Fiesta ST CATBACK EXHAUST INSTALL
HTML-код
- Опубликовано: 19 янв 2025
- Skip Over the Review: 01:43 Install Portion
Hey everyone!
This is my review & install video for Milltek's US Spec Race Catback Exhaust system...WITHOUT cutting the stock exhaust.
If you want to hear the sound comparison between the stock exhaust and the new exhaust, then please feel free to view this video: • Fiesta ST Milltek US S...
Hope this video helps!
As always, feel free to like, comment and subscribe to my channel, as well as follow me on Instagram: @shadow_f1st , to keep up to date with my adventures with the Fiesta!!
Disclaimer:
Due to factors beyond the control of HappyHill's Cars & Stuff, I cannot guarantee against improper use or unauthorized modifications of this information. HappyHill's Cars & Stuff assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. HappyHill's Cars & Stuff recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of HappyHill's Cars & Stuff, no information contained in this video, or comment section, shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from information contained in this video, or comments, is the sole responsibility of the user and not HappyHill's Cars & Stuff.
This is the only detailed ST180 exhaust vid on RUclips, good job broo
Thanks brotha! Appreciate that haha. Just took a look at your channel and the the content is awesome! Keep it up
Mental it is the only one well done chap
@@alexeibates7826 appreciate it!
This is arguably the most detailed exhaust video I've seen period (as someone who's had a few different bolt on style vehicles)
Great video to the point, I still feel like I'll be cutting the old exhaust just for time and ease sake as well but great to know the entire way to remove the exhaust is there
Appreciate that!! 🤙
just got my new exhaust in the mail today and im gonna be putting it on this weekend, definitely will be having this video going the entire time
Good luck on the install!!
Gonna be doing this install this weekend. This video will be a big help!
Awesome! Glad it can help 👍
Hey nice vid, im going to fit my fiesta a 3inch cobra exhaust. but can i run it without exhaust leaking with a stock gasket on the stock downpipe? Going to fit a decat later. or do i need to use sealant and stuf?
Thank you! And I did not have a problem with my stock gasket, however my exhaust system is a 2.75. So I don't know if the extra .25 will make a difference in that area.
hello, how much is the diameter of the original cat back?
If I remember right, 2.5"
Did you buy a new gasket when fitting back from the down pipe? thats fitting the new 2.75" to the stock 2.5" flange i couldn't see if the stock one was still on there? Thanks
I reused the stock gasket when I put this on. When I changed the Downpipe out I used a new gasket though.
The gasket was still on the downpipe in the video, so it may have looked like I didn't put a gasket on lol.
@@happyhills_garage Great thx, ill be fitting mine today at my dads so hopefully goes okay, this video has been a great help! 👍 Ive gone with the carbon fibre tips on mine 🤩
@@amykitching1438 awesome! Glad it helps 😁 carbon fiber tips should look clean 👌
Hi mate, I’m going to be installing mine tomorrow, is the only reason you dropped everything just so you didn’t have to cut the old exhaust? If possible I’d rather cut the old exhaust than drop everything, also have you got any other tips? Or is it as easy as you make it look haha
I didn't cut it mainly because if I ever wanted to sell it, I would just swap the catback with the old one. Easy day. If you don't really care about that than feel free and get cutting lol. It isn't hard once you know the way of working it out, and not really any other tips other than what I stated in the video.
Are all the tools required and why? Also would it be a viable option to just saw the stock exhaust off rather than messing about with brake cables and stufd
If you are not planning to keep the stock exhaust to put it back on later, for whatever reason, then just saw it lol. All based on what you plan on doing.
@@happyhills_garage Alright mate and what other tools are 100% required for the job?
@@adamday9632 everything but the pliers and 5/16". The 13/15 mm are for the catback to downpipe, it may be different for whatever system you have
@@happyhills_garage Alright that’s calm gonna fit the milltek in a few months
@@adamday9632 sounds good! Lemme know how that goes 👍
Lmao why are you removing brake lines and suspension parts for literally no apparent reason? It’s literally just an exhaust install
You are correct, it is an exhaust install 👏