my dream skyline is destroyed - RB25 engine teardown
HTML-код
- Опубликовано: 10 авг 2022
- Down we go, my first time going deep into an Engine. Searching for a cause for what destroyed my Skyline's Engine, the RB25DET.
R33 Skyline Build Series Playlist ► bit.ly/3ci1ch2
Merch ► bennysurge.com/
Instagram ► / benny_surge
Blokes in video:
Kris ► / kris.ape_
Henry ► / its.henrydann
Scott ► / scottmitchellmedia
Chris ► / shockworks_suspension
Benny Surge Soundtrack ► bit.ly/bennysurgesoundtrack
Video edited by Surge 
Авто/Мото
Man this has to be one of the best car vlogs. Stripped down an entire RB in a 20 minute video and made it look seamless, no overwhelming information that non car guys wont understand. Really hit the nail on the head with this one mate, really looking forward to more of these :)
Agreed quality vlogs, we need more projects I can’t wait
Who watches engine strips when you're not a car guy
@@epicpranks3817 me
@@i9bonsai0.o7 same
@@Roo0ooD Me too! This legend makes stuff interesting to watch
Benny I gotta say I am a huge car guy and watching you go from rust content to car content is awesome. Keep it up bro!
Y35w🎉ree
I know nothing about cars but this was a compelling watch.
Unfortunately this is just the risk you take buying second hand engines. Didnt swing in your favour this time but let it be a learning experience for yourself and your viewers. Very well put together video mate. As a rust and car enthusiast i am really enjoying this change. Keep it up 👍
I used to drift an RB25 swapped s14 and got the exact oiling issue you are speaking off, at least you caught yours during tuning we blew the bottom end out on track. Either way keep smashing it mate, by the end of it the car will be a legend.
yep oil starved, there is a channel dedicated to stripped engines exactly like u did -- "idocars" where u can get an education on the effects of oil starvation. The engine had had a hard life, it didnt look well cared for. no signs of detonation in the chambers, the headgasket looked bad, to crack like that i rekon it overheated at some stage
daym that sucks man did you ever revive the car?
Such an underrated RUclipsr
seriously
@@SkippoSkippo seriously
^
dont touch the oil restrictors just get one of the rear head drains that goes into the welsh plug on the back of the head and shell be tip top after that
I'm more of a muscle head myself, but and engine is an engine. Sick vid Surge. Remember these 2 things when it comes to engines.
1 - Second hand is only as good as the day before it fucks up.
2 - If it's worth doing, it's worth overdoing !
Hey man, my guess is she's had a failure previously from heat, bearings were either not checked or re used. Good luck, love the car content.
As a previous owner of an R34 GTT, I’m loving this skyline content. But you have done really well mate with being able to go into detail about your process but also at the time keeping it quick and fresh. Keep it up legend 🤙🏻
To fix the rbs oiling problems you can go a few ways depending on budget and end goals you can put oil restrictors in the block to stop the oil from filling up the cylinder head another way to tackle that issue is to add a rear head drain which uses one of the welsh plugs and helps that problem another thing that helps a lot is a sump with extra oil capacity
Dry sumping the engine will fix all the oil problems with the rb but it is a costly endeavour
RB oil issue was exactly my gut feeling when I saw the previous video. Not sure if I should be happy that I was right, or sad for your loss. Either way looking forward to the future updates.
Man im not a huge car guy but you just pulled me in for 20 whole mins and im hooked. these vlogs are fricken awesome, keep up the amazing work brother
mate it’s 5am but love the shit keep it going
I'm so glad you started this channel! Been watching every single one of your videos for years and have always had an interest in your cars. (Especially this r33) . Keep up the amazing work! This is some absolutely fire content!
love the fucking ending! i think i haven't been that excited by a cliffhanger before
Please keep them coming, I thoroughly enjoy the narration, the vibes, the visuals, etc.. it's been a while since I have enjoyed vlog style videos !
i typically don’t put my 100% attention on most yt vids but you’re doing a hella good job
Honestly some of the best car content on RUclips RN keep the good stuff up bloke.
When you hit rock bottom on a 25 so decide to go all in and take on the final boss of oiling issues hahaha
Mad videos mate, only just came across them 🤘🏼
The quality of your videos are so freakin' dope mate. All I can say is, I cannot wait for the next video!
awesome video, your amazing story telling and a teardown where i get to learn aswell, killer combo
love all the content you put out and seeing you get more into cars is dope :)
bennys back! these videos are pretty sick and that teaser at the end got me anticipated for whats next
This is such a good time to watch keep up the car vlogs!
I am so loving this series man keep them coming
Loving this content, great mix of elements. Will be watching👍
And love the content benny so much has changed since the rust video days good too see all the cars and u building up ur dream fleet keep grinding ya legend
Amazing content Surge, my first car was a 1990 gts-t type m skyline I bought in 98 so I’ll always have a soft spot for these cars, currently in a 20 quantum grey A4 Audi but I still see myself back in an old school skyline one of these days, and although you’ve had problems with the 25 I couldn’t help but laugh at the 26 cover plate at the end. Can’t wait to see what you do mate.
I'm not a car guy and know very little about cars but for some reason I enjoy these videos. I watched another channel rebuild an old pickup truck from scratch and that was fun to watch too.
Love the style of video. Very interesting to watch. I see you being very successful. The added sounds, and explanations. I did hope to see a glance of the pistons, but after watching more, it didn't really matter. As a mechanic, there wasn't anything triggering, except for the mess haha.
Sadly he doesn't know what he's doing so will teach people the wrong thing.
Oi Benny boy! I rarely ever comment on RUclips vids so let me start off by saying I adore your content. Either rust or the vlogs, shit is top notch. Keep up the great work and ol girl will be up and runnin soon and I can’t wait to see her in action! Cheers brotha!
Man dude that sucks so bad! Awesome video tho my guy! Great editing, music and story! I cant wait to see more videos!
This is some gourmet content I'm loving it and I'm not that big on rbs, could tell pretty much straight away the state of that cylinder head was a red flag and it's actually amazing it survived the 280kw tune the first time.
Big dog forged bottom end and you'll be hissing for years to come.
Hope things go better with new engine buddy, great vid keep it up.
that ending... i will now be stuck to the edge of my seat waiting for the next vid
Good shit brother, can't wait to watch the next update.
Go on benny mate, 30k subs and growing
I hope the algorithm likes you 🤞
“I got something else up my sleeve” perhaps the slickest thing I’ve heard on RUclips
Lets go. Cant wait for the 26 to go in. Best engine. Dont leave any stone unturned for this one
I absolutely love the rust soundtrack in the background also the code lock sound at 8.14
Honestly I know your a gamer and all. But no word of a lie best car/ vlog channel I have ever watched!
Watching this Ben, Makes me itchy to finish my R32, Great content man!
Barra next?
But yeah, a second hand engine refreshed/rebuilt by a reputable shop is the other option...
Awesome vid man, just found you recently. Keep it up.
Benny, please never stop making these
Awesome video, awesome content, keep it up bruz itll all be worth it when your hittin full noise when shes got a new heart 👌
loving this new channel mate!
ending is legendary got me pumped!
Half way into the video I'm thinking you should get an RB26.Glad you got one.Awesome channel.
love the ending ! absolutely fascinating
Great Video Surge, I'd say hasn't had regular oil changes with that discolouration. Always sucks finding shiny stuff in your oil but means while it's open put some forged internals and cams Yew 👍 Good work looks like ya got a decent crew too. Always helps to have mates!
Great video. Hanging for the next one.
Never clicked on a video faster than this one. Hate to say it, better than a rust video.
Most badass RB26 reveal I've ever seen.
We need more frequent uploads mate, good shit
I normally dont comment but I must say I'm really enjoying your vlogs Benny-boy! Keep them coming :)
100% not the tuners fault, they are constantly checking fuel ratios/ boost oil etc to make sure it’s not going too far on the dyno. I think the engine starting spewing out the oil wouldn’t of helped but it’s probably down to just being sat for soo long before you bought it. I built a car in 2016 and didn’t use it often enough and took it to the dyno last week and it blew the bottom end, even though I did an oil flush/ engine service etc it just does it no good to be unused. I’ll put a video out on that in the next few weeks. Did a dyno day on my Mk1 back in April and went through what needs to be done on a fresh engine build, like wearing in the piston rings on the dyno etc. maybe worth a watch.
Great vid Surge. Keep the. Coming 👍
Good luck with it man. I had to go through the same shit with my Skyline.
crank collar mod and cylinder head oil drain kit with a oil sump girdle and your pretty sweet. further than that you could upgrade the oil pump gears an that but thinking about it you probably want to keep more oil in the pan. cylinder number 6 is obviously know for heat soaking as well so thats something probably influencing #6 to go like that. motor was probably flexed on or ran lean for too long an oil drain issue seals the deal completely. heat will make oil coke up everywhere as well so regular oil changes are a must if your going through constant heat cycles an limiter bashing heaps
Rb oiling issues are pretty easily fixed, oil restrictors in the top of the block done by a machine shop or Franklin head drain is the best option for them. Tap the rear welch plug in the head out then tap two M6 holes in the back of the head (use machine shop) then it screws right into the back of the head, and you can run it back to the sump, works on rb26s just needs another fitting, the cheapest way to conquer the issue. Loving the build keep going it’s worth it in the end.
Editing on this is awesome 👌
So keen to see what happens next!
Been waiting for this for so long
hey mate awesome video to watch, also I personally suggest adding on 2 extra drainage hoses about dash 10 sized. from the lower of the 2 cam shaft covers/tappit covers, down to the sump. also baffle the sump
This channel is so underrated rn
Yeah, I had a #6 ringland blown in my Rb25det before I got it. I had to take it all apart and let the machine shop check everything. I will say the RB is expensive to rebuild if you are a regular guy like me and have no connections. I am excited to see this build!!
Just found your channel! Love the style of videos
keep these vids coming benny love em
I just watched a engine get torn down I don’t know why but I kinda liked it 😂👍 keep up the great videos benny boi
Funk yes bro this vid was amazing you went off with that 😂😂 good editing I hope to see more content with this build
I know this is a year down the track (i have not seen subsequent vids yet, catching up!!) and having quite extensive experience rebuilding engines, those 'scores' on the crank mains are not that bad. And sure, we assemble them with the bearings in their slots so it's not (not usual, even if spun) uncommon to have them not remove the same way. They get 'stuck' because they lose some thickness having been spun. I have seen many spun bearings with no signs whatsoever of there having ever been a journal .. imagine it? They must have been in a bad way for some time yet people just keep pushing them until the eventual heavy grind one day and it seizes. Almost always it's retrievable.
We used a Melbourne shop for our cam reprofiling and new cam caps, kits etc. But we, no matter where we were in Australia, used a guy in Lawson in the Blue Mountains - Mountain Engines! HE IS THE BEST OF THE BEST, for crank work, crank profiling and re-profiling and block work. Simply, second to none. No wonder top-fuellers and funny car builders use him. I hope he is still around. Second to NONE. And almost every engine is redeemable barring a rod through the side!
it sucks having to start again man, feel for you. thankfully you have some good mates to help you out
I was about to say buy an RB26 instead, and my man showed the RB26 at the end . Nice one mate, hope this one is gonna better, than the old one. :D
Nice vid man, you got yourself a new sub
Big up the RB 26, keep it coming Big Boy
Amazing content mate you deserve more subs bro
Noicee man love seeing the dedication to it
Real bummer man. Had a bearing go on my Neo motor and just finished the rebuild. Thats the route Id go rather than using a running second hand motor.
But keen to see where you go with this.
I don’t even watch you other channel but these vids go crazy
Onya Benny, keep them coming.
Great content man, I know nothing about cars yet still want to know more.
that hotline miami soundtrack at 2 mins got me vibing hard
ahh man so exciting to see the 26 going in, personally im jealous i cant have on in mine.
However, id suggest looking over at the guys at Motive Video, huge knowledge bomb for RBs. It'll give you a good thought of where you want your car to be and what to look for.
Not every man off the street could hit up andrew from motive for some RB advice but benny is not some random so i have to agree 100%. plus andrew(motive video )probably knows chris from shockworks (the guy who wandered in for cheeky peek) so benny might have an "in".
thse vids are awesome, cant wait for more
Yupp I would second your idea that the motor was just f'd from the beginning. Cant wait to see whats next!!
Seeing how brown the engine was on the inside, it just wasn't maintained properly to begin with. Should be nice and silver-y inside. Just like my 187k Rb25. Hopefully you'll get back soon!
I agree I have had many I6 engines toyota1jz 2jz, BMW n54, Ford Barra. Most looked clean inside and had no problems except the N54 and it spin a rod bearing. I found black carbon in every oil passage and every oil filter no matter the duration I swapped it out. IMO the black carbon junk can clog oil passages and contribute to exasperated bearing wear.
@@Nathan-gj8ch agrees
babe wake up new surge car vlogs
That engine has a lot of heat fatigue in it and a fair amount of sludge build-up I had this happen to my engine which resulted in me having to do are engine rebuild Nissan told me that it was due to the previous owner not changing the engine oil when it was meant to be changed which resulted in excessive heat because the oil wasn't doing what it was mean to be doing due to lack of oil changes as for the sludge build-up that is due to mixing different brand oils once you find are brand oil that works for your car stick with it do not change, I ended doing the rebuild my self with are few mates we all had to learn as we went because we all had very little experience with rebuilding engines but we took our time and got it done now she is as good as gold I hope you get this beast back on the road brother best of luck 👍
My best advice is you have to do everything by the book and spec. Measure everything and go out the reading. Bearing clearance. Crank size and bore size. And best oil suite your clearance.
Bro, I am going through exactly the same thing with my R33. When does next video come up? Keep going strong!
/greetings from Sweden
another great video, waiting for the update
I’m a bit late to the party but dude sick videos you do it well.
I don't know, to me that tuner was an absolute champ, knew what he was talking about and dumbed it down pretty well I think. I think the oiling issue with the is probably what knocked that RB, especially since because you were at a tuner and the rb25 has baffling in the oil pan there is no way oil slosh would be the problem. I also think that the engine wasn't making enough power to shatter the oil pump and shear the snout on the crank. Fantastic videos keep it up
great vid mate
Bro you need to get yourself to summernats!!!!!! The biggest burnout comp ever
now that was a good fucking outro, keep it going you absolute legend
Just had you Shed vid pop up and watched the shit out of it and now Im here!
How have i just found you now?! Shits unreal!
I was excited for a barra sawp at the end... but UPAA THE RB26