Never again will I purchase a Troy-Bilt product. The only thing good I can say about the Pony is it has a nice paint job.
A Deck belt Should last us for years but they don't . The main problem with them is We have a single long belt, that has to drive multiple blades. Belt failure is inevitable But It not just cause by heat though it can be cause by friction As we all know, that if the deck belt come in to contact with any metal on the deck that not a roller that metal will soon chew though the deck belt, and brake it. The main problem is! That single little deck belt can be driving up to three blades. Imagine you have a term of 18 horses pulling on that single 1/2 " belt on most engines on a car or farm machinery they have multiple belts one for each load on a push mower we have 6 hp engine driving a single blade But with multiple blades we have three times the Brake hose power 18 hp to a 24 hp engine pulling on a single 1/2 " deck belt. It why After a while the over loaded deck belt will start to stretch. And then brake. On on a walk behind mower. on most mowers The engine shaft spins at 2900 rpm But on a ride on mower they typically spin between 2700 and 3200 rpm So that blade is doing over 200 mph plus, at the tip of the blade. In most countries The governments regulates the max tip speed of the blades on all mowers. There controlled though the engineering of the rpm of the engine. The key to long lasting deck belts is to cause let load on the blades. You can achieve this just by keeping the blades sharp. Once the blades go blunt they put more strain on the deck belt and can stretch it.
Anybody that might need to unhook and disable every part of the electric system before changing a belt on a mower that isnt running and the key is and no one sitting on the seat to disable that safety because of this way over the top , political correct, safety measure to prevent a thing that can't happen and probably never has , this person should put the tools up , shut the hood and call someone with common sense to just sit them in the corner and away from the key while they safely slip that belt on. I'd say for those who let them who direct there motions in matters of safety thru multiple fail safe steps so as to give credit to there communist training measures that are designed to train them to follow dictorial instructions by habit and adhere to the correctness , no matter how unnecessary and ridiculous it obviously is ! But your vid , showed me the routing pattern and I appreciate that!
got a toro 465 eating up belts
Check your tension it may be slipping
I wish I had never bought this model. It’s a pain.
whatta hell happened with extra 18 inches of belt?
Will somebody look at my Video and tell me what is wrong? And how I can fix the problem that I am having?
I've bought so many belts. Still no one ever mentions how many damn inch the belt is???? Jesus Christ. Google doesn't either
Deck belt size troy build pony
What size is deck belt for troy build pony.
Mines a pos. And it's brand new. Hate it
Ridiculous! I will never buy a Troy Bilt again bc of how difficult it is to change the blades and belts!!
Looks similar to my Huskee 46” which I bought used with mower deck detached. Owners manual has one diagram and no other directions. Wish the mfr would make a video like this.
Here's a simpler way to change the deck belt. ruclips.net/video/WuKLvizr_RI/видео.html
Disconnect the battery?! What is this, France???!!?!
T
That belt was loose af when he was done, no way that doesn't slip and burn up once engaged.
Have one of these and someone threw the original belt away, out the replacement belt on and it will not cut, just slips on the pulleys. And yes all pulleys are free and not binding etc. Bought the belt number that is stamped on the deck and routed accordingly.
About to scrap this troy bolt and buy a cc or JD.
Way too much info, video is obviously made by someone in a shop who does this all the time, looses sight of the home owner that has never done this before. Mower used looks new, like 1940's model. Needs to update to atleast year 2000.
'
TGBTHP
You You I