How To Clean (MAF) Mass Air Flow sensor 2006-2017 Toyota Yaris
HTML-код
- Опубликовано: 1 янв 2017
- If your car has rough idle or excessive vibration then this video is for you. Do this first and then watch my other video "how to replace a pcv valve". You can use the same spray to give your pcv valve a good clean or replace it if you want. If you clean the mass air flow MAF sensor and the lcv valve, I guarantee your car will idle and run so much smoother and you will increase your MPG too.
MAF sensor cleaner amzn.to/2ruWV1D
The tools I used in this video are
Small phillips head screwdriver
Flat head screwdriver
CRC mass air flow sensor cleaner
How to clean a MAF sensor 2006 Toyota Yaris
How to clean a MAF sensor 2007 Toyota Yaris
How to clean a MAF sensor 2008 Toyota Yaris
How to clean a MAF sensor 2009 Toyota Yaris
How to clean a MAF sensor 2010 Toyota Yaris
How to clean a MAF sensor 20011 Toyota Yaris
How to clean a MAF sensor 20012 Toyota Yaris
How to clean a MAF sensor 20013 Toyota Yaris
How to clean a MAF sensor 2014 Toyota Yaris
How to clean a MAF sensor 2015 Toyota Yaris
How to clean a MAF sensor 2016 Toyota Yaris
How to clean a MAF sensor • How To Clean (MAF) Mas...
How to replace a PCV valve • How To Replace a PCV V...
Inflate and check tire pressure • Inflate and check Tire...
কিভাবে ভর বায়ু প্রবাহ সেন্সর পরিষ্কার করতে. টয়োটা Yaris
Kibhābē bhara bāẏu prabāha sēnsara pariṣkāra karatē. Ṭaẏōṭā Yaris
Kako čistiti senzor masenog protoka zraka. Toyota Yaris
ဘယ်လို Mass Air လေကြောင်းလိုင်း Flow အာရုံခံကိရိယာကိုရှင်းလင်းစေရန်။ တိုယိုတာ Yaris
bhaallo Mass Air laykyaunggline Flow aarronehkan kiriyar ko shinnlainn hcayraan . toyotar Yaris
Com netejar el sensor de flux d'aire. Toyota Yaris
如何清洁空气质量流量传感器。丰田亚里斯
Rúhé qīngjié kōngqì zhí liàng liúliàng chuángǎnqì. Fēngtián yà lǐsī
Kako To Čist senzor Mass Air Flow. Toyota Yaris
Paano Upang Clean Mass Air Flow sensor. Toyota Yaris
Comment nettoyer le capteur de débit d'air de masse. Toyota Yaris
So reinigen Sie den Mass Air Flow Sensor. Toyota Yaris zu verkaufen
कैसे मास एयर फ्लो सेंसर साफ। टोयोटा Yaris
kaise maas eyar phlo sensar saaph. toyota yaris
Come pulire il sensore di massa del flusso d'aria. Toyota Yaris
Cara Bersihkan sensor Mass Air Flow. Toyota Yaris
マスフローセンサーを清掃する方法。トヨタヤリス
Masufurōsensā o seisō suru hōhō. Toyotayarisu
Conas a Glan Aifreann Shreabhadh Aeir braiteoir. Toyota Yaris
Làm thế nào để sạch cảm biến Lễ Air Flow. Toyota Yaris
วิธีการทำความสะอาดเซ็นเซอร์มวลอากาศไหล โตโยต้ายาริส
Wiṭhī kār thảkhwām s̄axād sĕnsexr̒ mwlxākāṣ̄ h̄ịl to yo t̂āy ā ris̄
Cómo limpiar el sensor de flujo de aire masivo. Toyota Yaris
How To Clean Mass Air Flow sensor MAF Toyota vitz
How To Clean Mass Air Flow sensor MAF Toyota Belta
How To Clean Mass Air Flow sensor MAF Toyota Echo
How To Clean Mass Air Flow sensor MAF Toyota Platz
How To Clean Mass Air Flow sensor MAF Toyota Vios
How To Clean Mass Air Flow sensor MAF Toyota YARIS
How To Clean Mass Air Flow sensor MAF Toyota YARIS
How To Clean Mass Air Flow sensor MAF Toyota YARIS
How To Clean Mass Air Flow sensor MAF Toyota VVT-i Engine 
Хобби
![Young Nudy - John Wayne (feat. Metro Boomin) [Official Video]](http://i.ytimg.com/vi/NY8HnYYo2fo/mqdefault.jpg)
Came here to find out where the MAF was located and how to remove it so that I may install a new one. Thanks for the helpful video.
Thanks mate
I struggled many days and paid very high amount to know that faults
After some research, I understand this is one of a few crucial
Wow , that worked good . Better idle and better take off and shifting , thank you .
Thanks mate! Great video
Thanks for the video, I've just done this on my 2006 yaris. Got a check engine light at first when I put everything back but after a few moments the check engine light went off
It’s amazing,that works
Thanks so much Bro
My car it’s a beast now
💪🏻
Thanks for your help on this
Thanks a bunch. Handy little project
It is a good idea to also clean the electrical contacts using an electronic contact cleaner.
1:04 That's absolutely ridiculous! Covering the electrical contacts when you're using, precisely, an electronics/contact cleaning spray... I'll leave some space for introspection. LOL 😂
Exactly what I also said.There is NO need to cover anything with duct tape whatsoever.
Thanks dude
Thanks for sharing. I really like your videos!
wow. thanks
Amazing videos, no bullshit, straight to the point. Keep up the good work bro 👌🏼 and thanks for the help 👍🏼!
Did you have video for EGR cleaning?
Hey some of the toyota guys have you some Review to a china copy maf sensor from ebay ?
How do you clean the IAC valve?
any videos how to change motor mounts yaris 2010
do you have the link to clean your pcv valve?
Any benifeits to cleaning this sensor?
Which engine were you doing this on? I ask because the 1.0 litre 3 cyl 1KR engine DOES NOT HAVE a mass air flow sensor.
Hmm, thicker wire closer to sensor is grey and clean. Mine looks corrodes brown. New MAF sensor it is then!
Which body kit u r using ? Like front bumper etc! Looks goood !
It's a factory kit. The YRX model came fitted with them when it was new.
After cleaning the maf will it cause rpm issues or wild rpm? Thanks
If it was really dirty before it was cleaned then you might have to do a relearn procedure- basically restart the engine a few times until the revs go back to normal.
i have a 2008 yaris sedan, the idle became unstable when the engine is at work temperature, i already cleaned the throttle body, it was really dirty, the problem solved like for 3 weeks, but again the iddle is unstable and it has some lag in the throttle. if i do the maf sensor cleaning and change my pcv valve, this should be solved? what other thing could be? i appreciate the help and videos. thanks
A few people have asked me this question and i always recommend changing the spark plugs. I made this video for you guys. check it out
ruclips.net/video/PcAU2PsLMVI/видео.html
I update you with my case, both of the o2 sensor were having troubles keeping the amp when they heated. i replaced both and the problem solved. i think it was the last thing you should check and the least probable error. but the principal thing for having this diagnose is the fuel consumption going down. thanks for the videos mate
@@20JoaakoHi, if the idle is not stable while driving after 2 weeks should I change the oxygen sensor and spark plug?
MDD DD my friend, if you can check the resistance of the sensors first before change it because is really expensive. here i left you the manual of the process of inspection cardiagn.com/1nz-fe-engine-emission-control-2007-yaris/
How do I know I have to change for a new one.?
Check the error codes using an OBD2 scanner tool. The MAF sensor error code is P0101. Clean it first then clear the code. If the error code comes back you probably need to replace it. Codes P0110 P0100 can also relate to the MAF sensor. I used about half a can of MAF sensor cleaner, really give the wires a good spray.
Sir is that the only part I need to clean for Toyota Yaris 2012? I mean Mass Air Flow Sensor Fluid Meter? Or NCP93 Toyota Yaris 2012 doesn't have any Mass Air Flow Sensor Fuild Meter?
Hi, Can I use 70% Iso propyle Alcohol to clean ?
That would be better than brake cleaner but maf sensor cleaner would still be best
Can it be cleaned without removing it ? On Yaris I changed air filter today - can see MAF in Air intake tube - can see hot wire sensor
the visible wire is the iat (inlet air temperature) sensor
For goodness sake! How lazy can someone be! 2 screws, I repeat, two screws... Geez!
@@crpth1 😂😂😂
And dude you're helpful here in comments thanks
Could u plz tell me. While i switch on tha AC durring slow speed my car engine vibrates for a second than again normal. Toyota yaris 2008. What could be the reason ?
This is normal Jawed don't worry.
Your asking your car to do something that requires a bit of power. When you switch the AC on the alternator needs to adjust. That's all that 1 second vibration is.
Check your engine mounts its possible they could be going out
What kind of wheels is that in the thumbnail, Corolla XRS wheels?
Stock Yaris YRX wheels
Should I disconnect my battery
Hi,today only I watched your video.My Toyota yaris 2011 model Hatchback have problem with MAF.The Mechanic said to replace,costs NZ$450.!!!!Still car running without troubles with the old sensor.But some times waiting at signals the car making some vibrations and struggle to move as usual speed from the signal.If I give maximum axilaration on pedal, within 5 seconds the speed chane to the best speed.I have a question.If I do like your video,is the MAF's problem can solve? Because the Mechanic told,the sensor not sensing the air flow properly. Is this will help me to solve the issue?Please help.Thanks alot.
The part only costs $150 US so around $240 NZ . I am not sure how easy or hard it is to get the part in NZ. I would say if you can order the OEM MAF sensor for cheaper than what you were quoted, just order it and install it. It is much cheaper and not a hard install by any stretch. However, do be careful unplugging it. Honestly, if your mechanic said it was the sensor and you plan on getting it replaced, there is no harm in pulling it out and using the MAF sensor cleaner before going through with replacing it. If it fixes the issue, you will save a lot of money. Make sure you only use MAF sensor cleaner, do not use anything else because it can leave residue and it is a very fragile sensor.
have yaris idle sensor?
The IAC sensor is different to the MAF sensor if that is what you are asking. I will try to do a video how to clean/replace an IAC sensor when I have time.
Hey how are you?
So I've had another problem with my vitz.. when it idles.. I can hear a chain noise in the motor.. many repair shops say that its the timing kit and they say I need to change motor oil. I'm using 10w 40 right now and they say I need to use 20w 50 and some say I need to use 10w 30.. I live in a tropical country, does it has something to do with the temperature? The same problem causes my car to struggle to start in the morning. With one swing tho .. he makes like an old car trying to start before he idles... and then the chain noise.
When driving and giving gas it makes a rough sound.. what do u think?
I think you should change your starter the flyweel must be wearing down? If this only happens when your car is COLD. Also if it was the Timing Chain, the performance will be dying eventually snapping the whole engine apart. Before you get stuck on the Road, try to go get your starter tested? Its free in Auto zone? But if you hear like a lound grind, it is definitely the starter
Hi, where can I find the MAF for a Toyota Run X?
It’s next to the airbox where the air intake pipe connects.
@@michael77x My run x loses power whenever I accelerate it to 3000r/pm... It just wouldn't go beyond 3000r/pm
@@giftthabethe7129 Clean the throttle body (inside) but do not remove it.Leave for 10 mins to dry.No need to remove battery terminal.Whenever i clean the throttle body i also clean the MAF sensor and PCV all in one go whilst i'm under the bonnet/hood so all 3 the done and i don't have to worry about them for another 40.000/50.000 miles.
To REPLACE the air flow sensor do u just buy the part from a auto store and plug the new one in instead of the old one
Yes that's exactly what you do 👍
No. Disconnect the battery before installing. Also clean the air filter
@@jasonlewis460 , no need to remove battery, the connector is push & pull! I've done so many times of removing the MAF sensor and cleaning It doesn't require technicalities to do it!.
@@paididoy it's best if you disconnect. The computer needs to reset. Especially these models.
@@jasonlewis460 dis connect the negative plug only?
Здравствуйте, трясётся двигатель на D передаче.
Amazing that lil piece causes to engine problems 😅
Hi,
Is that sensor the reason why my car is not running stable after a battery drain?
It sounds like you need to reset the ECU
Channel 1
So how do I do that? I saw someone resetting it by just pulling the fuse.. is that it?
And even the A/C doesn't work, the fan won't turn on under the hood like it used to. I bought a new battery, but still the same
To reset the ECU disconnect the negative battery terminal for at least 15 minutes. Reconnect the negative battery terminal. The car will need about 2 days to relearn all the functions so it will run a bit rough for a while. Also you need to check every single fuse.
Channel 1
I hope this solves the problem.. thank you so much for the info
I'll give you a reply after I've done everything 👍👍👍love up!
Channel 1
Hi, just wanna tell you that my car is fixed.. car runs normal again.. A/C works fine.
Thank you soo much for your help👍👍.. I really want to thank you more but dunno how 🙈
Do I disconnect the negative battery plug
I use a WD40 and still working good 👍
You are only supposed to use MAF cleaner because anything else will leave residue. Not to mention it is only $10 a can.....
@@jennykelly4111 hi mate 👋 you think the WD40 it not good for cleaning the MAP sensor?? 🤔 not any fail code at the moment 🤪
@@jorgefonseca9225 best of luck bud
It is good to use break cleaner