I just did my whole front suspension but the stabilizer link has been rubbing on something and it’s making a slight clonk noise when i turn...i wonder if its the stabilizer sway bar or bushings ?
I ended up having trouble with the stabilizer link removal on the left side strut and didn't have the parts on hand if I decided to just cut it off. I took it to Midas and they spent almost 4 hours replacing that strut and stabilizer link and using my strut and mount plus they did a 4 wheel alignment. That cost me another $198, but the front end feels great and runs true.
I'm needing to replace the the same, do you recommend oem or aftermarket? I found 2 lower control arms with bushings and ball joints, 2 sway bar links, 2 inner and 2 outer tie rods for $100 with 10yr warranty. What do you think?
I just did my whole front suspension but the stabilizer link has been rubbing on something and it’s making a slight clonk noise when i turn...i wonder if its the stabilizer sway bar or bushings ?
I have a 2008 compass. I just replaced the lower control arm...stabilizer bar...wheel bearing...and axel. Good vid
tayemims thanks, glad to help!
I ended up having trouble with the stabilizer link removal on the left side strut and didn't have the parts on hand if I decided to just cut it off. I took it to Midas and they spent almost 4 hours replacing that strut and stabilizer link and using my strut and mount plus they did a 4 wheel alignment. That cost me another $198, but the front end feels great and runs true.
Hi. I've got an 07 Compass. The factory service manual says to use special tool 9894 and 9362 for the strut nut. Are they necessary?
+Ezra Moro I didn't use either of those.
I'm needing to replace the the same, do you recommend oem or aftermarket?
I found 2 lower control arms with bushings and ball joints, 2 sway bar links, 2 inner and 2 outer tie rods for $100 with 10yr warranty.
What do you think?
I bought the best stuff they had at rockauto.com
and.............the rear ones?
+c8kwalk I haven't done the rear.