I recently just built mine a few days ago, the 1999 impreza monte carlo TT02, haven't received the transmitter yet so I haven't ran it as of yet to test how fast it goes. So much fun to build... my upgrades were *TT02 68T high speed gear set *TT02 oil gear diff unit (500k front, 5k rear) *Yeah Racing full aluminum conversion kit which includes oil filled shocks & ball bearings (not a cheap kit lol) *HobbyWing EZrun Max10 G2 80amp esc W/ G3 3652SD 5400kv motor & OTA programmer *AGFRC 19kg LP servo w/ servo programmer * Radiolink RC8X transmitter
I'm part of an RC club and we do offroad racing... I'm working on getting together stuff to make a portable timing loop bridge and course for pop up parking lot racing... The class im worming on is a "sport touring class" , any tub chassis shaft drive car with an RTR OR kit included brushed motor, or a possible brushless option... any rubber tires on spoked wheels, 2s lipo, and 190 or 200mm bodies that represent real life sports cars ... but otherwise pretty open rules... Would be open to Tamiya cars, Kyosho Fazer, and a number of other cars, with some decent rtr options and lots of kits and bodies available... Then going to encourage people to get together and bring a class of offroad cars to burn up old tires, like 4 or 6 short course trucks, or 4wd buggies all show up the same race and finish off old tires...lol maybe eventually add other classes if people take up interest...
Building this same kit now, wanted to upgrade some parts as you did. I just installed tatt-020 fluid diffs with no issues. The universal joints are a different story. I was told by yeah racing to use the tc1 tatt-030 u-joints which seem a lil long and bind up rendering the suspension travel utterly useless. They also recommended I try tatt-015 as you did but use the tatt-056 cups. Did you do this or notice slop in the cups? I hesitate to do another trial and error any help from anyone appreciated.
Love this kit. Saw pt 2 first and watched this next. Great tips. Thanks for showing your mods. I did those too with ours. My only critique… and this really isn’t something you would do differently considering you are a vendor… but man… while I dig Tekin products… when each piece is more than the whole kit… lol. Well at least the motor is under $125. lol But well, this is a Tekin vid so I get it. Great job though. Really enjoyed your build and great job explaining what you were doing. Thank you for a great tutorial! 👍👍👍
How are you finding the 60mm shocks and with the combined spacers? I'm currently building the same car and thinking of getting the YR 55mm's but you have a point about more clearance for 60mm's. Are you happy with the 60mms? Does all that extra clearance not clash with the shell?
60mm is about as long as physically possible with the stock shock towers. The front arms won't really allow much more travel downward with my current setup and up travel is great, haven't noticed hitting the body anywhere.
Awesome video, great to see the classic Subaru! I am in the proces of converting my TT-02 Nissan Motul GT-R to a rally car right now. What do you think of the Tamiya Rally Block tyres? There are some great videos out there on this topic, but yours is very clear and very well put together. Nice to see the chassis cover set, seems to be a must have part. Keep up the great work and thanks.
The Rally Blocks are definitely hard, I think a softer and taller profile tire will help soak up the rough terrain better. But these definitely throw some roost!
This particular one does not, but there are receiver/radio systems that have stability control that will offer sort of an active braking setup along with a steering gyro. I don't think it's needed, really.
umm when you say WRC I think Lancia, Peugeot, and Audi I am thinking of Group B, but I am still not wrong... Subee def killed it after the death of group b
When I think of rally. I automatically think of the group b cars. Especially the sport quattro's.
I was about to say "oh you little one" when thinking about Subaru vs Group B cars, but i understand you its where you come from. Great video! :)
I LOVE Group B cars too! I'm just a glutton for blow head gaskets lolz
Just bought mine because of this video cant wait to gather all the upgrades and get started 😎
Definitely using different shocks next time, the off-road versions are the way to go!
I recently just built mine a few days ago, the 1999 impreza monte carlo TT02, haven't received the transmitter yet so I haven't ran it as of yet to test how fast it goes. So much fun to build... my upgrades were
*TT02 68T high speed gear set
*TT02 oil gear diff unit (500k front, 5k rear)
*Yeah Racing full aluminum conversion kit which includes oil filled shocks & ball bearings (not a cheap kit lol)
*HobbyWing EZrun Max10 G2 80amp esc W/ G3 3652SD 5400kv motor & OTA programmer
*AGFRC 19kg LP servo w/ servo programmer
* Radiolink RC8X transmitter
I'm part of an RC club and we do offroad racing... I'm working on getting together stuff to make a portable timing loop bridge and course for pop up parking lot racing...
The class im worming on is a "sport touring class" , any tub chassis shaft drive car with an RTR OR kit included brushed motor, or a possible brushless option... any rubber tires on spoked wheels, 2s lipo, and 190 or 200mm bodies that represent real life sports cars ... but otherwise pretty open rules...
Would be open to Tamiya cars, Kyosho Fazer, and a number of other cars, with some decent rtr options and lots of kits and bodies available...
Then going to encourage people to get together and bring a class of offroad cars to burn up old tires, like 4 or 6 short course trucks, or 4wd buggies all show up the same race and finish off old tires...lol maybe eventually add other classes if people take up interest...
Great simple kit, love this version of the tt02
It's a good one!
I bought this kit last year and still haven't finished it. lol Glad you made this video!!👍
Get it done!!! It's such a fun car.
very good big liked
Great video! What screwdriver were you using?
Thanks! It is a really old Skil iXO driver, still rocking after like 15 years!
hi what tint did u used? name and serie?
The Tamiya PS31 smoke.
Building this same kit now, wanted to upgrade some parts as you did. I just installed tatt-020 fluid diffs with no issues. The universal joints are a different story. I was told by yeah racing to use the tc1 tatt-030 u-joints which seem a lil long and bind up rendering the suspension travel utterly useless. They also recommended I try tatt-015 as you did but use the tatt-056 cups. Did you do this or notice slop in the cups? I hesitate to do another trial and error any help from anyone appreciated.
Really nice Subaru built. By the way what brand are those two trucks on the shelf. Thanks
They are custom 3D printed builds.
Hmmm, mine came with ball bearings, metal dog bones and cups and driveshaft. Also adjustable shocks.
Definitely not a base TT02 kit then, must be an SR?
Enjoyed the video 👍. What did you use to tint the windows with?
Tamiya Smoke!
Love this kit. Saw pt 2 first and watched this next. Great tips. Thanks for showing your mods. I did those too with ours. My only critique… and this really isn’t something you would do differently considering you are a vendor… but man… while I dig Tekin products… when each piece is more than the whole kit… lol. Well at least the motor is under $125. lol
But well, this is a Tekin vid so I get it. Great job though. Really enjoyed your build and great job explaining what you were doing. Thank you for a great tutorial! 👍👍👍
The kit usually is less than half of the whole project. I see cheap kits as an opportunity to spend more money on good running gear!
Very nice build, How are you liking the 60mm shocks
They needed softer springs for sure, going to try the off-road versions they sell.
Hi bro, where can i but that kit. There no stock in my place.
I got mine from Amain!
How are you finding the 60mm shocks and with the combined spacers?
I'm currently building the same car and thinking of getting the YR 55mm's but you have a point about more clearance for 60mm's.
Are you happy with the 60mms? Does all that extra clearance not clash with the shell?
60mm is about as long as physically possible with the stock shock towers. The front arms won't really allow much more travel downward with my current setup and up travel is great, haven't noticed hitting the body anywhere.
Awesome video, great to see the classic Subaru! I am in the proces of converting my TT-02 Nissan Motul GT-R to a rally car right now. What do you think of the Tamiya Rally Block tyres? There are some great videos out there on this topic, but yours is very clear and very well put together. Nice to see the chassis cover set, seems to be a must have part. Keep up the great work and thanks.
The Rally Blocks are definitely hard, I think a softer and taller profile tire will help soak up the rough terrain better. But these definitely throw some roost!
Terrific!
Does this model have an active braking system? I'm looking for my first RC car, but I want a very complete one.
This particular one does not, but there are receiver/radio systems that have stability control that will offer sort of an active braking setup along with a steering gyro. I don't think it's needed, really.
@@TekinRacing interesting, I think I will try this model then. Thanks for the answer
This car isn't ready to run, so I hope that's not what you are expecting.
Great video. What gearing did you end up with?
20T pinion seems pretty decent in SPEC mode, ended up 22T and running 15 degrees of Boost for extra roost!
I just built the Audi A2.. and I must admit I would like to race you! Lol
Sounds like fun!
I've found👍😅😁
Love Colin but I'm an evo guy haha poobaru
RIP EVO.
You pronounce AUDI totaly wrong ;).
Gah I knew it.
You spelled totally totaly wrong
umm when you say WRC I think Lancia, Peugeot, and Audi I am thinking of Group B, but I am still not wrong... Subee def killed it after the death of group b
What's with all the YR crap you're sticking on? Apart from the shocks, nothing they produce is of acceptable quality...
Because it's my car and to keep the cost somewhat low.