@@uiliumpowell4684 I have done numerous repairs like this and never any any combat with my repair messing up. Plus the manufacturer would not recommend this method if it would be a problem on their end in the future.
I have a flooring company and do some installs and repairs myself from time to time. This is one the best instructional videos on the subject ever, certainly better than most of the flooring manufacturers' videos. Kudos and a big like to the Southern boys from MI!
really great video bud. have the same cortec type flooring throughout my house and i need to repair a plank after 8 years. one finally was damaged by a painter haha. now you've given me a reason to buy another Dewalt saw and attempt this repair myself. thank you.
Oy mate. Well bloody done. I am an NWFA certified Advanced Installer. I've got the paper work to prove it. I'm also a soccer coach so explaining simple concepts can be difficult at times. I think you did a great job mate. I have installed borders, medallions, mixed media, you name it, etc. You just taught a 20 some year flooring veteran how to do a lvp board replacement. Mad props to you. I've usually just dealt with real hardwood but have had a need to deal with lvp in the last 2 years. Your video was clear and precise. I'll be doing this Thursday for a customer 1/12/23 . Cheers mate
Thank you very much for this. I was literally about to start taking apart an entire room when I came across this video (and part 1). I haven’t been able to get the original installers out. You saved me a ton of time and it worked perfectly. I wish I could throw some work your way but I’m in Alaska. Thanks again.
As a female DIYer, this is one of the best instructional videos I’ve seen. Thanks. I would love to see how to get unsightly “gaps” out of my floor. Also, how the remove a previous shine that was damp mopped onto the floor.
Thank you for this video, I have been doing my own home repairs lately and to know you can do this with a blade is a relief since I'm not comfortable using power tools!! Awesome!!
Oustanding instructional video, with absolutely the best directions and information. What brought me here was that I'm planning on closing in a wide passageway with quad barn doors, and it will require drilling into the LVP of my new home for the guides. Just in case the barn doors are removed in the future, and the opening restored to its original state, I just wanted to know if the drilled planks could be replaced individually. I wasn't sure if that was possible, or if the planks were going to need to be removed from the the damage plant all the way to the wall. Great to know that it is possible to just remove a single, damage plank, and replace it.
Amazing amazing video, take all my likes and subscription, well deserved. For many reasons we wanted LVP and a contractor was trying to talk me out of it because "if even one board is damaged you have to rip everything up leading up to the board". I know there was a way and he was being a salesman. The industry is too huge for there not to be ways to repair after install. THANK YOU SIR!!
Thanks for all the detail and explanation. Better to get it done right than just done. I have a couple of repairs to do on the floor I put down a couple of years ago, and now I have the details to do it right.
Thank you so much for this video. I was worried I was going to have to rip out part of my kitchen floor when I had new cabinets installed but this helped me so much. Amazing job!!
Thanks bro, you explain things very well, you save me in a jam I have to replace a board that I made in overcut, now I get to keep the customers happy thanks a lot but
Recently removed a small wall in my house and did not account for the missing flooring🙃 . Manageable easy to follow video for a novice DIYer. Thank you! Excellent explanation and demonstration. Excited to learn more from your content
Very good and detailed instructive video. Just like some other posters I was afraid of having to replace half the kitchen. Now I’m confident I can tackle this project. Thanks for this video.
I just replaced one of my planks using your instructions. I didn't have a saw so it was tough cutting with a utility knife. But I finally got it out and it looks like new. Thanks for the video.
Love the fact that you’re safe and tell people if you’re not comfortable pulling the utility knife towards you then lay it down. I’m a carpenter, I install doors and windows, I’m like you were not always the safest because we’re professionals, so that’s cool that you laid out the safety options for others because many that aren’t privy to our work will follow word for word. I’m not a flooring guy is why I’m in here and I had new lvp installed and had a small spot of sub floor dry rot afterwards so I have to fix it, I know enough about carpentry to do flooring but I’m only an expert on windows, doors, fences, and seamless gutters. Nice video!
Thanks so much for the very detailed and informative demonstration. I just replaced two damaged planks and it went very well thanks to you! My only concern was with one of the end joints; with the long tang removed there is only edge to edge contact for the crazy glue. I ended up using duck tape on the underside to assist in the bonding. I must say using the Gorilla gel type crazy glue worked great. Keep up the good videos.
Just had about 1,000 sf installed and our biggest concern is "what if." I'm not a great handyman but I am sure I could make this repair based on your excellent video. Thanks!
I'm comfortable with my blade cue to big old cut on his thumb knuckle 🤣 Had a guy do carpet for me, also had a big old cut on his hand from that super sharp carpet knife, just taped it up and kept going. Flooring guys are the best sometimes.
Thank you so much friend, you’ve saved me a lots of time, I thought I had to remove bunch of planks in order to replace the damaged ones in the middle.
Thank you for this. I had to do a rushed job installing my flooring ahead of moving in, and there are some spots that will need to be repaired before the year's out. I feel totally confident that I can do it and do it right now.
Useful video, however you may want to put a warning for eardrum shattering loud banging with the hammer and low volume voice for those with headphones.
Awesome Video and I need to watch this I just finished my floor and didn't notice a bad spot until it was done and it is in the middle of the floor I don't like the idea of removing everything just to get to it P.S. what brand super glue did you use
Hey really good tutorial! Question... what if the newly replaced board tha'ts been glued gets damaged, how would you go about replacing this again? Thanks in advance!
You will probably have to replace the boards that are a joining the replaced bored as well. It will damage the other plans when you try to take up they already replaced board
@@zatoidarkchi a glue gun that uses hotmelt adhesive will not work, the adhesive will be too thick, and you will have a lip around the edge of your plank because it is higher than the adjoining planks
@@cr8z4vball It has been a while since I have dealt with that product but when you look at it you will be able to tell if you have to remove it or not for it to lock in place, I don’t believe you have to do three sides only one or two I can’t remember
Thank you for this. I have a piece of flooring in the middle of our living room that has a huge gash in it. I'm worried that over time, with the flooring being floating, that if I glue down a new piece down the edges will start to flip up one the flooring starts to settle over time.
Great video, like others I was just about to tear up my kitchen floor to get to the piece that needs repair. I just put it down a month ago. There seems to be a hollow area under thos one area and caused the locking system to break. I am assuming i am going to have to fill that in with some leveling material, any thoughts on that?
Will this effect the water-proofing the floor claims to have? I have a problem with a board in the bedroom right in front of the bathroom and I thought about cutting the locking groove but I am concerned about losing its water-proof potential.
Yes, it will, if it is in front of the bathroom and you have a water leak then the water is going to run under the flooring. Regardless, people never think about that the industry tries to pull the wool over peoples eyes with the whole waterproof thing.
I appreciate the instructional video. Are there any risks with cutting off three of board lock? Like it popping up in future. Also, I saw the one you removed was for scratch. Is it easier to replace board or trying to repair scratches if even possible on lvp. Thank you !
Great video and great info. I would only suggest using a lavalier mic to pick up the voice, and then merge that in during post production. Much appreciated!
If I have 3 boards already installed on my floor that are all snapped to eachother and I want to replace those 3 can that be done without taking all the rest of the flooring out since they are in the middle of my kitchen.
Oh no, sir you do not glue it to the floor. You only glue it to the adjoining plant. If there is nothing to hold it to those next planks, like just a tight fit, then it will work its way up and get damaged by traffic.
My NEW channel…youtube.com/@FlooringInstallationtricks
I wonder how glued on planks look after 2 years
@@uiliumpowell4684 I have done numerous repairs like this and never any any combat with my repair messing up. Plus the manufacturer would not recommend this method if it would be a problem on their end in the future.
Thanks, you so much for educational video! Take care too!
@@scottfailing7045 you’re welcome, merry Christmas
😊
I have a flooring company and do some installs and repairs myself from time to time. This is one the best instructional videos on the subject ever, certainly better than most of the flooring manufacturers' videos. Kudos and a big like to the Southern boys from MI!
Thank you sir
You know your a pro when you got pro knees
I agree with alexander. perfect repair!! great instructional video!!
Very nice and easy instructional video! This helps beginners and experienced journey men. Thank you
Very well detailed. Like the other guy said “one of the best examples and explanations “. Very good!
Glad you liked it!
Ive been doing floors over 20 years.. This guy is a great teacher.. Spot on..
Thank you , I really appreciate that man
@@FloorsbySouthernboys keep up the great work..
@@colin7763 😀👍
really great video bud. have the same cortec type flooring throughout my house and i need to repair a plank after 8 years. one finally was damaged by a painter haha. now you've given me a reason to buy another Dewalt saw and attempt this repair myself. thank you.
Awesome, good luck my friend
This is an EXCELLENT video. Great detail and easy for anyone to follow.
Oy mate. Well bloody done. I am an NWFA certified Advanced Installer. I've got the paper work to prove it. I'm also a soccer coach so explaining simple concepts can be difficult at times. I think you did a great job mate. I have installed borders, medallions, mixed media, you name it, etc. You just taught a 20 some year flooring veteran how to do a lvp board replacement. Mad props to you. I've usually just dealt with real hardwood but have had a need to deal with lvp in the last 2 years. Your video was clear and precise. I'll be doing this Thursday for a customer 1/12/23 . Cheers mate
Awesome thank you for sharing that
@@FloorsbySouthernboys please inbox me.
Thank you very much for this. I was literally about to start taking apart an entire room when I came across this video (and part 1). I haven’t been able to get the original installers out. You saved me a ton of time and it worked perfectly. I wish I could throw some work your way but I’m in Alaska. Thanks again.
Glad to hear
Tried to follow another video showing how to do this and messed my floor up now I can follow yours and actually fix it.
Thank you SO much.
I can't thank you enough for posting this detailed video on the process of replacing a damaged plank!! Great job!
As a female DIYer, this is one of the best instructional videos I’ve seen. Thanks. I would love to see how to get unsightly “gaps” out of my floor. Also, how the remove a previous shine that was damp mopped onto the floor.
Thank you. And when I get to the situation, I will show that repair.
Nice job. Great details and explained fully without assuming people knew anything.
😀👍
Thanks for the tips on repairs. Will be doing one soon. Much love from LA. Graham Floor Covering
Yw
You saved my bacon, I was ready to pull up all the flooring to get to the bad plank. Thanks for a very informative video.
You’re welcome
absolutely outstanding instructional video (both this one and part 1). Thank you so much!
Glad you enjoyed them,
Thank you for this! I installed my floor myself and it needs repairs in several places. Thank you for taking the time to make this video.
Glad you found it useful, and good luck on your repairs buddy
Thank you for this video, I have been doing my own home repairs lately and to know you can do this with a blade is a relief since I'm not comfortable using power tools!! Awesome!!
You’re welcome and I hope your repair turns out great
Will be giving this a try soon, have to replace two adjacent planks though instead of just one.
Doing this for the first time tomorrow. Thanks for the advice. I normally do hardwood repairs, this will be my first LVP repair
I’m sure it will turn out right
Oustanding instructional video, with absolutely the best directions and information.
What brought me here was that I'm planning on closing in a wide passageway with quad barn doors, and it will require drilling into the LVP of my new home for the guides. Just in case the barn doors are removed in the future, and the opening restored to its original state, I just wanted to know if the drilled planks could be replaced individually. I wasn't sure if that was possible, or if the planks were going to need to be removed from the the damage plant all the way to the wall. Great to know that it is possible to just remove a single, damage plank, and replace it.
These videos just saved my butt
I accidentally torn up a tile while moving stuff around. Now I can fix it before my roommate gets home!
😀👍
Amazing amazing video, take all my likes and subscription, well deserved. For many reasons we wanted LVP and a contractor was trying to talk me out of it because "if even one board is damaged you have to rip everything up leading up to the board". I know there was a way and he was being a salesman. The industry is too huge for there not to be ways to repair after install. THANK YOU SIR!!
Absolutely, that is ridiculous to think that
Great temperature acclimation tip! Great angle cutting tips too! EXCELLENT!
😀👍
Thanks for all the detail and explanation. Better to get it done right than just done. I have a couple of repairs to do on the floor I put down a couple of years ago, and now I have the details to do it right.
Thank you so much for this video. I was worried I was going to have to rip out part of my kitchen floor when I had new cabinets installed but this helped me so much. Amazing job!!
That’s good to hear, glad it helped
Great information, explanation and demonstration.
Thank you,glad it helped
Thanks bro, you explain things very well, you save me in a jam I have to replace a board that I made in overcut, now I get to keep the customers happy thanks a lot but
What a great video!! Thank you for always sharing what you do to help us become better installers!!
Thank you taught I’m glad you liked it buddy
I did finally replace my plank and thanks to you... I worked out great!!!! Thank you so very much.
That’s really good to hear, congratulations on your successful replacement
Recently removed a small wall in my house and did not account for the missing flooring🙃 . Manageable easy to follow video for a novice DIYer. Thank you! Excellent explanation and demonstration. Excited to learn more from your content
Thank you very much for your feedback
Absolutely wonderful video and very helpful
Oh man thank you so much, really glad you enjoyed it and glad it helped
Very good and detailed instructive video. Just like some other posters I was afraid of having to replace half the kitchen. Now I’m confident I can tackle this project. Thanks for this video.
😀👍
I just replaced one of my planks using your instructions. I didn't have a saw so it was tough cutting with a utility knife. But I finally got it out and it looks like new. Thanks for the video.
Awesome man
Thanks , You are an excellent instructor after watching you I am trying the repair myself
Very nice removal and follow up video. Thought out nicely. Appreciate the time and hard work put into this video. Thanks
Thank you sir
Love the fact that you’re safe and tell people if you’re not comfortable pulling the utility knife towards you then lay it down. I’m a carpenter, I install doors and windows, I’m like you were not always the safest because we’re professionals, so that’s cool that you laid out the safety options for others because many that aren’t privy to our work will follow word for word. I’m not a flooring guy is why I’m in here and I had new lvp installed and had a small spot of sub floor dry rot afterwards so I have to fix it, I know enough about carpentry to do flooring but I’m only an expert on windows, doors, fences, and seamless gutters. Nice video!
Awesome, thank you buddy good luck with your repair
Thank you brother for sharing your skills....
Hopefully I get my project to look as perty this vid.
Well done👍👍
You’re welcome, you will do fine
Thank you for the outstanding video. Now, even a guy from California can do a vinyl floor repair.
😂😂👍Awesome
Very nicely done! Really appreciate your attention to the details during explanation!
thank you
Thank you !! Your method is impressive.
Thank you
Thank you!! This is exactly the video I needed. Very helpful and detailed and you made it seem easy. Very much appreciated.
You’re welcome, glad to help
Awesome video!
@@carminenorcia1193 😀👍
Thanks for the detailed videos getting ready to list my place and need to repair some spots this was a huge help!
Awesome, hope everything turns out well for you
Thanks so much for the very detailed and informative demonstration. I just replaced two damaged planks and it went very well thanks to you! My only concern was with one of the end joints; with the long tang removed there is only edge to edge contact for the crazy glue. I ended up using duck tape on the underside to assist in the bonding. I must say using the Gorilla gel type crazy glue worked great. Keep up the good videos.
Awesome, glad to help
thanks for the video... I needed to see how to replace a damaged plank myself..
Great video, thank you for showing me how to do this I have to do a plank in my home today
Good luck I hope it turns out great
Thank you for both videos. Amazing and simple to follow. I've been dreading having to do this until now.
Man that’s really great to hear, thank you for sharing that
Awesome work! Thanks for sharing your knowledge and insights. It saved me a lot of time and potential heartache
You’re welcome buddy thank you
Thank you so much for this!!! … It’s all fun and games until a plank shifts out of place or gets damaged!
😀👍
Just had about 1,000 sf installed and our biggest concern is "what if." I'm not a great handyman but I am sure I could make this repair based on your excellent video. Thanks!
Awesome
Thank you so much!! You explained this process so clearly!!
Awesome thank you
Thank you. Very informative video in small details. Very impressive. Thank you again
I'm comfortable with my blade cue to big old cut on his thumb knuckle 🤣
Had a guy do carpet for me, also had a big old cut on his hand from that super sharp carpet knife, just taped it up and kept going. Flooring guys are the best sometimes.
😂😂 we are a different breed
Thank you so much friend, you’ve saved me a lots of time, I thought I had to remove bunch of planks in order to replace the damaged ones in the middle.
Awesome, good luck on your project, I hope it turns out well
Awesome video!!
Thank you
Very very nicely done sir Ty
Thank you kindly
Nice explanation of the process, thank you Sir!
Thank you and you’re welcome
Very good video...
Awesome, glad it was helpful
Thank you for this. I had to do a rushed job installing my flooring ahead of moving in, and there are some spots that will need to be repaired before the year's out. I feel totally confident that I can do it and do it right now.
Awesome
Great video
Thank you, I hope it helped
once again the work is second to none. but the the volume being so low is about an equivalent as reading instructions in swedish
Yeah I’m not sure what happened to the volume on this one
😂
Thank you for this. I had someone come out telling me I needed 8 boxes to fix two scraped up panels.
They were smoking something.
Very good video 👏
Thank you
Levelator- it works magic on your audio.
Useful video, however you may want to put a warning for eardrum shattering loud banging with the hammer and low volume voice for those with headphones.
Sorry about that sense switched microphones
Awesome Video and I need to watch this I just finished my floor and didn't notice a bad spot until it was done and it is in the middle of the floor I don't like the idea of removing everything just to get to it
P.S. what brand super glue did you use
Gorilla glue super glue
Thanks perfect ly explained
Glad it helped
Hey really good tutorial! Question... what if the newly replaced board tha'ts been glued gets damaged, how would you go about replacing this again? Thanks in advance!
You will probably have to replace the boards that are a joining the replaced bored as well. It will damage the other plans when you try to take up they already replaced board
@@FloorsbySouthernboys do you think a glue gun will be able to remove the job without damaging the surrounding boards?
@@zatoidarkchi a glue gun that uses hotmelt adhesive will not work, the adhesive will be too thick, and you will have a lip around the edge of your plank because it is higher than the adjoining planks
@@FloorsbySouthernboys apologies misspelt glue gun!.. I meant heat gun.
@@zatoidarkchi oh, I gotcha. I don’t know if a heat gun will have an affect on super glue or not. I have never tried it.
Great job. I don't know how you could improve it.
Thank you! Thank you! Thank you! Exactly what I needed.
Awesome, glad to help
Thanks for the video! Can you do this same thing with Lifeproof vinyl plank flooring? The type I have has two male and two female locking edges.
Life proof would be easier because you would not have to manipulate as much of the plank because it is a drop lock system
@@FloorsbySouthernboys with drop lock floors, do you remove the groove sides or the tongue sides? Thanks
@@cr8z4vball It has been a while since I have dealt with that product but when you look at it you will be able to tell if you have to remove it or not for it to lock in place, I don’t believe you have to do three sides only one or two I can’t remember
Fantastic. Thank you. Very helpful - you're a great teacher.
Thank you
Excellent video dude
Thank you for this. I have a piece of flooring in the middle of our living room that has a huge gash in it. I'm worried that over time, with the flooring being floating, that if I glue down a new piece down the edges will start to flip up one the flooring starts to settle over time.
Great video, like others I was just about to tear up my kitchen floor to get to the piece that needs repair. I just put it down a month ago. There seems to be a hollow area under thos one area and caused the locking system to break. I am assuming i am going to have to fill that in with some leveling material, any thoughts on that?
Superb video
Thank you buddy, i hope it helps
Thank you sir this is exzactly what i was looking for
Awesome, glad to help
Will this effect the water-proofing the floor claims to have? I have a problem with a board in the bedroom right in front of the bathroom and I thought about cutting the locking groove but I am concerned about losing its water-proof potential.
Yes, it will, if it is in front of the bathroom and you have a water leak then the water is going to run under the flooring. Regardless, people never think about that the industry tries to pull the wool over peoples eyes with the whole waterproof thing.
Thank you for that helpful video.
😀👍
I appreciate the instructional video. Are there any risks with cutting off three of board lock? Like it popping up in future. Also, I saw the one you removed was for scratch. Is it easier to replace board or trying to repair scratches if even possible on lvp. Thank you !
Excellent video! Thanks.
Great video and great info. I would only suggest using a lavalier mic to pick up the voice, and then merge that in during post production. Much appreciated!
Thank you
If I have 3 boards already installed on my floor that are all snapped to eachother and I want to replace those 3 can that be done without taking all the rest of the flooring out since they are in the middle of my kitchen.
I have the same issue. I hope he answers you soon.
Great job sir long live
Excellent tutorial. Very thorough explanation! Thanks!
Thank you
How did you glue down the end on your left in the video?
One of them snap him with the original locking mechanisms and the other one had to be manipulated that’s why it had to be glued
Awesome video. Best one I've seen yet.
Thank you
I may attempt this
Instead of using gorlia glue ,would two side tape work better?
No sir, Gorilla glue is going to work best
Superglue sets up very quickly so wouldn't the first drops be dry before you finish getting all of the drops of glue down?
Well instructed, Good training skills, Thanks a lot.
Thank you
Excellent tutorial!
Glad you liked it!
When it fits that tight why do you have to add glue? And does it mess with the “floating” aspect needed by the floor?
Oh no, sir you do not glue it to the floor. You only glue it to the adjoining plant. If there is nothing to hold it to those next planks, like just a tight fit, then it will work its way up and get damaged by traffic.
Exactly what I needed, thank you!
😀👍
You did a great job!!! I'm going to do this. Thank you
Thank you and you’re welcome, Good luck friend, I hope it turns out nice for you
Thanks you’re the best
Thank you
Great info, thank you. Will this trimming technique work on SPC core locking systems?
And will work on any of them as long as you cut off the right locking mechanism
great hack...very well explained....
Thank you sir I hope it helped
This plank flooring has a wooden core, what if it were all plastic, the water proof type. How would you cut it.
You can do it with a utility knife if you cut three or four times it will go all the way through
Exactly what I needed. Thank you so much!
Awesome glad it helped