This has to be the best ready to run WPL has made yet! I will upgrade this to get the performance I like. Check it out here: www.wpl-rc.com... #RunThatRc #WPL #C64-1
I like what WPL brings to the table. They hit that middle ground between toy and hobby. Their models are super affordable, upgradeable at a good price too, and they look fantastic. Not the most capable trucks, but for what they are, I like them!
Yo guys if u replaceable the axle on the wpl c64-1 with the axle on the c24 and reverse the diff u can use the c24 axle and it doesn't bind up and u can steer fully I have my servo mounted on the 3rd hole up that's how to fix the wpl c64-1 steering and binding guys hope helps someone
you actually dont have to. According to WPL this is just on the review units. They say that the ones going to customers doesn't have the cut out issues.
4 месяца назад
@@RunThatRC Good to know! I was already ordering another hobbywing 1060 but I think I'll give the c64 a chance first. Can you tell me if a Li-ion 18650 battery will fit in it?
It does use the 18650 style batts. Only thing is they use that new wiring they have been using. I usually just cut out the stock connector for what I use most.
I was disappointed as well. They said the production versions don't have the issue but still cut off at a higher load range. I always replace electronics anyways and this is a great starting point for mods.
load protection. According to WPL the units that are going out to customers isn't going to have the cutting out issue. For us reviewers they just mentioned how to get rid of the cutout but they didnt inform me till after I made the video. Simple as jumping a wire on the board and no more issue.
I really love this truck, just wish I could find a dependable place for upgrade parts. I should have just gotten a c24 instead or something older I could find parts for, for my first one.
@@RunThatRC Thank you, I was able to find some portal axles locally while WPL was out of stock on axle parts, WPL restocked and I ordered theirs as well. I’ve got a 370 motor and gearbox I’m going to put in it until I can get everything needed to install the 370 with 2 speed gearbox. This should keep me busy while I was send MN78 parts that got shipped instead of c64-1 parts back to china for a refund. Plus with all the extra parts, I have an excuse to buy something else to put them into.
Definitely works. This one with a 370 motor and v3 electrics or 1080 with your own radio gear. That can make this real good with this new gearbox. Run it on 3s and it has good control with some wheel speed as well.
I found it today at my place... 1st saw it i feel amazing because of how it look very great with that kind of bar at the front and the back... Of cos the wheels is absolutely my taste for a car like Toyota Hilux and another 4x4 car neither in real life or just RC type... Thanks for the video bro... I'll gonna buy it soon and ready for the next upgrade performance and durability after play it... If you've a tips yeah just tell me about it bro 👍🏻... Keep up the good work
Let me guess it failed again right there and again right there yeah you should just explain that I had multiple failures on the original most kind of annoying
I'm not sure what you mean? I am not doing a voice over. That's actually audio from the actually trail run and I have to say something so people know whats happening. There isnt going to be a cutout issue with the ones for sale thankfully. This is a pre sale unit. I'm not one of those channels that just expects you to just take my word. No sugar coating like some channels that receive free products and say nothing but good thing to take your money.
I wonder if swapping the stock ESC/receiver with the ESC/receiver from the C24-1 would work better. Seems to handle the load better than any other model.
@darrenmackenzie1645 I think there is plenty of space under the hood to make it fit. Also a 370 motor from the wpl 2 speed should smooth this thing out a bit.
Maybe somebody will try to swap the stock motor with the one that has more turns count/lover rpm....😉 Maybe it will be another cheap upgrade, who knows...😶🌫️
Just FYI. The production version isn't going to have the cutout issue according to WPL.
www.wpl-rc.com/products/c64-1?ref=RunThatRc
I like what WPL brings to the table. They hit that middle ground between toy and hobby. Their models are super affordable, upgradeable at a good price too, and they look fantastic. Not the most capable trucks, but for what they are, I like them!
Yo guys if u replaceable the axle on the wpl c64-1 with the axle on the c24 and reverse the diff u can use the c24 axle and it doesn't bind up and u can steer fully I have my servo mounted on the 3rd hole up that's how to fix the wpl c64-1 steering and binding guys hope helps someone
nice! Thanks for sharing.
I'm glad WPL made these. I WISH they would make an FJ-Cruiser Shell. You know what would be cool? An RC Scion xB and TC, both based on the D-Series.
I have the radio shack 05 scion tc. They need an fj and 4runner!
Try to review the mn128 because the new version has separate esc and see how you thought the new one
I thought the electronics had been improved, the video reminded me a lot of the wpl c54. I'll have to change the electronics as soon as it arrives
you actually dont have to. According to WPL this is just on the review units. They say that the ones going to customers doesn't have the cut out issues.
@@RunThatRC Good to know! I was already ordering another hobbywing 1060 but I think I'll give the c64 a chance first. Can you tell me if a Li-ion 18650 battery will fit in it?
It does use the 18650 style batts. Only thing is they use that new wiring they have been using. I usually just cut out the stock connector for what I use most.
Oh, this is not a pro WPL add, with all those cut-offs. The new V3 electronics are still not good enough? That's rather dissapointing.
I was disappointed as well. They said the production versions don't have the issue but still cut off at a higher load range. I always replace electronics anyways and this is a great starting point for mods.
as soon as i get mine the electronics gonna get swapped.
definitely will step up the performance.
What motor does the RTR come with? Did you ever figure out why it was cutting out? I thought that I saw the headlights flickering when it cut out?
load protection. According to WPL the units that are going out to customers isn't going to have the cutting out issue. For us reviewers they just mentioned how to get rid of the cutout but they didnt inform me till after I made the video. Simple as jumping a wire on the board and no more issue.
I really love this truck, just wish I could find a dependable place for upgrade parts. I should have just gotten a c24 instead or something older I could find parts for, for my first one.
you can use some of the c24 parts like metal axles and wpl 2 speed.
@@RunThatRC Thank you, I was able to find some portal axles locally while WPL was out of stock on axle parts, WPL restocked and I ordered theirs as well. I’ve got a 370 motor and gearbox I’m going to put in it until I can get everything needed to install the 370 with 2 speed gearbox. This should keep me busy while I was send MN78 parts that got shipped instead of c64-1 parts back to china for a refund. Plus with all the extra parts, I have an excuse to buy something else to put them into.
Your build was killing it out there! I just got my white c24-1 body to finish up my cf build
How can you record so close and drive at the same time???
I'm talented like that! 😄 Ok ok It's one hand driving and other hand gopro on a selfie stick.
I dont know why they dont stick with the C24 electrics and motor/gearbox. No issues with that combo. Lovely truck tho, great video! 👍
Definitely works. This one with a 370 motor and v3 electrics or 1080 with your own radio gear. That can make this real good with this new gearbox. Run it on 3s and it has good control with some wheel speed as well.
@@RunThatRC yeah, nice set up that. I have the same but with a 1060 in my MN99s... spot on 👌👍
I found it today at my place... 1st saw it i feel amazing because of how it look very great with that kind of bar at the front and the back... Of cos the wheels is absolutely my taste for a car like Toyota Hilux and another 4x4 car neither in real life or just RC type... Thanks for the video bro... I'll gonna buy it soon and ready for the next upgrade performance and durability after play it... If you've a tips yeah just tell me about it bro 👍🏻... Keep up the good work
I Kind of Like the Body. New tires and Electronics it would be amazing i think ?
for sure those upgrades will make it way better.
Okay we get it. It's cutting out😂
😂 I just had to make sure you guys knew it cut out and wasn't my awesome trailing skills 😆.
Hello, you have the links from the upgrades?
Liked and subscribed! Great vid.
Awesome, thank you!
I would t have had to wait for this if you would have sold us yours 😁. Great job on your build
They definitely put it together better than my modded one that's for sure 😂.
The new version looks more hobby grade.. very tempting to add one to the fleet. It would look nice next to the C24-1 😊
the body alone makes it worth it. I seen somewhere someone mounting a c24 body on a modded trx4m chassis. I would probably try one of those builds.
@@RunThatRC yeah much more capable rig. Are you going to weather yours or leave it clean?
@scaleworksRC not 100% sure what I'm doing with it yet, but I will make a video when I do start upgrading this thing.
UNGLUED TIRES!?
it's just a built slipper to help maintain traction. 🤣
yeah that's what I meant to do 😆
This looks great. I may get this for trails!
They do look great on the trails!
🤔
imagine the rtr with the way the suspension is so smooth and installing a 2speed and 1080 esc. it would trail so scale imo.
Let me guess it failed again right there and again right there yeah you should just explain that I had multiple failures on the original most kind of annoying
I'm not sure what you mean? I am not doing a voice over. That's actually audio from the actually trail run and I have to say something so people know whats happening. There isnt going to be a cutout issue with the ones for sale thankfully. This is a pre sale unit. I'm not one of those channels that just expects you to just take my word. No sugar coating like some channels that receive free products and say nothing but good thing to take your money.
I wonder if swapping the stock ESC/receiver with the ESC/receiver from the C24-1 would work better. Seems to handle the load better than any other model.
it might. I'm gonna install either a wpl v3 esc receiver or a hobbywing 1080 and a 370 motor. Should perform better just with that upgrade.
@@RunThatRCis there room for a HW 1080 with the interior still in the rig. I get the LiangRC trays for my 2 C24’s for the 1080 esc’ s .
@darrenmackenzie1645 I think there is plenty of space under the hood to make it fit. Also a 370 motor from the wpl 2 speed should smooth this thing out a bit.
Maybe somebody will try to swap the stock motor with the one that has more turns count/lover rpm....😉 Maybe it will be another cheap upgrade, who knows...😶🌫️
I actually like my C54 rtr gearbox with a 1080 esc and 370 motor from the wpl 2 speed. This one needs that to perform to my liking.