⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/channel/UCk_lcDzEWLs5fVRYceK3-9Q ⛐ Link to donate: gf.me/u/y59hvn
@@tammex08 I used a long heavy-duty pry bar to extend the lever arm. In this case, you don’t need a hammer. I guess it’s not possible with a screwdriver (as shown in the video) if the CV axle has not been removed for a long time.
good job, it's a lot easier to remove the CV axle nut with the wheel on before jacking up the car. I just pull the center cap off the wheel than loosen the nut with breaker bar and long pipe..
Hello, I have been having the steering wheel vibration problem for a while. Replaced the Wheels, Tires, Struts, Sway Bar Links and now the CV Shaft on the driver side. I still have a vibration.. I did have the car alligned after I replaced the wheels and struts. Do I need to have it re-alligned after the CV Shaft replacement?
I have dificulty to find parts for KIA and the information about it. Number , OEM codes etc. in this moment I neet to chang my Front Axle right (Driver UK side)
It's kinda weird that this guy is using SAE sockets since he's obviously not American or even a native English speaker. The 1 1/4 inch socket is actually a 32mm.
@@Whatsgoinonhere He probably had a har time getting it out and once he did he put it back and pulled it out easily, only editing the easy part in. Hate when people do that but I don't think it's supposed to pop out that easy. I could be wrong tho
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos:
ruclips.net/channel/UCk_lcDzEWLs5fVRYceK3-9Q
⛐ Link to donate: gf.me/u/y59hvn
These guys have single handily taught me how to fix everything on my optima lol
No doubt, I have a 2007 that is at that point where if I look at it sideways something breaks and these videos have been life savers
Great video. Your English is great and the Russian accent (or nearby area) made it fun for us Westerners to hear! Excellent video. Thank you.
Thank you so much for your amazing video. I have a KIA optima 2016, and following your guidelines I changed the CV axle myself.
Dude how? I have a 2017 and I'm having a very hard time removing it from the transmission. Any tips?
@@tammex08 I used a long heavy-duty pry bar to extend the lever arm. In this case, you don’t need a hammer.
I guess it’s not possible with a screwdriver (as shown in the video) if the CV axle has not been removed for a long time.
good job, it's a lot easier to remove the CV axle nut with the wheel on before jacking up the car. I just pull the center cap off the wheel than loosen the nut with breaker bar and long pipe..
I was wondering who could mash the brakes for me if this is a solo job...I will try this out tomorrow.
Thank you very much, seems I am always getting too much charged, so with ur help,I will save some money 💰
Is it harder or easier to change the front passenger side axle?
I cant find a video on it
I really like your videos and appreciate that you make them, but can you please make chapters so I can skip the into.
Hello, I have been having the steering wheel vibration problem for a while. Replaced the Wheels, Tires, Struts, Sway Bar Links and now the CV Shaft on the driver side. I still have a vibration.. I did have the car alligned after I replaced the wheels and struts. Do I need to have it re-alligned after the CV Shaft replacement?
Check for wheel bearings as well
Is there a spacer between the cv axle and the bearing
2012 Optima SX, does it leak fluid when axel removed. And if so, where’s the fill hole
Which models need to be drained before removing the cv axel I have a 2015 kia optima sx turbo am I OK are should I drain it first
??
What is the torque spec for the cv axle nut?😊
Great video. Thank you
Can anybody point me out to video that helps with passenger side cv axle.
I’m struggling with this as we’ll.
Tanks yaALI
I have dificulty to find parts for KIA and the information about it. Number , OEM codes etc. in this moment I neet to chang my Front Axle right (Driver UK side)
Rock Auto has them all and great prices.
It's kinda weird that this guy is using SAE sockets since he's obviously not American or even a native English speaker. The 1 1/4 inch socket is actually a 32mm.
Some kets come with both, but I see what you're saying lol
True
Mines stuck af
Is it really that easy? Lmao, could have done this forever ago....wont have all the tools i need cuz i borrow alot at work but pretty simple job.
Mines reallllly stuck in there his popped out nicely
@@Whatsgoinonhere
He probably had a har time getting it out and once he did he put it back and pulled it out easily, only editing the easy part in. Hate when people do that but I don't think it's supposed to pop out that easy. I could be wrong tho
he had to edit that cuz i just did a job today could not get it out
@@Whatsgoinonhere
do a 2014 2.0 passenger side lol :((