I used to visit FN’s factory when they were still in Fredericksburg Virginia which was 30 miles away from my house , been impressed with the quality and reliability. Very well made and handsome but too pricey .
My FN 509 was optic ready. I upgraded the trigger to Apex tactical and upgraded the barrel to a threaded barrel and I upgraded the striker which was Apex tactical also. Of all the guns I have this is my favorite.
Well, the interior design looks exactly the same as the older FNS9 I had. The gun functioned perfectly and lockup was was very nice and tight. The reason I don’t have it anymore was that I couldn’t effectively reach the trigger. It was designed for Graham, not me, so it had to go. It wasn’t until the military trials in the mid 10’s someone decided that smaller hands (womxn?) were important, too. The only new pistol from that era that continued to give me any trouble was the P10c, which shouldn’t have surprised me since I had trouble with the P07, too. I’m sure it will feed and shoot anything just fine. Since I was pulling the trigger a little from the side I could not make it very accurate but I’m sure that, in reality, it shot fine. Let’s see how this one does!
after buying an arex zero1s & grand power p1, i have come to really appreciate fully ambidextrious guns. i have got used to dropping the mag on the right side of the gun with my middle finger. when i switch to carry a non ambi gun, i struggle dropping the mag.
Read the manual guys. Do not dry fire these or the fns models. The firing pin will break, ask me how I know. I replace both firing pins in my fns9 and 509 with apex firing pins and use a dummy rd to practice.
My FNS9 has a documented 12,837 rounds through it along with enough dry firing time that even a Glock (which I own a few of) is thinking of taking a "break" and has NEVER even hickuped out of line let alone break anything, and my 509 tactical is catching up and no issues what so ever,,,,like anything else it seems guys will repete parrot the one or 2 bad over and over but fail to remember the multiple thousands of perfect ones that offset it,,,but that more than ever seems to be the way of the internet,,,,and no it's been years since I've picked up and read the manual for either of mine since they were new out of box, and those boxes packed away in deep storage so to speak, but I may just dig them out to see what the manufacturers opinion is LOL.
@@MrSmith-zy2bp look at it this way,,,, firing pins are dirt cheap and plenty available even the "improved heavy duty" ones from Apex tactical so why not just get one or 2 as a spare and keep around just in case(Glocks and Sig's break too don't fool yourself) ( however I did just that and as of yet not needed), they also take less than 5 minutes to change because it is rather simple to change, beauty of the FN is there is pretty much 90% parts interchange and compatibility amongst all model new and old pretty much as good as Glock but in a dare I say it much better out of box gun than you get when buying a Glock,,,but to each their own as they say.
My first thought when Graham pulled the gun out of the box was: "Damn that looks vanilla..." 😁 On the other hand, it does seem to check all the important boxes in terms of construction and functionalities. That spring really looks like it's a bit stiffer, you can see it when he pressed the slide release. In the end, what I'm wondering was - how much dinero you need for it? FN in general tends to demand more dough.
Article with Specs and Pricing: www.gbgunsdepot.com/post/fn-509-midsize
I recently bought an FN 1910 in 32 acp. Haven't shot it yet.
Nice looking pistol. Awaiting "What's for Dinner "👍👍👍👍😎
I used to visit FN’s factory when they were still in Fredericksburg Virginia which was 30 miles away from my house , been impressed with the quality and reliability. Very well made and handsome but too pricey .
Appreciate the video! 💪 man i like the sights on the FN 509.
I have the 509 midsize or, Love it . My edc for 2 years after about 4-6 hundred rounds the trigger smooths out well.
I used to have one. I sold it to help purchase a Sig P210. Now, am thinking of getting one again.
My FN 509 was optic ready. I upgraded the trigger to Apex tactical and upgraded the barrel to a threaded barrel and I upgraded the striker which was Apex tactical also. Of all the guns I have this is my favorite.
Why would you upgrade the striker? We're you having issues with the factory striker??
@@deltaactual8286 the apex striker is better then the original, better quality.
I appreciate the work you put in.
Does that old FN still shoot?
Yes it does!
I was just watching a video on FN. He likes and owns a number of them. Buzzsah.
Very good video, I have this gun.
Well, the interior design looks exactly the same as the older FNS9 I had. The gun functioned perfectly and lockup was was very nice and tight. The reason I don’t have it anymore was that I couldn’t effectively reach the trigger. It was designed for Graham, not me, so it had to go. It wasn’t until the military trials in the mid 10’s someone decided that smaller hands (womxn?) were important, too. The only new pistol from that era that continued to give me any trouble was the P10c, which shouldn’t have surprised me since I had trouble with the P07, too. I’m sure it will feed and shoot anything just fine. Since I was pulling the trigger a little from the side I could not make it very accurate but I’m sure that, in reality, it shot fine. Let’s see how this one does!
Btw, the “womxn” thing was a joke. Don’t get on me, please.
after buying an arex zero1s & grand power p1, i have come to really appreciate fully ambidextrious guns. i have got used to dropping the mag on the right side of the gun with my middle finger. when i switch to carry a non ambi gun, i struggle dropping the mag.
Same here
Read the manual guys. Do not dry fire these or the fns models. The firing pin will break, ask me how I know. I replace both firing pins in my fns9 and 509 with apex firing pins and use a dummy rd to practice.
Sigh 😕 I was afraid the firing breaking was still a thing. Guess I'll stick with Glocks and SIG P320's.
I am a frequent dry firer, and haven't had any breakages in mine, but I do use snap caps.
My FNS9 has a documented 12,837 rounds through it along with enough dry firing time that even a Glock (which I own a few of) is thinking of taking a "break" and has NEVER even hickuped out of line let alone break anything, and my 509 tactical is catching up and no issues what so ever,,,,like anything else it seems guys will repete parrot the one or 2 bad over and over but fail to remember the multiple thousands of perfect ones that offset it,,,but that more than ever seems to be the way of the internet,,,,and no it's been years since I've picked up and read the manual for either of mine since they were new out of box, and those boxes packed away in deep storage so to speak, but I may just dig them out to see what the manufacturers opinion is LOL.
@@MrSmith-zy2bp look at it this way,,,, firing pins are dirt cheap and plenty available even the "improved heavy duty" ones from Apex tactical so why not just get one or 2 as a spare and keep around just in case(Glocks and Sig's break too don't fool yourself) ( however I did just that and as of yet not needed), they also take less than 5 minutes to change because it is rather simple to change, beauty of the FN is there is pretty much 90% parts interchange and compatibility amongst all model new and old pretty much as good as Glock but in a dare I say it much better out of box gun than you get when buying a Glock,,,but to each their own as they say.
Thought they went with a new trigger.
Had one, striker kept failing. Fixed 3 times and sold the pos
Advice, replace your striker assembly with a stronger aftermarket
My first thought when Graham pulled the gun out of the box was: "Damn that looks vanilla..." 😁 On the other hand, it does seem to check all the important boxes in terms of construction and functionalities. That spring really looks like it's a bit stiffer, you can see it when he pressed the slide release. In the end, what I'm wondering was - how much dinero you need for it? FN in general tends to demand more dough.
My thoughts too. It's not a "hey look I'm sexy" gun, but you'll see performance in the second video
@@GBGuns Can't wait. Especially the "what's for dinner" section :D
The FN 509 is most definitely "a gun".
Wonder if they fixed the breaking firing pins yet or not.
At the beginning he asks for advice on the gun from viewers... Replace your striker assembly bud
I have this pistol and it DOES NOT need optic.
Cardboard box?
Not a big deal to me personally🤷♂️all my plastic boxes go into a cabinet never to be used again anyway😆
I want one of these bad but I still think they are over priced .
I just got one on GunPrime with best price request option for $498 altogether.
They make a full size model too little more grip.
You can just put a 17round mag with the adapter sleeve on and have the same thing. Best of both worlds
I always prefer not being poked by a dingus
That's a reasonable preference
Maybe just maybe it's set up for a grenade launcher 😂😂😂😂😂😂😂😂