TLDW: The security screw has a 5-sided head and there is no screwdriver for it. Use a small, pointed tool to press on one of the five sides in order to slowly turn it this way. 5 minutes = saved.
Thank you so much for showing how to remove this dumb screw. I was happy with the controller until I had to take it apart. That is the dumbest single thing scuff could have done.
@@davidxontala9322 i had to use a little screwdriver i had, it was’t easy cuz the screwdriver wasn’t the one for this one but i did it pressing a little hardly. Use a little one if its possible and try to do it patiently slowly it took me 5-7 min. And i also damaged little the Nut but it works perfectly since then
yeah this doesnt work in 2022 the screw is tightened to the point where nothing works to losen it unless u have the correct Key. Never buying a SCUF again and wouldnt recommend anyone to buy one.
@@olumidecole970 both of u I recommend getting a battle beaver controller even of you fixed the scuf because the scuf will always bring problems no matter how much u take it apart and fix it
Damn just got a scuff and the pin on L2 fell inside trigger I can hear it and I’m to worried about attempting this I got it today lmfao so I’m going tos end it back
My screw is flatter and has proper holes on the circumferece. This looks to have a flat circle around and inner vertical slots on the head, more convex. There is no gap or "steps", just one surface on the head. That screw seems the one that Scuf (hugly company) used on Infinity. Remember also Scuf gives you 6 months warranty only in order to oblige you to ask for their repair service. Prices are from 20 to 80 € depending on the model and the damage. Exemple: Impact drifting, they change all inside asking 80 €, they don't change the stickblock only. They now you pad will last not much and they decided to add a source of income instead aim to your satisfaction after purchase
TLDW: The security screw has a 5-sided head and there is no screwdriver for it. Use a small, pointed tool to press on one of the five sides in order to slowly turn it this way.
5 minutes = saved.
Thank you so much for showing how to remove this dumb screw. I was happy with the controller until I had to take it apart. That is the dumbest single thing scuff could have done.
very true pretty sure they make it like this so you send it back and give them more money
Trank you man. In germany we say Ehrenmann 🙏🏼❤️
Ich mach das jetzt aber FR soo ein Ehrenmann
Bekomm das irgendwie nicht hin ☹️🚬
@@LUCAMAGPIZZA hast du es hinbekommen?
@@creativearts3385 Nein kaufe mir wahrscheinlich eine Pinzette oder eine Nagelschere damit soll es auch gehen 🤷🏼♂️
Yo wie heißt sowas hab mir sowas ähnliches bestellt funktioniert aber irgendwie nicht 🥲
I wish you all the best man thanks to you i fixed my L2 also godbless
How did you fix it? I have the same problem
@@davidxontala9322 i had to use a little screwdriver i had, it was’t easy cuz the screwdriver wasn’t the one for this one but i did it pressing a little hardly. Use a little one if its possible and try to do it patiently slowly it took me 5-7 min. And i also damaged little the Nut but it works perfectly since then
I used a tac and it worked. Took less than two minutes.
What's a tac? Can you link what you have?
@@chrismacho A pin
Omfg thank you so much I took bout 20 mins but worth it to fix the r2 trigger
thanks a lot!!! u save my life!!
yeah this doesnt work in 2022 the screw is tightened to the point where nothing works to losen it unless u have the correct Key. Never buying a SCUF again and wouldnt recommend anyone to buy one.
I actually stopped using scuff
Very thankful well explained
Awesome mate, thank you! Very clever
I have the same exact problem that just happened to me, did you figure out how to fix it yourself?
yes, i fixed it actually.
@@olumidecole970 both of u I recommend getting a battle beaver controller even of you fixed the scuf because the scuf will always bring problems no matter how much u take it apart and fix it
@@olumidecole970 how did you fix it. My L1 is also doing the same
Thank you very much that worked right away 👍 😊
Bro to fix that issue you just have to straighten up the long bit on the trigger that hits the button
“Im from street bruv”
Very helpful thank you
I have the same problem, how did u fix? What kind of "moves" you did with the screwdriver?
legend thank you
Damn just got a scuff and the pin on L2 fell inside trigger I can hear it and I’m to worried about attempting this I got it today lmfao so I’m going tos end it back
Where can i get the tool that Ican use to open the controller thumbstick and clean inside.?
Nice one I usually drill them out.
I used a pair of tweezerman tweazers
Thank you so much
Omg I have the same problem as you!
was it hard to fix it ? i have the same problem
worked
there is this liquid that can be used to make connection loosen up
With that screws did you use to open the scuf I have the same controller as you
I broke the little piece that goes to the joystick in accident can I just put a new one or what can I do
What’s the name of the tool you used to remove security Screw
It would be an awl.. an ice pick, or even dental tool or a construction nail sharpened like a toothpick🙂
My screw is flatter and has proper holes on the circumferece. This looks to have a flat circle around and inner vertical slots on the head, more convex.
There is no gap or "steps", just one surface on the head.
That screw seems the one that Scuf (hugly company) used on Infinity.
Remember also Scuf gives you 6 months warranty only in order to oblige you to ask for their repair service. Prices are from 20 to 80 € depending on the model and the damage.
Exemple: Impact drifting, they change all inside asking 80 €, they don't change the stickblock only.
They now you pad will last not much and they decided to add a source of income instead aim to your satisfaction after purchase
HOLY FUK DUDE U JUST PROVED THAT THE BIG MATH WORDS I LEARNED IN SCHOOL CAN BE USED IRL 😂😂
I just got an plastic screq
I’m from the streets 😂
Can you take it back if you take it apart?
Yes you can put it back together.
Took you 4 min to show how to unscrew the safty screw?
How did you fix the trigger tho?
I simply bend the hand of the trigger that goes back into the casing. But u have to be careful so you dont break it. Gently
i lovee you
my l2 the same after 5 month
Does anyone know the name of the screwdriver for the security screw?
It's called a point screw driver
i cant move my security screw can some1 help me
I had the exact same problem
im racist
Thank you so much