I got mine a few weeks ago just to be able to see what was going on under the hood of my F150 which I bought used from the dealership with a Tune. It’s my first time with any sort of tuner but I felt comfortable enough pulling the trigger because of people like you providing these incredible insights. Keep up the fantastic content.
Old video I know but I currently have the 2, and would like to datalog for when the young drivers are alone....😊 Can I do this with the 2, or do I need the 2+? Have you done a video on stand alone datalogging? Will try to hit you up on the next live show...take care.
The only guy on youtube I feel like commenting on, what you do is much appreciated man I wouldn't be able to move on with my project without it. Wish I had money to give you lol, hope you know how much you help people man.
Bought one and love it. Got it a few weeks ago. Had a problem with mine, support was amazing. Brian responded faster than I sent messages lol. Track Addict and race render are amazing as well. Its about 60 bucks for the "ultimate" edition, not that expensive, amazing features.
Hey there! I am looking to get a HP tuner and wideband AFR, how in the world do I integrate the Wideband into the HP tuner with my 2002 GMC Sierra that does not have Can bus? Thank you!
I have watched your tuning about the Terminator a while back and I appreciate your insite and help. I just bought the new MPVi3 and am trying to see cam and crank position not running, key on. Is this possible? I am working on a 2010 5.7 hemi. thanks, Keith
Only thing that sucks is when brought out the updated vcm suite. They didn’t tell everyone that they don’t have there fully supported vehicle lists set
Just purchased one of these as well.. for sure a beginner but I have done a little tuning with piggybacks and diablosport but this is completely new. Will be tuning my 2014 ZL-1 with a few bolt-one. I just purchased the pro-link cable and I want to run it to my Aeroforce Scan gauges wideband but not a lot of info on that out there.
I almost ordered my first MPVI, and I wanted MPVI2+ luckily it wasn't in stock, now I have for MPVI3 to be in stock in Europe as there is none here yet
I'm old school, this is my first scanner/ tuner. Starting to get into it, Looking for a place to find Base Logs. gen 3 and 4's . Just want to understand where things should be versus where they are. any suggestions?
Do you need the prolink+ cable to log wideband if you have the AEM 03-0300 and a newer car with canbus? Put another way, can I simply connect the AEM wideband CAN H,L wires to existing canbus line and the MPVI3 will be able to pick it up?
Might just have to swap up come Dec. Really need to look into that start stops logging. I've just been leaving the laptop in recording while making passes. Unfortunately spun 2 bearing, but gives me some time to do some learning 😁
Great video man, I was going to upgrade my MPVI2 to the MPVI3 the other day but as of right now HPTuners website says upgrades are currently not available unfortunately. Not sure why, haven't heard anything. But I knew I should have jumped on it a few months ago. BTW, Just upgraded from 3.73's to 4.10's with a Detroit Truetrac. Think the Trans Trans Tool by Bluecat is sufficient enough? I've used it before without issues. But that was just for changing tire size. As a side note, my MPVI2 came with a USB Drive that attached my HPTuners keychain to. Because for sure that would vanish without a leash..lol
looking forward to more content with this. I'm considering upgrading if it makes getting the wideband setup a lot easier for a gen3 5.3...using the adapters, usb cables to serial is such a hassle. Is it also easier to setup in HPtuners?
Man I almost ordered a 2 plus right when the 3 came out but I’m still using the 2 and it’s doing it’s job up to around 180 credits . But thank you brother I’m jealous . Oh yeah I had to move and stay with the stable had some crazy issues on a customers project. So that’s good advice but the beta is cool . I miss it lol .
Still got a 1 right now Was gonna go to 2+ but if it don't include the pro link features maybe I should do 3 .. not to sure I understand. Does the 2+ and 3 both come with free pro link feature?
Purchase his layouts also. It makes it easier to follow along. You will have a real good base to start with. Then do yourself a favor and read everything you can about tuning.
Also if you don't mind paying for the patreon he can help you if you get in a tight on tuning. I did a high overlap cam with a very low LSA which most people say is a b@stard to tune. A few emails with tune files and logs and Kyle had me in the right area.
Love your videos man! They are very informative and help tons! I am going to have to get one I guess because my mpvi2 that I used 4 or 5 times quit working and hp tuners told me that there is nothing they can do and I have to buy a new one and they wouldn't help me. I can't afford a holley terminator x or I would be going with that. So in my opinion if you can afford holley definitely get that instead of hp tuners!!
Got my MPVI3 and it is a paperweight. Unable to read/write to my PCM. Unfortunately, package is open so it is not returnable. Customer support recommends that I purchase a GM Tech2 or a J2534 device (about $600) to flash my PCM so that I can use their product to...flash my PCM. With the amount of people on the forums seeing a "Detect Protocol Failed" error, you'd figure they would address it.
You can refresh the interface and it works fine? When I get a detect protocol failure I usually swap usb ports or reboot the computer and it goes away. I’ve noticed issues on newer vehicles can also be solved by making sure you have a good connection to the internet when trying to read or write.
Do you have any experience tuning Ford with HP? Specifically mod motors? I've been watching your videos for a few weeks now after finding you channel and its been a great help to me, but not everything from the Chevy platforms directly translate to Ford. Currently working on trying to figure out my high idle issue I've been dealing with. Thank you for the great content for those of us trying to learn!
How much to unlock and base tune my new motor with a cam, intake and exhaust? I have the new hp tuners mpvi3 and the 0411 is from eBay and it’s from a suburban and it’s going in my swapped 95 Trans Am
I am confused on how HP tuners works, do you buy the dongle and then have to pay for credits to HPT to flash your ECM for any changes. I have a H2 and I was gonna get this to hook to a laptop and turn the fans on in the ECM. Not sure if that would be something I could do for free with the tuner dogle?
Purchased an hpvi2 a while back and purchased a few universal credits but cannot get it tune my 2004 silverado 5.3.... I need to also delete vats out of a 2005 silverado 5.3 ecm for a project but cannot get it to. It reads codes and shows the live data but other than that I can't do anything. Any help would be greatly appreciated
What do you charge an old disabled man like me to unlock and base tune for a cam, intake, exhaust to get me started? I just refreshed the motor and added those mods. The ecu is from eBay and it’s an 0411 ecu. Thanks!
Bud i love your videos and you have helped me tremendously and i appreciate it but did you get paid for ths haha, the 3 loses ford eecv and couple other things, ghe only thing i see is the no laptop logging with accelerometer, its like snap-on update to vehicles that are warranted to lose older stuff you need
I would love to upgrade but until they do an upgrade program like they did with the 2, it's not going to happen. And if they never do that, I guess I'll use my 1 Pro until they don't support it anymore.
New software 5.x update removes emission deleting capabilities and ability to turn rear o2 post cat sensors and a few other things. So if your doing LS swaps or such things. Be warned... Lucky I keep all my downloads and could revert back.
I'm actually really annoyed that Pro is included now, I worked hard to be able afford the prolink set for the mpvi2, now it's completely pointless, I could have waited a couple more months and got an mpvi3 Also, does the standalone data logging retain the correct time and date now? It was pretty hard on the 2 to navigate what logs were what, as all the dates were in 1980, and out of order
😂 the mpvi3 don’t work with TDN app in iOS 16.0.2 devices. Confirmed with HPtuner Customer service department. A blue/gray paperweight in my storage box after they refuse refund because the device work in PC. 😂😂😂😂
Have you checked out tunertools to see if they have released additional "classes"? I still have only one available to me at this time, which I completed...
hi,bro....im from malaysia...for my local,many stuff of remap hardware or soft...But 1st look,im vry interesting about hp tune,and whan to know more about this think....but how¿🥲😅
I got mine a few weeks ago just to be able to see what was going on under the hood of my F150 which I bought used from the dealership with a Tune. It’s my first time with any sort of tuner but I felt comfortable enough pulling the trigger because of people like you providing these incredible insights. Keep up the fantastic content.
Thanks so much for the unboxing I am building a 2000 silverado right now and have been wanting to get into hptuners. Thanks for everything you do.
Answered most of the questions I had about the new interface. May have to go to the MPVI3 since I'm still using the 2 not the 2+
Old video I know but I currently have the 2, and would like to datalog for when the young drivers are alone....😊 Can I do this with the 2, or do I need the 2+?
Have you done a video on stand alone datalogging? Will try to hit you up on the next live show...take care.
The only guy on youtube I feel like commenting on, what you do is much appreciated man I wouldn't be able to move on with my project without it. Wish I had money to give you lol, hope you know how much you help people man.
Bought one and love it. Got it a few weeks ago. Had a problem with mine, support was amazing. Brian responded faster than I sent messages lol. Track Addict and race render are amazing as well. Its about 60 bucks for the "ultimate" edition, not that expensive, amazing features.
Hey there! I am looking to get a HP tuner and wideband AFR, how in the world do I integrate the Wideband into the HP tuner with my 2002 GMC Sierra that does not have Can bus? Thank you!
I have watched your tuning about the Terminator a while back and I appreciate your insite and help. I just bought the new MPVi3 and am trying to see cam and crank position not running, key on. Is this possible? I am working on a 2010 5.7 hemi. thanks, Keith
No, The way it resisters requires it to be running
Only thing that sucks is when brought out the updated vcm suite. They didn’t tell everyone that they don’t have there fully supported vehicle lists set
Just purchased one of these as well.. for sure a beginner but I have done a little tuning with piggybacks and diablosport but this is completely new. Will be tuning my 2014 ZL-1 with a few bolt-one. I just purchased the pro-link cable and I want to run it to my Aeroforce Scan gauges wideband but not a lot of info on that out there.
Thanks!
I almost ordered my first MPVI, and I wanted MPVI2+ luckily it wasn't in stock, now I have for MPVI3 to be in stock in Europe as there is none here yet
I recently got my MPVI3 but have not yet done much with it....but sure look forward to it.
Supercharged 3.6L Pentastar
Can you pm me your number. 2nd gen 3.6 pentastar caravan rt
What do you think about that Version 5 of HP tuners? Is that test you gotta take like a high school test? Lol.... i havent done the update yet
I'm old school, this is my first scanner/ tuner. Starting to get into it, Looking for a place to find Base Logs. gen 3 and 4's . Just want to understand where things should be versus where they are. any suggestions?
Is this similar to a N Gauge as far as reading parameters? Need something to keep an eye on my knock sensors
Do you need the prolink+ cable to log wideband if you have the AEM 03-0300 and a newer car with canbus? Put another way, can I simply connect the AEM wideband CAN H,L wires to existing canbus line and the MPVI3 will be able to pick it up?
I was kinda pissed that they were already selling a new model. Thanks for clarifying that. I didn't think about the chips at all.
Might just have to swap up come Dec. Really need to look into that start stops logging. I've just been leaving the laptop in recording while making passes. Unfortunately spun 2 bearing, but gives me some time to do some learning 😁
I got mine and I heard that I can download tune thru my smartphone to the mpv13, true ???😊
Great video man, I was going to upgrade my MPVI2 to the MPVI3 the other day but as of right now HPTuners website says upgrades are currently not available unfortunately. Not sure why, haven't heard anything. But I knew I should have jumped on it a few months ago. BTW, Just upgraded from 3.73's to 4.10's with a Detroit Truetrac. Think the Trans Trans Tool by Bluecat is sufficient enough? I've used it before without issues. But that was just for changing tire size.
As a side note, my MPVI2 came with a USB Drive that attached my HPTuners keychain to. Because for sure that would vanish without a leash..lol
looking forward to more content with this. I'm considering upgrading if it makes getting the wideband setup a lot easier for a gen3 5.3...using the adapters, usb cables to serial is such a hassle. Is it also easier to setup in HPtuners?
Man I almost ordered a 2 plus right when the 3 came out but I’m still using the 2 and it’s doing it’s job up to around 180 credits . But thank you brother I’m jealous . Oh yeah I had to move and stay with the stable had some crazy issues on a customers project. So that’s good advice but the beta is cool . I miss it lol .
I had my mpvi2 stolen is there anyway I can get my credits switched over to a new unit
Does this tuner kind of self to so i can work from that self tune?
have you been able to standalone data log with the MPVi3 yet?
Still got a 1 right now Was gonna go to 2+ but if it don't include the pro link features maybe I should do 3 .. not to sure I understand. Does the 2+ and 3 both come with free pro link feature?
Only the 3 has it free
I got one but know nothing about tuning!! I really need help. I did a cam swap in my sons 2010 Silverado big choppy cam.
Just follow the GRG videos. He has them listed from beginning to end. From one beginner to another. I've tuned a few vehicles now.
Purchase his layouts also. It makes it easier to follow along. You will have a real good base to start with. Then do yourself a favor and read everything you can about tuning.
Also if you don't mind paying for the patreon he can help you if you get in a tight on tuning. I did a high overlap cam with a very low LSA which most people say is a b@stard to tune. A few emails with tune files and logs and Kyle had me in the right area.
That is exactly what I did to my sons truck and now I’m so frustrated!!
Love your videos man! They are very informative and help tons! I am going to have to get one I guess because my mpvi2 that I used 4 or 5 times quit working and hp tuners told me that there is nothing they can do and I have to buy a new one and they wouldn't help me. I can't afford a holley terminator x or I would be going with that. So in my opinion if you can afford holley definitely get that instead of hp tuners!!
Got my MPVI3 and it is a paperweight. Unable to read/write to my PCM. Unfortunately, package is open so it is not returnable. Customer support recommends that I purchase a GM Tech2 or a J2534 device (about $600) to flash my PCM so that I can use their product to...flash my PCM. With the amount of people on the forums seeing a "Detect Protocol Failed" error, you'd figure they would address it.
You can refresh the interface and it works fine? When I get a detect protocol failure I usually swap usb ports or reboot the computer and it goes away. I’ve noticed issues on newer vehicles can also be solved by making sure you have a good connection to the internet when trying to read or write.
@@GoatRopeGaragehaving to connect to the internet while reading/writing is ridiculous, what are we writing on a cell phone now? 🤣
Do you have any experience tuning Ford with HP? Specifically mod motors? I've been watching your videos for a few weeks now after finding you channel and its been a great help to me, but not everything from the Chevy platforms directly translate to Ford. Currently working on trying to figure out my high idle issue I've been dealing with. Thank you for the great content for those of us trying to learn!
How much to unlock and base tune my new motor with a cam, intake and exhaust? I have the new hp tuners mpvi3 and the 0411 is from eBay and it’s from a suburban and it’s going in my swapped 95 Trans Am
Check out our website, but I’m sold out on tunes for a couple months
What video of yours do you recommend for injector set up
I thought they included a flash drive with the software??
Can you make a vid for getting the mpvi3 prolink+ to work with your aem 30-0300?
You’ll just use the analog output with the prolink
I am confused on how HP tuners works, do you buy the dongle and then have to pay for credits to HPT to flash your ECM for any changes. I have a H2 and I was gonna get this to hook to a laptop and turn the fans on in the ECM. Not sure if that would be something I could do for free with the tuner dogle?
Correct, you need credits to unlock the tune, once you license an ecm/vin # you can write to it multiple times.
So the mvpi2+ I bought a few months ago was a bad buy.
Soooo have you sussed out an xr6 tune yet
Will my previous credits and vehicles transfer over to the new MVPI3?
If you upgrade yes
Purchased an hpvi2 a while back and purchased a few universal credits but cannot get it tune my 2004 silverado 5.3.... I need to also delete vats out of a 2005 silverado 5.3 ecm for a project but cannot get it to. It reads codes and shows the live data but other than that I can't do anything. Any help would be greatly appreciated
On the 04 pull the radio fuse. If it has an aftermarket radio. For whatever reason they don’t like them.
I want one!!
What do you charge an old disabled man like me to unlock and base tune for a cam, intake, exhaust to get me started? I just refreshed the motor and added those mods. The ecu is from eBay and it’s an 0411 ecu. Thanks!
Got my few days ago 😅
If you buy one of these, can you buy a tune from a third-party
Bud i love your videos and you have helped me tremendously and i appreciate it but did you get paid for ths haha, the 3 loses ford eecv and couple other things, ghe only thing i see is the no laptop logging with accelerometer, its like snap-on update to vehicles that are warranted to lose older stuff you need
I would love to upgrade but until they do an upgrade program like they did with the 2, it's not going to happen. And if they never do that, I guess I'll use my 1 Pro until they don't support it anymore.
Next month they will start doing upgrades
@@GoatRopeGarage awesome! Thanks for the info. Sounds like a job for Santa then.
Sell your one dont upgrade it, id buy it
I juz g0t the 2+ f0r my 2004 supercharged monte carlo
🤘😎✌️🦅
very nice maybe there will be the possibility to use android at some day
How can we get in contact with you?
Check our website www.goatropegarage.com
Brvo~ very amazing ~broth,😈
New software 5.x update removes emission deleting capabilities and ability to turn rear o2 post cat sensors and a few other things. So if your doing LS swaps or such things. Be warned... Lucky I keep all my downloads and could revert back.
haha did you do any research?? take the 10 minutes quiz and you can do everything you want when it comes to ls swaps
I’ll do a video on this soon, but go into tuner tools and you can unlock that stuff. Just have to go to training/courses
So not point to make the update. I will like to know what are the "New models" this can tune and you cant with the rev. 2
Hptuners literally made a video where they tell you why they came out with the mpvi3 haha
I'm actually really annoyed that Pro is included now, I worked hard to be able afford the prolink set for the mpvi2, now it's completely pointless, I could have waited a couple more months and got an mpvi3
Also, does the standalone data logging retain the correct time and date now? It was pretty hard on the 2 to navigate what logs were what, as all the dates were in 1980, and out of order
😂 the mpvi3 don’t work with TDN app in iOS 16.0.2 devices. Confirmed with HPtuner Customer service department.
A blue/gray paperweight in my storage box after they refuse refund because the device work in PC. 😂😂😂😂
id rather have a usb A connection and port. The C's ports go to shit faster
Maybe it is worth to mention that MPVI3 does not supports JTEC or JTEC+ ecu!😢. I will not trade my Mpvi2!
Jtec now working with beta
Oh, No No No, No No. There was never a semiconductor shortage. People are just lazy.
Are you still doing tunes? I emailed you about having a Tune done months ago never heard back?
Yeah, must of missed the email, hit me up again
@@GoatRopeGarage Thank you for the reply, I will email you again tomorrow!
Have you checked out tunertools to see if they have released additional "classes"? I still have only one available to me at this time, which I completed...
hi,bro....im from malaysia...for my local,many stuff of remap hardware or soft...But 1st look,im vry interesting about hp tune,and whan to know more about this think....but how¿🥲😅