trans tech of 45 years. built performance transmissions for racing for about 20 years.have done a lot of tuning in my time. this video vas extremely informative.and helpful thank you so much for taking the time to put this out .
I plan on buying HPtuner next week on my stock 14 5.3 for future mods and this trans tuning guide for annoying clunky shifts and extending trans life is a great starting point. Thanks again.
This video was transformative for me. Ive been struggling with my 6L90 for years, and after using this video as a real-time instuction guide and then doing A/B tests I feel I have a much more solid grasp on the tuning process and the car has never been more fun to drive. I only wish this video had come along years ago! Thank you, sir.
I installed a transmission in my buddies work van and needed to better understand some tuning for this transmission specifically. I am seriously happy you posted this, and I will be watching the rest of your videos now. Subscribed.
Brand new to tuning but your video is so clear and explaining so well im super confident in tuning my 2018 silverado. Thanks for the video man, i cant wait to dive in!
Wow, wow, WOW!!! I recently did a front-end maintenance/replacement, 7.5 suspension lift with Coil-Overs (front/rear), kicker bars, and 35-inch tires. I did the gear/tire converter, but it's been running like straight garbage since. I watched this and its Super informative and goes in depth with explanations. I did the stock settings for 6L80 with Bluecat as explained in this video and the WOT for a stock Gen IV. All I can say is WOW! It is a night and day difference. It drives so much better now! Gained a new subscriber here! Thank you!
Excellent teaching technique explaining what, why, and how. Way better than anything I've seen. I've subscribed and it's not even my platform. Going to check out your channel to see if you have any ZF Dodge stuff.
After taking a data log with the scanner you have to click disconnect from vehicle before you can go back to the editor and write any changes. Do it a million times but still forget occasionally and have to flash back to the scanner to disconnect lol
If anyone does this to their truck with a 6l80 be warned it will make the truck work like its supposed to. What a night and day difference thanks for sharing this matt. So many different things I didnt know that many parameters was changed by the tire size. I cant thank you enough
I’ve been having so many issues with my triple disc from circle d. I’ve taken it to three different tuners and none of them have been able to get it right. I bought hp tuners recently so maybe I can try to fix the issues myself thanks to your videos.
I'm just now getting into some of the HP tuners stuff and this trans video on GM was awesome. going to hunt up a video for my 2012 F150 next. Thanks again.
I used to disable Torque Management in my G8 with 100-200ms shift times. I broke SEVERAL driveshaft to rear diff flange bolts. It would chirp tire all the time BUT every now and then... SNAP... HUGE VIBRATIONS. I learns the hard way. LEAVE TORQUE MANAGEMENT ALONE! You're welcome...
Thank you for the support! Tuning like that honestly follows the guidelines I show in most of my videos. You would just need a wideband and then tune the MAF curve to meet the desired EQ ratio/AFR. You can email me at the email in the description if you need help.
@@Matt_Sanford Understood. Is there any vid in particular you've uploaded that closely resembles bolt-on tuning just off the top of your head? Could be other gens.
i used blue cat for my truck norris cammed 2011 2500HD with a 6L90, drives really good under normal circumstances, 1-2 and 2-3 WOT shits are fine, 3-4 WOT bounces off the rev limit and never shifts. if i let off slightly it will then shift.
Followed this video for mine. Up shifts are perfect. Trans feels great. But I have a wicked hard 5-4 downshift(both under power and on decel) and can’t figure it out. Had it before tuning as well.
Great video! Love you content and ability to dumb something's down and also take it deeper into the psi presets and torque management. No psi adjustments on the shift psi tables? Looking forward to more videos on trans tuning. How about a quick video on scaling a set of say ID1300s or 1050s
I have a 6l90 + HPTuners so this is gonna be a good one for me. Edit: I'm 3 minutes in and boy am I glad I got to this video before I started really figuring stuff out. Edit 2: woohoo I went for my first drive. Got some throttle response stuff to figure out and maybe more tire size adjustments. Good stuff, I'll eventually watch more of the video to see what I might want.
@@MJL1776 I haven't gotten far enough yet. I read my PCM, downloaded the tune, but it didn't show any of the transmission settings you see after like 4 mins in. I'm going to assume that my trans isn't reading, or I'm missing something. So, not far yet.
@@MJL1776 Hey man, just went for my first drive. Yes everything from the video applies to the 6l90 transmission. I have a lot of tweaks to do as my gas pedal was swapped and throttle is weird but I'll tell ya those shifts are solid. A light thunk into gear you can tell the slip is gone. If you're putting a gen4 in your car, you're going to want to ground two yellow wires (yellow and yellow black). One is the starter relay control and the other is the powertrain relay control. If you don't either the engine won't fire or the trans will be in limp mode. Ask me how I know ;) Good luck!
Matt, awesome videos i used this and amazing how much nicer the truck drives. i have a 08 2500hd 6.0 6l90 with a single turbo setup. i was curious what you would change or do for the table in the tow haul mode?
Thanks Matt. I've been dealing with a Gen4/6L90 in a swap for 6 years. Part throttle 2/3 noses over but WOT seems find. Engine and trans are completely stock. I've struggled to figure it out. Watched the video multiple times and am just not sure if it's an oncoming pressure issue or TM. Seems like TM but nothing I do seems to help.
Hey Matt, great video and it's much appreciated for the help, advice. When you reference Gen4/5 tucks, what model years are those. I googled, and its showing compeltly different then what I'm understanding. I have a 2014 silverado, trying to figure out what Gen it is so I can follow along with your recommendations. Also, I put in Transgo SK and TCC kit along with a Circle D Torque converter stock stall. Would this setup still be considered "stock". Stock engine, stock exhaust.
I rebuilt and tuned my 6L80 (by myself). HP Tuners / Bluecat, TrasGo shift kit. I followed this video to a T for the trans tune and everything is working great except for one minor thing. When I go hard on the gas off the line and then decide to abort (say I get to 20-30 mph and quickly let off the accelerator during WOT), it gives me a harsh kick in the pants on the 2-1 downshift. If I ease it down from WOT, it does a nice soft downshift like normal. Is there a place in my tune where I need to look to tell it to go easy on the downshift even for a quick let off of the accelerator during WOT? I am not racing so I don't need it to be so harsh on that downshift... I feel like it is anticipating that the instant removal of pedal command during WOT means that I am about to mash on the gas so it needs to hurry up and get ready for me.
On the tire size dilemma, I just keep a tape measure handy. No tire has been true to size that I've seen yet and doing it this way has been correct every time on speedo.
It isn’t a dilemma. How I said I do it is the way I found to be correct, every single time. I have verified it via GPS on every vehicle that I’ve tuned since I realized it probably 11-12 years ago. So that was more of a tuning tip. You can choose to do it that way or not.
@@Matt_Sanford I was just adding to your tip as the difference in actual size vs advertised sizes differs from brand and size. Some "35s" are 33.5 and some are 34.5 and grabbing a tape takes all guess work and calculators out of the question.
I just had my trans rebuild on a 2013 gmc sierra 1500 5.3 stage 2 cam, Texas long headers. It now slips a little on take off and feels like has no power compared to what it did have. Any suggestions?
Having an issue with the 3200 stall triple disc convertor staying locked up in every gear besides 6th. 5th it’s most noticeable but can see rpm’s move as it locks and unlocks at cruise. Thanks
Excellent content! Question.... What about the purge enable function? Us guys who add to the clutch stack up on the 35r and 456 clutch packs....we get kinda tight on tolerances. Gm hard wired a clutch purge to happen on every new drive cycle just after the 2-3shift to quickly apply the 456 clutches assuming to purge air (?). Well that causes a small "bump" or bindup which totally sucks. So disabling the feature prevents this function. Thoughts on this solution??
I never recommend adding to clutch height but you will find that making oncoming and off going pressure changes as well as adjusting minimum volume can help to resolve your issue.
@@Matt_Sanford I wasn’t sure how else to tag you, so ignore that this is under another comment. The ONLY “complaint” that I have about these videos, is for example at around 32:00, you explain that you don’t typically change it but not exactly what the shift inertia is. Ps this coming from someone with no knowledge, I.E. I’m not sure if it changes how hard it shifts based on speed or throttle position or what. I say ‘how hard it shifts’ because you mentioned it’ll be more ‘rowdy’ with increasing these Other than that specific “complaint”, these are some AWESOME videos and I love that you’re putting them out there
i have a 2014 with the same OS and triple disk but with a tsp stage 2 cam and 33.5" tires and 6" lift. i have better lockup leaving the offset and regulator gain stock. going to 1.5 and 90 in 6th it shudders horrible. allegedly gain and offset is divided which would make stock 70 pounds and the 1.5 and 90 makes 50. ive also heard the apply ramp is actually apply time. maybe i have something misunderstood?
Do you do remote tuning ? Or can I send you my trans file to get retuned. No help here in Canada. H2 Hummer with heads and cam. Installed a 4L80 with PCM wiring adapter.
How do you get the engine to shift at 6800rpm I have a 15 tahoe and can not get my truck to shift past 6000rpm I used the blue cat and it will just hold the gear at 6k rpm and falls on its face?
Matt, anyway you could send me a file for a 2010 Chevy Silverado that I’ve done a vvt and dod delete on, also added a btr truck torque cam and I have access to hp tuner?
Would i have to do anything different if I have dual exhaust with flowmaster super 10 and 3rd cat delete? Also planning on doing CAI and speed engineering longtubes with the 6.2 intake swap.
Thanks for making this video! So when it comes to longevity/drivability of my stock '16 silverado, disabling AFM and setting desired TCC slips to zero seem like a no brainer....?! Or am i missing something?
Hey... Did I talk to you on the phone a few years ago. I bought a wiring harness from a guy and he had me call a guy named Matt in florida and I sent you the computers off of my LS engine. Your voice sound familiar. I still have that engine with very little time on it, I had a joker help me mount it in a W4500 sweeper truck, and the guy made me "custom" motor mounts that broke right away. So its just been sitting. After Covid killed my street sweeping business. Quite sure you are the guy that tuned my ecu and tcu
Have a 2008 Jeep with Gen V 5.3LT/8L90. Do you or are you going to do a video the same for the 8L90? A lot on this video does not apply to the 8L90 direct anyway but it appears some of the features you adjust are there in the T87 ECU but under different headings!!
DOD just blew up on my V6 Silverado...I'm rebuilding it and throwing this tune in. Did you find you had to adjust some of the upshift/downshift points in the table for 5-6?
@ i only went down 5 on the hole table 4-5 5-6. Was a little high for me. And activate the TC lockup after 40 mph on 4th gear and the same for 5th and 6th
So i built a 408 stroker for my 2013 Silverado 4x4. Has stage 2 btr truck cam, ported 823 heads, cai, and long tubes and full exhuast with no cats. Ive got the tune on the motor pretty good but would like to smooth out the shifting. I chose the cam so i could use the stock converter and maintain my lower rpm torque for towing. Aside from zeroing out tcc tables do you think im going to have to use the blue cat software as well or do you think just the first step will help out? Very novice at this tuning stuff so any help is greatly appreciated.
So tuning the slip speed on the torque converter down to a minimum…. Will this fix the The 8 and 10 speed transmission converter shutter? TSB says the fluid exchange fixes it but I’ve seen many that the shutter comes back
I noticed on your first drive the desired slip is showing on the scanner as 4.5 rpm even though you zeroed everything out. Any idea where that desired 4.5 rpm is coming from? I have the same truck in 2017 model and it is showing 4.5 as well after zeroing everything out.
That’s hidden parameters that HPTuners hasn’t defined. I haven’t had it cause any issues though but yes that’s not something we can eliminate at the moment until someone can find it in the binary file and add it to HPTuners or add it into user defined parameters.
So I got around to trying bluecat and when I did the tune the car went straight for 6th gear no matter what I was doing lol. Clearly I messed something up hahaha I had a feeling the numbers I was adding to the table didn't add up but I'll try again later. It's easy to write the old tune anyways.
So, had AFM turned off. My guy also turned lock up off in 1-4 gears. 5th and 6th still have full lockup. Truck still shudders in 5th gear at about 45-55mph. What should I tell him to do next? I also notice very firm downshifts now
In semi trucks, I know actual tire diameter is not the driven tire diameter because of just normal tire flex. I know my actual land speed is different when I'm empty versus fully loaded.
would I lower the oncoming pressures and increase the oncoming volume to stop a shift bind? 2-3 clutches are too tight when rebuilt(guess). I'm getting close by increasing the volume but the reset causes terrible flares until the adaptives start kicking in. About a week or 2 later she starts to shift harder. I never liked that it had to flare until the adaptives took over but what you said at the end made perfect sense about the adaptives telling you "no dummy that doesn't work".
The trick to getting one not to bind is to watch the datalog and determine which part of the shift is causing the bind. If the flare is bad and then it binds after the flare you would increase Oncoming and decrease Offgoing. If it binds then flares, you would decrease Oncoming and increase off going. This is actually the reason why I don’t like clutch height being altered from factory but you should be able to get it dialed 👍
If I set it back to factory settings it doesn't flare that i can tell. The shift is violent and the final shift time is 75 mil sec. I then understood lowering oncoming volume would reduce flare so tried increasing until it started to flare. the adaptives then slowly bring it back to hitting like mike tyson. I tried lowering the oncoming pressure and it seems to help little by little but unsure if I'm doing something terrible to the internals. @@Matt_Sanford
The shop swears up and down they set it to spec but I've exhausted my tolerance and probably going to take it in and make them verify the clearance. the stock tune file binds which 2-3 flares more often than not.@@Matt_Sanford
I honestly doubt I would make that video as you would just tune it like you would be tuning an N/A engine, you would just adjust fuel and timing for the nitrous shot.
Is that half inch of tire diameter only for correct mph? Does that little bit change shift characteristics to the point where you will feel a difference?
I recognize you from Cleets channel, but I'm only here because my 6l90 too a dump and I need to know how to tune for the new one to not trash the converter.
I have a 2018 Silverado, and I just want to take Dod off and tune the 6L80 for longevity. I already installed the surecool thermostat mod. Should I just tell my guy to turn off TC slip in all gears? I do combination in town/ interstate driving. What do you suggest? Just want to get rid of the shudder and make the trans last as long as possible obviously. That’s all
I'm glad cleet plugged your channel Matt I'm very new to tuning and I appreciate the time you take to teach us how to tune
trans tech of 45 years. built performance transmissions for racing for about 20 years.have done a lot of tuning in my time. this video vas extremely informative.and helpful thank you so much for taking the time to put this out .
You are exactly what us tuning/hp tuners newbies need. Thank you, subscribed, and will be watching everything
I plan on buying HPtuner next week on my stock 14 5.3 for future mods and this trans tuning guide for annoying clunky shifts and extending trans life is a great starting point. Thanks again.
I followed all these steps. stock ‘11 Tahoe 6l80. Wow! What a difference. Thanks man!
This video was transformative for me. Ive been struggling with my 6L90 for years, and after using this video as a real-time instuction guide and then doing A/B tests I feel I have a much more solid grasp on the tuning process and the car has never been more fun to drive. I only wish this video had come along years ago! Thank you, sir.
Would love to see an 8l90 video. Awesome stuff man keep it up
I installed a transmission in my buddies work van and needed to better understand some tuning for this transmission specifically. I am seriously happy you posted this, and I will be watching the rest of your videos now. Subscribed.
Oh man does this make a world of difference my truck drives extremely well now thank you for these information videos!!!
Brand new to tuning but your video is so clear and explaining so well im super confident in tuning my 2018 silverado. Thanks for the video man, i cant wait to dive in!
Wow, wow, WOW!!! I recently did a front-end maintenance/replacement, 7.5 suspension lift with Coil-Overs (front/rear), kicker bars, and 35-inch tires. I did the gear/tire converter, but it's been running like straight garbage since. I watched this and its Super informative and goes in depth with explanations. I did the stock settings for 6L80 with Bluecat as explained in this video and the WOT for a stock Gen IV. All I can say is WOW! It is a night and day difference. It drives so much better now! Gained a new subscriber here! Thank you!
Excellent teaching technique explaining what, why, and how. Way better than anything I've seen. I've subscribed and it's not even my platform. Going to check out your channel to see if you have any ZF Dodge stuff.
Glad to see even an expert occasionally forget to disconnect the scanner before flashing 😅 Solid information man thank you for sharing this with us.
When you say disconnect, do you mean physically, or just stopping the scan and disconnecting from the scanner?
Love the video, and don't worry about the length of the video.
After taking a data log with the scanner you have to click disconnect from vehicle before you can go back to the editor and write any changes. Do it a million times but still forget occasionally and have to flash back to the scanner to disconnect lol
@@jtsperformanceautomarine Thanks for this one lol I'll keep that in the back pocket
Dude this is one of the most informative videos I've watched. Liked, saved and subbed.
Glad you've started a RUclips channel. I'm in Murfreesboro and learning how to tune. I hear your name all the time.
Update, thank you for the video! Awesome job on it, truck is fully tuned because of your video! THANK YOU!!!
If anyone does this to their truck with a 6l80 be warned it will make the truck work like its supposed to. What a night and day difference thanks for sharing this matt. So many different things I didnt know that many parameters was changed by the tire size. I cant thank you enough
Let's gooo!!!! Im excited for the high power 6L vid I have a Transbrake 6L truck that I'm trying to shove 28lbs of boost thru!
were still waiting
I’ve been having so many issues with my triple disc from circle d. I’ve taken it to three different tuners and none of them have been able to get it right. I bought hp tuners recently so maybe I can try to fix the issues myself thanks to your videos.
Hey what stall is the circle d converter? Did you ever get it figured out?
I'm just now getting into some of the HP tuners stuff and this trans video on GM was awesome. going to hunt up a video for my 2012 F150 next. Thanks again.
Great video Matt, been using the Bluecat software for years awesome bit of gear 👌.!love the 6L80/90E
What an awesome resource for trans tuning!
Holy crap Matt again major difference when I listened to your “stock” guy claim thanks for helping me feel more comfortable in vcm suite
It seems like this is a no brainer (disable AFM and set desired tcc slips to zero). Have you seen ANY downsides since making those changes?
I used to disable Torque Management in my G8 with 100-200ms shift times. I broke SEVERAL driveshaft to rear diff flange bolts. It would chirp tire all the time BUT every now and then... SNAP... HUGE VIBRATIONS. I learns the hard way. LEAVE TORQUE MANAGEMENT ALONE! You're welcome...
Thanks!
Great video again. I keep coming back to it as my xp grows and I have a more question that is answered by it.
Can you do a CAI and catless full on exhaust tuner vid for the 14-18 L83? That would be great.
Thank you for the support! Tuning like that honestly follows the guidelines I show in most of my videos. You would just need a wideband and then tune the MAF curve to meet the desired EQ ratio/AFR. You can email me at the email in the description if you need help.
@@Matt_Sanford Understood. Is there any vid in particular you've uploaded that closely resembles bolt-on tuning just off the top of your head? Could be other gens.
Awesome! Truck Feels alot better now and now my Speedo is correct 😂.
i used blue cat for my truck norris cammed 2011 2500HD with a 6L90, drives really good under normal circumstances, 1-2 and 2-3 WOT shits are fine, 3-4 WOT bounces off the rev limit and never shifts. if i let off slightly it will then shift.
Very informative video. Please make video about changes to make to stock L83 to run better.
Followed this video for mine. Up shifts are perfect. Trans feels great. But I have a wicked hard 5-4 downshift(both under power and on decel) and can’t figure it out. Had it before tuning as well.
really good video man. a lot of great info
Great video! Love you content and ability to dumb something's down and also take it deeper into the psi presets and torque management. No psi adjustments on the shift psi tables? Looking forward to more videos on trans tuning. How about a quick video on scaling a set of say ID1300s or 1050s
I have a 6l90 + HPTuners so this is gonna be a good one for me.
Edit: I'm 3 minutes in and boy am I glad I got to this video before I started really figuring stuff out.
Edit 2: woohoo I went for my first drive. Got some throttle response stuff to figure out and maybe more tire size adjustments. Good stuff, I'll eventually watch more of the video to see what I might want.
How did the tuning go with the 6l90? I'm thinking of getting this for my truck but video is on 6l80 just curious is everything is the same?
@@MJL1776 I haven't gotten far enough yet. I read my PCM, downloaded the tune, but it didn't show any of the transmission settings you see after like 4 mins in. I'm going to assume that my trans isn't reading, or I'm missing something. So, not far yet.
not that anyone cares but I found the missing 12v wire and my trans read perfectly. it needs power after all.
@@Labergemusic how did it turn out for u? Did everything from 6l80 video basically the same for the 6l90?
@@MJL1776 Hey man, just went for my first drive. Yes everything from the video applies to the 6l90 transmission. I have a lot of tweaks to do as my gas pedal was swapped and throttle is weird but I'll tell ya those shifts are solid. A light thunk into gear you can tell the slip is gone.
If you're putting a gen4 in your car, you're going to want to ground two yellow wires (yellow and yellow black). One is the starter relay control and the other is the powertrain relay control. If you don't either the engine won't fire or the trans will be in limp mode. Ask me how I know ;) Good luck!
Is there a way to stop the transmission from downshifting so early on closed throttle decel?
hey! that's my tuner !!
Great content! This helped me so much. Stoked for the rest of the Gen V stuff
Matt, awesome videos i used this and amazing how much nicer the truck drives. i have a 08 2500hd 6.0 6l90 with a single turbo setup. i was curious what you would change or do for the table in the tow haul mode?
Thanks Matt. I've been dealing with a Gen4/6L90 in a swap for 6 years. Part throttle 2/3 noses over but WOT seems find. Engine and trans are completely stock. I've struggled to figure it out. Watched the video multiple times and am just not sure if it's an oncoming pressure issue or TM. Seems like TM but nothing I do seems to help.
Hey Matt, great video and it's much appreciated for the help, advice. When you reference Gen4/5 tucks, what model years are those. I googled, and its showing compeltly different then what I'm understanding. I have a 2014 silverado, trying to figure out what Gen it is so I can follow along with your recommendations.
Also, I put in Transgo SK and TCC kit along with a Circle D Torque converter stock stall. Would this setup still be considered "stock". Stock engine, stock exhaust.
I rebuilt and tuned my 6L80 (by myself). HP Tuners / Bluecat, TrasGo shift kit. I followed this video to a T for the trans tune and everything is working great except for one minor thing. When I go hard on the gas off the line and then decide to abort (say I get to 20-30 mph and quickly let off the accelerator during WOT), it gives me a harsh kick in the pants on the 2-1 downshift. If I ease it down from WOT, it does a nice soft downshift like normal. Is there a place in my tune where I need to look to tell it to go easy on the downshift even for a quick let off of the accelerator during WOT? I am not racing so I don't need it to be so harsh on that downshift... I feel like it is anticipating that the instant removal of pedal command during WOT means that I am about to mash on the gas so it needs to hurry up and get ready for me.
can you explain more with the gen 4 and gen 5? are we talking about the generation of silverado or the transmission?
If you have the stock tire size, do you still recommend subtracting the .5”?
What stall would you recommend for a 05 5.3 with a truck Norris cam or is the factory one fine? Does it make the trans shift hard?
On the tire size dilemma, I just keep a tape measure handy. No tire has been true to size that I've seen yet and doing it this way has been correct every time on speedo.
It isn’t a dilemma. How I said I do it is the way I found to be correct, every single time. I have verified it via GPS on every vehicle that I’ve tuned since I realized it probably 11-12 years ago. So that was more of a tuning tip. You can choose to do it that way or not.
@@Matt_Sanford I was just adding to your tip as the difference in actual size vs advertised sizes differs from brand and size. Some "35s" are 33.5 and some are 34.5 and grabbing a tape takes all guess work and calculators out of the question.
I just had my trans rebuild on a 2013 gmc sierra 1500 5.3 stage 2 cam, Texas long headers. It now slips a little on take off and feels like has no power compared to what it did have. Any suggestions?
so how does this change vs a 2013 camaro thats stock
Excellent thanks Matt.
Having an issue with the 3200 stall triple disc convertor staying locked up in every gear besides 6th. 5th it’s most noticeable but can see rpm’s move as it locks and unlocks at cruise. Thanks
Excellent content!
Question.... What about the purge enable function? Us guys who add to the clutch stack up on the 35r and 456 clutch packs....we get kinda tight on tolerances. Gm hard wired a clutch purge to happen on every new drive cycle just after the 2-3shift to quickly apply the 456 clutches assuming to purge air (?). Well that causes a small "bump" or bindup which totally sucks. So disabling the feature prevents this function. Thoughts on this solution??
I never recommend adding to clutch height but you will find that making oncoming and off going pressure changes as well as adjusting minimum volume can help to resolve your issue.
@@Matt_Sanford Interesting.... Thanks for the perspective.
@@Matt_Sanford I wasn’t sure how else to tag you, so ignore that this is under another comment.
The ONLY “complaint” that I have about these videos, is for example at around 32:00, you explain that you don’t typically change it but not exactly what the shift inertia is.
Ps this coming from someone with no knowledge,
I.E. I’m not sure if it changes how hard it shifts based on speed or throttle position or what. I say ‘how hard it shifts’ because you mentioned it’ll be more ‘rowdy’ with increasing these
Other than that specific “complaint”, these are some AWESOME videos and I love that you’re putting them out there
i have a 2014 with the same OS and triple disk but with a tsp stage 2 cam and 33.5" tires and 6" lift. i have better lockup leaving the offset and regulator gain stock. going to 1.5 and 90 in 6th it shudders horrible. allegedly gain and offset is divided which would make stock 70 pounds and the 1.5 and 90 makes 50. ive also heard the apply ramp is actually apply time. maybe i have something misunderstood?
Do you do remote tuning ? Or can I send you my trans file to get retuned. No help here in Canada. H2 Hummer with heads and cam. Installed a 4L80 with PCM wiring adapter.
As a fellow h2 owner. Don’t even bother. Your trans is gonna be cooked anyway😂
How do you get the engine to shift at 6800rpm I have a 15 tahoe and can not get my truck to shift past 6000rpm I used the blue cat and it will just hold the gear at 6k rpm and falls on its face?
I did the blue cat tool truck drives alot better! But my wot 1-2 shift feels really slow.slower than the factory shift any tips on what i could ajust
Runs amazing, little quick to downshift but a little adjusting to bluecat and it'll be good.
Might be nice for towing I'll have to see how I like it with the exhaust back on it.
Thanks for this and the Gen V content! Keep it coming. 👌
Matt, anyway you could send me a file for a 2010 Chevy Silverado that I’ve done a vvt and dod delete on, also added a btr truck torque cam and I have access to hp tuner?
Would i have to do anything different if I have dual exhaust with flowmaster super 10 and 3rd cat delete? Also planning on doing CAI and speed engineering longtubes with the 6.2 intake swap.
Thanks for making this video! So when it comes to longevity/drivability of my stock '16 silverado, disabling AFM and setting desired TCC slips to zero seem like a no brainer....?! Or am i missing something?
Any Help on 2018 Nissan Titans?
How close is this for the 8L90? I have a 2015 Escalade with only DoD tuned out.
Hey... Did I talk to you on the phone a few years ago. I bought a wiring harness from a guy and he had me call a guy named Matt in florida and I sent you the computers off of my LS engine. Your voice sound familiar. I still have that engine with very little time on it, I had a joker help me mount it in a W4500 sweeper truck, and the guy made me "custom" motor mounts that broke right away. So its just been sitting. After Covid killed my street sweeping business. Quite sure you are the guy that tuned my ecu and tcu
Not me. I’m from Nashville. I just fly down to Florida when they need me.
You are legendary my friend thank you
Do you have any for Gen 5 exhaust stuff, I have a 2018 sierra with long tube headers and not sure exactly what to tune in order to fix the o2 sensors?
Matt, does this get rid of the “pop” these trucks do when shifting at or near WOT?
Do u tune the 2.8l Duramax to?
Have a 2008 Jeep with Gen V 5.3LT/8L90. Do you or are you going to do a video the same for the 8L90? A lot on this video does not apply to the 8L90 direct anyway but it appears some of the features you adjust are there in the T87 ECU but under different headings!!
Love your in depth videos. Have you tuned a 6L80 with mods? I have the sonnax zip kit, billet pistons, and transgo kit for the pump.
Should you disable tq reduction if your running a single disco converter
I did this tune on my truck, V6 6L80, i just play a little bit with 5-6 shift points, and bro the difference is night day. Thanks for this 🫡🤙🏽
DOD just blew up on my V6 Silverado...I'm rebuilding it and throwing this tune in. Did you find you had to adjust some of the upshift/downshift points in the table for 5-6?
@ i only went down 5 on the hole table 4-5 5-6. Was a little high for me. And activate the TC lockup after 40 mph on 4th gear and the same for 5th and 6th
Have you done any GMC 6.2L 10L90 trans tuning as yet?
So i built a 408 stroker for my 2013 Silverado 4x4. Has stage 2 btr truck cam, ported 823 heads, cai, and long tubes and full exhuast with no cats. Ive got the tune on the motor pretty good but would like to smooth out the shifting. I chose the cam so i could use the stock converter and maintain my lower rpm torque for towing. Aside from zeroing out tcc tables do you think im going to have to use the blue cat software as well or do you think just the first step will help out? Very novice at this tuning stuff so any help is greatly appreciated.
How much do you charge to tune?
When will the video be available for the 6l80 high hp tune ?
Super informative videos! Thanks!
Matt Sanford can you do remote tuning ?
Great video, thanks for sharing! Any reason to keep the TCC unlocked in the WOT tables?
Most of the time, the truck perform better at WOT when unlocked.
Thanks for the video.
Does this work for a 2019 corvette auto?
What happens if you put a stall higher in your trans tune than you actually have in the car?
Would your tcc recommend zeroing apply to a 6L80e in a pontiac g8 gt?.... Please say yes!
😅😅
Do you have any info for the 8 speed transmission gm truck?
So tuning the slip speed on the torque converter down to a minimum…. Will this fix the The 8 and 10 speed transmission converter shutter? TSB says the fluid exchange fixes it but I’ve seen many that the shutter comes back
Yes used it on several 8 sp that where shuddering so bad one flash like a new transmission
I noticed on your first drive the desired slip is showing on the scanner as 4.5 rpm even though you zeroed everything out. Any idea where that desired 4.5 rpm is coming from? I have the same truck in 2017 model and it is showing 4.5 as well after zeroing everything out.
That’s hidden parameters that HPTuners hasn’t defined. I haven’t had it cause any issues though but yes that’s not something we can eliminate at the moment until someone can find it in the binary file and add it to HPTuners or add it into user defined parameters.
Thanks for the explanation.
So I got around to trying bluecat and when I did the tune the car went straight for 6th gear no matter what I was doing lol. Clearly I messed something up hahaha I had a feeling the numbers I was adding to the table didn't add up but I'll try again later. It's easy to write the old tune anyways.
So, had AFM turned off. My guy also turned lock up off in 1-4 gears. 5th and 6th still have full lockup. Truck still shudders in 5th gear at about 45-55mph. What should I tell him to do next? I also notice very firm downshifts now
Pattern should go to special?
How much of this will apply to 8l90 trans tuning?
In semi trucks, I know actual tire diameter is not the driven tire diameter because of just normal tire flex. I know my actual land speed is different when I'm empty versus fully loaded.
Anyone have the link for bluecat software?
would I lower the oncoming pressures and increase the oncoming volume to stop a shift bind? 2-3 clutches are too tight when rebuilt(guess). I'm getting close by increasing the volume but the reset causes terrible flares until the adaptives start kicking in. About a week or 2 later she starts to shift harder. I never liked that it had to flare until the adaptives took over but what you said at the end made perfect sense about the adaptives telling you "no dummy that doesn't work".
The trick to getting one not to bind is to watch the datalog and determine which part of the shift is causing the bind. If the flare is bad and then it binds after the flare you would increase Oncoming and decrease Offgoing. If it binds then flares, you would decrease Oncoming and increase off going. This is actually the reason why I don’t like clutch height being altered from factory but you should be able to get it dialed 👍
If I set it back to factory settings it doesn't flare that i can tell. The shift is violent and the final shift time is 75 mil sec. I then understood lowering oncoming volume would reduce flare so tried increasing until it started to flare. the adaptives then slowly bring it back to hitting like mike tyson. I tried lowering the oncoming pressure and it seems to help little by little but unsure if I'm doing something terrible to the internals. @@Matt_Sanford
The shop swears up and down they set it to spec but I've exhausted my tolerance and probably going to take it in and make them verify the clearance. the stock tune file binds which 2-3 flares more often than not.@@Matt_Sanford
I have 2500hd 2011 Silverado
I would totally would want a tune from your company brother
This is really helpful definitely be using it
Can you do Gen 4 WOT dry nitrous tuning video 🤔
I honestly doubt I would make that video as you would just tune it like you would be tuning an N/A engine, you would just adjust fuel and timing for the nitrous shot.
Where can I get this done in Wisconsin?
Is that half inch of tire diameter only for correct mph? Does that little bit change shift characteristics to the point where you will feel a difference?
Yes it’s to correct mph. No it won’t change shift characteristics whatsoever.
How. Much. Does. It. Cost. To. Tune. Engine. And. Trans. G. 4
Thank you brother
Where are you located? Thanks
I recognize you from Cleets channel, but I'm only here because my 6l90 too a dump and I need to know how to tune for the new one to not trash the converter.
Bluecat 8l90 video??
I have a 2018 Silverado, and I just want to take Dod off and tune the 6L80 for longevity. I already installed the surecool thermostat mod. Should I just tell my guy to turn off TC slip in all gears? I do combination in town/ interstate driving. What do you suggest? Just want to get rid of the shudder and make the trans last as long as possible obviously. That’s all
Absolutely. That always needs to be step #1.