Y’all have become my go-to source of vehicle info. Thanks for uploading so many on such a wide range of different vehicles. I truely hope this series has been financially worth it. Y’all deserve all the love RUclips has to offer
+Bobby Rosken Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
3.6q Mobil 1 is the best wear resistance. 5w-30 weight. The 2.4 uses a timing chain that's lubricated by the engine oil, so dont run up the miles even if it's full synthetic. Change at 3k
Loosen the drain plug until it leaks you want to keep a good hold on it you may have to hold it and take it all the way out and then carefully thread it back in. Too much oil can force past or damage your piston rings. It may damage more depending on the car. It's gunna be messy though....
+MyChannel Thanks for checking us out! You can either tighten this down to snug and do another 1/4 turn or you can go about 20 ft/lbs or so. The oil will be specific to your vehicle and can be found in your owners manual for quantity and type of oil needed.
That's possible. You would have to put so much in that it actually blows the head gasket and begins to burn oil. 1aauto.com?RUclips&CTA%20Comment&ATony 866-403-3393
No need to get under the car. Just take off the passenger side front wheel and then take off the splash shield (right behind the wheel). The oil filter is right there.
Do you really need to take the wheel off or can you just remove the splash guard without taking the wheel off? I want to try to do this the easiest way possible. Thanks
After the repair, sometimes it will clear after 3 heat cycles, or after 80-100 miles. If it doesn't turn off, you may have to clear the code manually with a scanner. Hope this helps you out. 1aauto.com 866-403-3393
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Y’all have become my go-to source of vehicle info. Thanks for uploading so many on such a wide range of different vehicles. I truely hope this series has been financially worth it. Y’all deserve all the love RUclips has to offer
+Bobby Rosken Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
3.6q Mobil 1 is the best wear resistance. 5w-30 weight. The 2.4 uses a timing chain that's lubricated by the engine oil, so dont run up the miles even if it's full synthetic. Change at 3k
Super simple, super helpful!
What do I do if I overfill it just a little bit?
Loosen the drain plug until it leaks you want to keep a good hold on it you may have to hold it and take it all the way out and then carefully thread it back in. Too much oil can force past or damage your piston rings. It may damage more depending on the car. It's gunna be messy though....
A lot of help thanks so much
What type of oil ?
What about torque value for drain plug, gasket for drain plug, quantity oil and type oil? Any way thank you
+MyChannel Thanks for checking us out! You can either tighten this down to snug and do another 1/4 turn or you can go about 20 ft/lbs or so. The oil will be specific to your vehicle and can be found in your owners manual for quantity and type of oil needed.
Question: If one puts to much oil in vehicle, will the vehicle smoke heavily?
That's possible. You would have to put so much in that it actually blows the head gasket and begins to burn oil. 1aauto.com?RUclips&CTA%20Comment&ATony 866-403-3393
What is the proper oil to use on a Nissan Altima 1998?
It may say on the oil cap or your owners manual would state the recommended weight. Hope this helps you out. Thanks for watching. 1aauto.com
+Chris G It's always best to check your owner's manual or contact your dealer. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
would this apply to a 97 Nissan Altima
thank you
Thanks for checking us out. 1aauto.com +Reuben Ballyn
No need to get under the car. Just take off the passenger side front wheel and then take off the splash shield (right behind the wheel). The oil filter is right there.
+JSBPisgah Thanks for the feedback!
Do you really need to take the wheel off or can you just remove the splash guard without taking the wheel off? I want to try to do this the easiest way possible. Thanks
What is that sensor close to the oil filter. my wire is broken off there
+namniar79 It might be the oil pressure sensor
1A Auto Parts i wasn't sure but it's not throwing any codes! thx
how much of the bottle of oil should I put in?
+ILLEST KINGG Thank you for checking us out. Please refer to an owner's manual for the recommended oil capacity. 1aauto.com
The amount depends on the car we are talking about; for a 1.6L engine, it is usually around 3 - 3.2 quarters of engine oil. I hope that helped.
How do you reset the service light?
After the repair, sometimes it will clear after 3 heat cycles, or after 80-100 miles. If it doesn't turn off, you may have to clear the code manually with a scanner. Hope this helps you out. 1aauto.com 866-403-3393