Sublimation Paper: What's Best, What's Worst, and Why Paper Weight Matters!

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 305

  • @deadringer-cultofdeathratt8813
    @deadringer-cultofdeathratt8813 Год назад +13

    You’re the only craft person who I willingly watch 30+ minutes videos. These videos are excellent.

    • @JenniferMaker
      @JenniferMaker  Год назад +1

      Thank you so much for watching! I really appreciate you!😊🌻

    • @alycris6815
      @alycris6815 10 месяцев назад

      Same. I love how she explains everything

  • @michelebooker6826
    @michelebooker6826 Год назад +2

    You are the best. Love how you really go into detail about questions I don’t even know to ask.

    • @JenniferMaker
      @JenniferMaker  Год назад

      I'm so glad you find the videos helpful! 💗

  • @Cee_Cee8
    @Cee_Cee8 Год назад +1

    This question crossed my mind today, ive been using infusible ink sheets with my cricut mug press.I ordered my sawgrass sg500 last night and it's due to arrive tomorrow or friday.
    I jumped on amazon to order my sublimation paper via prime and realised omg there are so many brands 🤯
    As usual, this channel has and continues to answers all the craft questions I've faced along my journey....Great content. Thank you 🙏

    • @JenniferMaker
      @JenniferMaker  Год назад

      I'm so glad you found some answers here!! Yay!🥰

    • @celestinoprien3387
      @celestinoprien3387 11 месяцев назад

      My sawgrass prints looks so much more vibrant then on a sub does it look more vibrant on the tumblers?

  • @3btucson
    @3btucson 2 года назад +1

    Definitely going to try this, I always stayed away because I wasn't sure how to do it and hae it look good. Thanks for all the tips, you make it so simple and clear💖

  • @bobbiobriendesigns
    @bobbiobriendesigns 2 года назад +2

    Thank you so much for explaining the difference between the different A Sub papers. I’ve been sublimating for 2 years now, and I’ve only ever used A Sub, was just lucky enough to have stumbled upon the best to start with, I once tried another only to be disappointed and went right back, but couldn’t never figure out why there was more than one kind. Thanks!!

  • @peggysunday409
    @peggysunday409 2 года назад +1

    I have been following you since the beginning of the pandemic when you shared your face mask patterns. You are an amazing inspiration, teacher and artist. I am so appreciative of you and your generosity. Love your tips and templates. Thank you for all you do.

  • @celiahansen667
    @celiahansen667 2 года назад +1

    Sublimation has changed a lot in 15 years! Thank you for everything. I am loving this!!

  • @lisanyijimenez1147
    @lisanyijimenez1147 5 месяцев назад

    I've been binge watching your channel ever since I found it yesterday. It's amazing work you're doing here ❤ really appreciate it.

  • @Ccp215
    @Ccp215 2 года назад +1

    I used my epson printer and bought a cissy system for it works perfect. Keep up the good work.

  • @karenlangdon5564
    @karenlangdon5564 2 года назад

    Jennifer,
    You do a wonderful job explaining the directions and what to avoid!
    Thanks!

  • @rebeccagiffels1212
    @rebeccagiffels1212 2 года назад +2

    Missed the live, but I do home care and my patients just loved to decorate some of the houses I learned to do last night! Thank you so much!!

  • @kathymatthews4786
    @kathymatthews4786 2 года назад +1

    I so appreciate the replays. I've been ill since this started, so I'm getting up late, but not missing out! Thank you!

  • @odeeroberts371
    @odeeroberts371 2 года назад +2

    Thank you Jennifer for your generosity in sharing what you know!

  • @fiesty515
    @fiesty515 2 года назад +1

    I love the door mats you made ,i am just getting into sublimation and am waiting on a few more items and i am all set to go , love what you do for us crafters and i have learned a lot from watching your videoes .thank you Jennifer

  • @karengates7154
    @karengates7154 2 года назад

    Being still new to all the things that my Cricut can do, I had no idea there were differences. Thanks so much for the information.

  • @shays4621
    @shays4621 2 года назад

    This was truly informational for me! Researching for a while before getting a sublimation printer and heat press.

  • @emmaskraftkreations
    @emmaskraftkreations 2 года назад

    In terms of rear paper feed printers, the blank white side sits facing the front and the printed side of the paper to the back.
    Very useful video. Thank you ❤

  • @renehouchin4627
    @renehouchin4627 2 года назад

    I love watching your videos, you have saved my life in the cricut world! So much help, thank you 😊

  • @elizabethwhite3483
    @elizabethwhite3483 2 года назад

    This may be the magic tutorial that will cure my perplexed printer! Right now it thinks it's a toaster, and every time I try to print, it starts yelling, "JAM!" Now I see that the poor thing probably can only handle 105, which I didn't even know was a thing to look for! Thank you sweet crafty teacher! At one point, I saw a setting in my advanced print options for heavy paper/envelopes, but for the life of me can't find it now. I do wonder if that would help with the Epson-heavy paper issues. I'll spend the next 3 hours looking for it so I can find out, rest assured.

  • @marialovescrafting3190
    @marialovescrafting3190 2 года назад +1

    I love watching your creativeness. Thank you for sharing your creativity!

  • @sharibritton
    @sharibritton 11 месяцев назад

    Thank you for the test and showing the differences in sub papers. This helped so much. Appreciate the tutorial.

  • @viviennegordon6321
    @viviennegordon6321 2 года назад +1

    Hello Jennifer look the wonderful mats. Thanks again for teaching us. Blessings!

  • @marcybottorff8381
    @marcybottorff8381 2 года назад +3

    Love all you do. Thanks for all the free patterns.

  • @marinavitale8803
    @marinavitale8803 2 года назад +1

    Love sublimation.I definitely learned so much from your sublimation Course.

  • @kathrynbaker5371
    @kathrynbaker5371 2 года назад

    I love the way you explain everything in detail.

  • @sabrinamuckridge7355
    @sabrinamuckridge7355 2 года назад +2

    Have yet to be able to catch live, so very thankful for the playbacks. I need all the cricut help I can get! Lol😂 Want to make all the things!!!

  • @wendysoward7936
    @wendysoward7936 2 года назад

    I am such a huge fan of yours, Jennifer, from Nova Scotia, Canada!!!!

  • @annie68ish
    @annie68ish 2 года назад

    I missed it😢I thought it was at seven tonight. Congrats to anyone who won, Hello Jennifer. I’ll make sure I’m here on time tomorrow

  • @kathymatthews4786
    @kathymatthews4786 2 года назад +1

    The tiny replicas are so cute!

  • @anndunphy7264
    @anndunphy7264 2 года назад

    Enjoying each tutorial - thanks Jennifer!

  • @buffydiebold5124
    @buffydiebold5124 2 года назад

    I love watching your creativeness.

  • @gailmiller5327
    @gailmiller5327 Год назад

    Thanks, love my A-sub 125. Not used the 105, but it did well also.

  • @KarenRomero-n8t
    @KarenRomero-n8t 10 месяцев назад +1

    Hello, I've been watching your videos. I do have an important question about after the design is applied to a mug, I noticed that the design will fade pretty quickly and I use ceramic mugs and Cricut's mug press and quality subliminal paper that you use. Is there a more professional technique that I am unaware of, please help.

    • @JenniferMaker
      @JenniferMaker  10 месяцев назад

      The mugs need to be sublimation banks. It has to be poly coated to sublimate on. jennifermaker.com/cricut-mug-press-ultimate-guide/

  • @marsharice583
    @marsharice583 2 года назад +1

    I love your clear, concise explanations! You are a gifted teacher!! 💞
    I’m totally following all your recommendations!
    In choosing paper size, if the screen is 8 1/2 x 13, would you ever use paper that is 8 1/2 x 14, thereby wasting an inch?
    Or should my paper size be 8 1/2 x 11?
    I will be doing Duufin MDF rectangular keychains… 4 cm x 6 cm
    I figure I can put 9 on a page of the smaller,
    12 on the legal size, if not too close!
    Haven’t researched that yet either…
    Still buying supplies.
    I really NEEDED this video!
    Thank you! 💞
    Your thoughts on which weight for MDF?

    • @JenniferMaker
      @JenniferMaker  2 года назад

      Thank you so much! Check out some of our other sublimation videos we have lots of tips for you. 😊🌻

  • @1gurugraphics
    @1gurugraphics 2 месяца назад

    Very good information & video. Thanks 👍😊

  • @wendyvalerie6624
    @wendyvalerie6624 Год назад +1

    Very informative video. Calm voice and a ton of help. I'm waiting for my sublimation printer can't understant why I can't make a tee shirt 100 cotton.

    • @JenniferMaker
      @JenniferMaker  Год назад +1

      Sublimation ink doesn't bond with natural materials. Blends are fine as long as the fabric is at least 65% polyester. 😊🌻

    • @wendyvalerie6624
      @wendyvalerie6624 Год назад

      @@JenniferMaker thank you

  • @johnniecarroll8623
    @johnniecarroll8623 2 года назад

    I am so excited. I seen the sunflower I made from you on the crafts you were showing. Happy happy

  • @susanallison4118
    @susanallison4118 2 месяца назад

    I have the brother sublimation printer which will work best with it thanks thanks for the great videos

    • @JenniferMaker
      @JenniferMaker  2 месяца назад

      Generally, you should look for sublimation paper that is recommended for use with Brother printers. You might want to check the printer's manual or the manufacturer's website for specific recommendations.

  • @tracireich6287
    @tracireich6287 2 года назад +2

    You're a great crafting inspiration - Thank you!

  • @Creole_marmalade
    @Creole_marmalade 2 года назад +1

    Congratulations Joshua

  • @KraftyNana
    @KraftyNana Год назад

    Hi Jennifer. I love your teachings, they are very detailed and easy to understand and follow. My I make a suggestion, why not have a search open in your library so we can just type in a keyword like "Subler Flower". I have been trying to locate the sublerflower but you have so much info in there that it made it impossible to find your flower.

    • @JenniferMaker
      @JenniferMaker  Год назад

      Hi there! I do have a search bar on my blog, jennifermaker.com. Just type in Subliflower and it will pop up

  • @marymize9797
    @marymize9797 2 года назад +1

    I am watching replay! I love your video’s!

  • @barspen48
    @barspen48 2 года назад

    I loved them last year and I love them this year.

  • @MsCraftlife
    @MsCraftlife 2 года назад

    i have never tried sublimation techn ique.... someday soon i will watch tones of your videos on it... and have a go at it😃

  • @christinecielien8925
    @christinecielien8925 2 года назад

    Another great, informative tutorial. Thank you. ❤

  • @MrKeithcl
    @MrKeithcl 2 года назад +1

    I missed the live again today but I was cleaning my craft room to get ready for all the Merry Mingle crafts 🤣

  • @cyaneablue9984
    @cyaneablue9984 Год назад

    Hi Jennifer! Thank you for all the wonderful information! Just getting started with this amazing process. I’m intending to sublimate on larger scuba knit sheets (84% polyester, 16% spandex). Can I use a washable spray adhesive instead of the heat tape to keep the sublimation transfer from shifting?❤

    • @JenniferMaker
      @JenniferMaker  Год назад

      I would suggest using sublimation tack spray 🥰

  • @patbushnell6621
    @patbushnell6621 2 года назад

    Very helpful information!!!! Love it!!!❤

  • @neonninja5049
    @neonninja5049 7 месяцев назад

    You are very good 👍I’m making mugs but I’ve had different results from my mugs and I would like to know a recipe to heat time and pressure standards I understand it’s 400 for 2 to 3 minutes and set the temperature set to 200 to start but there are so many variables with mugs or paper. Im trying to make a clean video and full proof standard for working. And preparation for mugs tape is it better to use less tape with silicone wraps.

    • @JenniferMaker
      @JenniferMaker  7 месяцев назад

      Thank you! 😃🥰

    • @neonninja5049
      @neonninja5049 7 месяцев назад

      Your correct 👍 eco was very thick I’ll try 105g for my mugs soon best mugs would be help full.

    • @neonninja5049
      @neonninja5049 7 месяцев назад

      @@JenniferMaker your very welcome 🙏 thank you for sharing your experience.

  • @bfcecill
    @bfcecill Месяц назад +1

    What weight of paper do you recommend for Chroma Luxe Hardboard?

    • @JenniferMaker
      @JenniferMaker  Месяц назад

      I like the A Sub 125g for most surfaces. 😊🌻

  • @sharnamekiacolon4639
    @sharnamekiacolon4639 Год назад

    Thank you so much for showing that you're doing for the individual as myself!🦋
    I have followed the steps as shown, for some odd particular reason, my images are not getting on to the mouse pad or cotton fabric; is there anything that you could think of that I am doing incorrect please?!? Please Help!

    • @JenniferMaker
      @JenniferMaker  Год назад +1

      Sublimation needs a high polyester count to work well. jennifermaker.com/sublimation-for-beginners/ Here are some work arounds for cotton. jennifermaker.com/how-to-sublimate-on-cotton/

    • @sharnamekiacolon4639
      @sharnamekiacolon4639 Год назад

      Thank you so much for responding! I've watched your videos before starting! Everything prints beautifully on A-Sub papers but nothing appears on the shirts or mugs! Thank you so much Ms. Jennifer! 🦋

  • @Gail1124
    @Gail1124 2 года назад

    I love the mat that is changeable..that's great!!

  • @carissa4110
    @carissa4110 Год назад

    Thank you for this informative video. I watch your videos before I start a new project because you offer great advice. I hope you can offer some advice about the A-Sub 125 paper. I'm having trouble with it sticking to the light grip blue mat and completely ruining my design. It has happened almost every time I've tried, no matter what I do to try to prevent it. It could be a large image with very little detail down to a fine cut with many details; using the brayer or not using the brayer; reverse weeding (or attempted to) and with or without transfer tape. I'm about to try the light grip mat with lint pressed into the mat to see if that makes a difference. Please help!

  • @velmaf4572
    @velmaf4572 4 месяца назад

    Hello Jennifer, How are you. I hope everything is good, my question is if I were to purchase the Brother sublimation printer can this printer be used without purchasing the artspira app.

    • @JenniferMaker
      @JenniferMaker  4 месяца назад

      Yes, you can use the Brother sublimation printer without purchasing the Artspira app. The Artspira app is designed to help with designing and managing your sublimation projects, but it’s not a mandatory component for using the printer.❤️

  • @HueyDzeNgo
    @HueyDzeNgo 10 месяцев назад

    Hi Jennifer, I have 100gsm sublimation paper. Is this sufficient to do DIY car freshies? I am new to this :)
    Thanks! And your tutorials are awesome!!!

    • @JenniferMaker
      @JenniferMaker  10 месяцев назад

      That may be a bit thin but you can test it for yourself.

  • @deborahheller6479
    @deborahheller6479 2 года назад

    Thank you for the tutorials! It’s so appreciated!

  • @janetsnitzer7090
    @janetsnitzer7090 11 месяцев назад

    Will the 125 and 120 be ok for tumblers? I want vibrancy 😊 ty

  • @joefox2508
    @joefox2508 Год назад

    I am new to sublimation and your videos have provided a ton of help. Thank you. I am printing larger graphics on Asub 130G 13x19 paper and every time, it comes out with smears. If I reduce the size like 2 inches and change to a smaller print and use my Sawgrass Truepix 8.5x11 paper, it prints fine every time. Any idea what might cause that? Thanks again for what you are doing!

  • @michelletaunton4307
    @michelletaunton4307 11 месяцев назад

    Have you had issues with the "coating" chipping off of the sublimation paper, causing a white spot once it's printed? I've looked at several sheets of my A-sub eco straight from the package and wondered why I was getting occasional white spots. When placed on a light box the blank, unused paper shows these spots on nearly every sheet. Since I am putting on aluminum it really shows up.

    • @JenniferMaker
      @JenniferMaker  11 месяцев назад

      I have not encountered that. You can ask in the group. facebook.com/groups/sublimationmadeeasy

  • @jerreldahl9647
    @jerreldahl9647 Год назад

    Hi Jennifer I love your video's
    I want to ask if I can use sublimation paper on the HP PLOTTER PRINTER T210
    Thank you

    • @JenniferMaker
      @JenniferMaker  Год назад

      I'm not familiar with that printer but if you are able to, you would need sublimation ink. You can always ask in my Sublimation FB Group as well, facebook.com/groups/sublimationmadeeasy 💗

    • @jerreldahl9647
      @jerreldahl9647 Год назад

      Thank you

  • @marycostello7306
    @marycostello7306 2 года назад +1

    Your shoes truly are super cute! 😊

  • @melissamcdonald7180
    @melissamcdonald7180 2 года назад

    Thank you for all the tutorials.

  • @marymize9797
    @marymize9797 2 года назад

    I am watching replay! Love your video’s!

  • @donnyboy911
    @donnyboy911 Год назад

    awesome info... i have et-2760.. and a-sub 125. what paper choice do i use in the advanced drop down window ..you kinda went past that...been using premium matte...but nobody seems to explain the ink load dif between any of these settings...LOL

  • @jodigrendys5943
    @jodigrendys5943 2 года назад

    You are an amazing teacher! Thank You!

  • @randykramer3715
    @randykramer3715 2 года назад +1

    I need a sublimation printer, love the doormats!

  • @jenniferbrunetti2009
    @jenniferbrunetti2009 2 года назад

    I love your channel, love the homemade part of it...

  • @ethelguayasamin6231
    @ethelguayasamin6231 2 года назад +1

    I love your videos. So inspiring.

  • @jennellechapa2444
    @jennellechapa2444 2 года назад

    you are such an inspiration thank you for sharing all your great work

  • @twistednerd23
    @twistednerd23 2 года назад +1

    Watching reply.
    Too early in in the am for me in Australia 😍

  • @DewyCreations
    @DewyCreations Год назад

    Hello Jennifer, thanks for this great video! I just got my new pack of A-Sub 125gr paper (becuase of your recommendation). Which paper settings do you use on the print manager of the Sawgrass for this? I don't see an option for "A-Sub" on mine...

  • @designsbydawn976
    @designsbydawn976 2 года назад

    Your tutorial was awesome. Can you use cardstock paper in place of butcher paper on top? Tfs and God Bless 🥰💜

  • @snstbeach7775
    @snstbeach7775 2 месяца назад

    I am finding the cup to be too hot when trying to remove paper & tape. Can I wait for it to cool a bit before removing it or is that not recommended?

    • @JenniferMaker
      @JenniferMaker  2 месяца назад

      Yes, safety first, wait for it to cool a bit longer!❤️

  • @sharonfangsrud4248
    @sharonfangsrud4248 2 года назад +1

    Heading off to our Annual Advent Tea at church - will have to watch the replay. Looking forward to it later this afternoon!

  • @brendanugent1849
    @brendanugent1849 2 года назад +1

    Hi. I’m just not to sublimate yet. But. I am most interested in learning new things

  • @rebeccaofpollywogflatts8976
    @rebeccaofpollywogflatts8976 2 года назад

    Thank you for sharing so much information.

  • @carmengable3289
    @carmengable3289 8 месяцев назад

    Can I use A-sub 125 with the Sawgrass SG 500? The Trupix paper is not giving me the vibrancy I want

    • @JenniferMaker
      @JenniferMaker  8 месяцев назад

      Yes, you can. Check the Print Managers Print Settings window, the Print Manger may use a profile that is not adequate for your paper, inks or substrate which can result in incorrect colors. Here is some help from Sawgrass. care.sawgrassink.com/hc/en-us/articles/10661912577307-Troubleshooting-Steps-Colour-Output-Issues#:~:text=If%20you%20are%20not%20using,put%20down%20on%20the%20paper.
      care.sawgrassink.com/hc/en-us/articles/10620711266971-Paper-Tips-Tricks-Information#:~:text=Texprint%20R%20or%20DT%20R%20Heavy%20(DT%2FH)

  • @chrisash7258
    @chrisash7258 Месяц назад

    Can you use sublimation paper with a laser jet color ptinter?

    • @JenniferMaker
      @JenniferMaker  Месяц назад

      No, you cannot directly use standard sublimation paper with a regular laser jet color printer; you need a special sublimation toner cartridge designed for laser printers to print sublimation transfers on a laser printer, essentially "converting" your laser printer to a sublimation printer by swapping out the regular toner cartridges with sublimation toner cartridges.

  • @sheilamcgee3865
    @sheilamcgee3865 2 года назад

    HI Jennifer what's the brand name of the DTF transfer film sheet, it's brand who makes the transfer film

  • @dhey007
    @dhey007 11 месяцев назад

    Can you use A-Sub paper and another brand of sublimation ink? I'm new but I'm considering Hiipoo ink in a new Epson printer (ET2800) but it seems the A-Sub paper is the best to start out to keep variabilities to a minimum. And what ICC profile would you recommend for this combo? Thanks for any help you can offer with this.

    • @JenniferMaker
      @JenniferMaker  10 месяцев назад

      Here is a helpful tutorial. jennifermaker.com/epson-ecotank-setup-video/

  • @hayleebarta1992
    @hayleebarta1992 7 месяцев назад

    Why would u protect the heat pad? Isn't that what it's for? Genuinely asking as I'm new to all this lol.

    • @JenniferMaker
      @JenniferMaker  7 месяцев назад

      To avoid sublimation ink from getting on it. You can use white card stock for protection.

  • @monadove811
    @monadove811 2 года назад

    Can't wait to try sublimation crafts... so exciting

  • @loriwilliams2393
    @loriwilliams2393 Год назад

    Hi Jennifer, I am hoping you can help me I just recently tried the printers jack sub paper, and I am having the worst time with it sticking to my tumblers and cups do you think it may be because I am using a Epson wf printer?

    • @JenniferMaker
      @JenniferMaker  Год назад

      I am not really sure. You can ask in the group to see if anyone has experienced that. facebook.com/groups/sublimationmadeeasy

  • @wendyxolivax6128
    @wendyxolivax6128 5 месяцев назад

    Does the Epson ET 2803 works with sublimination paper or it has to be a special ink?

    • @JenniferMaker
      @JenniferMaker  5 месяцев назад

      It does not work with inkjet ink. The printer would need to be converted to a sublimation printer. Here is a tutorial for setting up an Epson EcoTank printer. jennifermaker.com/epson-ecotank-setup-video/

  • @anchorsmedia1194
    @anchorsmedia1194 7 месяцев назад

    where can i find a good ICC profile for A Sub paper, Hippo Ink, and a Epson ET 8550. Also, does monitor calibration matter.

    • @JenniferMaker
      @JenniferMaker  7 месяцев назад

      You find the ICC profiles on the Hiipoo website!🥰

    • @anchorsmedia1194
      @anchorsmedia1194 7 месяцев назад

      @@JenniferMaker I cant seem to find one for my printer ink Paper combo: Hippo Ink and Paper, Epson ET 8550

  • @jules1990
    @jules1990 Год назад

    I'm in the UK and pulling my hair out. I use Cricut design space and I bought some sublimation mug paper 3.5" by 9". I set my printer as user defined for the paper measurements 3.5" by 9" and page orientation to portrait. What's confusing me is the paper settings in Cricut when I send it to make it. Do I set this as A4 document, or legal document. I tried setting it to A4 then loading my mug paper in my Epson printer but some letters are missing. 😢

    • @JenniferMaker
      @JenniferMaker  Год назад

      You can post pictures and ask in the groups for help so we can see what is going on. facebook.com/groups/cricutcraftersandmakers/ facebook.com/groups/sublimationmadeeasy

  • @bobbidavis6942
    @bobbidavis6942 2 года назад +1

    I love your classes

  • @elizabethramos6454
    @elizabethramos6454 16 дней назад

    Do you recommend I use this Sub 125 paper on Shiets?

    • @JenniferMaker
      @JenniferMaker  15 дней назад

      Yes, Sub 125 paper is suitable for printing on t-shirts. Sub 125 paper is a heavy weight paper, which means it's better at holding ink and saturating the surface. Heavier papers are recommended for vibrant, full-color designs.

  • @donnabranton2502
    @donnabranton2502 2 года назад

    Congratulations to the winneres

  • @jules1990
    @jules1990 Год назад

    If you use a lower GSM paper does it effect the quality of image. I've seen so many mixed reviews. Some say the lower the GSM sublimation paper the more vibrant the colours are. Some say use a high GSM but your colours won't be so vibrant. What do you recommend for mugs and tshirts please. Thanks from the UK

    • @JenniferMaker
      @JenniferMaker  Год назад

      The sublimation papers listed on the post should all work. jennifermaker.com/what-is-sublimation-paper/

  • @farhadsaberi
    @farhadsaberi Год назад

    Has anyone tried this to make PCB's? (Printed Circuit Board). Would ink traces as thin as 0.25 mm be clearly (not smudged) transferred onto a flat copper metal surface? thanks.

  • @soritaerasmus1271
    @soritaerasmus1271 Год назад

    Hi Jennifer i got the Epson sublimation L1250 printer and the cri cut mug press the paper i got with printer can that be used to put photo on a mug with mug press i tried but it won't copy to mug not the white side nor the light pink side of paper works am i using wrong paper or doing something wrong pleaseee!!!! help me

    • @JenniferMaker
      @JenniferMaker  Год назад

      Make sure the mug is made for sublimation. You can post photos and ask in the group for help. facebook.com/groups/sublimationmadeeasy

    • @soritaerasmus1271
      @soritaerasmus1271 Год назад

      Yes mugs are from cricut itself but my paper is white one side pink other side but nothing works printed a photo on paper but wont stick on mug

  • @stephaniecouillard7982
    @stephaniecouillard7982 Год назад

    I just started sublimation and I got the a sub 125 g paper and have sublimation ink inside my Epson eco tank 2400 but it’s not transferring can you explain what I should do

    • @JenniferMaker
      @JenniferMaker  Год назад

      Make sure you are printing on the correct side of the paper🥰

  • @CarmenM04
    @CarmenM04 2 года назад

    Thanks for another great project

  • @michaelk946
    @michaelk946 Год назад

    I am a photographer and thinking about an Epson 8550 to make metal prints. Your channel has helped me a lot. I thought I’d try this before moving up to the big printers for large metal prints. Any suggestions appreciated.

    • @JenniferMaker
      @JenniferMaker  Год назад

      These are the ones we tested. jennifermaker.com/best-sublimation-printer/

  • @taniamills-d7t
    @taniamills-d7t Год назад

    I have a problem with the transfer from paper to mug it does not transfer onto the mug ,can you use the A_sub 125g A4 in my cricut mug Machine does it get hot enough to transfer Image onto mug

    • @JenniferMaker
      @JenniferMaker  Год назад

      That should work fine. Make sure that the paper is taped down well.

  • @moridatinucci4449
    @moridatinucci4449 Год назад

    I have a Sawgrass 500 ...printed on image but the red is more like orange ...any suggestions on how to remedy this ?

  • @kaycrothers2399
    @kaycrothers2399 2 года назад

    Thank you Jennifer

  • @deniseorlando-garcia1773
    @deniseorlando-garcia1773 2 года назад

    Hi Jennifer. Greg’s Glowforge cut outs are sooo cute. They would be a great giveaway!

  • @marielpackard8935
    @marielpackard8935 Год назад

    What is the best way to wash shirts that have a sublimation design on them? Or is there something that can be done to the shirt to prevent the ink from resublimating later?