Ron and crew thanks for the professional videos.these are great family friendly videos ! Very little if any bad language . As a dad i really appreciate that part!
@@fhuber7507 most towing companies let the thing smash to the ground I also love seeing Ron gently and carefully set it down. This truck is part of a business. If it were a wreck and the vehicle is done for, if it were to smash down it won’t matter. Always though, towing companies should be careful. Smashing something down can also cause more problems. More mess to clean up is the main
So sorry for your loss, Kenny. God be with you and your family. Great to see the younger generation learning from you, Ron. They are fortunate to be learning from you. Looks like lots of critters will eat well for a while. Stay safe and God bless.
I have started to attempt to predict how you will rig. Sometimes I get it right. I have learned a lot from your videos. This one had me puzzled especially when you ran the front cable over a snatch block. It wasn't until the side pull started that it all came clear. Neat way to rig. Thanks for another fascinating episode.
I'm new to the channel, but I have great respect for you. My husband is a trucker.. Thank you for what you do! Sorry for all of you all's loss. I lost my father in February, so I understand. God Bless y'all!
Fortunately that's farming country so the deer are used to eating corn in winter. Otherwise if deer don't eat corn in winter but are grazing on tree bark and twigs too much grain can cause acidosis which can lead to dehydration with the deer drinking water but their gut is unable to absorb it.
Ron you have a great crew. You’re a great teacher of your team. Please send Kenny and Dalton our prayers and condolences for the loss of their Mother/Grandmother. May God bless and keep y’all safely wrapped in his loving arms.
It's great that you have a well seasoned crew that can get things done without asking you every step of the way And I'm sorry to hear about the passing of your loved ones
Love watching your videos, I’m becoming a tow truck driver next week and watching your videos is giving me a little bit of understanding of it all. Thank you for posting these!
Ron , I never tire of your videos , the are always done professionally , your work ethic is brilliant and your team are fantastic , I always push the like button before I watch the videos because I know they are going to be good ,, you never disappoint me and I look forward to them ,. I have deep respect for you not showing the fatal crashes as I think it shows poor taste by the ones that do , keep up the good work and as always GOD BLESS ,
I am a retired LEO and I never liked any collision, especially the fatalities, but it was my job to be there. I appreciate Ron's care and respect for everyone.
I am sorry you boys lost loved ones. Even in times of stress, I think it is great you make every tow a learning tool for your team. 💚 God bless you all.
You're going to see does dropping twins this next year. I miss seeing Talon and Raymond but like seeing the newer crew members coming to speed. Having watched almost all your videos, I generally know what you are going to do, how you are going to do it, and with #11, where the required rigging is on the truck. This was a new trick. Good show! Have to remember this one. No extra damage to the truck. Best wishes to all the crew and condolences to all that lost someone. Hope there are no more loses for awhile.
Good morning, Ron & crew! Happy New Year and my condolences to you, Kenny, Dalton and your families for your losses of loved ones! Prayers of comfort & peace going out for you as you continue to grieve their passing. Thank you for another entertaining & informative video! God bless you & yours in 2022!
Kenny so sorry for the loss of your Mom. The loss of a parent is a big one. Dalton sorry for your loss of your grandmother. It is so nice to see y'all back at work together.
I'd say that flip was about as perfect as it could be with out doing a catch, and it's always nice to see that the flip only takes 20 seconds because the set up was done properly in the first place
Ron, I know how you have suffered recently and would like to join with you in offering my condolences and deepest sympathy to Kenny, Dalton and all their families for their terrible loss. May God be with them and give them peace.
Hi Ron so sorry for everyone's loss and sending prayers to all. I am watching your videos from The Villages Florida and really enjoy learning from them.
Ron, you now have quite the crew. You will have your hands full keeping them on the straight & narrow road to a safe & successful recovery. From what I see, you are on top of your game.
We've had that morning fog in October and November we are by a river that where the moisture comes from. the scary part was the morning it actually was frozen on windows which means a bit froze on pavement and bridges. Nice to see your videos as always.
Ron always remember you are loved because you are child of God, not because of your earthly parents. And it’s all right to struggle because of your loss, it just tell you how great your love was. Death is not normal for human, but came into the world because humans wanted to be gods. Condolences to Kenny because of his loss. Thank you for sharing your story. God bless you, your team and your family.
I’m behind on your videos and I’m sorry to hear about your father passing away, somehow we miss our dad’s more than our mothers. I hope he’s in a better place now, someday you’ll be together again. I thoroughly enjoy watching you work and figure out how to get things done.
Ron that is one heck of a mess and lucky no one was hurt in the accident and you and your guys work great as a team and communicate with each other and God Bless you and your family and friends and be careful and safe and may the force be with you.
Condolences from my family to yours and Kennys. With all of the corn that'll be left even after the cleanup, I wonder how many car vs deer crashes you'll get called to in that spot over the next few months. As always, be safe and God bless you, your crew and your equipment.
Kenny and Dalton. Sorry for your loss. Praying for you all and also Ron for his recent loss. Hey you guys did an exceptional job on this recovery, as usual. Take care and have a good one 👍👍👍❤️
Haven't seen any of your videos in a while. Sorry to hear about your Dad and Kenny's Mom passing. I pray this year will be a better year for all of us. Great video.
I miss those foggy mornings down in that part of Missouri. My grandparents were from and lived in the Luttzeville/Marble Hill area. That is beautiful country down there.
Ron you do know what a supervisor job is right lol. Your a hard worker Ron just like your dad he didn't know what a supervisor job was just like you he was and is right in the thick of it. God Bless
Thank you for your videos. My wife Evelynn passed away last Week. We were married 51 years having your videos to watch helps keep my mind from her funeral in 2 weeks thank you
So sorry for your loss Kenny and Dalton. Praying for you and your family. May God be with you and your family. I will be saying prayers for your family.
I remember my time in the very first 40 ton nrc sliding rotator with 4 winches. Its cool when pulling up to a scene and the brain is already goin and u can already visualize the rotators position and the roll its going to play as the star of the show. Kids wanting brochures of the truck and asking for it to be autographed really got me every time. If they stuck around till the end id always show em around the truck. U cant buy moments like those in life.
Thank You for the video's you are teaching by example how to address the entire incident. That is the best way of teaching others how safety is the number one chore....
Found your channel a few weeks back. Have been enjoying the videos. I have some family members that are in the towing business and had a young cousin that was planning on opening his own business but was killed in a car accident last year. Keep up the good work. Stay safe and God bless.
Dude I love watching this channel I've always been a fan of like big trucks you know semis and tow trucks and whatnot and also always wondered how you guys do things this is a really good channel
I'm always impressed with your work ethic you are very calm in everything you do, you take pride and time to make sure everyone is safe , As most people I to am sorry for your lost and Kenny lost , God bless you and your family and everyone who works with you
Thank you very much for the positive comments and your condolences. It has been a tough couple of months for our crew, but we are moving forward. Thank you for watching and God bless.
Kenny and Dalton, my prayers are with you for the loss of your Mother & Grandmother. Ron, you are an "OAK". Stay safe my friend as you teach these guys the right way to a safe & perfect recovery.
Hey Ron so sorry to hear about your dad he was a good man who taught you well may he Rest In Peace your family is in my prayers and keep up the good work you know he would and keep doing what you do keep your head up high we love you
Hi Ron!! I love your rescue videos!! You do a great job everyday!! New subscriber here and I forward to seeing your new content. It's the highlight of my day. ✌🏽
There have been far too many recently, in my opinion. However, in God's time and for His purpose. It is not for us to understand. Thanks for watching and God bless.
Hi Ron, thanks you for all your video, it's awesome to see your job close like this . But it also scaring to see all driver who they don't care about towing, first responder and other. I juste discover your video last week. Thanks you. By the way i'm sorry my english is not the better one, I'm living in Québec canada and my first language is French. Take care on the road and god bless.
Ron you made that look way to easy . I worked on a wrecker with a man in Booneville KY back in the day before rotators were out an it was not a easy job running drag lines for snatch blocks one of the most dangerous jobs I have ever done an I worked with explosives for a living in construction after that an from my experience it was safer then the wrecker carrier aspect everyone has to be aware of what going on in their surroundings for sure . But your videos are always so interesting to watch stay safe an be careful brother .
Please tell Kenny and Dalton that I am so sorry for their loss. I still think of things that I'd like to ask my mother. I hope that they can support each other as they grieve. I pray for God's blessings on them.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Ron and crew thanks for the professional videos.these are great family friendly videos ! Very little if any bad language . As a dad i really appreciate that part!
Thoughts and prayers to Kenny and Dalton. Ron, you and your family remain in my prayers.
Condolences to you for your dad and Kenny's Mom and Dylan's Grandma.
Ron is such a professional that when it does roll back onto it's feet its almost an anti-climax. No fuss, no drama.
So many roll-over righting videos by others, they bounce it so hard they lose control.
Ron sets it down like he actually cares.
Pure professional.
@@fhuber7507 most towing companies let the thing smash to the ground I also love seeing Ron gently and carefully set it down. This truck is part of a business. If it were a wreck and the vehicle is done for, if it were to smash down it won’t matter. Always though, towing companies should be careful. Smashing something down can also cause more problems. More mess to clean up is the main
Condolences to you Kenny and Dalton for your los
I lost my moms moms grandparents
Touchdown.. Alright... Break'er Down Guys. Gitter Dun.
Mad Luv N Respect As Always 🐺
Sorry for your loss Kenny and Dalton. look after yourselves out there everyone
He
So sorry for your loss, Kenny. God be with you and your family. Great to see the younger generation learning from you, Ron. They are fortunate to be learning from you. Looks like lots of critters will eat well for a while. Stay safe and God bless.
I have started to attempt to predict how you will rig. Sometimes I get it right. I have learned a lot from your videos. This one had me puzzled especially when you ran the front cable over a snatch block. It wasn't until the side pull started that it all came clear. Neat way to rig. Thanks for another fascinating episode.
I'm new to the channel, but I have great respect for you. My husband is a trucker.. Thank you for what you do! Sorry for all of you all's loss. I lost my father in February, so I understand. God Bless y'all!
Boy are the deer going to get fat, I’ll bet they are going to tell
every deer in the surrounding areas come &get it!, (lol)
Yeah. It'll be "Hey, we got a party going on over here. Belly up to the bar boys.!"
Fortunately that's farming country so the deer are used to eating corn in winter. Otherwise if deer don't eat corn in winter but are grazing on tree bark and twigs too much grain can cause acidosis which can lead to dehydration with the deer drinking water but their gut is unable to absorb it.
All you can eat buffet for deer
They will probably come in with a vac and suck up everything that isn't in the water.
Made me sad to hear about Kenny's mom. I cried. Prayers to all. Nice to see the young men learning a trade.
Ron you have a great crew. You’re a great teacher of your team. Please send Kenny and Dalton our prayers and condolences for the loss of their Mother/Grandmother. May God bless and keep y’all safely wrapped in his loving arms.
Wonderful to see professionalism in action, as per all your videos! Most enjoyable!
A-Maize-ing work on this job!
Love the "corn" reference. Smile.
that's kinda corn-y isn't it ? 🤔😷😃😜🤪👍😎
Cute
Thats so bad its corn-y
Pfunny! Very very pfunny!! 🤣🤣🤣
It's great that you have a well seasoned crew that can get things done without asking you every step of the way
And I'm sorry to hear about the passing of your loved ones
So very sorry for your loss, and for Kenny and Dalton's as well. Sending prayers for your strength.
Love watching your videos, I’m becoming a tow truck driver next week and watching your videos is giving me a little bit of understanding of it all. Thank you for posting these!
Best of Luck!!!
Ron , I never tire of your videos , the are always done professionally , your work ethic is brilliant and your team are fantastic , I always push the like button before I watch the videos because I know they are going to be good ,,
you never disappoint me and I look forward to them ,.
I have deep respect for you not showing the fatal crashes as I think it shows poor taste by the ones that do ,
keep up the good work and as always GOD BLESS ,
I am a retired LEO and I never liked any collision, especially the fatalities, but it was my job to be there. I appreciate Ron's care and respect for everyone.
watching you make that 100 point turn reminded me of an old trucking song. "Gimme 40 acres to turn this around " 😆
Thoughts for you and your family Kenny!
I am sorry you boys lost loved ones.
Even in times of stress, I think it is great you make every tow a learning tool for your team. 💚 God bless you all.
You're going to see does dropping twins this next year. I miss seeing Talon and Raymond but like seeing the newer crew members coming to speed.
Having watched almost all your videos, I generally know what you are going to do, how you are going to do it, and with #11, where the required rigging is on the truck. This was a new trick. Good show! Have to remember this one. No extra damage to the truck.
Best wishes to all the crew and condolences to all that lost someone. Hope there are no more loses for awhile.
Condolences to you Ron ,Kenny, Dalton and your families with the loss of your loved one. May peace find you each of you.
Good morning, Ron & crew! Happy New Year and my condolences to you, Kenny, Dalton and your families for your losses of loved ones! Prayers of comfort & peace going out for you as you continue to grieve their passing. Thank you for another entertaining & informative video! God bless you & yours in 2022!
Ron my brother in Christ
By the way Ron what did you name tater?
Sorry for your huge loss Ron and sure your Dad is right there beside you at all times
I’m so glad that you like to talk to keep us informed about what you are doing
Nice job righting the truck. It was very gentle and didn't add to any damage. Well done!
Thanks for watching and God bless.
Kenny so sorry for the loss of your Mom. The loss of a parent is a big one. Dalton sorry for your loss of your grandmother.
It is so nice to see y'all back at work together.
I'd say that flip was about as perfect as it could be with out doing a catch, and it's always nice to see that the flip only takes 20 seconds because the set up was done properly in the first place
Greetings from India.🇺🇸🇮🇳
Roon you are number one..professional..please keep sending movies..tank you👍🏼
Greatly appreciated. Thanks for watching and God bless.
Another Friday, Another Coffee, another Lovely video from Ron Pratt.
Please convey my condolences to Kenny and Dalton for the loss of their Mother/ Grandmother
Text book roll set just perfect well done, good to see how well all your crew work together.
Ron, I know how you have suffered recently and would like to join with you in offering my condolences and deepest sympathy to Kenny, Dalton and all their families for their terrible loss. May God be with them and give them peace.
Hi Ron so sorry for everyone's loss and sending prayers to all. I am watching your videos from The Villages Florida and really enjoy learning from them.
Entire crew worked like a well oiled machine . Excellent work , y'all !
They're fascinating to watch, aren't they!?!
Sending prayers to Kenny, Dalton and their families. God bless the entire MidWest Truck crew.
Ron, you now have quite the crew. You will have your hands full keeping them on the straight & narrow road to a safe & successful recovery. From what I see, you are on top of your game.
Thank you. I am grateful for our crew and the hard work they put in. Thank you for watching and God bless.
We've had that morning fog in October and November we are by a river that where the moisture comes from. the scary part was the morning it actually was frozen on windows which means a bit froze on pavement and bridges. Nice to see your videos as always.
One of the best videos in a long time. Just a bunch of guys working together and getting the job done. This is what it’s all about!!
Sorry to hear of loss and great job u do prayers for all
Ron your a great teacher on how to recover everything
Thank you and God bless.
Ron always remember you are loved because you are child of God, not because of your earthly parents. And it’s all right to struggle because of your loss, it just tell you how great your love was. Death is not normal for human, but came into the world because humans wanted to be gods. Condolences to Kenny because of his loss. Thank you for sharing your story. God bless you, your team and your family.
I’m behind on your videos and I’m sorry to hear about your father passing away, somehow we miss our dad’s more than our mothers. I hope he’s in a better place now, someday you’ll be together again. I thoroughly enjoy watching you work and figure out how to get things done.
Ron that is one heck of a mess and lucky no one was hurt in the accident and you and your guys work great as a team and communicate with each other and God Bless you and your family and friends and be careful and safe and may the force be with you.
Sorry for your loss Kenny and Dalton and families 🙏.
Nice winters day, good to hear no serious Injuries 👍
Great work all, thanks for sharing
Condolences from my family to yours and Kennys.
With all of the corn that'll be left even after the cleanup, I wonder how many car vs deer crashes you'll get called to in that spot over the next few months.
As always, be safe and God bless you, your crew and your equipment.
as a former tow op, i love to see your young staff clean up. I'd definitely have Eli out helping more too.
Kenny and Dalton. Sorry for your loss. Praying for you all and also Ron for his recent loss. Hey you guys did an exceptional job on this recovery, as usual. Take care and have a good one 👍👍👍❤️
Of course there are hard times in everybodys life, but don't forget, the sun will be shining again, too!
Lost my father a year ago, too...
Love from Morocco ❤
Ron great video, the biggest crew you ever showed! Great to see your son again! Thanks for sharing! Kevin
As always! Very professional work. That's why I enjoy these videos
Nice work 👍
You all do good work, I like watching you work and your attention to saftey and the Details!
That's a good way to do the front end, I just learned something, God bless you and your family!
Haven't seen any of your videos in a while. Sorry to hear about your Dad and Kenny's Mom passing. I pray this year will be a better year for all of us. Great video.
I miss those foggy mornings down in that part of Missouri. My grandparents were from and lived in the Luttzeville/Marble Hill area. That is beautiful country down there.
RON, Cut away from you!, I was on edge at 19:49, never a dull moment in your vids Ron!
Ron you do know what a supervisor job is right lol. Your a hard worker Ron just like your dad he didn't know what a supervisor job was just like you he was and is right in the thick of it. God Bless
Happy New Years to you Ron and your family. Prayers for all of your guys who lost love ones. Thank you for the wonderful video.
Kenney we feel for your loss. And will pray that you will feel better in time. Take care, Sir, and please be safe
Good morning Mr Ron enjoy your veidos your a awesome teacher very polite to your staff stay safe and God bless
That was a cool up-righting. Great video Ron.
Thanks for watching and God bless.
Nice tidy roll, it's all in the prep. Sorry to hear of your loss Kenny and Dalton.
Thank you for your videos. My wife Evelynn passed away last
Week. We were married 51 years having your videos to watch helps keep my mind from her funeral in 2 weeks thank you
Kenny sorry for your and your Family's loss, Wishing You ALL Nothing but the best.
Good morning Ron hope you have a wonderful and Blessed day
Good morning. Thanks for watching and God bless
So sorry for your loss Kenny and Dalton. Praying for you and your family. May God be with you and your family. I will be saying prayers for your family.
Thanks for watching and God bless.
I remember my time in the very first 40 ton nrc sliding rotator with 4 winches. Its cool when pulling up to a scene and the brain is already goin and u can already visualize the rotators position and the roll its going to play as the star of the show. Kids wanting brochures of the truck and asking for it to be autographed really got me every time. If they stuck around till the end id always show em around the truck. U cant buy moments like those in life.
Great Boss Man!!! Great recovery....
That worked real slick Ron! You can sure see where Ethan's heart is! He was right there as soon as his finals were done.
Thank You for the video's you are teaching by example how to address the entire incident. That is the best way of teaching others how safety is the number one chore....
Time for lunch with Mr Ron. Yum yum!
David in the UK.
Good morning, or lunchtime. Thanks for watching and God bless.
You and Josh from Pepe's Towing make this look so easy.
Found your channel a few weeks back. Have been enjoying the videos.
I have some family members that are in the towing business and had a young cousin that was planning on opening his own business but was killed in a car accident last year.
Keep up the good work.
Stay safe and God bless.
Never a dull day Ron.Keep up the good work.
U and ur guys did a awesome job on the recovery and be safe and always be careful doing what u do
Fabulous job! I’m always so amazed at how you just pull it all together.
Sorry for your loss. Glad to see you back with your always interesting videos. Keep up thr good work!
Good to hear the driver is okay.
Stay safe and God bless.
Kenny and Dalton....I'm so sorry for your loss. Hugs and prayers.
Very sorry to hear about your loss
Sending good thoughts and well wishes to the driver. Also prayers good thoughts and well wishes to Kenny and his family. God bless!
Dude I love watching this channel I've always been a fan of like big trucks you know semis and tow trucks and whatnot and also always wondered how you guys do things this is a really good channel
I'm always impressed with your work ethic you are very calm in everything you do, you take pride and time to make sure everyone is safe ,
As most people I to am sorry for your lost and Kenny lost , God bless you and your family and everyone who works with you
Thank you very much for the positive comments and your condolences. It has been a tough couple of months for our crew, but we are moving forward. Thank you for watching and God bless.
Kenny and Dalton, my prayers are with you for the loss of your Mother & Grandmother. Ron, you are an "OAK". Stay safe my friend as you teach these guys the right way to a safe & perfect recovery.
Thank you and I will share that with them. Thank you for watching and God bless.
You are an excellent trainer/instructor as well as a professional rigger.
Thank you so much! Thank you for watching and God bless.
Hey Ron so sorry to hear about your dad he was a good man who taught you well may he Rest In Peace your family is in my prayers and keep up the good work you know he would and keep doing what you do keep your head up high we love you
Sorry for your loss Kenny and Dalton
Just a bunch of great guys. Thanks
Thanks for watching and God bless.
Glad driver ok . Awsome job . Wish you blessing and be safe at work. I used to drive tow truck but now fighting cancer keep safe at work.
Another great job, a true professional at work.
Hi Ron!!
I love your rescue videos!! You do a great job everyday!!
New subscriber here and I forward to seeing your new content.
It's the highlight of my day. ✌🏽
Welcome. Thanks for watching and God bless.
Prayer for all who have lost someone near to them this last few months.
There have been far too many recently, in my opinion. However, in God's time and for His purpose. It is not for us to understand. Thanks for watching and God bless.
Im surprised 😮 that you didn't have to pull the FIRE TRUCK ! It looked like he was a little too far back? GREAT Video as always MIKE!
You are such a good person Ron. Your employees are lucky to work for you
Hi Ron, thanks you for all your video, it's awesome to see your job close like this
. But it also scaring to see all driver who they don't care about towing, first responder and other. I juste discover your video last week. Thanks you. By the way i'm sorry my english is not the better one, I'm living in Québec canada and my first language is French. Take care on the road and god bless.
Always thank you
As usual, great job.
Great video.
Ron you made that look way to easy . I worked on a wrecker with a man in Booneville KY back in the day before rotators were out an it was not a easy job running drag lines for snatch blocks one of the most dangerous jobs I have ever done an I worked with explosives for a living in construction after that an from my experience it was safer then the wrecker carrier aspect everyone has to be aware of what going on in their surroundings for sure . But your videos are always so interesting to watch stay safe an be careful brother .
Please tell Kenny and Dalton that I am so sorry for their loss. I still think of things that I'd like to ask my mother. I hope that they can support each other as they grieve. I pray for God's blessings on them.
Nice work Ron