Building headless electric guitar with some help from Ortur laser engraver. Full Guitar Build Video
HTML-код
- Опубликовано: 29 сен 2024
- Building headless electric guitar with some help from Ortur laser engraver.
Buy this guitar at a discount: magicatticguit...
Get your Ortur laser to help you with your guitar building.
Best price at madethebest:
bit.ly/3s4Vxj2
Or you can buy it on Amazon instead:
amzn.to/3D98rCO
Here is the link to FREE SANDING ROD PLANS:
www.buymeacoff...
And here is my website where you can order your custom guitar, custom premade fretboards, or guitar building templates:
magicatticguit...
I hope you enjoyed watching this video. This was my first attempt at building a headless guitar. It is actually much the same as standard guitar build. The only difference is planning the build.
I am not completely satisfied with the end results. There is some color bleed into the pores of ash wood so the border lines on the top are not as clean as I wanted them to be.
It is only an aesthetic issue but I cannot sell this guitar for its full price because of it.
If you would still like to purchase this guitar contact me on my website and We can talk about special price:
magicatticguit...
Some of my favorite tools from IGM:
CMT 7E Router 2400W: www.igmtools.c...
IGM Pattern Router Cutter TC Knives: www.igmtools.c...
IGM Bevel Trimming Cutter TC Knives: www.igmtools.c...
Truss rod 6mm IGM Upcut Spiral Router Cutter: www.igmtools.c...
IGM Heavy Duty Parallel Jaw Clamp: www.igmtools.c...
IGM Parallel Jaw Clamp: www.igmtools.c...
Silky Woodboy Hand Folding Saw: www.igmtools.c...
IGM Wave Forstner Bit Set: www.igmtools.c...
IGM Wood Twist Drill Set: www.igmtools.c...
Titebond Original Wood Glue: www.igmtools.c...
Titebond Wood Glue Brush: www.igmtools.c...
Yes. It is good without any music. I like the soft neck heel.
Thank you.
I never thought about whether this should have music or not but once you’ve asked for ‘my’ opinion(!?) I’m now pretty sure that I don’t want music (don’t ask me why😂)
😄 Thanks. It still helps.
Damn, dude, Ur guitars are beautiful
Just subbed
Thanks man 🤘
Страдивари!!!!
😄 Thanks!
Lovely guitar. And I really admire the comination of technology and hand tool skills in your process - you have got the balance right IMO. You are a 'proper' craftsman as well as a great designer!
Thank you very much. This is so nice to hear. I'm flattered.
8:22 - 🤯 that is the tool I’ve always wanted and never knew existed!!
I would never of thought of inventing such a thing myself
W E L L D O N E, SIR!!
Thanks man! I'm happy you like the tool. Tag me on Instagram if you end up making it. I would love to see.
Gorgeous looking guitar.
Thanks man!
That is a clean build! I especially like the cut-out for the jack, I'll need to try that on a future build.
Thanks man. I like the cut-out too. It really puts the jack out of the way.
What is the Black material you glued between the body Back & body Top?
It adds a beautiful accent!
It's just a black veneer. Thanks!
reminds me of the black rangers battle axe from power rangers. they don't look anything alike but this could be a power ranger weapon.
Could be🙂 Thanks for the comment.
Stunning absolutely stunning! You’ve taught me a thing or 5 about the process in this video. Thanks for sharing!
That's awesome. Thanks David!
Do you also make custom headless guitars?
I do.
Nice work man! I would almost bet, judging by your Eng accent, that you come from the small and beautiful country that has about 40km of Adriatic coast and a 2850m highest mountain. Can I ask why you opted for the glued neck, was it aesthetics or also sound? And did you make your own pickups? I have never seen that shape of pu's before. Last question :) ... what gauge strings did you put on. The low E looks like it's quite thick, like 54 or 60. Cheers
Haha true. 😄 I believe that set neck has an influence on a string vibration enhancing the tone and sustain. If the joint is made properly it is almost like necktrough.
Pickups were custom made by Gorilla Pickups. I highly recommend them.
Strings are just standard daddario 10s.
But the guitar is tuned to D# standard.
@@MagicAtticGuitars mam eno vprašanje, bi lahko jaz enkrat prišel pogledat tvojo delavnico? Nekaj časa se sam ukvarjam z nadgradnjo in servisiranjem kitar in me zanima kako izgleda. Seveda bi moral zdržat tud kako vprašanje ;)
All videos are better without music without exception
Thanks!
Wooowww...!!! Amazing.. nice video 😁👍👍👍
Thanks 😊
dude i really love how you choose different head style, i love how badass the guitar looks, and i really support musicless video, ASMR of woodwork is the greatest of them all!!
As always it's been pleasure watching your work 😁😁🎸🤘
#KeSiUrbi 😆
Thanks bro.🙂🤘
#prit na kufe😄
using alien technology to make the best guitars !
😁 Thanks bro!🤘
Great work! Enjoyed your video very much. What is the black plastic-like thin material you use for the body? What kind of silver powder have you used for the inlays? The look cool! Thanks
Thanks. The black material is a maple veneer that skateboard builders use and the powder is aluminium dust.
How much would it be for a Steinberger GM2T (Body and headless neck), but routed for a Floyd Rose?
I'm sorry but I don't do copies of other brands.
@@MagicAtticGuitars I understand. But I figured it wouldn't be a copyright issue with a Floyd Rose route. Thanks for getting back to me. If I wasn't legally blind, I'd try and make one myself.
what is the black plate coated on the wood ? Thnks,,.
I'm not sure what you mean. Tell me more please.
Too many gadgets & tools are being used !! Lacking simplistic skills.
I'm a sucker for tools and gadgets:)
The lure of sponsorship makes him less crafty in the workshop and rather soul-destroying for us. I'd prefer a through-neck build for this type - for stability and that beautiful lamination down to the tuners!
Ciao. Hi. Did you use chinese bridge?
Hi. No. It's an ABM bridge.
Master builder 🤟🤟🔥🔥🔥
Thanks man 🤘
where did you get the bridge assembly.
From ABM guitar parts.
making guitars with a laser cutter is cool ....but a guitar that makes lasers that cut would be cooler !!!!!!
A guitar making laser cutter that makes guitars. 😁
@@MagicAtticGuitars isn't that "the singularity" of AI Isaac Asimov warned us against? The robots are taking over!!
@@gavrilopricip11 😅
Hey, how does someone learn to do this?
Watch my videos 😄 No seriously there are a lot of information on Internet and videos on RUclips. I learned with trying and fixing mistakes.
Great content.. you encouraged me to purchase that engraver! But I don't known what Is the máximum Depth of engrave.. you could give me some enlightment about it
Thank you! It very much depends on the material and settings. It's impossible to give an general answer to this question.
@@MagicAtticGuitars For wood.. could I engrave a body or neck?
Yes sure. It also depends on the density of the wood. I was cutting 4mm thick walnut with it.
@@MagicAtticGuitars Pretty hard wood.. no jokes on it! xD
What Brand are those headless bridge
ABM
now i get it why guitar so expensive
Yes, there's a lot of work put into building a guitar:) Thanks for your comment.
I did enjoy that ... thanks !
Shrooms would go well with this . And play the guitar etc. some of your own .
Yeah this is amazing! Your craftsmanship is incredible!
great job but need a little more personality
16:40 Hey man can you give us a shoot of your spraying booth? looks sweet. Awesome work, subscribed.
Thank you for sharing
Thanks for the comment 😀
I love your guitar builds! Keep on rocking!
Thanks Toni!
like it with no music :)
Thanks:)
Завораживает работа мастера!
Thanks!
Did you spot that fly's cameo? xD.
Good job, man. I wish I had this talent and build my own guitars
Haha you are the first one who noticed the fly 😄 Thanks man! Talent is developed by practice.
Hi !
Where can I find the template to frets distance (with scale in mm) ?
What is the distance between the frets and the neck pick up ?
Could You pleasr give me a link ?
Thank You !
Excelente Acabados y calidad 10
Thanks Jose!
Have you had any issues with the audio jack over hang behind so thin? I would be afraid of dropping the guitar and cracking it
Отличная работа и оснащение мастерской!
Thank you very much.
I like the video without music. But would very much like the video with your speaking explaining what you are doing and why.
Thanks. You wouldn't mind my weird accent and broken English?
I’m interested in a custom build, but all the like on your website are broken. How can I reach you?
Hi Jeff. Thanks for letting me know. I'll fix it as soon as possible.
I like videos without music. Usually the music chosen is something that I really don't want to listen to, and makes me change the channel more often than not.
Thanks Scott.
This turned out killer. You mentioned templates? Those for the Ortur or just to buy? I’d love some.
I can make templates for your custom design if that's something you would like. You can contact me on my website.
Ach, gdybyż można było dać 5, albo jeszcze lepiej 10 "like'ów" - dałbym z radością! Pozdrawiam z Polski.
Dziękuję Ci Papa Pluto :)
Beautiful guitar, build, and video. I prefer not having background music. Thanks
Thank you very much.
How to you tune it?
At the bridge.
does the multiscale on the 12th fret always go straight up...thank you
You can decide which fret you want to be straight.
What are those string locks you used behind the nut? I've been looking at different string locks but haven't seen those before. I like those a lot better than what I've been seeing!
Those are ABM.
Very cool. Just found your channel. Though you said it was a 3MW laser! 🙃 "Oh boy..we are going to see some cutting now!" I appreciate no music and just sound effects and narration. Love your work Sir. Best Regards and Best Wishes. Subscribed.
Thank you very much. I really appreciate it.
Lot work but end day they look beautiful
You do some amazing work use new tech help you long keep it up you are live
The dream
Thank you very much 😊
If anything, I'd opt for a longer video. like 30 minutes to one hour.
I have this same laser but I can't cut through MDF like that. Is your laser over-powered?
This was a 10w output module. I had to go slow and with multiple passes. But it made a cut. How thick is a board that you want to cut? Mine was 6mm.
@@MagicAtticGuitars yeah 6mm MDF. Even at 100mm/m and 100 power it won’t cut. No matter how many passes.
where to buy?
Magicatticguitars.com
Hey man! Came across this by chance and....that is a sterling job! Really interesting guitar, nice one!...I just got into headless guitars, they are great and that looks gorgeous bro.I have just got a custom headless 7 strings, but maybe in the near future....you have no order form for headless on the site; is that an unusual build ?
Thanks and very nice work.
🤟👽
Thanks man! I'm very happy to hear that. Yet it was ment to be a one time custom build, but it seems to be quite popular. So I will add it to my site soon. I would love to build one for you. Keep in touch. 🤘
i'm definitely making a sander like that. both. the drum sander on the drill and i like that tight fitting fretboard radius sanding block. that's my next project.
Awesome 🙂
Please my friend, don't spray anything without wearing a respirator.
Can it solder? Can it cut? Weld? is it an accessory that lasers of your fret board to teach you? What type of laser?
לזה קוראים יד של מקצוען. הייתי מת לנגן על הדבר הזה. אלוהים ישמור אותך אחי
some help...
A little bit 😁
can i ask your power and speeds for cutting the mdf with the laser?
Sure. For 6mm mdf I used 400mm/min speed, 100% power, 3 passes.
Excellent
Thanks
VERY cool video and very,very cool guitar! I enjoyed the "no music" format.
Thank Mike!
Tuyệt vời quá
Thanks!
No music 👍
Thanks!
So talented, I was thinking I would miss the music but I did.
Quality build, can’t wait for your ggbo entry
Thanks mate. I still have no idea for the ggbo. I will probably do something under pressure of the last moment.
Signed in just to say yes, greatly prefer the video like this with no music overlays. Really nice build too. +subscribed
Thanks Nathan. I very much appreciate it.
I absolutely like videos like this without "packaged" music. I do, however, always like to hear with the instrument sounds like when it is played someone other than the builder.
Thanks man. I still haven't recorded a demo for this one. I'll post it on my Instagram when it's ready.
Wow! This gives me some interesting ideas. Amazing.
Nice. Thanks man!
Dude. I had to watch again. Great job!
Thanks man!
perfect job, I wish I had one of these ! Greetings from Brazil!
Thanks man. I will sell this one on a discount. Contact me on my website if you are interested. ( magicatticguitars.com )
I like the shape quite a bit. The epoxy fill looks better on the fretboard than on the body, imo. Very precise way of building.
Thanks man. I appreciate your opinion.
Absolutely beautiful. Absolutely gorgeous bro👍🏻🤩
Thanks man!
I like the sound of the tools and working.
Thanks Rachel.
Very nice guitar where r they available to buy ?
Thank you Lorenzo. I am seeing them on my website ( magicatticguitars.com). If you are interested in this particular one contact me and we can arrange something.
Amazing! Love how original it is. Great job.
Thanks man!
Beautiful work. So many wonderful & creative ideas.
Thanks Gerry!
clean simple bold design....so beautiful...
Thanks 😊
This is awesome! Lovin this guitar build of yours! Cheers!
Thanks man 🤘
That's an awesome looking guitar
Thanks Jim!
Well done ! Beautiful job, a lot of it freehand: fascinating !
Thanks man!
I LOVE that body shape, great work.
Thanks!
Como eu consigo o plano dessa guitarra?
Amazing job, love the neck heel carve the most.
Thank you Daniel.
another excellent build Izak. love the laser engraver purfling, looks fab! how deep can the laser cut?
Thanks man! It very much depends on the material. I haven't tested it to the extremes yet but I managed to cut 5mm walnut in few passes. I think I will be using it a lot for my builds.
@@MagicAtticGuitars oh that's cool, 5mm was deeper than I expected. Looking forward to see what else you come up with
What is the cutting area with the extensions?
It's 40 x 80cm.
Class all the way here. Too notch!
Thanks man!
What is black material on 2:13?
It's a maple veneer for building skateboards. I got it from dropin boards.
Beautiful clean and the lines so 2022
Thanks 🙂
what type of spray have you used?
That's one of the coolest guitars I have ever seen.
Thanks Marty!
yes that raw sound of the tools is ear soothing!
Thanks man!
linda guitarra , seu trabalho é o melhor , parabéns!!!!!!
Thanks man!
Sangat keren pak?
Thanks 🙂
@@MagicAtticGuitars sama sama pak? Salam dari Indonesia
Lovely looking guitar. Which bridge and head piece are they, are they any good?
Thanks Ian. I'm using ABM parts. They are manufacturing high quality guitar parts in Germany. I like their stuff.
@@MagicAtticGuitars many thanks.
@@Cadmonkey no problem.
👏👏👏👏👏👏👏
Thanks!
Dude… I am so sorry I didn’t see this sooner. Friggin beautiful.
Beautiful work! and great video too!
Thanks 🙂