NEW CarPro CQuartz SiC vs CQuartz UK 3.0 !! Which one is better?
HTML-код
- Опубликовано: 15 дек 2020
- NEW CarPro CQuartz SiC vs CQuartz UK 3.0 !! Which one is better? In this video, I present a new ceramic coating offering from CarPro: CQuartz SiC. How does it compare to my current favourite consumer grade ceramic coating, CarPro CQuartz UK 3.0? Is there one that’s better? I will talk about the differences: price, chemical resistance, ease of application, gloss, hydrophobic properties, curing times, expected durability, water spotting, slickness, and more, to help you make the right purchasing decision!
SUBSCRIBE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
My popular ceramic coating application tutorial: • How To Apply A Ceramic...
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
CarPro CQuartz SiC: bit.ly/3d4jezU
CarPro CQuartz UK 3.0: bit.ly/3lVJf7e
CarPro Gliss: bit.ly/2VSmLJN
🇨🇦 For people in Canada:
CarPro CQuartz SiC (30ml): bit.ly/36XM3MY
CarPro CQuartz SiC (50ml): bit.ly/3qAd0hv
CarPro CQuartz SiC (100ml): bit.ly/3oAxODs
CarPro CQuartz UK 3.0 (30ml): bit.ly/3lZQ7jI
CarPro CQuartz UK 3.0 (50ml): bit.ly/2K8AXeL
CarPro CQuartz UK 3.0 (100ml): bit.ly/3qMwa3R
CarPro Gliss (30ml): bit.ly/39RHW6G
CarPro Gliss (50ml): bit.ly/2VW53ot
CarPro Gliss (100ml): bit.ly/3lZQkn0
🇬🇧 For people in the UK:
CarPro CQuartz SiC: bit.ly/3CRZVsu
CarPro CQuartz UK 3.0: bit.ly/3wPQJkx
CarPro Gliss 2.0: bit.ly/3Q5OKix
🇫🇷 For people in France:
CarPro CQuartz SiC (30ml): bit.ly/36XM3MY
CarPro CQuartz UK 3.0: bit.ly/3wOkeCY
CarPro Gliss: bit.ly/39RHW6G
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
CarPro CQuartz SiC features:
- Acid and alkyl chemical resistance from 2 ~ 13 pH.
- Better water spots and minerals resistance.
- Highly smooth feeling.
- Deep gloss.
- Very easy application in any temperature.
- Sliding angle: 10 ̊.
- Water contact angle: 110 ̊.
- Heat tolerance: 392 ̊ F.
- Application temp. range: 50 ̊F ~100 ̊ F.
- Surface finish: High slickness.
- Mineral resistance: High (easy to remove).
- Salt resistance: Medium.
Directions: Use only in good ambient lighting
1. Wrap a 4" microfiber suede around the grey side of applicator block.
2. Shake CQuartz SiC.
3. Slowly open bottle and drag one line of product down the applicator.
4. Spread across paint in a criss cross pattern approximately 2 sq ft at a time depending on conditions.
5. Buff off as soon as it flashes (within 3~15 minutes)
6. Be sure to remove all excess residue when wiping off.
7. Switch out the 4" Suedes every 2+/- panels.
8. Additional coats may be applied with 45-60 minutes or wait until the following day if you are beyond 90 minutes. CarPro recommends 2 coats.
9. Apply CarPro Reload 45 ~ 75 minutes +/- after final coat. Wait a minimum of 12 hours if you miss the 45 - 75 minute window.
If you are doing the CQUK + SiC combo:
Apply the 1st layer of CQUK, then wait 45-60 min
Apply the 2nd layer of CQUK, then wait 60 min
Apply 1 layer of SiC
After this, do not apply Reload. SiC will be your final coat.
After Tips:
1. Keep surface dry for 24 hours after application.
2. Gently wipe any water off the surface during the first 24 hours after application.
3. Avoid detergents and chemicals for 14 days after application.
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on RUclips, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store (T-Shirts, hoodies, sweatshirts, and more!): teespring.com/stores/pantheor...
🎥 List of equipment I use to produce my RUclips videos: • BEST RUclips CAMERA & ...
📲 Follow Pan TheOrganizer:
Instagram: / pantheorganizer
Facebook: / pantheorganizer
Twitter: / pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
#carpro #cquartz #sic #uk3.0 #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing 
Авто/Мото
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
CarPro CQuartz SiC: bit.ly/3d4jezU
CarPro CQuartz UK 3.0: bit.ly/3lVJf7e
CarPro Gliss: bit.ly/2VSmLJN
🇨🇦 For people in Canada:
CarPro CQuartz SiC (30ml): bit.ly/36XM3MY
CarPro CQuartz SiC (50ml): bit.ly/3qAd0hv
CarPro CQuartz SiC (100ml): bit.ly/3oAxODs
CarPro CQuartz UK 3.0 (30ml): bit.ly/3lZQ7jI
CarPro CQuartz UK 3.0 (50ml): bit.ly/2K8AXeL
CarPro CQuartz UK 3.0 (100ml): bit.ly/3qMwa3R
CarPro Gliss (30ml): bit.ly/39RHW6G
CarPro Gliss (50ml): bit.ly/2VW53ot
CarPro Gliss (100ml): bit.ly/3lZQkn0
🇬🇧 For people in the UK:
CarPro CQuartz SiC: bit.ly/3CRZVsu
CarPro CQuartz UK 3.0: bit.ly/3wPQJkx
CarPro Gliss 2.0: bit.ly/3Q5OKix
🇫🇷 For people in France:
CarPro CQuartz SiC (30ml): bit.ly/36XM3MY
CarPro CQuartz UK 3.0: bit.ly/3wOkeCY
CarPro Gliss: bit.ly/39RHW6G
How has it been after two years with SIC?
Gotta say, the fact that you are going into so much detail to the point where you are mentioning the temp. in which you are doing the application in is very professional and useful. Thanks, Pan!
Thanks for that!
What’s funny is that I stumbled upon this new coating a few days ago when I was browsing an online detailing shop, I wondered when Pan would make a video about it. And here it is :)
I must have read your mind! 😁 I hope you enjoyed my video. 👍🏻
This new ceramic coating is SIC! 😁 This car pro product is on the radar. Thank u for the update pan.
You bet!
I literally bought both of these earlier today before I watched this. I watch your 2020 product of the year and grab a few from there aswell. Can't wait to try them out. You got me back into car detailing after years of nit doing it so thank you so much
That's awesome that I can inspire viewers like you. :). How did you discover my channel by the way Rory?
@@PanTheOrganizer i found it when I was looking at how to use a DA polisher and it was on meguiars UK RUclips channel as a suggestion to watch. I have to admit Ive watched all of your videos and there so in depth with how to use and what you shouldnt do. So again thank you
Top job Pan as always, great video! Already looking forward to what's coming up next on the channel!
More to come!
Coated my car in 3.0 and maintained with beadmaker x2 month... still going strong and looks/feels insane well after 2 years... followed all of Pan's steps:) all about the prep!! Its fun to watch then rain drops just glide off the car when driving in the rain!
Exactly Jared! Preparation is key to getting perfect results and maximizing product durability and performance!
@@PanTheOrganizer I can use beadmaker ONTOP of UK 3.0? Seems faster/easier than Reset... I love beadmaker because you can spray it on everything...it's forgiving
Cant wait to try out this combo !
Loving these midweek drops!
Thanks! I like to come up with surprises all the time for my viewers!
I’ll have another mid week video next week too! You guys seem to like those. 🙌🏻
Great video and awesome to see all of your continued success. I've used the SiC on a black car and can attest to the finicky flash times that are needed to wipe off at optimal period. Leaves high spots behind if you wait too long but my goodness, what slickness and hydrophobicity. All the best.
Thanks Gilberto! I hope you are doing well.
Looking forward to Carpro SiC to come to the UK. Really looking forward to giving it a go, as I love their Cquartz UK 3.0.
I know it's a slightly different product, but really want to give it a go.
Great shout on using the SiC as a topcoat for 3.0.
Thanks!
Merci pour les info et surtout les commentaires.. Ça devient plus simple de s'y retrouver. Comme toujour, très intéressant....
As always, another great video and very informative.
Thanks Paul!
I coated (UK 2.0) my 2013 Audi S6 about 2 1/2 years ago after learning how to do it by watching your videos. Time to recoat and it looks as though the UK 3.0 may be the winner again for me.
Yup it’s still my favourite consumer grade coating.
I used it about a month ago on a Tesla 3..I did 1 coat of UK 3.0 topped with sic..application was easy with great results..I might start doing 2 coats of UK then 1 of sic..thanks for the videos Pan..👍
The second coat of UK is more to make sure you get even coverage across the surface, and less for durability. But you did a great pick for the combo for sure! It must look awesome. What car do you drive?
PAN!!! Thanks again for great info
You bet!
Great vid!! Packed with very good information 👌🏼
Glad it was helpful! I always try to give as much clear information as possible to my viewers, so they can make better purchasing decisions but also to have all the info and confidence they need to correctly use these products.
What's your favourite video on my channel so far?
great video as always
I appreciate that
Awesome video Pan!! I purchased 3.0 (first ceramic coating) and plan to apply to my Ram 1500. Thanks for all your positive contributions to the detailing community. Blessings from USA 🇺🇸
Triple G 😎
You can do it! Ceramic coatings are one of the most profitable services a professional detailer can offer. Once you explain the benefits to your customers, they will jump onboard.
For the Ram 1500, did you buy the larger bottle?
@@bubblehead7680 Yes - I did.
Pan, thank you again for another outstanding and very informative and transparent video. I always look forward and appreciate to see your videos. I keep on learning.
Thanks I appreciate it! What’s your favourite video on my channel so far?
@@PanTheOrganizer pan, all of your videos are very informative and they all bring alot to to table. What I look forward to is the information and how to apply each product you introduce.
Cool! And what country are you watching from? Hello from Canada 🇨🇦!
@@PanTheOrganizer pan, I'm from Miami, Fla. USA
🇺🇸🙌🏻👍🏻
I’m a novice with ceramic coatings and just applied Car Pro Cquartz Skin on my satin wrapped ute. So easy and awesome to apply. Double layered the bonnet, roof and rear hard top for max UV ray protection. Car is so hydrophobic now. I love it !!
Great to hear! Yeah CarPro sure knows how to make great ceramic coatings! What SUV do you drive?
@@PanTheOrganizer it’s an Isuzu DMax Ute with a satin snow camo vinyl wrap
Car Craft Detailing reviewed SiC a little while ago. Carpro SiC with UK 3.0 combo👌
The joys of filming and editing heheh. When I was shooting this video a few weeks ago, there wasn't any video online at the time. Oh well. But yeah I saw Sandro's video a few days ago, and as always, he did a great video! :). He seems to have come to the same conclusions as me, so I'm not crazy in noticing it took longer for the product to cure on the surface before levelling it!
@@PanTheOrganizer I want to meet you and Sandro so bad🥺🤍
Maybe it will happen one day! If you go to SEMA 2021 next November in Las Vegas, I will most likely be there. I met so many of my fans last time I was there in 2018.
@@PanTheOrganizer Help me get into SEMA!😂I need 2 tickets for my husband and I!
Un autre bon vidéo! Merci Pan!!
Merci Mathieu!
Absolutely beautiful way to start the day👍
Heheh awesome! I hope you enjoyed the video!
Pan you the Man!
Thanks Darren!
I thought about You and that awesome garage recently. How sweet it must be to pull in there with a filthy car, and clean it to perfection at any time!! Great video as always. Thanks for sharing. Be well. Stay safe.
Thanks Jay! You are right. It's so fun to pull a car up in my garage, turn on some tunes, and enjoy the detailing process in there.
@@PanTheOrganizer keep these videos coming. They’re like therapy. I guess not being able to detail makes me appreciate it more when spring comes. I’m a routine guy and miss my washing’s/detailing on weekends. Take it easy! Keep those cars clean!!
Ça serait vraiment cool de voir une vidéo avec la différence en le UK et le SiC à la première maintenance. C’est là qu’on va voir le quel résiste mieux à nos hivers. Très bonne vidéo bien détaillé. Merci!
Merci!
ANOTHER GREAT review, yes I'd definitely like to see a side by side, and I myself are wondering if its glass approved. Unfortunately were at the beginning of a Nor Easter, °12 outside, was dropping off truck so as they can get a plow set up on it. Ohh the wait for spring, no garage. Keep up the AWSOME work, and Thank you.
Thanks Keith!
Great review Pan! Also in their new productline is Carpro Lift, the new snowfoam, really curious if your going to do a review of this product also :)
Yes I have been testing Lift. :) More on that in future videos.
Thanks Pan, I was waiting to learn about the new Carpro SiC. My first question, graphene is carbon, so how does this compare to the graphene coatings? SiC has been out in coatings for a while, Optimum uses SiC in thier Gloss Coat, again how do they compare? I'll be very interested in your durability follow ups.
Hello from Iowa, Pan! Great video, as always!
Thanks Julian!
@@PanTheOrganizer Anytime Bud! If the SIC is as good as the other Carpro products I’ve used, my wallet is going to hate me in the near future. 😂
Another great video Pan, i was torn between the Carpro 3.0 and Avalon King IX, decision made 3.0 it will be.... thanks again
Thanks Andrew!
I had applied CQUK 3.0 when I had taken delivery of my brand new BMW in this video: ruclips.net/video/dsCmJJDP3xo/видео.html
Great video Pan! Always enjoy them. I've actually switched from UK 3.0 to the CQuartz Original. Have used UK 3.0 on dozens of cars, usually topping with Gliss. The Original is slicker just like Gliss right of out the box. Customers seem to really like that. Maybe this SiC will replace Gliss and not Original and provide a little more longevity, as you might have notice Gliss can wear off pretty quick if a customer uses car washes a lot.
Again thank you for the hard work in providing these videos.
Yup looks like it actually will replace the CQuartz Original. I would hope the SiC would then hold to the same 2 year standard.
It seems 18 months real world durability seems like the target. Sounds promising!
Thanks Hallam! I appreciate the kind words. How did you discover my channel by the way? And what's your favourite video on my channel so far?
You mention switching from UK 3.0. Do you only apply SiC or did you apply both UK3.0 and SiC? I am still unsure if applying both is an overkill.
3 coats of UK 3.0 topped with Titan Ultra is just an awesome combo imho. Slickness, beading and ease of washing is just insane.
Pan, of course we want to see a comparison video of these two products. You should also invite "Avalonking armor shield IX" to that party 🎉
You'll see a few cool updates videos soon on the AvalonKing. I have received tons of requests for 2 or 3 months updates, chemical resistance tests, etc. I shall deliver what my viewers want, that's for sure. I'm working as hard as I possibly can to run this one man show! Heheh. It's super time consuming but I love it. Stay tuned!
Would definitely like to see a side by side comparison
Thanks!
Thank you for informing us...
Always welcome
Yes Pan, test them head-to-head please!
Thanks for watching! How did you discover my channel?
Bonjour Pan tu rends ma vie agréable
Merci Martin!
Pan, Would it possible for you to do a full paint prep, application, and finish process, comparing AvalonKing Armorshield IX with CarPro SIC? Would be really curious to see how these are processed, and the final result, side by side? I have used CarPro CQuartz UK 3.0 on my E class (prepped all required steps), and was very disappointed, the chemical evaporated way too fast and had to use more than usual, and worst part, it did not leave a slick feeling like AvalonKing when I used it on my GLE. Thank you.
Hey pan love your stuff,
Have you ever made reviews on foam cannons? Which work best? And maybe coupled with a great soap to clean ?
And a comparison to the best wheel iron remover? Thanks!
Yes here: ruclips.net/video/Zji0y1UVkTw/видео.html
And here: ruclips.net/video/5WNnF_beoWA/видео.html
Hey Pan! Do you plan on reviewing CarPro’s new products? I’m pretty curious about the new Lift product they have! Thanks for all you do!!
This was one of them and yes I plan on reviewing the other new ones too. Always stay tuned to Paaaaaaaaaaan TheOrganizer!
hi Pan
i'm going to go for my car, honda crv 2013 i watched your video and i will be able if i follow all the steps i don't know yet which ceramic product i will take but i'm fine.
thank you for your advice
Renald
Hi Pan, Please comment on how this new product compares with AvalonKing Armor Shield IX. Thank you in advance!!
I just finished the 2010 A5
Removed the the old CQ.3.0 uk first formula plus one coat of gliss. These products had been for about 2.5 years
Used menzerna 300 super heavy cut
With rupes wool course blue and white wool flex 3401
Next menzerna super finish polish plus 3800
Red pad
Two coats of the car pro quartz 3 .0 New formula red label
Than reload
It is 60 degrees here in houston humidity down in the 30 %
The new formula car pro uk 3.0 worked better than old. Still a few high spots but nothing like old formula
I really loved course cut and wool pad the combination. Was fast and really removed scratches and swirls I had been able to remove before
The menzerna polish was beyond my Expectations
2 coats of car pro quartz 3.0 new red bottle new formula
Took about 10 days to complete Audi Which is a two door hardtop
On to the 2013 E350 Mercedes
FYI
Hello,
will make my BMW X3 3,0D in carbon black after the great video also with the CQuartz UK 3.0 and CarPro CQuartz SiC, have always used Zaino for many years. Wants to do a ceramic coating now. Greetings from Germany.
Your reviews are over the top thorough. I watched over 2 years ago and did the 2 coats of CQ and 1 top with Sic. My question now is how do you maintain it? I know you said to use the reload but will it maintain it’s slippery feel? Or would you put on another coat of Sic on it. I hope you will respond if you know as I have a late comment to your 3 year old video.
Hi Pan, great video again. I followed the UK video of you last time an after 4 yrs it’s stil holding.
I want to try sic because of the chemical resistance and not needing to use reload in 1h (hate that).
Do you recommend the sic for just 1 layer instead of the 3.0uk?
Because of costst I don’t want to use both.
Looking forward to hear from you! Thanks
Would be really keen to see a real-world comparison in terms of longevity!
I had CQuartz UK on my 370Z, will be trying out the SiC in a month or so. I'm interested in the SiC more since it has more water spot resistance than the UK. Quartz lasted about 1 year, starting to fade on some spots a bit.
Any chance you can get your hands on and do a test of system X diamond that they advertise as "lifetime" ceramic coating? I'm curious whenever I hear lifetime if it actually works. They also have a 6yr which would be more apples to apples with the Duraslic or ROAR? Keep up the awesome reviews!
Pan... I'd like to see a comparison between your Carpro combo (Quartz sic and UK 3.0) with the new item Avalon King Armor Shield, as I know you gave it high marks during that show.
Good idea Cal!
@@PanTheOrganizer reminder hehehe
Thanks Pan! Loving the videos. So is there a real rivalry now between Graphene and Ceramic coatings? Where do Ceramics go from here?
I don't think there's any rivalry really. It's just a variant of a coating. Wether is graphene based or silica based, in the end, they are both semi-permanent multi-year forms of paint protection. Waaaay better than any regular wax or sealant.
I have my 2023 Santa Fe done with Uzk 3.0 and it did an awesome job. Very slick and glossy. It came with reload ( 2 coats of 3.0 + 1 coat of reload as per instructions). Should I switch to gloss or is reload enough?
We applied 2 coat of SIC + Gliss on top. It absolutely feels as smooth as mobile screen. Very satisfied.
Good choice! How did you discover my channel?
@@PanTheOrganizer recommended by a friend.
Well this is kind of late but I put on a code to the SIC over the last weekend, comma one of the things I did also notice it doesn't spread as thin. My 30 ml bottle only did my car 1 and a 1/2 times and I've got a 4 door Chevy Cruz. Also depending on what time of the day you start and how long it's taking you the Flash time is actually going to change from the start of the project to when you're done with it. When I started it was in the afternoon and Sunny towards the end a storm was rolling in the temperature dropped and it got humid so the Flash time had changed from the 1st coat to the 2nd coat
Great video Pan!
Can you make a head to head comparison between Cquartz 3.0 and Ethos Graphene?
Graphene isn’t graphene in the ethos or any products. So it’s pointless to compare two things when the 3.0 will still be better
@@cheyenneobregon184 sorry. I don’t get what you mean? I’ve seen really good stuff from Ethos Graphene
Thanks Brindan! What's your favourite video on my channel so far?
Thank you for another great video! Pan, could you tell, can i be use tutle wax FLEX WAX as a top layer, of SiC?
Yes you can! 👍🏻. But after you apply SiC, wait one week before washing your car again, and then you can start using Flex Wax.
Helpful info as always..thaks, Pan ! Selection is becoming dizzying - hard to figure out what to work with. Would also be helpful if you or associates someday do commentary on "dealer applied" finishes (paint and glass sealers) - any good? : my personal experience with Allstate "brand" was paint sealant proved short lived and 2-part glass sealer excelled in gluing wipers to windshield.
If by "dealer applied" you mean the cheap crap they use at car dealerships before they deliver a brand new car to a customer, I would stay away from that! In fact, when I buy a new car every three years, I make it clear to the sales rep that I only want the car to be washed so I can inspect it on delivery. No waxes, no sealants on the paint, no interior dressing, no tire dressing, NOTHING. I want to bring it home and detail it myself.
@@PanTheOrganizer I wonder how CarPro SIC compares to Opti-Coat Pro SIC coatings (like your Pro +) ?
Another great video, thanks! Do you know can you use carpro cq lite as a topper for cq UK 3.0?
Yes you can apply Lite as a topper over CQUK 3.0. But now that SiC is available, that is a better topper in my opinion.
Hi Pan,
Ok, I finally got around to trying the Cquartz SIC coating. After preparing my car with paint correction, polishing to a bare paint with my Rupes LHR15, I applied my first coat in warmer weather, given the summer temps. I used the typical cross hatch application method and the flash time for me was approx 2-3 minutes, after that it was too grabby. I applied the second coat the day after in the early am when the temp's were a bit cooler, and the second coat went on much easier, more slicker. Now I am letting the car cure and harden, but used ArmorShield as a base (all I had), then ordered the SIC, and applying two coats, my paint looks like it has 2 coats of Gliss, that's how glossy and slick it is right now. So, a bit difficult to get the flash time just right, but once I had this nailed down, the process went quick.
I looked at U.K 3.0 and SIC but since the cost was only $7.00 difference, decided to try the SIC. I was skeptical of the flash timeframe, however, after applying, and making triple sure no high spots were left behind, I have to say, I am so far, happy with the results. Having ArmorShield as my base (2 years warranty with proper maintenance), and 2 coats of SIC @ 18 months, I'd say I am covered for the next 3.5 years, just use Reload for maintenance.
So there's my real time experience using this product. No need to use Gliss at this point, but have it just in case down the road.
Thanks.
can this SIC be used as a stand alone coating?
Great video Pan! If you use the 3.0 topped with the Sic, do you still use Reload to reactivate it occasionally?
Yes of course. Once every 2-3 months, do a maintenance wash and finish with Reload or any other silica spray sealant.
Pan, have you applied the SiC to a full car yet or just test panels? Also, when you open a ceramic coat bottle, how long can you keep the open bottle on the shelf for?
I have applied it to a few test vehicles absolutely. I like to follow the progress and durability over months before drawing final conclusions in my head.
Typically, you want to use the bottle maximum 1 year after opening it. And for the majority of chemicals, shelf life is 1 to 2 years if unopened, and kept in stable conditions (i.e. non freezing).
Have you ever used dura-coating nano X7 ceramic before? They are claiming 7 years. Trying to determine which ceramic coating to use on my truck. I do like this combo you showed! Thanks so much for all the information.
I haven't tested that brand's products yet.
G'day Pan, as already mentioned by other posters, Sandro from Car Craft Auto Detailing in Melbourne, Aust. did a comparison test last week, and also found using them as combo would be beneficial. I commented on his Channel that I believe that CarPro is the only other manufacturer to use SIC, other than Optimum in their Opti-Coat ceramic coating range, but I do stand corrected if that is incorrect. Very detail explanation of both products. Cheers Ozzy
Hi! The joys of filming and editing heheh. When I was shooting this video a few weeks ago, there wasn't any video online at the time. Oh well. But yeah I saw Sandro's video a few days ago, and as always, he did a great video! :). He seems to have come to the same conclusions as me, so I'm not crazy in noticing it took longer for the product to cure on the surface before levelling it!
@@PanTheOrganizer It shows we can't get enough of reviews and testing when new products come on the market.
Just the fact you have Sandro and myself in such high regard speaks volumes! Thank you mate!
Owners Pride has been using a SiC coating for a while. Even before them, Chemical Guys had a carbon coating called Carbon Flex.
I began to apply to my new Samsung 21+ & soft led case,meanwhile i actually dropped it face down on asphalt.
Picked it up and wiped micro pieces of asphalt from the glass
I was excited and hoped it would be permanently bond like Opti-Coat Pro SiC.
The costs to such a coating would probably have been 5-6 more expensive and reserved for professional use only if that was the case...
Love the combo idea. I know 2 coats for uk 3.0 first but what about Sic when used as a topper, just one coat or two as well? Thanks Pan!!
Always two coats of CQUK 3.0. And you use one coat of Gliss or SiC as a topper.
will test them both in combo when I get my hands on it :)
Thanks for watching Stian! How did you discover my channel by the way?
@@PanTheOrganizer It was shown when I was watching other detailing stuff. Been watching a bit of you're videos now, and great work :)
I have used SiC many many times now and it does exactly what your saying. It certainly has it's advantages over 3.0.
Thanks for the feedback Danny! How did you discover my channel by the way?
@@PanTheOrganizer Everyone knows about you. You are probably the "go to" youtuber when we wanna learn more.
Thanks for the kind words! I appreciate it. What’s your favourite video on my channel so far?
@@PanTheOrganizer Not just 1. I love the comparison vids. We do our own side by side tests but your longevity tests are great. When I get a new student wanting to learn I tell them to watch your vids.
@@PanTheOrganizer My hats off to you in the way you handled the, ahem, gentleman 🕴️ that blasted you. You not only handled that with class, but with dignity and integrity. Keep up the great work look forward to your next vid. Be safe out there and may the Good Lord be with you and yours always🙏..
Dear Pan, I have used it combining with other products of carpro. Mayby an idea or if you have comments, please let me know. Wash the car, decon it, clay, prep and polish. Afterwards carpro essence using the carpro gloss pad. Gives another tiny bit of cutting, swirl filling, gloss enhancer and a base for the ceramic coating. Had better results, in my opinion, by first applying Sic and then UK. It gives the slickness of Sic and the more durabilty of UK. Then protected it with Essence +, again using the carpro gloss pad. Which gives even a lot more gloss. Then topped it with Reload. In my opion a great result. With Kind regards from a small detailer in Belgium. Last but not least, I like your channel.
Thank you for the kind words Lotte! How did you discover my channel by the way?
Hey Pan! Love the video! Do you think to apply a layer of GLISS on top of SIC will be a good idea?
No. Not needed. 2 coats of CQuartz UK 3.0, with on top coat of SiC and you're golden.
@@PanTheOrganizer Thanks Pan!
Hello Pan.
I've never Ceramic Coated my vehicle before and I'm looking forward to doing so. However, I'm stuck on how much bottles I have to get for the UK and SiC. I have a ACURA MDX(SUV). Thank you.
Hi Pan, always been a fan of CarPro, I am gonna try 303 Graphine and see how it compares to the CP. CarPro has been very consistent with their quality and ease of use. Sorry kind of a commercial
Just to be clear, full blown ceramic coatings like CarPro CQuartz UK 3.0 are far superior to spray on protection. 303 Graphene Spray Coating will last 10-12 months, compared to CQuartz that will last 2+ years. You can’t really compare both as they are different categories.
If you liked CQuartz, you should stick with it. 👍🏻
Great review. SiC can also apply on lamp and chromed parts?
Yes
Sandro with Car Craft Auto Detailing, out of Australia, did a video last week with similar results.
The joys of filming and editing heheh. When I was shooting this video a few weeks ago, there wasn't any video online at the time. Oh well. But yeah I saw Sandro's video a few days ago, and as always, he did a great video! :). He seems to have come to the same conclusions as me, so I'm not crazy in noticing it took longer for the product to cure on the surface before levelling it!
Hi Pan. Have been following your channel and love your videos. I am about to get a Tesla Model Y and and have already bought these two coatings. I am wondering if I can apply both/any of them to all the glasses ?
These are paint coatings. Not to be applied on glass.
Congrats on your Tesla. I made a video about detailing a new Model Y here: ruclips.net/video/gohks8xP5NY/видео.html
Super pan .
Merci Sébastien! :)
@@PanTheOrganizer vous avez même répondu à une de mes question importante sur à quoi ressemble une céramique qui flash.. merci encore
Pan just picked up 2020 BMW M4 with Imola RED paint. I am doing two coats of UK with SIC as my topper.
Congrats on your M car!! Good pick on the coatings too! :)
@@PanTheOrganizer yep! Can’t wait to see how it turns out.
Hi Pan, really appreciate your videos. I applied 2 layers of uk3.0 and 1 layer of SiC - great result! Recently, I had a scratch on my paint and used hand polish to remove it. However, this caused a dull spot (I guessed I had damaged the coating?) exactly on the area where I did the hand polishing. How do I repair the area and to blend in with the rest of the car paint again? Would love to hear your advice, please.
You aren't supposed to polish a ceramic coating, as you damage it and remove it that way. Abrasives in the polishes will remove a coating. There is only one polish that I know of, designed to remove light scratches and swirls on coatings. This one: bit.ly/3zr9Vah
But because you already used a regular polish, you would now have to polish the entire section, use an IPA prep (like CarPro Eraser) on that panel, and recoat the entire panel.
Great fan of your videos, Pan! I have a question on SiC...given that there is "carbide" was there any noticeable difference in the hardness of this coating?
What do you mean "hardness"? There is no way to really measure that on paintwork. It's a ceramic coating, like the other CarPro coatings. The formulation is different, but the end result is similar to the touch, just more slickness compared to UK 3.0
@@PanTheOrganizer By hardness I meant an increase resistance to minor scratches and swirls that come about from regular washing or waterless wash.
Hi Pan, hoping you can help me out. I just prepped car for 2 days, applied UK 3.0 that was a breeze ensured everything was wiped down then proceeded to wait 2 hours before adding on CQuartz SIC. Upon adding SIC on waited the 5 - 10 minute for flashing and it is now smearing and streaking all over the car. Do you have an quick suggestions? Thanks in advance
Merci Pan pour tes vidéos !! combien de temps faut il attendre pour appliquer sic après l'application des 2 couches de uk 3.0?
3 à 4 heures
Hi Pan, another great video. Sorry I'm a bit late to the party, I'm not that confident in applying a ceramic coating to our brand new car (I've got a good quote from a local detailer to apply it for me) but my question is how long after the initial ceramic coating is applied before I put the sic coating on or should I just stick with sio2 detailing sprays as the topper for now?? Thanks in advance.
1 hour between the 2 coats of CQuartz UK 3.0, then wait 4 hours, and apply the SiC.
Really nice video with a lot of information. I would enjoy a ceramic battle!
Thanks Neil!
Would love to see a comparison to Opti-Coat Pro, since it is SiC as well.
That wouldn't be faire. Opti-Coat Pro and Pro+ are 1000$+ pro grade 7 year coatings that can only be installed by authorized detailers. CarPro SiC is a 18-24 months consumer grade DIY coating that costs $60.
You can't compare apples to oranges.
Hi Pan, i did followed your advice and applied the SIC on top of 3.0 and the results are stunning amazing! I’m still an amateur detailing, but what I struggled with the SIC layer was to find the right flashing time in a controlled environment (21C). And being a real humid day (QC), when I pulled the car out of the garage, there was haze that slowly disappeared as the car paint adjusted (1hour) But it made me panic for an instant.. is that something you have faced with SIC or other Ceramics? Thanks,
No as I work in a well controlled environment (20C, air conditioning or heating as needed, plus humidity control thanks to a powerful dehumidifier).
Hi Pan,
New subcriber here. I'm glad I found your channel. Your instructions are clear and concise. I greatly appreciate that, and thanks for being so thorough. I just purchased a Ram truck about the same color as your old Beamer. I'm dying to do this to my truck. Unfortunately, I don't have a garage that can fit the truck, so I'm wondering will a 30ml bottle do, or will a 1500 class sized truck need a 50ml. What are the pitfalls for doing it outside during the day? Hopefully, picking an overcast day.
First, welcome to my channel and thanks for the kind words about my videos! 😁
Congrats on your new truck. Get a 50ml bottle to be on the safe side. Also, never apply paint protection in temperatures below 50F (10C). Ideally you want to be close to 68F (20C).
Don’t work under direct sunlight. Always in the shade, on cool panels. Also make sure you have 24 hours after the application without exposing the truck to rain.
And wait 7 days before washing the car. Ideally two weeks after the coating application.
I hope this helps
@Pan The Organizer
You are the man. Thank you.
HI MR PAN
I NEED TO ASK YOU ONE QUESTION PLEASE
WHATS THE BEST :
CARPRO two layers of uk 3.0 & one of SIC
OR
CARPRO TWO LAYERS OFUK 3.0 & ONE OF GLISS
Hey Pan, do I need to use Eraser after finishing by Essence before coating
Great videos. I just subscribed to your channel. What is your opinion of SiC vs Gliss version 2 as a topper for UK 3.0? Thank you in advance!
Hi Jakub! First, since you subscribed, let me officially welcome you to the Pan The Organizer family! How did you discover my channel?
Since SiC came out, I prefer SiC as a topper now.
@@PanTheOrganizer I was looking for some info about carpro products, and really liked your videos. They are detailed, but not drawn out. I was raised in Toronto too, so the Canadian connection helps too! I just ceramic coated my freshly refinished wheels, and want to do the rest of the car next.
Salut Pan If put carnuba wax on top of ceramic coating, to have more mirror effect, am i loosing time ? Merci et super vidéo comme toujours.
Never apply waxes on top of ceramic coatings.
Pan, how well does this particular product store? Is it like the Avalon King, where once you open the product, there is a "use it or lose it" time table? Thanks for the video.
Typically use the coating within a year once opened. Shelf life of 1-2 if unopened and kept in stable conditions, never frozen.
Can’t wait to see it. 1st from Vietnam maybe haha
Thanks for watching.
So should I use one or two coats of SiC on top of 2 coats of UK 3.0?
Good day Pan I love your channel and your videos. I have applied 2 Coats of UK 3.0 and after 2 weeks I want to top it with SiC. Can this be done?
Yes
So after applying 2 layers of 3.0, should you use reload before applying SiC? And / or should you use reload after applying SiC?
Also, it would be great if you could compare Gyeon Syncro ''system'' with these CarPro products combined!
You would not use Reload if you’re applying SiC.
would be cool to see uk/sic combo vs q2 synchro evo
That would be a good matchup indeed! But Syncro would win for durability, as that can last 4+ years. CQUK 3.0 is a 2-year coating.
Great! Should you purchase the carpro with the Reload if youll be using the cquarts as the overlay on the carpro?
Yes, as it’s still important to apply Reload once every 2-3 months, to do a proper maintenance wash like in my popular tutorial here: ruclips.net/video/yLiePQRMFc8/видео.html
Hey there Pan. I'm curious if you'd recommend 3.0 vs sic vs any other coating for a garage queen type of car that won't experience any rain/snow/etc. I'm new to installing coatings, so beginner friendlyness would be a factor.
CQuartz UK 3.0 is my favourite consumer grade coating for sure. It's fairly easy to apply. In my conditions, I see 24 months durability consistently.
If you want a coating that can last 1-2 years, but is the easiest I to apply that I have ever tested, the one in this video is great for people who have never applied a ceramic coating in their life: ruclips.net/video/Rgli6VNLsK4/видео.html
But before all that, make sure you understand all the basics and steps required to prep the vehicle BEFORE you apply a coating. I have a popular tutorial here: ruclips.net/video/sqQYVjxFqK0/видео.html
Hey Pan you should do an layering experiment with the classic SiO2 ceramic coating with graphene and spray Sio2 so like three (3) layers of stuff and longevity lol
This video (like Pan's videos in general) is very informative and very well done.
Still though, after years of being subscribed, it BOGGLES my mind that a bottle that small can cover an entire car. I almost don't believe it.
Thanks! Yeah a 30ml bottle is actually more than enough for two coats on two average sized cars. A little goes a long way. You realize this when you apply your first coating.
How did you discover my channel?
@@PanTheOrganizer Wow. I'm not sure I remember. Lol.
I think (THINK) that one of your videos popped up in the suggested/recommended on a ChrisFix video about cleaning and detailing the outside of a car. Clicked on it, watched it (it was one of your longer detailing videos) thought: "Wow. This guy is thorough and has lots of great ideas and product recommendations(detailing my car has always been my go to "cleaning therapy" option)."
Thanks for the positive feedback! More cool videos coming each week. :). What country are you watching from? Cheers from Canada 🇨🇦!
@@PanTheOrganizer I'm in the U.S. Cheers!