A Clean OEM+ Looking System // 2021 Bronco ARB Skid Plates
HTML-код
- Опубликовано: 26 янв 2023
- Decided to give my Pokey Horse some attention with a few upgrades.
Social & Merch Links:
Website: www.sarahntuned.com
Instagram: sarahntuned
TikTok: sarahntuned
Twitter: sarahntuned
Patreon: / sarahntuned
Amazon Store: www.amazon.com/shop/sarah-n-t...
Merch: shop.sarahntuned.com
Special Thanks to my Patreon Support!
Britt F.
Chad B.
Col. L.
Curtis S.
Daniel F.
Darren M.
Dave
David L.
Jeffrey P.
Josh H.
Kevin C.
Mark L.
Meghan "in Seattle"
Nenad R.
Ray I.
Terry S.
Todd C. 
Авто/Мото
I like when Sarah adds high quality upgrades and takes the time to show side by side comparisons and measurements. That’s part of what makes her videos professional-level productions. Thank you, Sarah. 👍👍👍
Not everything in life needs to be necessary. Laughing with our fav Sarah is tho.
It wouldn't be a Sarah n tuned video without Sarah hurting herself 😂
Cleaning before you mount the brackets isn't just about looking new, you don't want dirt scrunched in between the parts because that's a ticket to gnarly outcomes.
ARB stuff is always beefy. I love those counter-sunk bolt holes too. So many manufacturers just have the bolt heads laying on top for rocks to chew on. Nice upgrade, for sure!
That’s why I went with theirs, just all around better quality.
@@SarahnTuned Hello from Australia Sarah 🙃
ARB have a minimum three-year worldwide warranty too.
ARB is Underoos for off-road vehicles from the land down under. I love OCD people,too. Thorough and clean, done right !
"Can you milk a skunk??" 100% has to be on the end of year Sarah compilation.
if you've had your rabies shot, and lost your sense of smell due to covid, then the answer is yes.
You can milk anything with nipples.
Depends on how drunk the skunk is
I made it through decades of adulthood without thinking about skunk teats... until today.
THANKS, SARAH
@@christopherbrown6697 I almost never wondered about milking a skunk to make Skunk Milk Gogurt Pops, that is until today.
Just the greatest channel and the hardest working content creator😊♥️
Im a firm believer in torgue wrenches like Sarha
if I was a car I would really want Sarah to be my owner, her attention to detail is phenomenal! another excellent contribution to the automotive community, thank you Sarah 😁😁😊😊
I think this video will save some people's sanity.
Also, we need Austin Powers 4 just for Sarah's reaction
“Ahhh, I see how it goes…. Bent it wrong. That sucks…..
I absolutely love the running commentary. Thank you for some of the best content on the inter webs.
Gotta admit I snort-laughed at the shot of you sideways through the car holding up the roof panel with the tips of your toes. These are the crazy things a solo project requires!
Nope not overkill at all! I've smashed my front skid (stock) on a tree stump covered in snow in my 4runner and that saved my oil pan BIG TIME. The skid plate was totally deformed so I upgraded to an RCI front and mid skid. That one bad move is all I needed to know that skids are totally worth it.
Pokey is getting some nice underthings. Looks really well designed.
G'day from Sydney Australia Sarah,
Congratulations on purchasing some of the finest Aussie 4WD products and your tutorial was on point and very informative
🤠👍
The front skid plate matches your Paint better 👍👍
Hooray! A diff skid that's actually supported all the way around so it won't just smash into your diff anyway if you hit a rock... Love ARB stuff, use their dual compressor like everybody else but I've never heard anything bad about any of their products other than price, and you get what you pay for...
Loved the solution for removing roof tent. The upgrades look a great improvement. As always another great informative video.
Much awaited, much appreciated excellent work as always.
👍👍
That was a pretty clever way to get that thing off the roof Sarah. You really are a stable genius! (Bronco. . . Stable. . . get it?)
I'm waiting on the Sarah-n-Tuned Cookbook of all the delectable delicacies teased in all of these video intros!
It should be a recipe book on the outside, and even a Table of Contents list of the recipes named, but inside it should contain the many names of Angel Food Cake and her other witty comments.
Nice! I love everything ARB I’ve put on my Power Wagon, no issues with any of it.❤
That's a nice skid plate system.
I'd grab some silver colorered [or stainless], button head bolts with some locking hardware on the backside, to fill the holes.
Nice job!
Can't wait for more Celica content [I also like the return of the Focus Rally project].
Great job Sarah and it will stop your catalyst from being stolen
2.3 cat sits up high difficult to steal
Nice video. Any chance for an update video on your sister's Xterra? Is it still running strong? Any more changes made to it?
ARB stuff is here in Australia is the the industry standard for toughness and reliability. Well done
Its very satisfying seeing a clean and well equipped ride well done Sarah and Angel 👍👍😎
I worked for ARB many years ago. They make quality products that are well designed and easy to fit.
Like mountune with Fords. Do they make anything for the Suzuki DR650? How about the Ford EcoSport?
Great upgrade video! Funny jokes too! What more could you ask for!
In answer to the question, "was this really necessary"? YES. Because we need a new Sarah video every three days! I always learn something from your videos.
ARB products are the ultimate! I put on their bumper on my LC100. I thought it was overkill, then I hit someone hard (not my fault, they stopped on the middle of a right of way). Anyways, I thought my rig was totaled (the insurance company was going to do that because of its age), but the frame horns were not bent at all. The thick ARB bumper took all the impact. So I got the money, got another ARB and my rig lives again. Long live ARB!!
Thank You Sarah, i'm glad you didn't get hurt and that you had your trusty helper Angel there. I enjoyed this regardless of what YT metrics say.
I have ARB bumpers on my Jeep. ARB are one of the few off-road aftermarket companies who are engineering and testing their parts to meet OEM levels of safety. This stuff is important if you want your airbags or crumple zones to work properly in a crash. And this includes stuff like skid plates.
Oh snap, here comes Upgrayedd flick. Since those skids are from Australia, you must install them upside down to be correct.
Great job on the video Sarah! Thanks for making it. I too come up with various methods to address the problems that come from working on your own in the shop. Bronco is looking tough.
Aw, the delicious skunk milk gogurt pops recipe video link is missing... Though, it's ok - skunk milking season starts in May only.
Arb parts are probably way better steel too than orginal. Nice job and video!💯😎🔥👍
The hardest part of milking a skunk, is to get a milking stool that is short enough for the job.
i have an arb bash plate on my 4 wheel drive, first time you hit something hard you will be glad you fitted it, i live in australia where arb products are made
Excellent upgrades Sarah!
You were really funny on that one😄 I do agree about the arb skids. It does the job, it keep it light and if you bend them you'll be able to hit them back. That little 🐎 should get a lift with 39.5 " SS Iroc 👌😎
Its nice to see Aluminum control arms on the front of this Bronco, but for off roading wouldn't those also be a weak point? I would imagine if your going over rocks often, steel would be better than the Aluminum? I'm no off roader, but just logically thinking. I am assuming the Oil filter for this SUV is located in a place where those skid plates don't have to come off to change the oil? ARB does indeed make some cool stuff, keep rocking Girlie👍
Okay, I love this chick. 🥰😂
One of your best videos Sarah, I don’t have a bronco but put some Toyota plate on my Taco. Your humor and knowledge is a treasure.
Thank you Sarah for explaining how to install and why you should do things in a certain way. Great content!
Overhead arm work out courtesy of Australia 😊
ARB does make great stuff. Looks great and rugged! No pooping around with that! poor rocks will meet their match!
Awesome job looks well armored underneath. Great information segment, Sarah.
Those ARB pieces are so sturdy it seems like they can act as frame stiffeners. I wonder if you will notice a ride quality difference over bumps/cornering.
Pokey is looking 🔥! Bulletproofed. Awesome how strong you are, heavy weights, tools, and torquing bolts all day overhead. Well done !
It's 26% increase in thickness from factory to ARB.
Hi Sarah! I I watch your videos, in the mornings, having my coffee, and I laugh so much, because the words are coming out of your mouth is so freaking funny. Just makes my day. Keep them coming!!!
Why do we love your chaos so much? I’m not sure but I won’t ever stop watching ya. You’re the best
A skunk is a mammal and can therefore be milked. A platypus gives milk but also lays eggs - that makes it the only animal that can make its own custard.
Love ya car!
"Id like to meet my little mule" ..quote from the movie "Romance in the stone".
The little mule was the wildest Ford Bronco.
Definitely a dream car from when I was a kid.
So happy for you
I love what you did on your bronco. Perfect style. Definitely like it better without the tent rack off.
well looks like thats put 100 plus kg on pokey horse be interesting to see what the mpg comes down to with these h/d protectors
Haha, you and Autoedits Jason on the OCD chassis cleanliness. You two probably have the cleanest vehicles on RUclips. He's done the Rubicon and other hard trails in his 8-year-old Wrangler, and it still looks like it just rolled off the showroom floor underneath. I'm over here in the Northeast trying to keep my 4Runner from rotting away, super jealous of the clean undercarriages you can maintain out west.
That was pretty ingenious of you to use the car lift and a couple of boards to help remove the roof top tent.
Love your Bronco content! And I appreciate the Rays TE flex.
Nice to see your Bronco front & Center again. Have more of them! wow those are some nice bash plates by ARB
“Lift with your ass!” is up there with “Safety third!”
You do whatever you want. This makes sense out there in Arizona. You could accidentally run off the road. Your vehicle is protected.
Yes there are other off road acc companies. ARB are not cheap, they put a lot into R&D. The testing is incredible. It depends how serious your off road habit is. In a nutshell. "ITS TUFF SHIT"
Loving the bronco content Sarah!!!
Nice “clean” install Sarah, you made it look easy. 👍🇺🇸
That Bronco is a beast! Wonderful upgrade/mod!
Now it is time to put some scratches on those new skid plates.
Never too old to smash bubble wrap. :)
words to live by
Flipping the Tyres over will rendering the apperience that much cooler......
I am delighted to hear your admission regarding your sense being common. I must confess that I suffer from a similar affliction.
Profound step up. I couldn't believe the difference!
nice additions great install....nice grinding at the finish.
That skid plate system looks so much better. I like the ARB better than other ones I've seen too, seems like it has better coverage.
Buying car from you would be a sure win. You clean so much it would live forever.
Brilliant work as always Sarah, greetings from Greece!
Arb is great stuff. Pokey is getting all beefed up nicely 🔥🔥
Clever way to get the roof top tent off. It what we come to expect, Uber clean Sarah
I put skidplates ( Real ones made out of thick metal ) on most of my lowered cars just in case. There have been a few occasions when I have tested them unintentionally so I'm glad I have them.
It looks great and a lot more rugged!
I love and enjoy your sense of humor! 💚💚💚🇨🇦
Looks great. Great work.
Awesome look with real world quality toughness! For my OCDness, I'd recommend getting the gas tank plates powder coated to match! Just to make the underside look symmetrical.
Sarah you Lady are a Total Trip! I enjoy watching you and moreover, listening to your babling! Truly a "trip," A Road Trip! Love'n it! J
Notably, great editing and sound track. Well done.
Knolling the nuts and bolts. This is the way.
Love it as usual ❤ looking great as usual Sarah
I love the way you get your snickers in a knot over simple Cadbury
G'day Mate well done Sarah. I have ARB on my Jeep here in Australia
great looking ARB under frame armor thanks
Hi, You did gymnastics and muscled your abs to dismantle your roof tent alone, impressive. Pokey is ready to face the wilderness.
Big brain energy right off the bat!
How is your manual transmission holding up? I love mine but it seems like my transmission and 75% of the rest of the 7mt’s have a terrible sound in N, 1st, and 2nd.
I’m going to get it looked at but I’m just glad that Ford offered a manual!
My RUclips feed is showing 6-9 Sarah videos and hardly anything else. I like it!
To answer the question you posed at the 4:12 mark, the ARB plate is about 21% thicker than the oem, per your measurements.
Dang... no treatment on the skid plates before installation??? Oh my.
I was at the Brussels motor show last week, the Bronco is now also available in Europe.
Can't wait to see you test out those bash plates 👍🏻
Love that you clean under you Bronco !! ❤❤❤
That's some very impressive hardware!
Great job, Sarah. 🙂🙃🙂🐧🐧🐧🐧🐧🐧🐧
That's some beefy unwanted Hamburger Helper! Some serious armor plating when teetering on a boulder at Moab, or -looking cool at the Dew Drop Inn-. Loved the chassis filming style. Nice R&R improvements and general Horseplay!
Great improvement.