Tuning the Torqhead 24X Camaro - Using HP Tuners to tune the 1994 Camaro Z28.
HTML-код
- Опубликовано: 27 окт 2024
- In this video we tune the 1994 Camaro with the Torqhead 24x using HP Tuners.
#lsxmotorsports
LSx Motorsports
How to set up MAF Tuning
• GM Gen 3 Mass Airflow ...
How to set up SD Tuning
• GM Gen 3 Speed Density...
9:10 2nd gear scratch🤌🏻….I miss my 4th gen!
Well I love 4th gens too but I guarantee that after driving one for about 5 mins you would be glad to get back into your 6th gen.lol.
@@LSxMotorsports2021 noooo
Respect ! Will torque head work on a 93. I know they sell 94 an up kits ..but i heard u can do it no problem but no details ..i gues it would take wiring into the 93 harness ? Or is there other kits for 93 ? Any help would be greatly appriciated !
Well I know the 93 cars didn't have a Mass air flow sensor and the computer still uses the old eprom chip. I suspect you would probably need a wire harness from a 94-97 car but really don't know for sure unfortunately. Best advice would be to send torqhead an email and they should be able to tell you everything you need to do.
What's the button where the power lock switch should be?
This car is a stripped down car. Has roll up windows and no power locks. There is a tweeter speaker where the power window and door lock buttons would normally be.
What is needed to tune a 94 z28 by yourself? Looking to learn how to tune and read the way it runs
Well the easiest way is to use HP tuners but that requires getting the Torqhead kit which cost almost $3000 Canadian and the hp tuners cost almost $500 Canadian and a couple credits cost $140. Going with HP tuners you can then go to Goat rope garage to learn how to tune using HP tuners . The cheaper way is to use a couple programs that are cheap or even free now but they are a little more complicated and I am not sure the names but you can find out everything you need on the channel Strong speed works. I was going to go the cheaper route but the guy with the Black 94 Z28 on the channel was having a lot of problems with the Opti spark so he bought the torqhead kit so I was able to use HP tuners. Good luck whichever route you take. It may seem very confusing to use this stuff at first but it can be done with enough watching videos here on RUclips.
@@LSxMotorsports2021 sounds great thanks for the information!
I can’t for the life of me get the MAF sensor to work , I have tried and watched the same Goat Rope video as you and it’s not switching and populating in the cells … what do you have ?
The car originally had a aftermarket sensor which was not working properly and the heating sensor was burned up. We switched it to the original stock sensor and then everything worked properly. The only thing I can tell you is go through the procedure of setting up the MAF histagram again maybe you missed something. I am assuming you have the torque head 24x and the car is starting and running properly?