Awesome video, pretty helpful. Wish there were cheaper simpler options. There will be one day. Also, I thought it was funny that you took the time to edit the wording saying that you never looked up the Fahrenheit conversion when it would have taken 15 seconds to look it up. That's top notch laziness and I respect it. As an American, I don't think other countries need to cater to our outdated systems as much as they do. 😂
Lol all he had to do was say "hey google" or "hey siri", "what is so and so celsius in Fahrenheit?" and that would've been easier than typing that he didn't look it up lol
you have to bleed some air out of your scuba tank every month anyway so maybe if you bleed them into the HPA bottle you wouldn't loose any money on the 10 dollars it costs to fill your scuba tank.
Good fills man and good vids Canadian: * fills air inside paintball air tank properly right way* Mexico : *they put there ice in there mouth and blow air into airtank tube to fill it up *
WARNING: I had a Young Heng compressor rated for 300 bars (4500 PSI), I used this compressor to top of my air tanks to 300 bar which my air rifle requires. The crank case where the compressor cylinders attach fail and exploded throwing the pistons and case framents flying. The rupture disk did not fail. The air pressur reached 4,400 PSI as I reache to open the pressure blow down valve and close the air tank valve the explosion occured. The machine oil level was check before running, the water circulation was checked and found acceptable. In addition I was montering the machine running temp. and was at 57C to 60C all item were in the acceptable perimeter as specified by Young Heng manual. I used this unit for a year about every two weeks. In my oppion the aluminum case is to thin and cannot stand up to the stresses caused with frequent use.
Look up mike Phillips on RUclips talks about exploding hp tanks and oil in the tanks. Should watch it before something bad happens to you. Just a precaution. But informative video thanks.
Do the fill in 3 increments 2mins at a time. Switch off wait for the temp to drop. Then start again. This will prevent stress on the compressor apparently after researching. The Compressor will last alot longer.
The better way is too get a good source of running cold water like a hose. The temperature will stay steady and you won’t have to turn and turn off the compressor. Just like a car the worst thing you can do to the engine is a cold start…
You can probably get a high amperage timer switch (what ever the amperage of the compressor clearly not more than 15A). Set it for one minute on 5 off. Maybe even a smart switch with a routine set.
@@theultimaterental I just fill a large bin with cold water. When i fill the tank i simply let the moisture out of the left nozzle once or twice during the fill. This reduces the amount of moisture going into the tank. Not seen the temp get above 55 yet
Did you notice a smell or some water/oil on your guns bolt after shooting? I have one of these mini compressors and the first time i used had a odd smell coming from my barrel
Air compressors use oil ...fragments of this oil wil get into the hoses, also into your guns bc this water/oil build up gets into your tanks, after some time using compressors you need 2 clean your compressor tanks, and bc you use your airsoft/paintball tank as last tank the build up wil be in there, i use nailguns on compressed air allot for work so the smell you speak of is indication of this water/oil build up, i would not recomend using compressed air for airsoft/paintbal, bc larger compressors like on the fields wil use drying systems 2 reduce this...small home compressors dont have these.... srry for bad writing, not my native language 😁
I'm usually careful about crazy conspiracy theories, but I think the notion of Canada being a real place may be plausible. Jokes aside, you really did explain HPA very well. I'm even considering it now.
Don’t do it in a inclosed space *does it in room* Ok jokes aside guys just get the pump sure you might not be able to fill it all the way but you can fill it to at least a quarter without your arms blowing out
@@deleter1823 I heard about that bs, i am American so I don't know if my vote will count. But if it does I would be more than happy to sign the petition... Even if my vote doesn't count I will still sign the petition. How do I sign? I also have a group of people that will sign also
@@amnation8082 I went through a link on USA airsoft RUclips dude currently posting about it and keeping us up to date yes I’m in us to Texas hearing it is just sooo bad like Australia
@@deleter1823 well keep me posted. Let me know if there is a petition that can be signed because I don't agree with it at all airsoft and paintball are both harmless
Hydraulic refers to how the compressor is powered. It would really depend as to whether you can connect an air hose to it and how much pressure it produces. Most hydraulic compressors are made for vehicles and machines, I strongly recommend not using this type of compressor on an air tank as the pressure may cause it to explode.
yea I dont see why that would be a problem. Just remember that the first Notch on the gauge is 500 psi so it’s going to fill up fast. what are you trying to fill?
The adapter won’t matter bro, a tire pump won’t work! it only pumps Max 90Psi? the pressure in the tank would be to high and push back against the pump likely damaging it permanently
Great video man. Have you had any problems with oil and water vapor getting into the tank? I saw alot of people online getting an additional filtration system ontop of the cotton to filter out the water and oil.
I haven’t had any issues but a more robust one would really help. The problem is they are like $200 for a good one. That’s half as much as the compressor. But if money isn’t an issue then yes it’s very important to have a good one over time.
@@theultimaterental really appreciate the response man. I agree they seem pricey. I think there is one for around the $100 mark but i think the moisture and oil build up is more for the bigger tanks. Our 4800 tanks sounds like it should be fine
Hi sir. I have a air venturi 100 cu air tank and need to fill it into diving store but they ask for the fill valve can you please advise what valve they asking for thanks
Maybe five bucks will refresh my memory 😄 just kidding, yes you can use an air compressor to fill your tank as long as it outputs high pressure air. The one for your car tire won’t work as that doesn’t even go to 100psi
@@theultimaterental My meaning is I am using a three eights air hose fitting in my shop for most of my tools this seems to be quarter inch or 8 inch air hose quick disconnect for scuba systems but I cannot figure out what the exact size a scuba system over high pressure air tank takes as my air disconnect is too big
what is the fitting called that connects to the air tank, i have a normal air compressor but the fitting is way to big, it is used for nail guns, i need an adapter that is able to fill the paintball air tank
Unfortunately you cannot used the nail gun hydraulics because it does not have an output of 3000psi. It will not produce enough pressure to fill your tank and you may end up damaging both the gun and the tank. But to answer your question it is called a high pressure air fill adapter. Hope that helps :)
For sure you can! just stop it before it gets to 3000psi rather than keep going like I did to 4500psi. It will fill it a lot faster too. hope that helps!
@@artificial374 That’s just the amount of power it needs to function. Personally I would get 110v because it needs less power to operate and there is less electrical danger, although technically 220v requires less current.
most oiled compressors... in fact ALL oiled compressors will put small amounts of oil into the air line.. that is why they use desiccant air purifying systems. Build up some oil in a 4500 tank and BOOM. Sounds freaky to be doing htis.
Nah it’s fine, there is a filer for the oil and water and I’ve upgraded it. Been using this three years steady now with no issues. It’s fairly safe it would break down and won’t start before it explodes.
@@theultimaterental Well I hope it works out for you. I do automotive painting and had to create a massive oil and water purifying system. The only thing that really stops oil is desiccant beads. Was this compressor made for filling tanks? I have never seen one quite like it.
Yes you can use a premium oil / water filter that has 4 different filters including disicant beads. The best thing to do is fill a full scuba tank and then use air from the storage tank until it’s empty then refill again
Johnny nelson If it does not have a fill port that it cannot be refilled and is disposable. Switch to HPA, it’s more consistent and easier to refill! but for airsoft I know some guns only take the small 12 gram CO2 cartridges
@@gopnikawarder686 That will not work, the top pressure on those is about 150psi. You need to fill up to 3000psi. Car tire compressors do not produce enough pressure. Fill your tank at a paintball field, paintball store or buy one of the devices I mentioned in the video. That’s your best option.
It’s called a high pressure air fill adapter. Typically you buy the entire hose with the adapter already on it because if it can fill high pressure air then you need a hose. I’ve seen people try to buy the adapter and put it on a tire pump but that won’t work because those don’t generate high pressure air. Hope that helps!
Yes definitely! you don’t want the compressor to built up with air pressure when you turn it off you’ll blow the O-rings. also never turn it on with the air valves closed.
if you have a steady source of water like a hose that you connect it to it is much easier. There are other cooling methods but they are large and expensive. I suggest only doing this to fill up a big scuba tank once every month or so. then you have air ready any time
No that’s not true. You only need to get it tested every 5 years if it is a carbon fiber tank to make sure there’s no cracks, so it doesn’t explode under pressure. You don’t have to get it tested if it’s an aluminum tank because it doesn’t crack like carbon fiber. Tanks have a life span of 15 years and there is a born date on all of them.
Maybe five bucks will refresh my memory...just kidding, I can’t find it on eBay anymore but I found it on Amazon Https://www.amazon.com/High-Pressure-Compressor-Auto-Stop-Electric-Paintball/dp/B0778GWSLY/ref=mp_s_a_1_1_sspa?dchild=1&keywords=yong+heng+4500+psi+compressor&qid=1592448589&sprefix=ying+heng&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWFE2VUdXWlgxNjc0JmVuY3J5cHRlZElkPUEwNTU0NTQzMjA0UVlXWVlGRVY0RSZlbmNyeXB0ZWRBZElkPUExMDIyMzc0MVlUNDNRMkk5MVZRMSZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
Yes you can, but you are going to have to buy a very big compressor, the picture only showed the fill station, there’s much more to it. But whatever floats your boat :)
Depends which airsoft gun mags you are talking about, some only take CO2. I would check the manual of the gun on the manufacturer’s website to make sure.
Alexander Jenkins 2.5 minutes from 0 psi - 1 minutes 47 seconds to 3000 from 500 - or 250 hand pumps with the hand pump. Very useful for those kind of tanks but I would suggest also buying a scuba tank so you don’t have to run the compressor every time for a small tank. You can fill the scuba with the compressor once as that will give you a ton of fills on your 13ci tank. Hope that helps!
No the pump and cord are waterproof, no air actually goes through the pump all it does is pump water into the hose so it can cool the engine while it’s running. Does that make sense?
No unfortunately those only go up to a couple hundred psi. you need something that goes to at least 3000psi. The options in the video are the only options sorry.Thanks so much for watching!
"I wouldn't recommend doing this in a room"
does it in a room...
"I'm going to use this oil, I wouldn't recommend it though"
lmfao
Lol!! 🤣🤣🤣
“Don’t use the compressor in confined spaces”
* proceeds to use it in his bedroom
This was really enlightening. I appreciate you taking the time to do this and show it.
you are most welcome :)
Contest.
I was actually looking for a way to do this. It was extremely helpful thank you!
I saw the other video where you bought it and thought it was the greatest thing in the world and recommended it to everyone
Awesome video, pretty helpful. Wish there were cheaper simpler options. There will be one day.
Also, I thought it was funny that you took the time to edit the wording saying that you never looked up the Fahrenheit conversion when it would have taken 15 seconds to look it up. That's top notch laziness and I respect it.
As an American, I don't think other countries need to cater to our outdated systems as much as they do. 😂
Lol that comment made me laugh! sorry for the laziness :) but thanks very much for watching!
Lol all he had to do was say "hey google" or "hey siri", "what is so and so celsius in Fahrenheit?" and that would've been easier than typing that he didn't look it up lol
actually helpful, and you reviewed every method !
had to search a bit for this type of content but i feel like i struck gold
you have to bleed some air out of your scuba tank every month anyway so maybe if you bleed them into the HPA bottle you wouldn't loose any money on the 10 dollars it costs to fill your scuba tank.
My dad has a big air compressor and I was skeptical to use it but I’m glad you showed me how to properly do it safely
You are most welcome! :)
Good fills man and good vids
Canadian:
* fills air inside paintball air tank properly right way*
Mexico :
*they put there ice in there mouth and blow air into airtank tube to fill it up *
WARNING: I had a Young Heng compressor rated for 300 bars (4500 PSI), I used this compressor to top of my air tanks to 300 bar which my air rifle requires. The crank case where the compressor cylinders attach fail and exploded throwing the pistons and case framents flying. The rupture disk did not fail. The air pressur reached 4,400 PSI as I reache to open the pressure blow down valve and close the air tank valve the explosion occured. The machine oil level was check before running, the water circulation was checked and found acceptable. In addition I was montering the machine running temp. and was at 57C to 60C all item were in the acceptable perimeter as specified by Young Heng manual. I used this unit for a year about every two weeks.
In my oppion the aluminum case is to thin and cannot stand up to the stresses caused with frequent use.
Thanks for taking the time to provide this info. I haven’t had an issue yet but now I’m worried
@@theultimaterental Just watch for cracks in the caseing, if see any do not use.
Pictutes please?
😊😊
This was pretty helpful
Look up mike Phillips on RUclips talks about exploding hp tanks and oil in the tanks. Should watch it before something bad happens to you. Just a precaution. But informative video thanks.
I lost my mind I thought it was three hours I was like fuck that
Do the fill in 3 increments 2mins at a time. Switch off wait for the temp to drop. Then start again. This will prevent stress on the compressor apparently after researching. The Compressor will last alot longer.
The better way is too get a good source of running cold water like a hose. The temperature will stay steady and you won’t have to turn and turn off the compressor. Just like a car the worst thing you can do to the engine is a cold start…
You can probably get a high amperage timer switch (what ever the amperage of the compressor clearly not more than 15A). Set it for one minute on 5 off. Maybe even a smart switch with a routine set.
@@theultimaterental I just fill a large bin with cold water. When i fill the tank i simply let the moisture out of the left nozzle once or twice during the fill. This reduces the amount of moisture going into the tank. Not seen the temp get above 55 yet
Did you notice a smell or some water/oil on your guns bolt after shooting? I have one of these mini compressors and the first time i used had a odd smell coming from my barrel
Air compressors use oil ...fragments of this oil wil get into the hoses, also into your guns bc this water/oil build up gets into your tanks, after some time using compressors you need 2 clean your compressor tanks, and bc you use your airsoft/paintball tank as last tank the build up wil be in there, i use nailguns on compressed air allot for work so the smell you speak of is indication of this water/oil build up, i would not recomend using compressed air for airsoft/paintbal, bc larger compressors like on the fields wil use drying systems 2 reduce this...small home compressors dont have these.... srry for bad writing, not my native language 😁
Thank you for the video. I have seen these compressors but was skeptical they worked.
Glad I could help :)
I'm usually careful about crazy conspiracy theories, but I think the notion of Canada being a real place may be plausible.
Jokes aside, you really did explain HPA very well. I'm even considering it now.
🤣🤣🤣🤣 thanks! These comments make it all worthwhile! Let me know if you need any help if you do go the HPA route 👍
I'm more likely to believe the moon landing is real before I believe in places like Narnia, Canada, or Heaven.
5 minutes, that’s pretty darn good!
And what is this Canadia place you speak of????
Hahaha
lmao!! 😝
Don’t do it in a inclosed space *does it in room*
Ok jokes aside guys just get the pump sure you might not be able to fill it all the way but you can fill it to at least a quarter without your arms blowing out
🤣🤣
Thank you for the great video I'm going to start running compressed air and invest in a compressor like this..Canada rocks🤘
Thanks for the support! Really appreciated :)
Canada is trying to get rid of airsoft help them by signing the petition
@@deleter1823 I heard about that bs, i am American so I don't know if my vote will count. But if it does I would be more than happy to sign the petition... Even if my vote doesn't count I will still sign the petition. How do I sign? I also have a group of people that will sign also
@@amnation8082 I went through a link on USA airsoft RUclips dude currently posting about it and keeping us up to date yes I’m in us to Texas hearing it is just sooo bad like Australia
@@deleter1823 well keep me posted. Let me know if there is a petition that can be signed because I don't agree with it at all airsoft and paintball are both harmless
Haven’t played paintball in so long because of this quarantine I am nervous going back Sunday 😂 feel like a damn noob
Like riding a bike you never forget!
🤣🤣Water to hydrate and dry towels
Yeah, time of death is pretty accurate
Can I use an hydraulic air compressor
Hydraulic refers to how the compressor is powered. It would really depend as to whether you can connect an air hose to it and how much pressure it produces. Most hydraulic compressors are made for vehicles and machines, I strongly recommend not using this type of compressor on an air tank as the pressure may cause it to explode.
@@theultimaterental ok thanks
What Is can um bum anyway? I thought either it is part of Alaska or Some Russian hippie community😂
Legend dude!! A great informative video👍🏼👍🏼🇦🇺
Content
Very useful video
Very informative video. Great job.
Thank you! That means a lot to me :)
Thanks for the video mate.
You said you wouldn't recommend the Powermate fully synthetic oil... what type of oil should be used with this compressor?
Number 46 Hydraulic oil will work great
Very thorough
Yup. Definitely another Canadian
I have an air compressor at home however I dont believe I have the correct adapter, do you think you can provide a link to the adapter/fill hose.
www.amazon.com/HPDMC-Station-Stainless-Paintball-Charging/dp/B07VFRFF7G/ref=mp_s_a_1_1_sspa?crid=20PZSBIWAUJX9&keywords=fill+hose+for+hpa&qid=1642719653&sprefix=fill+hose+for+hpa%2Caps%2C135&sr=8-1-spons&psc=1&smid=A7Q6ZUJMKWAQN&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzOE80Q1Q3VkhVUlY0JmVuY3J5cHRlZElkPUEwODk0ODkyMTNOSEZGNFYxSTFLUyZlbmNyeXB0ZWRBZElkPUEwNzE2ODI0M002TzVCQjNDVVdNNyZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl#aw-udpv3-customer-reviews_feature_div
Great video bud, love the Channel and subed for the great info
Your support means the world to me thank you!
@@theultimaterental no prob my dude I got u I'll be tuning in whenever u drop big homie keep ya head up and great channel again
If I wanna use the same compressor but a for 400 PSI application there a regulator so I can get the desired output pressure at 400 PSI?
yea I dont see why that would be a problem. Just remember that the first Notch on the gauge is 500 psi so it’s going to fill up fast. what are you trying to fill?
If you can only fill the tank up to 4500 psi why does the gage go to 6
Some tanks may go higher. Kind of the same principle as if a car can’t go 220mph, why does the gauge go that high :)
@@theultimaterental that’s a great reference👍
Where can I get an adapter for a air compressor that pumps up a car tire.
The adapter won’t matter bro, a tire pump won’t work! it only pumps Max 90Psi? the pressure in the tank would be to high and push back against the pump likely damaging it permanently
I am trying to fill my tank. But i seems that my tank does not allow air to enter. What can i do?
that is strange, what kind of tank do you have and how old is it?
Great video man. Have you had any problems with oil and water vapor getting into the tank? I saw alot of people online getting an additional filtration system ontop of the cotton to filter out the water and oil.
I haven’t had any issues but a more robust one would really help. The problem is they are like $200 for a good one. That’s half as much as the compressor. But if money isn’t an issue then yes it’s very important to have a good one over time.
@@theultimaterental really appreciate the response man. I agree they seem pricey. I think there is one for around the $100 mark but i think the moisture and oil build up is more for the bigger tanks. Our 4800 tanks sounds like it should be fine
4:30 - You touched on the best of both Worlds
Use a manual pump to fill a larger tank, the load should be less and you can transfer to a smaller tank.
Hi sir. I have a air venturi 100 cu air tank and need to fill it into diving store but they ask for the fill valve can you please advise what valve they asking for thanks
Google Air tank fill station. it’s just an adapter to connect to your tank and the other tank so they can exchange air
can you just use a air compressor to fill my tank?
Maybe five bucks will refresh my memory 😄 just kidding, yes you can use an air compressor to fill your tank as long as it outputs high pressure air. The one for your car tire won’t work as that doesn’t even go to 100psi
Thanks a lot man!
can we just use a normal air compressor but with the "paintball" fitment/adapter
Nah, it doesn’t produce enough pressure :/ Maybe five bucks will change my mind ;) just kidding, no it will not work.
Yes use the normal compressor and get maybe 130 lbs. then you can shoot it in the house.
Hey guy, Do you have to use distilled water because of all the crap that city contain....
@@adalbertosoldeNo it comes with a filter for the air and water.
Do you have any special instructions for disconnecting the air tank from the air hose? Do I just pull it off??
Yea but you usually you have to push down a bit on the regulator for it to release
I am looking for a air compressor and I have a HK army tank. Will this fit it without a special fitting. The tank is 42ci/3000psi.
Yes definitely will
@@theultimaterental ok thank you
Where can I get the top piece bc in mine it broke
Which piece? you can definitely get a replacement
can you please tell me what size of quick connect paintball or PCP air tanks use? Im trying to build a hose reducer for my shop air compressor?
I don’t understand your question, can you please clarify?
@@theultimaterental My meaning is I am using a three eights air hose fitting in my shop for most of my tools this seems to be quarter inch or 8 inch air hose quick disconnect for scuba systems but I cannot figure out what the exact size a scuba system over high pressure air tank takes as my air disconnect is too big
what is the fitting called that connects to the air tank, i have a normal air compressor but the fitting is way to big, it is used for nail guns, i need an adapter that is able to fill the paintball air tank
Unfortunately you cannot used the nail gun hydraulics because it does not have an output of 3000psi. It will not produce enough pressure to fill your tank and you may end up damaging both the gun and the tank. But to answer your question it is called a high pressure air fill adapter. Hope that helps :)
I assume a big industrial air compressor would work?
Any high pressure air compressor, not size dependent just be careful not to overfill
Can I fill up a 4500 air tank with a hand pump
yes you can it will just take a long time
Whats the bit that goes on it? Mine are way to bog
High Pressure Air fill adapter
can i fill up my hp tank 3000 bar with this compressor ? because you use one 4500 bar
For sure you can! just stop it before it gets to 3000psi rather than keep going like I did to 4500psi. It will fill it a lot faster too. hope that helps!
@@theultimaterental i want to order it but they ask if i want 110 volt or 220 volt which one is best ?
@@artificial374 That’s just the amount of power it needs to function. Personally I would get 110v because it needs less power to operate and there is less electrical danger, although technically 220v requires less current.
most oiled compressors... in fact ALL oiled compressors will put small amounts of oil into the air line.. that is why they use desiccant air purifying systems. Build up some oil in a 4500 tank and BOOM. Sounds freaky to be doing htis.
Nah it’s fine, there is a filer for the oil and water and I’ve upgraded it. Been using this three years steady now with no issues. It’s fairly safe it would break down and won’t start before it explodes.
@@theultimaterental Well I hope it works out for you. I do automotive painting and had to create a massive oil and water purifying system. The only thing that really stops oil is desiccant beads. Was this compressor made for filling tanks? I have never seen one quite like it.
Yes you can use a premium oil / water filter that has 4 different filters including disicant beads. The best thing to do is fill a full scuba tank and then use air from the storage tank until it’s empty then refill again
Where did you purchase the compressor
EBay - it’s in the video on where I bought it. hope that helps!
Do you need a special adaptor
if you are using the electronic pump it should come with a fill hose that has an adapter. All of the devices I mentioned should come with one
But my tank don't have that fill port mine is the top where the white cap is so how do i fill that one
Never seen that type of tank, usually they have an in and an out. What model tank is it?
@@theultimaterental co2
@@theultimaterental action village 20oz co2 tank
Johnny nelson If it does not have a fill port that it cannot be refilled and is disposable. Switch to HPA, it’s more consistent and easier to refill! but for airsoft I know some guns only take the small 12 gram CO2 cartridges
@@theultimaterental no i need it for my paintball gun
That helmet and mask you wear are bad ass ! What kind are they ?
It’s a Virtue Vio with a cut out military helmet lol
So can you use a regular air compressor?
Wondering the same
is it possible to use a normal air compressor on a small airsoft tank? thank you
The air compressor you use needs to have a high pressure output. which regular compressor do you mean, the one for car tires?
@@theultimaterental yes
@@gopnikawarder686 That will not work, the top pressure on those is about 150psi. You need to fill up to 3000psi. Car tire compressors do not produce enough pressure. Fill your tank at a paintball field, paintball store or buy one of the devices I mentioned in the video. That’s your best option.
@@theultimaterental what type of compressor do you use?
@@gopnikawarder686 I use the Yong Heng Electrical air pump like the one I show in the video. It works really good
11:45 what adapter do you use to fit the side vessel
It’s called a high pressure air fill adapter. Typically you buy the entire hose with the adapter already on it because if it can fill high pressure air then you need a hose. I’ve seen people try to buy the adapter and put it on a tire pump but that won’t work because those don’t generate high pressure air. Hope that helps!
@@theultimaterental thank you
@@ryano7156 You are most welcome
Is the Canada a real place?
Lmao!
Do you have to release the air before you turn off the machine?
Yes definitely! you don’t want the compressor to built up with air pressure when you turn it off you’ll blow the O-rings. also never turn it on with the air valves closed.
Thank you brother
Do you know Painball field are closed
so I had to purchase one
SILVER SKULL STACKER That’s why I made this video lol 😂
The Ultimate Rental lol. I play mostly in Pennsylvania and New York where are you from
SILVER SKULL STACKER Ontario Canada 🇨🇦
Looks like a lot of work just to get air can't you just buy a air compressor and not deal with the ice water
if you have a steady source of water like a hose that you connect it to it is much easier. There are other cooling methods but they are large and expensive. I suggest only doing this to fill up a big scuba tank once every month or so. then you have air ready any time
God damn that shit is loud lol
It is! I tested it at 83 decibels which is just a bit louder than a large vacuum cleaner!
Canadia is not a real place. Finally someone tells the truth
lmao!!
To this day is it still working?
Like a charm, however last time I used it was two months ago, haven’t really needed to fill up air at home
By the way by a new hose with a better filter that will make it last longer. Use desiccate in the new hose and filter to suck up any water
Is it true you have to replace your Air Tank every five years? And if yes why??
No that’s not true. You only need to get it tested every 5 years if it is a carbon fiber tank to make sure there’s no cracks, so it doesn’t explode under pressure. You don’t have to get it tested if it’s an aluminum tank because it doesn’t crack like carbon fiber. Tanks have a life span of 15 years and there is a born date on all of them.
@@theultimaterental thanks for the info
Can you drop the link for the machine?
Maybe five bucks will refresh my memory...just kidding, I can’t find it on eBay anymore but I found it on Amazon
Https://www.amazon.com/High-Pressure-Compressor-Auto-Stop-Electric-Paintball/dp/B0778GWSLY/ref=mp_s_a_1_1_sspa?dchild=1&keywords=yong+heng+4500+psi+compressor&qid=1592448589&sprefix=ying+heng&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWFE2VUdXWlgxNjc0JmVuY3J5cHRlZElkPUEwNTU0NTQzMjA0UVlXWVlGRVY0RSZlbmNyeXB0ZWRBZElkPUExMDIyMzc0MVlUNDNRMkk5MVZRMSZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
Can you drop a link to that compressor ?
Nvm, found it !
www.amazon.com/dp/B07WVXHX17/ref=cm_sw_r_cp_api_glt_i_VK2QE9X3R1QR86DYF6CH?fbclid=IwAR1JQ7k3wHRX9HX5adJpLcCoCR131gtk5cSzNr5hEExrUfpLNAkkpvjbKFQ
Sorry I hadn’t checked my account in a while
I really need to get one lol / contest
Can i use that big air compressor in my garage
Yes you can, but you are going to have to buy a very big compressor, the picture only showed the fill station, there’s much more to it. But whatever floats your boat :)
Can I give ur channel an shout out ?
Sure! any support is greatly appreciated ❤️
@@theultimaterental alrighty done
Can I fill my mag with hpa? (Airsoft gun)
Depends which airsoft gun mags you are talking about, some only take CO2. I would check the manual of the gun on the manufacturer’s website to make sure.
Or just buy more hpa tanks 🤷♂️
Have you filled 13ci's? If so whats the time on those?
Alexander Jenkins 2.5 minutes from 0 psi - 1 minutes 47 seconds to 3000 from 500 - or 250 hand pumps with the hand pump. Very useful for those kind of tanks but I would suggest also buying a scuba tank so you don’t have to run the compressor every time for a small tank. You can fill the scuba with the compressor once as that will give you a ton of fills on your 13ci tank. Hope that helps!
So, can you use just a regular air compressor?
Any compressor that can generate high pressure air at least to a couple thousand psi will work
The Ultimate Rental thank you, this video was extremely helpful, thank you for making it.
Come on … NOTHING happens in Canada
Lol, I love this country 🇨🇦❤️
Would one the big industrial size air tanks work
hell ya if you got the space for it!
@@theultimaterental ya my dad has one in his shop
@@therealintrovert2632 wow lucky!!!
@@theultimaterental not really our house burned down 12 hours ago
@@therealintrovert2632 what?????
where’d you get the mask and helmet bro
It’s a Virtue Vio Ascend combined with a cut out military helmet 😀
The Ultimate Rental sweet looks so cool
Contest
11:15 putting the pump in water aren't you suppose to fill it with air not to mention the plugs aren't even 3 prong what the
No the pump and cord are waterproof, no air actually goes through the pump all it does is pump water into the hose so it can cool the engine while it’s running. Does that make sense?
@@theultimaterental ohhh i see yeah now that makes sense
Can i refill my hpa tank with a normal compressor? The one you use to fill your tires
No unfortunately those only go up to a couple hundred psi. you need something that goes to at least 3000psi. The options in the video are the only options sorry.Thanks so much for watching!
conteset
don’t use in home machine put carbon monoxide in air
Contest
Contest
Contest
Contest
Contest
Contest