'55 Ford F100 Body Mockup & Paint Prep - Truck Tech S3, E2
HTML-код
- Опубликовано: 29 июл 2019
- On this episode of Truck Tech the ’55 F100, Project Basket Case, is assembled and body worked for paint.
We'll continue to post these episodes here on RUclips. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/episode...
PARTS USED IN THIS EPISODE:
Single Source: Evercoat, Auto Body Filler, Rage, Gold, 3.0 Liters, Each
More Info: pntv.us/pn_pt_11993
Summit Racing: John Dow Industries, 2 WAY GAS CADDY 25 GALLON UL APPROVED
More Info: pntv.us/pn_pt_11996
Summit Racing: John Dow Industries, FUEL CHIEF POLY FUEL CART 25 GAL
More Info: pntv.us/pn_pt_11995
JW Rod Garage: 53-56 Ford truck frames are made of fully TIG-welded 10-gauge steel for strength and durability, Complete MII hub-to-hub kit with double adjustable coilover suspension upgrade, Parallel four bar kit, Universal panhard bar kit
Kimberly-Clark Professional: Scott Heavy Duty Shop Towels, BLUE, 60CT ROLL
LMC Truck: 49-9929-T - Ford - Hood Steel 1 REQ
LMC Truck: 48-1570 - Stepside Rear Roll Pan-W/LIC
Single Source: PPG-DPLF Epoxy Primer mixed 2:1, Gray, Gallon
Single Source: Evercoat Slick Sand Polyester Primer Surfacer - Gray
The Industrial Depot: The Industrial Depot - Fasteners, Hardware, and Shop Supplies 
Авто/Мото
We'll continue to post these episodes here on RUclips. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/shows/truck-tech
Love you baby ❤😊👍
Are there going to be new episodes? Are you thinking of doing a payment channel kind of like Steven Crowder? I do miss your shows on Sundays.
don't take a lifetime ....but it takes a lifetime of money
No
Queoaai
I really appreciate that you guys wear proper respirators when doing dusty work. That's so important, and so often neglected.
18:05 Pulls up till there is tension on the Scott towel then lifts. Aggressively yanks up on the other towel before any tension and rips the ends off. Yep, he did exactly what the manufacturer of the Scott towels said to do to make their towel look so tough in order to get that sponsorship! I imagine if he lifted the other towel till there was some tension, it would've managed to lift the hub assembly before it tore. Even though the other towel is clearly not as tough as the Scott towel, it was not a fair comparison based on inconsistent test factors.
I wonder what would have happened if it was a lunar rover part on the moon?
Its like restoring the soul of the vehicle.
These guys are a good duo. I like watchin these shows
A lot of trucks like I had sit a long time because of money and equipment. Your shop has the equipment, shop, manpower and money to get the job done. It takes years for individuals to get enough money and find competent bodymen and mechanics.
My dream truck,great job..!
Great build.
im so in love that truck guys...😍😍😍
In France y love it the fleap sead the truk is look the beautiful style good cars yeee
Not a ford guy but you NEED a good ole 56 F100. Awesome looking truck
Nice shop good project. Good job guys
13:04 back it with brass or copper and blast away. Holds the molten till it hardens. It's like a no stick mold. Less goober on the backside too.
Waw amazing, beautiful car👍👍👍👍😁
You've got to respect body men. That's long tedious work that is easy to mess up. Results like this are impressive.
A very well put together informative video, you guys got it together . I have the exact same truck. It took 20 yrs to finish on my own. I restored several other cars as well. Keep them coming.
Nice
Better than 2019 models any day
Excelente trabajo. Una pena que no tenga traduccion en español. Saludos desde Rep. Argentina!!!
Nice... 👍👍👍
:’op
Nice classic car...
Cool
New sub!
That’s the kind of truck I would love to have 1 day.👍👍👍put a shelby engine in it. Wow awesome
I mean I could do that but I would just keep its factory engine
Son lo máximo lopinta de Perú
Beautiful video and hello from Puerto Rico 🇵🇷
Omg all that sanding would drive me nuts. Lol
nice
wow I remember this episode when it was actually on TV 3 years ago
The shop towel put, you pulled quick on cheap towel than the other ..
I had one of these years ago. And it was a joy to work on. But I did a big no-no. I ran a 454 Chey big block. I guess you could say it was "built ford tough" with Chevy stuff...lol
TINY Numismatics at least it’ll have more horsepower than that old flat head Haha
@@automotiveguru6961 It came with a 302 in it someone had put in it. It had a big old hole in the block. And with no ford motors around I went with what I had...
TINY Numismatics Well gotta do what you gotta do lol Chevy V8s are the easiest to work on other than a ford or Mopar V8
You fitted a 55 can onto a brand new vehicle...harldy a resto or rebuild! Looks good though, just wish these shows actually restored more of the original parts.
You can use filler over e coat when prepped properly. we never fill over bare metal. epoxy is the best to use filler over
Why do people fill in the cowl vents?? It's one of the coolest things on these trucks.
👍👍
My fan !!!!!iiiii?
How come you didn't paint the chassis while you had everything off?
fery2 good...👍👍👍👍job
What kind of welding machine did you used to tack the holes
Fat fendered Ford baby yeah....Hate Fords but I love these 😊
Cual es el costo de esa hermosa camioneta puesta en New York
I absolutely love the content of the guys! Why is it exactly though that the narrator uses that silly, contrived MMA voice affectation to do the intros?
I have the same truck, gonna sell it, in TX
Oh!oh!oh! Sogood?
11:39 Camera needs to be bagged in the booth. Hope it was a rental.
I am no paint expert so I am gonna ask a possibly stupid question. Why would you use body filler on perfectly good brand new body panels? I understand removing that black factory coating but I thought you should try to use NO filler everywhere possible.
You ever heard of Foose? Skim coats filler on every winning ride.
See above and below...
I have a 56 Ford truck f 100
Can’t find rear Alex stop ( rear)
Frame has 2 holes 3 7/8 inch center s thanks
Of all the reliable New Ford V8 motors they use a V6
The EcoBoost V6 is an extremely reliable engine that makes great power and has a huge aftermarket. There are guys making over 1,000 hp on an EcoBoost and they are surprisingly reliable.
How many hrs in the body and paint work?
👍👍👍👍👍🇨🇿
Please show all shops names for others
Karman ghia
😁👍✌👌🖖😎
Why not use copper plate or even a penny to Fill your trim holes?
19:13. He closed the door.
How to open it?
never cared for shaved door handles ,,,or lowered ,,,or chopped or changing out original steering wheel or replacing bench seat with bucket seats from a van.
filler equals poorly done metal work and when filling them holes with weld are the holes ground from both sides
ok.
Did they ever finish this truck
Yeah, www.powernationtv.com/episode/TT2016-23/f100-finale
You got new fenders and hood, and why you aply body filler?
The metal comes with waves and imperfections. To make a "show" truck lines must be super straight. Think of filler as a thousand layers of primer in one hit. Then block it till it is flat. Then seal and paint and glass and candy apples.
badad0166 working on a ‘56 currently. Been doing this since the early ‘70’s. Bought the same panels from LMC. Removed the e-coat. PPG epoxy prime followed by 2K . Block sanded, flat as hillary’s ass. No filler required. Misinformation and bullshit.
Nice project! But this is basically a advertisement show!
install ad block plus
Why do you sand it down an put bondo on it
Thru Itall I have the same question too. They didn’t explain why
The metal comes with waves and imperfections. To make a "show" truck lines must be super straight. Think of filler as a thousand layers of primer in one hit. Then block it till it is flat. Then seal and paint and glass and candy apples. It's very much sculpting.
So much for straight panels lots of bog ha ha
" if the bolt do sen't go in get a bigger impact " very bad advice ...
The only thing original is the VIN number.
Yes, excellent, gonna be a beautiful, unbelievable truck, but to call it a F100 is laughable other than the body. All these Restomods need to have an "asterisks" that these cars/trucks are in name only.
Seriously.... a V6???
That things gonna sound like a fart machine driving by.
Yea trash they can't afford a V8
The EcoBoost actually sound quite good, believe it or not V8's aren't the only singular engine design that can sound good.
A top chop looks good on some vehicles...but not on 53-56 F-100s. It makes the truck look longer and destroys the proportions. A good example of a stock vehicle that looks like it was flipped over and slammed on it's roof is the newest Camaro. It has ugly proportions.
The trucks look one hundred percent better cut down four and a half inches as I did mine I installed the body on LTD frame with a 46o engine 😎
@@davidgraham7325 Cutting it down makes it look longer and ruins the proportions of the hood, fenders and box /rear fenders...in my opinion of course. You can see this ruinous effect in the newer Camaro of the last five years or so...it looks like someone rolled it and pancaked the roof.
Holy filler
Hi my David I need help with my F-100 can you help me please
Too many screws..., why not welding?
14:19 what a shitty weld
tail lights are dumb and should of never lowered it,, and please tell me you didnt shave the door handles
To many talk,i cant understand
Perfect way to kill a vehicles look put ugly black rims on it
V6? Turbo? Im outa here
Wish I had 45K in free parts to build a ''Basket case" LAME!!! Oh and it sits 6'' too high!!
Why do you bondo brand new panels pretty stupid.
The metal comes with waves and imperfections. To make a "show" truck lines must be super straight. Think of filler as a thousand layers of primer in one hit. Then block it till it is flat. Then seal and paint and twelve coats of clear, sanded and polished to a mirror finish and best in show here's your trophy. For those of you reading this for the third time, congratulations and please take a complimentary cookie.
Great work, ugly truck - doubtful if anything will make it look good!
Ford trucks have always had the best looking bodies that is one reason they have always outsold every thing else for 50 years
I was excited this build until ya'll put the 6cyl in it that's when I quit watching
Why not just take your money and buy a new car? I'm a purist why ruin a good thing?