For my 2017 Silverado 6.2L, I've got a muffler delete, 3inch pipe...to a y pipe...into 2.5inch dual pipes, still got my all my cats. I want it be a little louder. I might replace the third with a high flow cat. Maybe? Yes?
What’s the links to the first one? I’m new to this so I really have no clue what I’m looking for or what it’s suppose to look like. A link to the parts would be helpful. Thank you
@@dontrom1588 It was probably about 70 per cent of the decibels. It was a vast improvement over stock. For about $40 you can switch it out for a cherry bomb using the extension piece that comes with the RC kit. or $80 for a flow master
@@BackFortyTV you must not know how welding works, welding is easy but doing it perfectly in a straight line takes extreme skill and most dudes who work at muffler shops do sloppy welds because it’s extremely time consuming to do it perfectly and would cost alot more to be done because of the time consuming labor to weld it almost perfectly
@@Peculiarsafe83 I weld everything myself, looks pretty good. Real simple to unbolt everything and wore weld it up. Not talking down at all, but if you’re going to run a shop, do it right. Weld like it’s yours and don’t drive people’s vehicles like a maniac to show off for RUclips. Simply put.
It's a huge difference in my experiences. My '07 is dualed-out with 2.5" and y-pipe, and finished up with 6" slash cut tips. I got rid of the resonator when we cut out all the factory pipe. It sounds perfect. I could upload and post a video on my RUclips channel if you want me to.. It would be my first upload 😆
Not that I've done it myself 😜 but if you remove that secondary cat after the y and just put a normal piece of pipe in its place you get no codes and sounds best no need for a aftermarket high flow cat.
@@foxbodyguyeightyeight3672 Lol actually I went a head and did that... I deleted the 3rd cat, installed a super 10 and dumped it. I love it, neighbors not so much🤷🏻♂️
Deleting the third cat won’t go against any codes ? I wanna do my gmc , currently running a regular aftermarket dual exhaust but I want it to be louder , suggestions ?
Ok.... I've watched vigorously and love you guys wisdom. On my 02 avalanche 5.3.... the muffler delete is a bit loud in the morning for the neighbors. I want a LOW tone, louder on acceleration and no cackling. No problem deleting the 3rd cat. Cat to tip suggestions? Thanks!
Do you know if they make a bolt on kit for a Flowmaster super 10 on a 2005 crew cab short bed Silverado 5.3? I can only find one for extended cab. I'm 2.5 hours from you guys near Knoxville.
Hey guys, on that 2021 Silverado Trail Boss with the Borla Touring Exhaust system, is there anything on the market that would sound very similar that i could put on my 2006 GMC Sierra 4.8L? I love the deep and tight sounding exhaust.
After reading about 10 or 15 comments I have the same question how much does one of these systems cost you need to say this 1 costs a 150 or this One cost $500 Labor I am curious
I want to hear the idle and I like the throaty sound as you call it but I don’t like the clap when it gets revved up so I’m trying to figure out a good setup
i just got my 2018 silverado an i love it an i want it to have a deeper growl to it but i dont like the clapped out sound so any suggestions ? an im new to this stuff kinda
Bend the end of your tail pipe(s) 30-60 degrees and put anything that doesn’t hang down too far. Like the first video. 3 1/2” to 4” will get the job done on dual tips. Probably a 4” or 5” on a single. That straight under the rear bumper stuff looks corny to me personally unless it has cutout outlets in the bumper like the third truck. So do oversized tips though. That’s just my opinion though lol. Everybody has their own preference. Just do what you like 👍🏻.
Hey I made a video of my setup on my Tahoe if anyone is looking for an exhaust setup feel free to have a listen. Headphones are recommended and for mods look in vid description.👍
1 quality made Borla system vs 4 Hillbilly exhaust setups. Ugly, cheap pipes and nasty 4 and 5 inch tips. What a shit hole. Saddest thing is he a muffler shop, yet he's never heard of Borla 🤦♂️ Good riddance
@@elcompatavo9365 that was a factory option borla. I had a adjustable borla on my trans am with no block off plate and it was loud. Even though that was basically straight pipe most of borlas mufflers are straight through design which makes em on the louder side. But they are pricy.
What’s the links to the first one? I’m new to this so I really have no clue what I’m looking for or what it’s suppose to look like. A link to the parts would be helpful. Thank you
That flowmaster single exhaust and tip sounds the best to me
A deep rumble
Meh
That pop after the shift sounds so damn beautiful
The Borla Atak exhaust system is the best sounding exhaust system out there for a newer GMC/Chevy
@ Cale Williams negatory Bub !!! Corsa is the Best sounding exhaust ever !
I have the borla atak crate muffler on my 2014 silverado and I absolutely love it
100%
That outlaw is just AMAZING. I know what im puttin on mine
i just bought a 2018 escalade, i love the way the Corsa sounds on the video you did on the escalade, no drone and nice engine sound
Outlaw is the one I'm liking. That really sounds good for a single. Curious what a dual would sound like.
Sounds like a lion's roar 🔥
For my 2017 Silverado 6.2L, I've got a muffler delete, 3inch pipe...to a y pipe...into 2.5inch dual pipes, still got my all my cats. I want it be a little louder. I might replace the third with a high flow cat. Maybe? Yes?
Yes or you could remove it completely. I have a 2015 Silverado removing it didn’t make my engine light come on and made it louder a
Remove it completely. Did that with my 18 5.3.
Remove cats completely not sure if you'll need a tune.
@@charliehorse11 did you have to get it tuned?
What’s the links to the first one? I’m new to this so I really have no clue what I’m looking for or what it’s suppose to look like. A link to the parts would be helpful. Thank you
go to a shop its full custom
@EricTuravaniVlogs how much did it run you ?
I wish you were based in Massachusetts I would totally hire you
Oh hi!! I'm from Mass also
I have a 21 Silverado 5.3. Took a Rough Country cat back, replaced the RC muffler with a Flowmaster Super 10.
How was the rough country exhaust before you replaced the RC muffler?
@@dontrom1588 It was probably about 70 per cent of the decibels. It was a vast improvement over stock. For about $40 you can switch it out for a cherry bomb using the extension piece that comes with the RC kit. or $80 for a flow master
I’m going with the flow master outlaw on my 2010 Avalanche because it sounds the best in my opinion
Wish you guys would show a Borla ATAK install! That exhaust would SPIKE your decibel meter!! It's insane..
They have before look for that video on there chanel I saw the video there not that loud
I might just go with the first option.
Do better welding...please.
@@BackFortyTV you must not know how welding works, welding is easy but doing it perfectly in a straight line takes extreme skill and most dudes who work at muffler shops do sloppy welds because it’s extremely time consuming to do it perfectly and would cost alot more to be done because of the time consuming labor to weld it almost perfectly
@@Peculiarsafe83 I weld everything myself, looks pretty good. Real simple to unbolt everything and wore weld it up. Not talking down at all, but if you’re going to run a shop, do it right. Weld like it’s yours and don’t drive people’s vehicles like a maniac to show off for RUclips. Simply put.
@@BackFortyTV the owners drive off
I like the way the avalanche sounds I want my truck to sound like that
What would sound better the black widow neighbor haters or Magnaflow exhaust
How much is the set up on the 1st red Silverado?
Mine on a 2010 was $250
Man I like how the firt one sound whats the materials you use for it to sound like that
Yes I love the first one.
It’d be really nice to hear how they sound before you do the work for a comparison
They sound exactly how you think they would sound. Like a Prius
Stock exhaust on a new truck is literally so silent that there is no point in comparison lol
@@dixiedixon0171 exactly. Not missing much
@@blakeoconnor1047 😂
@@blakeoconnor1047 I was talking about in general on all videos to be fair
loving the sounds of those exhaust and I'm def going to upgrade but those welds???? Yuck!
But if you cut off the flap do any lights come on after some time and would it still pass smog?
Do you guys have any videos of a flowmaster 50 series with resonator delete? 2019 Chevy Silverado Trailboss Custom. Thank you!
Love that Lincoln!!!! Nice work!!!!
What all can you do to the exhaust without voiding a warranty?
That can void the warranty ? I thought it was only big stuff like tunning and stuff
How big of a difference in sound is there if you take the resonator out that’s after the third cat
It's a huge difference in my experiences. My '07 is dualed-out with 2.5" and y-pipe, and finished up with 6" slash cut tips. I got rid of the resonator when we cut out all the factory pipe. It sounds perfect. I could upload and post a video on my RUclips channel if you want me to.. It would be my first upload 😆
@@johnwayne3904 I'm interested
@@WORKanU I'll get something going soon for you 👍
@@johnwayne3904 I appreciate sir
@@WORKanU No problem buddy. I'll post a link here or let you know someway more respectful of the Exhaust Addicts channel.
Know with the black widow's is it a must u leave the 3rd cat? Can it b removed
Would like to have heard the The cut out version of the Muffler loud
I need that high flow cat, which one is it? TIA!
Not that I've done it myself 😜 but if you remove that secondary cat after the y and just put a normal piece of pipe in its place you get no codes and sounds best no need for a aftermarket high flow cat.
@@foxbodyguyeightyeight3672 Lol actually I went a head and did that... I deleted the 3rd cat, installed a super 10 and dumped it. I love it, neighbors not so much🤷🏻♂️
Deleting the third cat won’t go against any codes ? I wanna do my gmc , currently running a regular aftermarket dual exhaust but I want it to be louder , suggestions ?
@@yoseeev8306 No the O2 sensors are before the 3rd cat. Definitely makes it deeper in sound when your on it, as well as at idle.
@@adrianjr3629 good to hear , I think I’m gonna delete the muffler and resonators then might delete the third cat if I want it louder
Corsa makes the best custom exhaust Hands Down !
You ever done a chevy 2018 silverado with super 10 and 5" tips
For the avalange if i wanted to do this on my silverado do i need to cut my third converter out for it to sound the same
Great vid!
Removin the third cat will cause check engine light to go off ???Or no
Ok.... I've watched vigorously and love you guys wisdom. On my 02 avalanche 5.3.... the muffler delete is a bit loud in the morning for the neighbors. I want a LOW tone, louder on acceleration and no cackling. No problem deleting the 3rd cat. Cat to tip suggestions? Thanks!
I would recommend Jones Exhaust/North Eastern in the place of your stock muffler. It would give you the tone you are looking for.
@@exhaustaddicts Is that a location or a product? Not finding it.
@@kurtistillery82 product
@@exhaustaddicts ... As usual.... Killer reply time and expertise!!!
Their website is horrible
Do you know if they make a bolt on kit for a Flowmaster super 10 on a 2005 crew cab short bed Silverado 5.3? I can only find one for extended cab. I'm 2.5 hours from you guys near Knoxville.
Is there an exhaust that sounds good but not to loud when driving! My mud tires are loud enough as it i!!
Super 40
Or super 44
@@koalwinscher6950 thanks I was waiting on an answer from someone so I could get one installed!! Think I might go with the super 40!!
@@jerryl5895 yeah they sound great.
@@jerryl5895 your welcome
does cutting the flap off effect the active fuel management in the GM trucks?
No but you need to turn that off anyway with a range AFM delete if you want your exhaust to sound good
@@rocker6883 how do you turn it off
Can you tell or give a link to the first truck high flow cat thanks
Where can i get everything like in the first video for my truck 2014 chevrolet silverado high country 5.3L 4x4
Check the the links in the description
16:50 what about the cutout !!! 📢
Red sounds great
What are all the components for the first Chevy Silverado I love it? Any links I could get?
you ever find all of them? Id like to have every link so I can do this exact set up on my 5.3 2014 denali
Have you done na video on dumped exhuast?
Who did you say makes the 6 in rolled tip on the 07 avalanche exhaust?
Hey guys, on that 2021 Silverado Trail Boss with the Borla Touring Exhaust system, is there anything on the market that would sound very similar that i could put on my 2006 GMC Sierra 4.8L? I love the deep and tight sounding exhaust.
On mine I got a magna flow exhaust from my buddy he had it on his 07 Silverado and it had a 4.8l too honestly sounded awesome on it
The borla sounds like a stock truck
I have several videos on my channel showing off my true duals on my 2016 5.3L. Different videos with different size exhaust tip sizes.
Borla all the way!!!
I have a 2011 gmc serria 1500 it has a 4.8 in it and I want to get duel exhaust on it
On that Avalanche, did you do a 3rd cat delete? Looked like some kind of flange before the Flex pipe....Also no link to that 6" tip?
I don’t remember but some didn’t come with the 3rd cat on some years.
@@benjamincruz514don’t quote me but i believe on that body style the 07 and 08 models did not have the 3rd cat, my 08 Silverado didn’t have it
How much did y’all do the outlaw love the sound
link to the high flow cat? i want to do that to mine!
After reading about 10 or 15 comments I have the same question how much does one of these systems cost you need to say this 1 costs a 150 or this One cost $500 Labor I am curious
Call us at 615-612-6244
What all did you put in the first one
Need to do a spinteck 9000s on the 5.3
How much do the first pipes for the red chevy silervado
Where did you get the 5” tips on the first red truck?
what kind of exaust was on the red truck?
How much would it cost to do the y pipe in the first Chevy
With them probably 300-400
Way install the electronic cut out ?
After removing the “flap” does it throw a code ? I’m buying a 2021 Chevy 1500 Silverado with the 5.3 , will it have that flap ? Cheers
It doesn’t
The flap also eventually wears in it and starts making squeaky noise which is super annoying
On that 2021 Silverado, for how much money that truck cost you would think they would install a matching spare tire and rim 😂
I want to hear the idle and I like the throaty sound as you call it but I don’t like the clap when it gets revved up so I’m trying to figure out a good setup
Samesies
I had a magnaflow and valves left in. Nice a quiet when I want it, loud when I stand on it.
I have 2011 Chevy Silverado 5.3 what would be the best of the best mufflers can you plz let me know thanks
Fuck a muffler, true dual that shit With straight pipes, you’ll thank me later
what is the set up on the red chevy?
Where in Tennessee are you guys located I’d like to get you guys to put exhaust on my 2016 Silverado I live in West Tennessee
3560 Dickerson rd Nashville TN 37207
i just got my 2018 silverado an i love it an i want it to have a deeper growl to it but i dont like the clapped out sound so any suggestions ? an im new to this stuff kinda
If you don't want it to sound clapped out don't straight pipe it
@@Daimxn thanks i was looking at magna or borla but idk
@@ilxgacyi5160 borla atak is a good one to get a loud clean sound
Why do all these newer vehicles run at 210 degrees? My 97 Silverado runs at like 160😅
The third cat, why can't they disappear?
Left tip on trail boss sticking bout 1/4 inch more than one on right
Where are located....Clarksville or Nashville?
Where are you guys located??
Where u guys located
Any recommendations on an exhaust tip? I have an 08 Silverado 5.3L with a flow master Super 10
Bend the end of your tail pipe(s) 30-60 degrees and put anything that doesn’t hang down too far. Like the first video. 3 1/2” to 4” will get the job done on dual tips. Probably a 4” or 5” on a single. That straight under the rear bumper stuff looks corny to me personally unless it has cutout outlets in the bumper like the third truck. So do oversized tips though. That’s just my opinion though lol. Everybody has their own preference. Just do what you like 👍🏻.
I'm curious what each of these set back in cost?
It depends on what state you are in I'm n CA
here in CT. I know a guy that will do those for 250$ all day.
Where are you all located in Nashville
3560 Dickerson Pike Nashville, TN 37072
@@exhaustaddicts cool, I gotta come check y'all out...
Only problem is when it drops down to 4 cylinder mode. On any after market exhaust.
get a tuner to delete that, or buy the software for it to do it yourself (efi live i think) but it'll be expensive
Great advice, help them get their warranty blocked
@@Tgilbert03 they make a plug in one
@Ryan T I wonder if it voids the warranty tho? The Range ones specifically
@@streetconstruction541 the range disabler does not void warranty.
Decibel meter ? When you speak it spikes up over 100dB.....interesting. Lol
9:30 sounds pretty mean
What is your favorite exhaust
Corsa !!!!!
Where are y’all located??
Nashville,TN
@@exhaustaddicts any estimates on how long a setup like #5 would take (high flow in place of that 3rd cat ?)
Wats your location state?
Nashville,TN
Hey I made a video of my setup on my Tahoe if anyone is looking for an exhaust setup feel free to have a listen. Headphones are recommended and for mods look in vid description.👍
Where are yall located I'm in tn
2021 Chevy z? Zombies zombies?
14:10 💖💖😎🇲🇽🇲🇽🇲🇽🇲🇽
First one sucked, mad drone
its not really a dual
I have black widow neighbor haters and they're loud as f
jesus need to hire a new welder
1 quality made Borla system vs 4 Hillbilly exhaust setups. Ugly, cheap pipes and nasty 4 and 5 inch tips. What a shit hole. Saddest thing is he a muffler shop, yet he's never heard of Borla 🤦♂️ Good riddance
Nawww borla is to quiet, straight pipes all day
@@elcompatavo9365 that was a factory option borla. I had a adjustable borla on my trans am with no block off plate and it was loud. Even though that was basically straight pipe most of borlas mufflers are straight through design which makes em on the louder side. But they are pricy.
Not everybody wants to spend $700+ for a exhaust. You just sound really dumb.
@@warmaker4 and you sound really broke
@@neilwattoo better to be broke than dumb. 🤣
What’s the links to the first one? I’m new to this so I really have no clue what I’m looking for or what it’s suppose to look like. A link to the parts would be helpful. Thank you