Dryer Heating Element Replacement - Kenmore HE4
HTML-код
- Опубликовано: 21 окт 2024
- Kenmore Dryer Heating element stopped working. $20 repair in 30 minutes. This is an HE4 model but many electric dryers have a similar component. It was definitely worth fixing, but we eventually bought a new dryer which has safety features, such as detecting when the exhaust air flow is partially clogged or restricted (a common cause of house fires).
#appliancerepair #dryernotheating #laundry
I can't believe it....a nice simple straight to the point video. Well done Sir!!
Worked just as you described. Only issue was that the heating element did not want to come out or the new go in. That took more time than the rest combined. Excellent video
Excellent video. My wife actually wanted to get rid of the dryer when all it needed was a $20 part.
My wife wanted to do the same until I fixed it! Thanks for watching.
Thank you for taking the time to share 🙏🏼 This was exactly what I needed to fix my dryer. You made it possible for this Grammy to do it herself.
Glad I could help and thanks for watching my channel.
Thank you for being direct and to the point. I've seen 2 other videos that were way too long .your video is all I needed, thanks
You are welcome. Thanks for watching!
Thank you! I was able to easily remove my broken heating element after watching your video. Waiting for replacement part to get here tomorrow.
Glad it helped! Thanks for watching my channel.
Thanks Brah, 15 min fix, dryer is working again and the universe is back in alignment!! :)
You are welcome. Thanks for watching.
Cheers mate, just used this video to fix my dryer, save me hundreds!
Awesome. Glad it helped.
Exactly what I needed, thank you sir!
You're welcome!
Thanks
Thanks! Needed this to replace our heating element. Last time we replaced it was May, 2019. Looks like we may need to figure what's causing it to burn out so soon.
How often is it burning out? Ours lasted about 16 years. It should only burn out about once in it's life span.
Simple and to the point! Thank you!
You're welcome.
Hey great advice. Replacement went perfect.
Glad to hear it.
Great video, I haven’t been able to get the actual element out, it’s really stuck in there. Any tips on getting it loosed other than just using a vise-grip?
If you have removed all the screws then a good quick tug will do. Only friction should be holding it in.
@@works4me thanks for the quick reply! The little piece that holds the connections/leads on the front left, it was also seeming to be very stuck. I kind of was able to move it around a bit. In the video you just say to “pull it forward” or “pull it out” but then the video cuts and I’m not sure if I missed a step there
Sometimes you need pliers to get the electrical connectors loose. There should only be one tension tab on the opposite side (right) of the connectors. Near the end of the video you can see the element out and see the tension tab.
What are the part numbers for doing this job?
If its the same dryer then search for this on Amazon.
[LIFETIME WARRANTY] Ultra Durable 3387747 Dryer Heating Element Replacement Part by BlueStars
Perfect timing, thanks.
You are welcome. Thanks for watching.
thank you so much for the share
You are welcome. Thanks for watching my videos.
Where did you order the replacement part from?
Amazon had them in stock. Got it the next day.
Can you please tell me what’s the part number you bought please
Try searching this on Amazon.
Ultra Durable 3387747 Dryer Heating Element Replacement Part by BlueStars
@@works4me thank you so much