How To Fill Hollow Spots Inside Vinyl Plank Flooring LVP Laminate And Engineered Hardwood Floors DIY
HTML-код
- Опубликовано: 26 сен 2024
- ITEMS I USED:
- Injector Syringe - amzn.to/3o2dBbl
- 1/8" Drill Bit - amzn.to/3bsZ0zE
- 1/8" Impact Drill Bit - amzn.to/3jOnYhq
- DAP EXTREME Stretch Caulking - amzn.to/3CJ5dmQ
- BIG STRETCH Caulking - amzn.to/3GFRuQc
- Caulking Gun - amzn.to/3GGttZh
- Soldering Plastic Weld Iron - amzn.to/3jSJx0o
- Suction Cup Heavy Duty - amzn.to/3BuqK1l
- Wood Glue (Non Floating Floor) - amzn.to/3jSthws
- Great Stuff Foam All Purpose - amzn.to/3vYuabC
SHOP MY ONLINE AMAZON STORE AND CHECK OUT ALL THE TOOLS I USE! www.amazon.com...
On this video I'll be showing you how to fill hollow spots inside vinyl plank flooring (LVP), Laminate flooring and Engineered wood flooring. This method I show on this video demonstrates how I fill a hollow void space inside my vinyl plank flooring. This method will work on other types of flooring as long as you use the proper adhesive or compound to inject inside your flooring.
DO YOU HAVE QUESTIONS ON YOUR HOME REPAIR OR DIY PROJECT? GET TIPS, ADVICE AND ANSWERS! BECOME A FIX THIS HOUSE MEMBER!
Become a FIX THIS HOUSE Member by clicking on this link: / fixthishouse
Please Subscribe To Our Channel! / fixthishouse
FOR BUSINESS INQUIRES SEND TO:
FIX THIS HOUSE
P.O. BOX 2511
BREMERTON, WA 98310
UNITED STATES
FOR BUSINESS INQUIRES EMAIL ME AT:
fixthishouse1@gmail.com
DISCLAIMER:
Videos produced by Fix This House are provided for informational, educational and entertainment purposes only. Please use SAFETY precautions when following the tutorials on these videos. Viewers doing projects at their own home are doing it at their own risk and Fix This House cannot be held liable if they cause damage to their homes or injury. Fix This House cannot claim liability with all applicable laws, rules, codes and regulations for a project. Always stay informed of your local building codes! Happy and SAFE renovating!
#vinylplankflooring #Engineeredflooring #Laminateflooring
Excellent video and very helpful. We followed your directions, and our soft spots (vinyl plank) feel 100% better now. But you make it look a lot easier than it is, as far as pushing the caulk out of the injector tube. We finally got a system going that worked well, and I'm so thankful we found your video.
Thank you so much! I’m glad I could be of help! 🙏🏽😊👍🏽
It helps to warm it up, also, I used needles meant for livestock...
@@FixThisHousedo you think there's a limit to how many spots you can use this on in a house?
@@rickygreer1727 Warm what up? The caulk?
What is your long term experience?
40 yrs. as a license flooring contractor in LA. I have to say, this is the best repair technics I ever seen. CONGRATULATIONS!!
you gotta love youtube :))
Making plugs out of a scrap vynl is better less risk of damaging a board especially one that's in center of room burning pieces it doesn't work long term from experience on fixing people doing this
@@Kindaokcarpentry thank you. thank you
Where in LA are you? I may need your services. I am in Slidell. Thanks
@@ernestocaamano7818 Hi Ernesto, I was in the area of Beverly Hills, Santa Monica, Downton for the commercial jobs, and I say 60 to 70% of my business was new homes in the Santa Clarita, ventura, oxnard, SimiVALLEY etc. I moved to SA Texas 6 yrs ago and was running my business from here, and going once a month to check things with my guys.Becouse the COVID and other reasons the companies that I had contract for the new homes lost the contract with LENNAR, and DR HORTON. I decided to close doors, and retire here in TX. If you need some contacts for some work I can give you a couple of names of guys that used to work for me. REGARDS.
I did multiple Google searches, browsed r/ flooring subreddit, spoke to a pro flooring store owner, and a long time handyman. All said the same thing. Rip out the flooring to the point where the vinyl tiles broke and reinstall.
There are other videos that similar to yours but yours is the best. You didn't use a brand name kit like Fix-a-Floor but to use what can easily be found and can be reused later. Fix-a-Floor kit has to be ordered online. Only the caulk tube is available at HD. You also provided a shopping list. Thank you.
Great video! One piece of feedback is to add blue tape over the drill spot before drilling the holes. This way when you fill the holes, the tape serves to protect the area around the hole. Similar to using it before nailing trim to the wall
I was going to make the same comment. Smearing caulking over the face of the laminate to wipe it off made me cringe...
Ah yes, blue tape over the hole to protect more from the soldering iron as well. Thats a great addition!
Great video! I read through all the comments and ran an experiment. I clamped a LVP plank to plywood and tried wood glue VS Big Stretch Caulk. Findings: Big Stretch created a strong bond to the pad attached to the the LVP plank and plywood. Wood glue bonded to the plywood but only created a weak bond the padding on the LVP. This bond was so weak that any expansion of the floor will break the bond and allow the plank to float as designed. Also note the wood glue dry time was way faster. I am planning to use wood glue and break the bond by using a suction cup to pull the planks up after the glue cures. Also, plastic welding did not go well for me I found that Robert’s Caulk worked great to fill the practice holes. I did use a heat gun with the caulk as it made it more pliable to work with. One additional tip is to use a suction cup or tape to pull the floor up the flooring when drilling so you don’t drill into the subfloor.
Exactly what I was thinking that Big Stretch would definitely glue a floor down where the wood glue is only going to stick to the wood floor and probably not to the backing pad of your vinyl plank so you save me the time I'm having to do that experiment thank you
Hey Remington, How did the wood glue hold up? Any issues with your floor after putting it in?
Did you try the wood glue? If so, how did it work?@@MADDOG100ful
Did you try the wood glue?
So we just installed laminate plank flooring and we do have a few spots that are hollow. I suggested to my husband that we inject something through the floor to fix it and he said “that’s possible to do, it just has to stay the way it is”. HA! I may not, until now, have known how to do it, but it made sense that it could be done. I’ll fix the floor…..then show him your video. Thank you for this you rock. ❤
Thank you. Excellent video. I would recommend using a level to judge how much upward deflection you have as you fill the void and then use it to push it down flat...then let it dry. I wouldn't use a bucket on it and potentially create another low spot. Your hole patching instruction is great.
We just moved into a new house and have 3 soft spots that are driving me crazy with LVP flooring. I had been searching for repair videos for a while and todays yours popped up. Excellent job with straight to the point instructions, thank you sir!
Thank you so much for the love and feedback! 👍🏽😊
VERY relatable... Likewise, thank you!
Were you able to fix it. I am having same issue with my flooring
All of your videos on repairing vinyl planking were helpful. I purchased the tools your recommended and all went well. I purchased a adhesive which was colored to match my flooring and this made it even easier to fix without leaving any sign of my work. Keep up the good work.
@@dennischaput3650 us the repair holding up still?
How is it doing now?
35 year flooring installer and always learning. Thanks for sharing.
Thank you so much for the love and support especially from a pro! 🙏🏽😊
Damn so helpful. I was stressed the eff out after my install. Thank you from a fellow Pinoy.
Walang Anoman Pare Ko 👊🏽😎
Your expertise in addressing and resolving issues is characterized by meticulous attention to detail and comprehensive techniques. Awesome video, as always.
Dude, you killed it with this video. No fluff, just VALUE!!! Thank you.
Thank you so much!! 🙏🏽😊 Have a great weekend my Friend!
I tried this and the Extreme Stretch never cured. 3 weeks later I had to remove the flooring, self level, and reinstall flooring. Was still wet like I just filled it. Though this didn't work for me, I hope it works for others. Love your videos!
That's what I was thinking, that it would never cure.
That soldering iron trick is some next level stuff. Good info, solid video. Thanks
Here I am, 6 months later after you posted this awesome instructional video and I can not thank you enough! But hey, thank you very much! We just bought a brand new home and the floor has soft spots in many areas. Again, thank you!🙏
Question the soft spot is completely gone?
I cannot thank you enough for posting this video. Everything worked as expected. I had a pretty sizable mini-hump under one small row in a transition spot where there was some house settling. I didn't floor level there, which I prob should have but forgot to. This took care of it and it even looks better to the eye when you look at it (It was starting to show a small dip). Solid as a rock and event now. Thanks again!
I have essentially the same problem to solve. Would you willing to chat before I try mine?
😂….a total coincidence. My house is a Vaughn Construction build. The crack drives me crazy. My wife says I “feel” with my feet.
Your advice would be greatly appreciated!
Ron
Good Job! You taught me something new!
Thank you! I’m glad I could be of help!
Wow! What a great idea. I've been sitting here feeling so defeated from the discovery of a hollow spot I my newly installed engineered hardwood. Was planning to take it all back up to get to the spot and fill it with leveling compound. This will save me a ton of time and headache (wife will be glad too). Cool!
Call you installer his job to fix hollow spots !! He should have checked slab / subfloor prior to install
Omg I thought I was the only one had this bad issue. I'm experiencing the same with my flooring, newly installed and felt so defeated.
@@Bird2-2-20 What if it was DIY and they are the installer? Who do they call. BAHAHAHA
Very nice video that helped fix a 6" x 6" soft spot beneath my newly laid LVP floor. Used a full tube of the Big Stretch, but after two days is rock-solid. Like others have stated, the suggested injector is really a rotten piece of made-in-China garbage; however, it's probably not made to push something as thick as caulk. After a lot of fiddling with the injector I got it to work satisfactorily. Great job nevertheless!
Very happy to have found this. A friend just had some work done on her house by a contractor hired from a home improvement store. They fouled up several things, including the installation of the floor. This solution is exactly what I need! Thanks very much.
I’m glad I could be of help! Thank you for watching! 🙏🏽😊
I have the exact vinyl floor, even the same color. I have a hollow spot that I assumed would require ripping apart the flooring so I just learned to live with it, then I accidentally came across this video and now I have confidence I can fix it for free! Thank you!
I’m glad I could be of help and I hope this method will solve your problem 🙏🏽😊
yo dude you're a genius because I was stuck!!!
Thank you! 🙏🏽😊
I've been installing for 21 yrs, we actually have needle kits with smaller needles and a special liquid filler and dowel pegs for this.
You have the right idea. The sodering iron is a bad idea. Just use wood dowel pegs, knock it in with the small hammer, break it off, knock it in a little below the surface with a nail puncher, then fill with matching vinyl putty
Care to share names of the kits and liquid filler?
@@MILKMANDELIVERIES I would also like to know
Great video. Well done.
You could also use a wax crayons of a few different colors that closely match the flooring color. 👍
Thanks for the excellent video. I found this after seeing some similar videos, but yours is soo great, thanks.
I had a few issues which i think will help others in the future.
1) Sealant/Caulking product recommendation: I'm in Australia and we don't have DAP products here. The most flexible stretchy sealant I could get was 35% (H.B. Fuller® FulaFlex™ 550LM Polyurethane Joint Sealant). However, I'm confident that this will allow enough contraction and expansion in my area.
2) Viscosity of sealant:
2.a) The sealant I used was to viscous to come out of a 5mm meat marinade injector, at least I didn't have the strength to push it through and I could see failing, so I ended up using a caulking gun with the end of the nozzle which fitted snug in a 5mm drilled hole.
2.b) I couldn't get the sealant to fill the voids nicely, I inserted as much as I could before was unable to push anymore in. This helped fill the worst spots which I'm pretty happy with, but had to drill more holes than i had hoped. I might try in the future to find a product that is less viscous and flows easier to allow it to dissipate under the floorboards.
3) Filling the drilled holes: I tried your solution in this video and confirm it works, however i wasn't happy with the finish and as I had more holes I ended up landing on another solution which I think works perfectly. I bought a 5mm leather hole wad punch, and used this to hammer out exact fitting plugs from a spare piece of floorboard (I have 8mm thick laminate engineered floorboards with cork on the base). I then simply used some glue and inserted the plugs into the holes. Any evidence of the holes completed disappeared, takes a long hard look to even find where the holes were.
Thanks again 👍
Crazy... Crazy good! I do flooring, professionally, I've always tore the floors up when I discovered a soft spot and relaid them... I also have a different method of patching holes and gaps, I use wood putty, and stain markers, or shavings like you did...
Thank you 🙏🏽! Means a lot coming from a pro! 👍🏽😊
Do you think plastic wood would work with the holes in lvp, and then I could just stain the plastic wood to match the flooring?
Thank you so much!!! We had flooring installed and a few months later we had floating areas. Our installer was in a serious accident breaking his pelvis. I figured we were just stuck. Did I mention…. THANK YOU! Bravo on the video.
Thank you so much for filming this video. I took my time injecting the Extreme Stretch , put 2 paint cans over the fixed spot for 2 weeks until it set and voila! My floor feels 100% firmer now. I appreciate you!
Just curious, how is it holding up 1 year later?
@@bmiller8461 It's just like the day I did it. I have used it on a second floor since then too and no problems on that one either.
@kristin8809 so, contrary to what others are saying that it could cause issues with the expanding and contracting of the vinyl flooring, you haven't experienced any problems with expanding/contracting planks?
@@bmiller8461 None at all. Repairs were lvp on concrete slab if that helps.
@@kristin8809 I had the same problem right now. I had vinyl on-click floor on the self-leveling compound (I dont know if the translation is great but some "cement" that should self level). Sadly, but the compound has some pits, and vinyls are not laying on the compound directly there which creates a hollow spots and the irritating noise when walking on it
Don't you have any problems with caulk drying? I'm wondering about applying the method from the video but I have doubts about the drying..
Thanks for the video. I had a floor "professionally installed" about a year ago. Two hollow spots the broke the lower halves of the female sections of the click mechanisms. One right in front of the fridge and the other right in the middle of a high traffic area. They refused to fix it so I refused to pay them for the labor and prep. Anyhow, I watched this video and went into my garage. I saw a tube of liquid nails and one of those adaptors that you use to fill up a football. I cut the angled hole off the adaptor to make it straight. I then cut the tip of the liquid nails tube just a little smaller than the male threads on the adaptor. Slightly heated the caulking tube end, with a lighter, to make it just flexible enough to press the adaptor threads into it. This eliminated the need for the injector from Amazon. The liquid nails that I used is this enough to flow through that little pin so the holes that I drilled were tiny. The liquid nails also matches my LVT. Also, one of the planks sat low. Instead of a suction cup, I ground the point off of a wood screw and threaded into a hole and screwed it in until the, now blunt, end of the screw bottomed out on the subfloor and lifter the plank up to the proper level. I should add that there is a plastic vapor barrier between the plywood subfloor and LVT so, I don't think adhesion will be an issue that concerns the expansion and contraction of the planks. I just hope the liquid nails set up in a timely manner. Fingers crossed.
Excellent repair ! I have a low spot in my hallway that has engineered hardwood that needs fixing, now I am confident I can do it myself using the Dap Big Stretch and the Cookment kit . I will found 1/8 dowels at Hobby Lobby and I have matching stain I use for scratches to cover the tops of the dowels. Thank You !
Did you patch the drill holes the same way he did? I wasn't too sure if it would work on the engineered wood as opposed to the plastic stuff.
This saved me literally 1500 dollars at my last apartment. My kids bathroom was horrible, I did this and it worked🤗
Thank you sooo much ! As a new home owner it's always good to have such great pro tip videos up your sleeves. This video is a defenite keeper in my books. Appreciate you so much. Thank you !
I’m so glad I could be of help! And thank you so much!
I use mud bucket as weight allot too. Thanks for tips
He doesn’t know what he is talking about . This is not the correct procedure. This is a floating floor and MUST be free to move . Gluing it will cause further problems.
2 years later... still relevant, Excellent teaching video. THANKS!
The ending with the solder gun was Sick. Well done you should be proud of your skills.
Thank you so much! I’m glad you found that technique useful 🙏🏽😊👍🏽
Wow. I just finished installing some LVP and the baseboards, and after all said and done, I had noticed there were two pockets. This is gonna save me a lot of time and energy and headache thank you!
Great video. I followed your directions but added the help of the caulk gun by nestling in the syringe into the space where the caulk tube fits. It made it a lot easier to express caulk out of the tube. I also ordered a trephine (dental implant) drill bit to make 1/8” cores of sample plank to fill in the hole spaces. I won’t get it for a week, so I’ll tape up the holes after drying the caulk until then. Thanks for the technique.
wait so you'll put the sample plank to cover the hole instead of soldering the plastic like in the video?
@@dimepia123 Yes, but just small 1/8th inch wide circular cores cut out of the sample boards. I used light, medium and dark colored ones to match the holes I drilled.
@@larrydrum Very meticulous, amazing!
Did you also make two holes prior to filling up the space with glue, the second hole being used for the trapped air to exit or you didn't need to?
@@dimepia123 Yes I did. I also used the solder to blend and hold the cores in place. Regarding the holes, I found I had to make more than I expected. The caulk didn’t flow laterally that well. Maybe next time, I’ll use a rubber mallet to help it along.
Two clever ideas! 1) the caulking gun assist and 2) the cores made with the dental drill. Thanks for the ideas.
One of the coolest videos I’ve ever watched in floating floors.
Floating subfloor prior would be the best bet but this is extremely clever. I am sure I will use this as I am a floor guy that has a high focus on repairs. Big money doing what others won't make time to do. Just a tip for the aging floor guys that can't do the up and down all day everyday. ....Do repairs. 🙂
Thank you 🙏🏽!
I had never thought about doing something like this to fix low spots- brilliant! Thanks for the video, after 25 Years of remodeling I still learn something new every Day... I can't remodel anymore though, got a permanently bad shoulder that keeps me from using it for much more than everyday stuff. I still work on stuff, just very slowly over long periods due to the shoulder so I can't make money remodeling anymore. Still, this will help me improve a couple spots in our basement :D
Man o man, you are awesome!!!! You rock!! I had problem with my floor. You saved me so much money and also helped me fix my floor. Thank you so much.
Thank you so much for the awesome feedback! I’m glad I could be of help! 🙏🏽😊
Dang, the plastic welding is genius! Thanks!
Thank you 🙏🏽!
Ok so I know you are a professional, I understand that, I am aswell, your work is genuine. This is more of a seasoned industry secret. So always keep a pin nail or thin tack nail in your pouch, if you place it in your drill as a bit it actually works better then a normal drill bit because it heat drills through the surface leaving a natural edge, then to fill the hole get some charcoal from any art store and a wax block for flooring, place crushed charcoal on other surface and rub the wax end through it, tell it blends in the wax, then take the wax and fill the hole, you can use a sealer, dull nail coat(nail polish works well) although the wax will harden on its own so you don't really need it, you always use charcoal because it imitates a feature mark, like a natural burn or deep tannin spot, it work on any floor and unless you are eyeballing every square inch of floor like a nut, it will never be noticed as a blemishe.
Are you saying that this method of fixing the floor with stretchy caulking has routinely been practiced in the industry?
@@youtubestaffaretrash9258 what???
@@youtubestaffaretrash9258 What about answering my question? LOL "Are you saying that this method of fixing the floor with stretchy caulking has routinely been practiced in the industry?"
@@youtubestaffaretrash9258 I understand that a professional would not have made the mistake in the first place but I think this video is more of a tutorial for people who did not have a professional level the subfloor and need something to address the problem as a fix rather than tearing up the entire floor, leveling, and replacing.
Great tips. I can't wait to try it in the morning. I love your videos. The best I've seen so far. Im remodeling a fixer upper mobile home for my dad. I'm not skilled at all so I feel I'm reinventing the wheel until now. There is still lots to do but after finishing the flooring and the trim, the fromt room will be done. So glad i found your videos. I was at a standstill. I have air pockets in the flooring and I cant seem to get the last row of the flooring to fit tight. After watching your videos I'm pretty confident that i can do it. Thank you so much
Thank you so much! I wish you well in your renovation project! 🙏🏽😊👍🏽
This is a great idea. Almost impossible to get a perfect floor without dips or unevenness. Can you still use this solution if you have a foam underlayment barrier between subfloor & the vinyl plank?
Big thanks for this video mate - sorted out a sagging floorboard in my kitchen by drilling 5 small holes and filling with a hardwood colored flooring specific 'no more gaps' product. Much better option than having my kitchen ripped up and re-laid (which is what the retailer and original installer recommended). LOL :P
That's a pro tip for sure. Great vid. Definitely didnt waste my time on that.
Thank you so much 🙏🏽😊!
@@FixThisHouse you're welcome.
And I bet the soldering gun will work on composite decking as well for any mishaps and what not.
Had I known this hollow thing would've happened with vinyl flooring, I would've installed real hardwood floor. But thank you for putting put my hollow misery! No more depressing squoosh.
Vinyl is actually very strong and last long, it’s just needs proper prep and leveling before laying down. Thank you so much for watching 🙏🏽😊👍🏽
You can also just drop a golf ball from 3-4’ and you will hear a ‘thunk’ if there is air in the hollow spot. You will hear a distinct ‘clink’ if there is no air in the hollow spot.
That’s great advice! Thank you for sharing! 🙏🏽😊
This worked out well for me. The oinly thing I did different was to utilize a chipped overlapping edge to access below the floor. I then glued the edge back down, because I had no replacement planks
Thank you for taking the time to share your expertise with all of us!
Thank you so much for watching! 🙏🏽😊
Where was this videos 3 months ago?? I had a guy come out and made my floors worst than they were before he worked on it. There’s little hills everywhere he drilled & put adhesive. He used some kind of JB Wield. I’m going to follow your instructions & hopefully I can fix my floors myself. Thanks for the awesome video man!
Oh no! I’m sorry to hear what happened 😢 I hope you get your floor fixed with this method. Keep me updated on how it turned out, best of luck my friend 🙏🏽
Dude jb weld is extra strong adhesive used for sticking metal bits together. You should not have paid him sounds like he is a cowboy.
Wow! What a fantastic solution! Thank you for the great step-by-step!
Thank you so much! Glad I could
Be of help! 🙏🏽😊
That looks incredible, great work!!! I need to do this on my new floors in a few spots, so relieved I can copy this method, hopefully half as good as you.
Thank god for this video you’re a life saver
I’m glad I could be of help! 🙏🏽😊
Brilliant! Thank you for showing us how. This is an excellent video!
Thank you so much! 🙏🏽👍🏽
Wow! First time I see someone propose a solution to hollow plank spot wow
Thank you! 🙏🏽😊
Great info and solutions. One thing to note is that not all LVP/ laminate flooring can be slid apart at the end joints without damaging the locking mechanism. If your flooring is drop lock you will want to use the drill method shown in this video.
Thank you for sharing! 👍🏽😊
Great video on how to fix that situation. The best idea is to thoroughly inspect the base material for any potential gaps and level appropriately. Preparation work is the key.
These are some really great tips! Thank you! As a 35-year home improvement professional, it is my suspicion that the caulking that you used will have similar if not better adhesive properties than the wood glue would have (maybe better). The elastomeric properties you described for the caulk would not be applicable in a sandwiched 2-surface adhesion situation like this one. In other words, it will probably not allow movement of the flooring. The wood glue will bond to the subfloor, but it will probably de-bond from the vinyl backing of the flooring over time. Probably easier to inject also.
Hey Scooter, good point. I have a similar situation at my home- I did all the LVP myself so it's ultimately my fault for not perfectly leveling the floor. So is your ultimate take on this kind of fix to use wood glue, or would you try some other compressable liquid?
Any follow up answer to this?
@@ychongy the best way is to carry out an experiment with different materials - caulk, glue and foam and see how they behave once cured between 2 pieces of wood prior to injecting them under the flooring. Just use 2 scrap laminate or vinyl pieces to simulate the process and then make a decision from there.
For what it's worth, the Big Stretch Caulk advertises it stretches up to 500% once cured.
This is EXCELLENT!!! Clear. Simple. Well explained. Great video. Thank you!
Would this work if you had a underlayment pad under the floor?
Great video and super creative techniques. Thanks for sharing!
I’m glad I could be of help! 🙏🏽😊👍🏽
pro tip - use a shop vac and apply suction to the other hole. ;)
Nice! I’ll try that next time
Dude,I was skeptical at first but you won me over.
Thank you 🙏🏽! 😊👍🏽
We have learned some very important simple fixes! Thank you. Now how do you fix horizontal gaps? We have noticed shifting apart which implies we didn’t get the locking in place.
Stay tuned! I have a video on that coming out soon 👍🏽😊🙏🏽
Really great video. Have several bouncy areas on my laminate floor. Will follow the instructions here and confident it will work. Many thanks
Great instructional video, would you recommend using a suction device and slightly lifting unglued area while drilling the holes? May help to not drill into sub floor.
That will work too! 👍🏽😊
@@FixThisHouse thank you!
Thank you so much for this video!!! A hollow spot recently developed in a high traffic area and it drives me nuts! Can’t wait to try it. I have the exact same floors
I’m glad I can be of help! 🙏🏽😊
Overtime, will the vinyl adapt to the floor? I have a good amount of hallow space bc I failed to level the floor :(
Everyone I know has those Costco Puma socks. They rock.
Yessir! Love Costco! Thank you brother!🙏🏽😊
This one time, I installed lvp and noticed the floor had a low spot so I actually prepped the floor by skim coating the dip. 😮
Do it right the first time
100% proper awesome
mark the drill bit with marker or piece of tape so you don't drill too deep if your not experienced at this sort of thing this was good info for people even a non handy person could follow this and be successful
Thank you so much for the advice! And thank you for the kind comment! 🙏🏽😊
This was probably one of the most well done and informational diy videos I have found! Thank you for such a great and thorough explanation without any of the “fluff” some people feel like they need to add. I did NOT find myself thinking, “come on! Get to the point!” I appreciate that immensely! Nice job!
You’ve literally made my day! These inspirational comments like yours is what keeps me going as a RUclipsr and help me keep making content! Makes all the countless hours of making these videos worth it! Thank you so much! You are an inspiration! 🙏🏽😊😭
I ended up ordering a plastic long nose syringe. Worked better.. until I broke it. But the medal one was too narrow.
We just had an addition done to our home and contractor installed new luxury vinyl throughout the house. After it was all set and done I started noticing several hollow spots and it has been bothering me so much. I thought to rip it out and replace again but I will definitely give this a try. Thanks for the video 👍🏽
and how did it go?
@@K0d3x92 It did not work for me. I tried it several different times on extra flooring I had and you can see where I drilled the hole. Could be the style of vinyl flooring and the way the light shines but It would be really noticeable. Need to figure out another way.
@@MrAlperez77 I see. Well, thanks for the reply. I'll probably have to reconsider then, since it seems that without experience it will be hard to do properly...
Best way to fill these spots is to do the job correctly the first time.
Anthony that would cost extra 😂
Holy crap this dude is smart as hell.
I’m glad I could be of help! 🙏🏽😊
I will definitely give this a try! Do you have any spots that click when you step on them?
Yes I do, that’s due to the broken click system, I’ll make a video on how to fix that. Stay tuned 🙏🏽😊
@@FixThisHouse heck yes, can't wait!!
@@FixThisHouse can't wait for that video!
I don't have floating floor, but i always like learning new things. This is a great and easy fix
Thank you so much! 🙏🏽😊
It's not a fix. It's a problem caused by people not using self leveler to make sure your foundation is even. This is a temporary fix to a permanent problem. Not hard at all to level your floors before laying tiles. Please do not do this. It is a lazy, temporary fix caused by lazy prep work.
I tried this and drilled through a water pipe. after I left room I got a call saying The whole room was filled with water. It is now an indoor swimming pool and the value of the house has gone up by £45k
Great DIY tip... you may win for the year !
Thank you 🙏🏽!
Question for Fix This House: you published this video on Oct 31, 2021. Today is Nov 30, 2021. It's only one month later but would you comment or provide a follow up on how this repaired area is doing? I have encountered this exact scenario in your video; the flooring is over a concrete slab. Before I drill-and-fill, I'd like to know how yours has done. Thanks for the video.
Hi! Ofcourse! I’ll do a follow up video.
I can tell you it failed for me, lesson learned. I should have used some self leveler before putting down LVPF since its soo thin and doesnt hold up if the floor sags at all.
That repair was the best, I had an area that was bowing up but otherwise goof knowledge to have, thanks for the video
I’m glad I could be of help! 🙏🏽🙏🏽😊
theres a lot of idiots on here commenting "you should level the floor to begin with..." NO SH!T Captain Obvious! This is for people who already had their floors installed and didnt get it done properly.
You understood the assignment 👊🏽😊!
You are the smartest man alive!
🙏🏽😭 thank you, but I’m far from it
Awesome tip! Would you recommend the extreme stretch and big stretch for solid hardwood floor?
Thank you! Only if it’s a tongue and grove floating floor 👍🏽😊
@@FixThisHouse Got it!! Thank you!!!
wouldnt this fellier just pool on top of the moisture barrier/under layment?
Pro tip: properly floor prep the area before laying the floor and you won't have this problem
Absolutely! I always make sure floor is level if not add some leveling cement. So much easier if you get it at the start.
He did day this could happen with wooden subfloors during house settling or come from seasonal movement.
Great video: hey guys!!
We just did our floors and didn't have enough money to float them as they needed(correctly). So we have a 3' hollow spot, unfortunately.
anybody reading this anytime soon, I would love any repair suggestions for big spots like this. Thanks a lot.
Exactly what I needed to watch 💯 great method
I’m glad I could be of help!
Wow, great job smoothing the holes. Awesome tip.
I’m going to use this on the laminate tile in my bathroom this week :)
This is brilliant great job
Nice stair stepping on that installation whoever installed that floor they stair stepped it in a big way.
This guy is like the MacGyver of flooring fixes!
I love that show! Watched it while I was a kid! Thank you for the love! 😊🙏🏽
That soldering iron truck wirh the shavings is clutch my friend. Good work!
100% legit. I tried the window foam insulation and the DAP stretch. DAP is far superior, solid as a rock. Foam has a bit of give to it. I didnt use the suction to lift up so injecting DAP can be a pain and messy if your plunger is not flush with barrel all around. Tried and tested with 260 lbs.
Thank you! I’m glad I was able to help and it work led for you! 🙏🏽😊👍🏽
@@FixThisHouse thank you, sir! You saved me from a failed self leveling concrete that i didnt realize had drained below subfloor around bathtub. No more soft spots.
Such a simple solution. I'm going to try this. I like these easy fixes for my amateur hour house projects. Lol
Thank you for watching and your support! Wish you well on your project! 🙏🏽😊
You're more knowledgeable than the contractors that worked on my house. Thank you!
🙏🏽😊 thank you so much!
Best solution so far. Thank u. Been looking for this as i have exact problems on my vinyl plank lol.
I’m glad I could be of help! 🙏🏽😊