A short question, i want to buy a pole xpert pro to, but nowhere is written how long the apole and the bpole is, so may l ask how long is your apole and bpole, at its shortest? thank you Lea
That sounds odd! Are you sure it spins when you've installed it? That wouldn't make much sense... Unless you're asking about when you are still assembling it, but it's still not installed yet. In that case, it's supposed to spin :)
Hey! Nevermind! Its supposed to wobble my instructor told me lol! Got the pole up though thanks though! THe problem is that its now a combination of sticky and slippery:( I struggle to do half the things that I can easily do at my studio!
I still have trouble getting mine perfectly straight and they've eventually come crashing down mid performance! Does anyone know if there is a device I can use, specifically to keep the pole standing upright, while I twist it into place?
do u have some extencion for it? or is it base kit? how much is tall your ceiling? If i have a 2.75 cm ceiling what misure i have to buy? Thanks a lot.
How long does this take? I don't have much room in my tiny flat, but I think I could manage if I put it up every time I need it and take it down while not in use. Also, is it safe to install on carpeted floors? And how do you know where a joist in the ceiling is? Thank you!
hello, due to limited space I have at home, I may need to assemble and dissemble each time I want to practice. The question is, are there any side effect on the lifespan and 'health' of the pole by doing so, say 3 times a week?
I found it very hard to buy online, they are out of stock because every one is buying them. I found if you buy at a local metal manufacturing company they all make brass poles at a affordable price. Mine cost $300 Cdn :)
Once should always install a pole where a beam is so this way the ceiling will not be affected.
whats the link to buy this pole ? I love it !!!! thanks for the video ;)
How do you take it down
I have this exact pole and am having trouble taking it down. Do you have a tutorial on that??
Caitlin Rose Williams the same 😭😭😭
@@priscalauson8814 I read yesterday someone with the same issue used WD40.
This is a spinning pole right?
I just bought one second hand and my pieces look more like this set up then what is currently on the website
Melissa Piontek it might be an older model. Yes she says this is an xpert pole so it should be a spinning and static pole
Did u manage to take it down? I want to buy one but I'm scared it won't come down
OMG she did not show the most important part using a stud finder!!
Thanks for this video! I need to install mine solo this time!!
This is the 2010-2013 model and I wonder if its still safe to use it in 2024? It pretty old lol ... and I'm about to buy that model to someone
so you do not need to screw it in up?
Nope, no screws needed
I can’t make the x-joint inside my pole de-expand while trying to. It’s stuck and won’t let loose 😧
A short question, i want to buy a pole xpert pro to, but nowhere is written how long the apole and the bpole is, so may l ask how long is your apole and bpole, at its shortest? thank you
Lea
i only have space for one of these on carpet I'm worried it'll slip should i wait till i have tile or wood?
Lacy Anika Hi! If you've seen my newer videos I currently have carpeted floors and it's fine!
Does the X pole spin? And is it safe on tile? I have neither carpet or hardwood..
Kelly McDaniel mine has options for spinning or static. 😊
Kelly McDaniel and yes, tile is fine!
Where to purchase a chrome pole? I'm interested
Mine arrived without the 250mm and 125mm extension pieces. Do you order those separately?
Hey! THe bottom piece when I attach it, it does screw on but the circle base spins; is it safe still? :/
That sounds odd! Are you sure it spins when you've installed it? That wouldn't make much sense...
Unless you're asking about when you are still assembling it, but it's still not installed yet. In that case, it's supposed to spin :)
Hey! Nevermind! Its supposed to wobble my instructor told me lol! Got the pole up though thanks though! THe problem is that its now a combination of sticky and slippery:( I struggle to do half the things that I can easily do at my studio!
I cannot remove it. Have it for 3 years and it's stuck 😢
I still have trouble getting mine perfectly straight and they've eventually come crashing down mid performance! Does anyone know if there is a device I can use, specifically to keep the pole standing upright, while I twist it into place?
use a spirit metre to measure it's angle when setting up
tie a string from the ceiling or put a leveler up against it and level it
do u have some extencion for it? or is it base kit? how much is tall your ceiling? If i have a 2.75 cm ceiling what misure i have to buy? Thanks a lot.
Do you have to screw this into your ceiling ?
I live in an apartment and I’m not trying to put holes in my ceiling lol
You totalle help me to install mine. Thank you!!!!
How does this pole spin?
my 3 screws at the bottom don't go all the way in, are they meant too?
How long does this take? I don't have much room in my tiny flat, but I think I could manage if I put it up every time I need it and take it down while not in use. Also, is it safe to install on carpeted floors? And how do you know where a joist in the ceiling is? Thank you!
I estimate 10 minutes at the beginning at most, but it will be faster if you are practiced.
You can find a joist by knocking o the ceiling.
hello, due to limited space I have at home, I may need to assemble and dissemble each time I want to practice. The question is, are there any side effect on the lifespan and 'health' of the pole by doing so, say 3 times a week?
how high are your ceilings?
Adjuster cover?
+Kaybett where you buy pole dance spining thanks
Can it spin
yes, if you buy the one that is static and spin :)
Hey. Thanks for the video! Is it true that the pole is not damaging the wall and the floor? Greetings from Austria :)
That sounds wonderful :) Thank you!
xpoles dont damage your floor or ceiling.
Necesito saber cómo se desinfla, no hay ningún video que enseñe
How can I figure out the mm size, like you said yours was 45mm
Most poles are 45mm as this is standard comp size, but XPole list the sizes when you buy them on their website
Ñ
If I wanted something like this but horizontal for a pull up bar and to have suspension cables on how would I do it ?
I found it very hard to buy online, they are out of stock because every one is buying them. I found if you buy at a local metal manufacturing company they all make brass poles at a affordable price. Mine cost $300 Cdn :)
Where did you get this $300 CDN pole?
How to take it down ????😢😢
This won't work on carpet or concrete will it I need something with will work or carpet or concrete
Yes x poles works on carpet x
I don’t kno why I still don’t trust this
Most simplest way
+Kaybett thank YOU