Was away for few months, my 2 boys damaged the disc tray of our xbox 360 console as the tray was not moving. I simply used this video to strip the machine and then adjusted the disc tray. Everything now works perfectly. The boys were so happy and I felt like a super hero. Thanks a million for putting up this video.👍
Thanks for this tutorial, I did it step by step , pausing the video between section, I actually fixed the power issue from another tutorial. Thanks again.
Sure thing, here is the link : ruclips.net/video/GSDQhHk4C4U/видео.html I am also going to reply without the link so this will be in your spam box ok. let me know if you get the link
I really want to thank this dude,you just saved me over two hundred dollars,it took me all afternoon but thanks to your guidance,I was able to take apart and resemble my console after retrieving the cd that was stuck inside,God bless you man.
2024, February. I finally got the guts to take apart the old xbox after 14 years of use and being passed from stepfather to child, then to step child after years of being forgotten. It even sat in a closet after the red ring of death reared its ugly head. I got it working, barely. She struggled. But after buying tools and having too much free time, I decided to take it apart, and this video was my savior. Thank you so much for making this. You gave me back my childhood❤ Edit: Just wanna add it feels SO WEIRD seeing it open like this
This tutorial is by far the best one I have seen so far because ..... - View is clear. - Camera focus is right where it needs to be. - Simple and easy to follow instructions. Thank you :)
when ur trying to do this at 2 in the morning and ur parents are in the room next to you sleeping and ur trying to snap the welded plastic and its super fucking loud
My Xbox needed a clean, the fans were really dusty, and it hasn’t been cleaned in around 5 years. Thanks man, this made my Xbox a little less like a jet engine.
I've ripped part of my thumb nail off doing this, I don't have the correct tools and I have to be aggressive and just pull the plastic off. The result is injury.
Had to deep clean my Xbox (it's been ok the shelf for almost four years without being cleaned) so this really helped me get inside it to remove all the dust and gross that had started collecting. I actually managed to cheat and not remove those special screws and didn't use any tools besides a butter knife and a can of pressurized air. Anyways, this works fabulously and I was really able to understand what was going on (videos are WAY better than written instructions lol) Thanks for the help dude :D
Thank you!!! You're the only person who actually says/tells/shows that there is a hidden clip for the top shell on the back behind the Xbox360 sticker, as well as how tf to get it to pop open.
Thanks. You helped me get much closer to opening my disc tray box. Tore apart the xbox, unscrewed the disc box completely, found the yellow circled hole to poke a paper clip into and to my surprise there actually was a game left in it. Splinter Cell double agent. I'm gonna be so glad to play this again. Worth the hour of work.
He screws up and tells you to "break the plastic". You dont break any plastic. The side trim and the the flat plastic sheets on the side come off as ONE piece and there are giant plastic clips holding it all on.
I work on electronics for a living, and you will occasionally break plastic when your not supposed. But yes.. Telling people to break anything is bad for business for sure.
7:08 - Hint - If you dont have a security bit, use a tiny screw driver and put a paper towel (i folded it to make it a little thicker) on top of the screw. Then put the screw driver in and the paper towel will help it "grip" the top of the screw.
You have a step backwards. You don't have to break the plastic removing the side. Pull upward on the inner plastic near where the second smaller hole is. As you rock it and apply pressure from closer to the center and not the sides, the clips will buckle. That curvature is enough to ride over the clips and the side bezel and matte inlay come together out as one piece. Other than that, thanks
@@danmac0 you're talking about when you take it apart on the sides he's talking about the top and bottom one thing where the hard drive is and the other being the other side opposite of the hard drive location
took my 2nd hand xbox apart using your video to clean the fan and everything worked after putting it back together. thanks, clear and easy instructions
To save ur Warrenty its simple just use a hair dryer to heat it up till your sticker is soft/sticky on the bottom then peel it off slowly then once your done place it back and it looks as if it was never even touched. Just make sure not to over do it.
8:51 , i would like to point out that there is a hidden pin under the sticker that releases the bottom one, it is much easier requireing no physical effort
OMG.. thank you so much for this very informative and detailed video. Apparently, at a family party, my mother spilled wine on the top of my xbox. Nothing appeared wrong at first, but over time it appears (now) that the DVD drive had become 'sealed' by rotting/drying residue wine. Other videos talked about the regular 360 and your video shows the slim model (I have the Halo Reach edition). Long story short, I fixed mine.. thanks to this video!!!
I found this VERY useful and used it as a walk-along guide as I tore mine down. I really just wanted to drill wall mount holes into the backside to mount it vertically against my wall, but wasn't looking forward to take it apart on my own. This made it easy and was well worth the time, THANK YOU!!!
Why do these videos tell people to break the plates loose? thats what the holes in the plates are for to stick a dental pick or small screw driver into release the snaps. The holes are right over the snaps just pop them and release the whole plate no need to break anything off.
thanks for making this video, my cat thought it would be fun to play with my disk tray when it was open and messed it up. so I looked up "how to take apart an xbox 360 slim" then your video came up. was honestly very helpful so thank you again
"But you're actually breaking a bit of plastic"... Why do you think the little apertures line up exactly over the tabs you need to pull aside? The holes are there for one and one reason only: to give you access to those tabs. And yet, you remove the entire plate instead of just sticking your screwdriver through the holes and pull aside the tabs? If plastic is welded shut on a device that the manufacturer needs to be able to open up for repairs, it's a pretty good sign that breaking the welds is not necessary to access the inside. If that's the way you do it, fine, it's your xbox. But don't go on RUclips advising others to break their consoles too when it's completely unnecessary.
Yeah, I was confused as to why he was doing it like that on video when I was able to do it without breaking the parts. Unfortunately it seems this is also in the guide ifixit posted on their website.
Yeah like they welded the plastic after putting box together. 😂😂😂😂 If you would use your brain you would realize that those plates are part of the side rims and as you pull the rim off it comes of with it 😂
Nice Video, helped me too. One thing I noticed, the flat head holes that are part of the inner plastic piece that is plastic riveted to the outer shell, if you put a small flat head down into those holes, you can release the clips that hold the inner and outer shell out at once. This way I didn't have to break any plastic rivets.
This was very helpful in getting inside our child's Xbox 360 to fix a small piece that had broken to hold the switch for opening and shutting the disc drawer. Thank you. I could not have fixed it without this video.
THANK YOU SO MUCH this video has been really helpful. My xbox 360 slim recently got the red ring of death a year ago and I've been meaning to take out the dvd rom drive to swap it out with the broken dvd drive one in my fat xbox 360. Your video helped me a LOT with the disassembly. thank you once again, warm regards from Jakarta, June 01, 2024.
thank you for the video! This method worked out well! Whoever can not figure this out either went to fast, or was not gentle enough. Yeah you have to improvise a bit, I used the same screw driver to take the whole thing apart. I didnt break anything! Usefull video, just go slow
this is the first time an instruction video made accurate predictions, yes, my console is suffering from the red dot of death, yes, like the male technophile I am, I tried to rush in blind and backwards, after taking a few plastic chunks out of the cover, I swallowed my pride and looked for an instruction video, you deserve my like
Thank you to this video. No one wanted to fix my daughter's XBox Disc drive door. This video taught me how to take apart the unit to get at the drive. Now my daughters XBox is alive and kicking, and no spare parts. LOL
this was very helpful for my family and I. Needed to fix the drive, your video saved time, money, and a trip to repair shop. Thanks...The Buford Family
Just came across this video and wanted to point out that you don't break those side frame clips that are 'melted' together, you just need a long skinny flathead screwdriver to release the six tabs.
thank you for this simple and easy tutorial to follow through , I watched it while I was disassembling my own Xbox , and I gotta admit those melted things was a bit of annoying I gotta say too and now it's reassembled and good to go , I just wanted to clean it inside
Omg man your a life saver it won't take the games it keeps saying open tray and I didn't know how to take off the cover thank you man now it's time to try and fix it
Great tutorial. By the way, it's called a Torx screw. T-10 = Torx bit. And the little sticker on the back side is not the security sticker - breaking the warranty. It's the round sticker on the inside covering one of the long Torx screws - unsecuring the metal box from the bottom plastic frame. Thanks for the help!
I cut myself on the back of my index finger when taking off the melted plastic part. I just got out of the shower, sitting in my LEATHER office chair at the desk doing this in nothing but my undies and Spotify's shuffle function made my metal go to some sad fucking song I had saved in my favorites to use in a video. Opening up your xbox to clear it from dust like me? Expect blood, sweat and tears before you even have it opened.
My brother got grounded about 3 years ago and was on the Xbox illegally. He happened to be either putting in or taking out a disc and long story short he jammed the disc tray. Thank you so much.
***** xbox gets taken down by lizards just as often as sony. These bastards think they are clever with their ddos "attacks". I use both consoles. They both have their strengths and weaknesses but I'm a gamer. I don't care very much about what system or company makes the hardware and how much megadrives and floppy ram they have. I just care about whether or not my games are fun at the end of the day.
I just found my brother old Xbox 360 like the one on the video and when I connect to the power the power brick have no light on it it won't start up do I need to buy new one or I can fix it I just want to play old games like Halo
sigh 2020 and im afraid i have a bunch of crap in mine...power isuues i think...wish me luck...or its 100 bucks on a second hand with a bunch of games i probably already have lol
Your a legend! I had 2 xbox 360's but 1 was broken and the other worked but had snapped plastic on the fan grill outlet so watching your video I now have 1 that works and also looks great. Thank you, I have liked and subscribed.
My 3 year old shoved a pen into the fan, if it wasn't for this video I would've probably trashed the machine. Thank you for this, you've saved my xbox and sons life 😁
Yep this is why if you are sure you can do it do it but if you don't have a clue of the outcome then why do you do it also I have the red ring of death wish me luck to fix it
Time to finally clean it out after 11 years, it survived countless spills, drops, the three red lights of doom. Wouldn’t be doing it any respect if I didn’t give it a little service
Dude you’re a lifesaver I would have eventually found out but you save me a lot of time I had an Xbox collecting dust for a couple years and don’t have the money to get a new system so this will help out a lot thanks I subscribed liked and hit the notification bell
I know the xbox elite was easy as fuck to open. I put the ghost case on it with blue LEDs and a wisperer fan with blue LEDs, IT WAS FUCKING AWESOME!!! they have it for slim but not worth it in my opinion. microsft should have just made as easy to open as the elite. and with slim being hard to open, I don't want to talk about opening an xbox one 0-o
This video is still saving people's lives, nearly a decade later.
Thanks for the help!
Yah bro i just took out my Xbox to have a fell for the old days and play Forza and it's Dusty as heck
It indeed does.
2022 and it's still a champion.
Thank you bro for saving thousands of lost souls ;)
Nice name
@@itz-electro same to you lol
If it wouldn't break the tabs though. Really annoying that it is still believed to be the right way to disassemble this
Was away for few months, my 2 boys damaged the disc tray of our xbox 360 console as the tray was not moving. I simply used this video to strip the machine and then adjusted the disc tray. Everything now works perfectly. The boys were so happy and I felt like a super hero. Thanks a million for putting up this video.👍
Thanks for this tutorial, I did it step by step , pausing the video between section, I actually fixed the power issue from another tutorial. Thanks again.
can you link that power issue tutorial?
Sure thing, here is the link : ruclips.net/video/GSDQhHk4C4U/видео.html
I am also going to reply without the link so this will be in your spam box ok. let me know if you get the link
I just sent the link in a reply, if you don't have it, check your spam folder, I sent it there ok, let me know if you got it ok
okay thanks!
@@BENZ007
Zz
Thank you. Came back to this video 9 years later, still as perfect as ever.
I just threw at out the window and it opened in 3 seconds
Thank Yoooou! ❤️❤️ It fucking worked!!
I did not waste 11 minutes on a shitty video 🔥🔥❤️
Boss way to open a damm Xbox
😂
😂😂
Seems legit
I really want to thank this dude,you just saved me over two hundred dollars,it took me all afternoon but thanks to your guidance,I was able to take apart and resemble my console after retrieving the cd that was stuck inside,God bless you man.
I just hope you didnt take off that welded black plastic off.And destroyed fabric plastic welds.
2024, February. I finally got the guts to take apart the old xbox after 14 years of use and being passed from stepfather to child, then to step child after years of being forgotten. It even sat in a closet after the red ring of death reared its ugly head.
I got it working, barely. She struggled. But after buying tools and having too much free time, I decided to take it apart, and this video was my savior.
Thank you so much for making this. You gave me back my childhood❤
Edit: Just wanna add it feels SO WEIRD seeing it open like this
That's quite a history for you and the Xbox! I'm glad you got it up and running, have fun and enjoy the nostalgia!
April 2024. Mine just really dusty an has cat hair in it
June 3rd I can't get the last clip to budge on the case
This tutorial is by far the best one I have seen so far because .....
- View is clear.
- Camera focus is right where it needs to be.
- Simple and easy to follow instructions.
Thank you :)
Don't break the tabs. There is a way to open them.
@@a_beebleI would love to know how not to break the tabs. Do you have a link for me to resort to ? I’d gladly appreciate it!
when ur trying to do this at 2 in the morning and ur parents are in the room next to you sleeping and ur trying to snap the welded plastic and its super fucking loud
It is completely unnecessary to break the black plastic plates out of the chrome end caps. Just use a small flat head screwdriver in the slots.
+snutrekker thank you, I didn't know that lol
@@snutrekkercouldn't have said it better.
Finally, I just needed to give it a good clean after 6 years. Mine has no problems, just dusty.
You're not wrong bud, dust buildup in an xbox isn't a mythe after all.
DrowsyEel Same. I'm a guy but my aunties channel lol bit I don't wanna risk taking it apart, it looks like a pain and to put back together
But*
Diane Thompson Its a pain to take it apart. Its easy to put it back together though.
SunBro's \[T]/ just use a vacuume so it can suck up the dust
My Xbox needed a clean, the fans were really dusty, and it hasn’t been cleaned in around 5 years. Thanks man, this made my Xbox a little less like a jet engine.
Thanks RUclips for recommending this, for those of us still living in 2005
yes me
Same. My xbox won't read my discs so yea gotta see what's wrong there
Yeah sadly for me 😕
Or the MLGS yea I still play COD MW 3
The Slim came out in 2010 tho
I opened this with a knife because it’s three in the morning and I can’t go get tools. I cut myself. Not with the knife. But with the Xbox.
I used tools but cut myself from the xbox aswell
But how did you cut yourself with a Xbox 360 what the heck
John roy Asdolo it’s called being stupid. I’m a pro.
I've ripped part of my thumb nail off doing this, I don't have the correct tools and I have to be aggressive and just pull the plastic off. The result is injury.
Ethan Wells it’s about 12 o’clock for me and I did the same thing but instead I’m using a coat hanger
Had to deep clean my Xbox (it's been ok the shelf for almost four years without being cleaned) so this really helped me get inside it to remove all the dust and gross that had started collecting. I actually managed to cheat and not remove those special screws and didn't use any tools besides a butter knife and a can of pressurized air. Anyways, this works fabulously and I was really able to understand what was going on (videos are WAY better than written instructions lol) Thanks for the help dude :D
Thank you!!! You're the only person who actually says/tells/shows that there is a hidden clip for the top shell on the back behind the Xbox360 sticker, as well as how tf to get it to pop open.
How do we do it, I can't do it like he did
Thanks. You helped me get much closer to opening my disc tray box. Tore apart the xbox, unscrewed the disc box completely, found the yellow circled hole to poke a paper clip into and to my surprise there actually was a game left in it. Splinter Cell double agent. I'm gonna be so glad to play this again. Worth the hour of work.
THANK YOU!
My cat used the ejected dvd tray as a step. Without this video I wouldn't have gotten it open safely to re-seat the dvd tray!
He screws up and tells you to "break the plastic". You dont break any plastic. The side trim and the the flat plastic sheets on the side come off as ONE piece and there are giant plastic clips holding it all on.
Must have no common sence
Dang it, I just broke it.
I came here to say this. You beat me to it.
Yeah, just grab a flathead screwdriver to easily pop them off
I work on electronics for a living, and you will occasionally break plastic when your not supposed. But yes.. Telling people to break anything is bad for business for sure.
still incredibly useful years later, thank you!
I know it’s been 11 years but thank you for this video. I fixed my fan in my Xbox 360 thanks to you.
Thank you so much for your very helpful video. Now when my son breaks his slim I know how to open it up. Keep up the great work.
7:08 - Hint - If you dont have a security bit, use a tiny screw driver and put a paper towel (i folded it to make it a little thicker) on top of the screw. Then put the screw driver in and the paper towel will help it "grip" the top of the screw.
Thank you this sounds much smarter than melting a pen into the Xbox
You have a step backwards. You don't have to break the plastic removing the side. Pull upward on the inner plastic near where the second smaller hole is. As you rock it and apply pressure from closer to the center and not the sides, the clips will buckle. That curvature is enough to ride over the clips and the side bezel and matte inlay come together out as one piece.
Other than that, thanks
No, there is actually a hole behind the sticker. You just need to put a needle in the hole to open
@@danmac0 no he is correct. That's how it's done without breaking anything. Just requires some patience, and a soft touch.
So pull where the smaller whole is?
@@danmac0 you're talking about when you take it apart on the sides he's talking about the top and bottom one thing where the hard drive is and the other being the other side opposite of the hard drive location
LOL when I heard him say just snap it I was like fu@# no
10 year old video but still helped me open up my xbox 360 and make it work again. Thank you!
took my 2nd hand xbox apart using your video to clean the fan and everything worked after putting it back together. thanks, clear and easy instructions
To save ur Warrenty its simple just use a hair dryer to heat it up till your sticker is soft/sticky on the bottom then peel it off slowly then once your done place it back and it looks as if it was never even touched. Just make sure not to over do it.
My sticker actually just effortlessly peeled off.
Good idea.
@@b_radssportscards1824 well i don't a sticker
Almighty how long do warranty’s last?
@@iiieliteiii7840 I believe it's 3 years from the date it was manufactured
t10 screws are the bane of my existence
ALSO REMEMBER TO TAKE OUT YOUR HARD DRIVE SO IT DOES'NT GET DAMAGED!!!
I see a comment that says the exact same thing but is 3 years younger, has 4 times as many likes and 11 comments how did that happen?
yoo this is my comment, we gaming
@@beau2522 tf
Hello
8:51 , i would like to point out that there is a hidden pin under the sticker that releases the bottom one, it is much easier requireing no physical effort
Thanks a lot brother may you family always be happy , you don’t know how much you have helped me ❤❤
Thanks bro
OMG.. thank you so much for this very informative and detailed video. Apparently, at a family party, my mother spilled wine on the top of my xbox. Nothing appeared wrong at first, but over time it appears (now) that the DVD drive had become 'sealed' by rotting/drying residue wine. Other videos talked about the regular 360 and your video shows the slim model (I have the Halo Reach edition). Long story short, I fixed mine.. thanks to this video!!!
ive always wanted to void a warranty! that moment when you slice the warranty sticker in half is so awesome!
If the warranty is already expired then it is
Or what about us spooky ghosts 5 years into the future
I found this VERY useful and used it as a walk-along guide as I tore mine down. I really just wanted to drill wall mount holes into the backside to mount it vertically against my wall, but wasn't looking forward to take it apart on my own. This made it easy and was well worth the time, THANK YOU!!!
How’d that project work out?
@@nintendude794 it hung like that for a year or so and now it sits horizontally on a shelf
Instructions weren't clear enough. Got my controller stuck in my rectal cavity and I'm dangling from my ceiling fan by my pubes.
You probably used the wrong kind of screwdriver.
Seth Bedford *shaves pubes before following instructions*
Lmaooo 😭😂
Seth Bedford Poor fan.
Seth Bedford Plot twist: the console is fixed
Just what I needed, thank you. Apart, fixed, and back together in under an hour
you are a legend, thanks to your guide on opening the Xbox 360 slim I have now fixed my august son's console thank you
My brothers Xbox 360 ( the gift I got from him) red ringed today
This video helps so much
IT WORKS NOW??
@@Psycho_SugarCraze still needs thermal paste, it was an overheating issue
@@Fallen-Snow when and where are gonna get and apply it?
@@Psycho_SugarCraze whenever I can find some thermal paste
Why do these videos tell people to break the plates loose? thats what the holes in the plates are for to stick a dental pick or small screw driver into release the snaps. The holes are right over the snaps just pop them and release the whole plate no need to break anything off.
Did this and a hour later the Xbox broke. I swear every time I try to fix something I end up breaking it beyond repair
Keith Grenier same with me!
Keith Grenier same
if you want to take something apart, take it apart for the parts, not to fix it
I hear you all i need to do is clean the power suply but im scared it'll cause my Xbox to explode
no
thanks for making this video, my cat thought it would be fun to play with my disk tray when it was open and messed it up. so I looked up "how to take apart an xbox 360 slim" then your video came up. was honestly very helpful so thank you again
Thanks to your video I was able to take my 360 apart, clean it and put it back together in about 30 mins!
"But you're actually breaking a bit of plastic"...
Why do you think the little apertures line up exactly over the tabs you need to pull aside? The holes are there for one and one reason only: to give you access to those tabs. And yet, you remove the entire plate instead of just sticking your screwdriver through the holes and pull aside the tabs? If plastic is welded shut on a device that the manufacturer needs to be able to open up for repairs, it's a pretty good sign that breaking the welds is not necessary to access the inside.
If that's the way you do it, fine, it's your xbox. But don't go on RUclips advising others to break their consoles too when it's completely unnecessary.
Bless you! now link me to a better guide please. i need to view my motherboard to know the model
Yeah, I was confused as to why he was doing it like that on video when I was able to do it without breaking the parts. Unfortunately it seems this is also in the guide ifixit posted on their website.
انبوكسنج
Yeah like they welded the plastic after putting box together. 😂😂😂😂 If you would use your brain you would realize that those plates are part of the side rims and as you pull the rim off it comes of with it 😂
Well said Juan
Nice Video, helped me too. One thing I noticed, the flat head holes that are part of the inner plastic piece that is plastic riveted to the outer shell, if you put a small flat head down into those holes, you can release the clips that hold the inner and outer shell out at once. This way I didn't have to break any plastic rivets.
Lol if you watch it backwords you can see how to put an xbox together
How do you watch it backwards
you dont
right that would've been my next question
Bone apple tea.
@Ellis he spelt it right dumbass
This was very helpful in getting inside our child's Xbox 360 to fix a small piece that had broken to hold the switch for opening and shutting the disc drawer. Thank you. I could not have fixed it without this video.
THANK YOU SO MUCH this video has been really helpful. My xbox 360 slim recently got the red ring of death a year ago and I've been meaning to take out the dvd rom drive to swap it out with the broken dvd drive one in my fat xbox 360. Your video helped me a LOT with the disassembly. thank you once again, warm regards from Jakarta, June 01, 2024.
I remember doing this and i ending up with bloody knuckles lol
I just did it now and i have blood in my knuckles lol
@@D3adSh0t442 @Blake Kruger Me too but... my xbox will not power on at all now I kind of figured that would happen. Any suggestions?
I wasn't as patient as you and just aggressively ripped those plastic panels off.
You don't even need them.
Did you break them ?
Datz nu gud
thank you for the video! This method worked out well! Whoever can not figure this out either went to fast, or was not gentle enough. Yeah you have to improvise a bit, I used the same screw driver to take the whole thing apart. I didnt break anything! Usefull video, just go slow
I went slow, now my xbox IS FUCKED!!!
Bro you’re actually the goat ngl thx so much
this is the first time an instruction video made accurate predictions, yes, my console is suffering from the red dot of death, yes, like the male technophile I am, I tried to rush in blind and backwards, after taking a few plastic chunks out of the cover, I swallowed my pride and looked for an instruction video, you deserve my like
Microsoft didn't want you to repair this console
You are an amazing person! Thank you for this detailed video, you're a life saver!!
I couldn't figure out how to put it back together so I played the video backwards 😂
Hit the nail right on the head. Looked for screws or divots any type of opening and found nothing then saw your video for help. Thanks for this.
Thank you to this video. No one wanted to fix my daughter's XBox Disc drive door. This video taught me how to take apart the unit to get at the drive. Now my daughters XBox is alive and kicking, and no spare parts. LOL
Holy shit. Thanks so much.! Hah best vid. I've seen so far and I was able to fix it.!
Thanks for this, I finally got round to giving my 360 elite a clean up. Sound so much better
Anyone else cringe when he didn't take out the hard drive
Joseph KERR yes
Joseph KERR I screamed when I realized he hadn’t, I cringed when he snapped the clips. There are tools for a job like this, use them!
Wait I was supposed to take it out? Fuckfuckfuck
Qwamqwamasket Ilmixum I don’t know, the pick seemed to be the right tool for the job. Not like he broke anything.
Yep
this was very helpful for my family and I. Needed to fix the drive, your video saved time, money, and a trip to repair shop. Thanks...The Buford Family
Just came across this video and wanted to point out that you don't break those side frame clips that are 'melted' together, you just need a long skinny flathead screwdriver to release the six tabs.
Well I decided to open mine and I noticed feathers in it. My parakeets feathers built up in their so much I got the red ring😠😂
Rodrigo Torres Jr did you take it out?
Throw your Xbox and see if it flies🤔
oh yeah yeah oh yeah perfect fix 👌
Dude did you fix the red ring by cleaning it then?
Mines got the red ring of death to (but from dirt and bugs
thank you for this simple and easy tutorial to follow through , I watched it while I was disassembling my own Xbox , and I gotta admit those melted things was a bit of annoying I gotta say too and now it's reassembled and good to go , I just wanted to clean it inside
Same
I can't do it... I'm afraid I might break my baby, I just want to clean her up
Well if you want to clean her up you have to take her apart.
@@johnboko7110 update. She's actually clean
@@RedStickerz Good
@@RedStickerz I'm afraid too, I'm so stupìd with electronics :/
My disk got stuck in the drive and this video made it possible for me to get it out. Xbox still works great after I put it back together. Thank you.
Omg man your a life saver it won't take the games it keeps saying open tray and I didn't know how to take off the cover thank you man now it's time to try and fix it
Tip: Pusing a thumb tack through a certain point it releases the second clip with ease
Thanks soooo much for this vid. Unfortunately I had to take aparty Xbox to get out a grain of rice...
was u that hungry lol
@@ss4kaioken295 LMFAO
This video was very helpful thank you :D
Great tutorial. By the way, it's called a Torx screw. T-10 = Torx bit. And the little sticker on the back side is not the security sticker - breaking the warranty. It's the round sticker on the inside covering one of the long Torx screws - unsecuring the metal box from the bottom plastic frame. Thanks for the help!
This helps alot! Got a new Xbox for cheap. It was hella noisy, so I just cleaned it out thanks to this tutorial
I've had my Xbox 360 since 2009 the slim model and I've had no problems with it and it in great condition
This was made in 2019
I cut myself on the back of my index finger when taking off the melted plastic part. I just got out of the shower, sitting in my LEATHER office chair at the desk doing this in nothing but my undies and Spotify's shuffle function made my metal go to some sad fucking song I had saved in my favorites to use in a video.
Opening up your xbox to clear it from dust like me?
Expect blood, sweat and tears before you even have it opened.
Anyone still playing x360 in 2024 ?
I would be if it wouldn't be overheating
Yes!!! Unfortunately mine shuts down every time I switch it one. So I'm trying to clean it and get it working again
Yeah😢
Sadly
Yes! It works great so 👍
My brother got grounded about 3 years ago and was on the Xbox illegally. He happened to be either putting in or taking out a disc and long story short he jammed the disc tray. Thank you so much.
You are a million in one. You are the best one on RUclips who showed me how to do this. Thank you so much for your help!😀👌
That intro freaked me out... You read my mind.lol. O.o
Oh my gosh I hate Microsoft soooooooo much. That's absolutely the stupidest design I've ever seen and I design this kind of thing for living.
Yeah I'd be fucking pissed too if I had to open up one of these. The xbox arcade was pretty easy to open
Shyzah you mean the first xbox?
***** I know right? They don't think the system will ever need taking apart (before you throw it away and buy the new one that is).
***** xbox gets taken down by lizards just as often as sony. These bastards think they are clever with their ddos "attacks". I use both consoles. They both have their strengths and weaknesses but I'm a gamer. I don't care very much about what system or company makes the hardware and how much megadrives and floppy ram they have. I just care about whether or not my games are fun at the end of the day.
***** Yeah I got mine by wheeling and dealing on craigslist.
Lol i have mine about 9 years and this is first time am cleaning my xbox 360 slim
Am not doing it for dust am doing it cus my fan got stuck
Lasha GG my fans stuck too is yours fixed after watching this ?
@@agohs3901 yeah fixed it long time ago there was so much dust in fan and needed clean...
I was able to finally clean my 10 year old Xbox and I’m so excited to see all the stuff I left on it
Ugh almost 2019 and I'm trying to fix my newly red ringed xbox 360
same
I just found my brother old Xbox 360 like the one on the video and when I connect to the power the power brick have no light on it it won't start up do I need to buy new one or I can fix it I just want to play old games like Halo
Me too
Same
sigh 2020 and im afraid i have a bunch of crap in mine...power isuues i think...wish me luck...or its 100 bucks on a second hand with a bunch of games i probably already have lol
dont even need to do this i was just bored and wanted to open it
1:00 Easy?! NOOOO its harddddddd
Your a legend! I had 2 xbox 360's but 1 was broken and the other worked but had snapped plastic on the fan grill outlet so watching your video I now have 1 that works and also looks great. Thank you, I have liked and subscribed.
My 3 year old shoved a pen into the fan, if it wasn't for this video I would've probably trashed the machine. Thank you for this, you've saved my xbox and sons life 😁
Thanks a lot man! I needed to get a disc out.
You know there's a little button that ejects the disk, right?
FoxTailious The Ultimate Gamer Haha my X box broke after years of hardwork. I had to get it out unconventionally.
+Crappy Nappy You didn't try to hit the top of it then press the eject button?
Itz Diinoh Yes. There wasn't much point my xbox was completely dead
Ahh ok
Thank you. Now my Xbox doesn't even turn on!!!!!
Nobody forced u to do it, bastard
Yep this is why if you are sure you can do it do it but if you don't have a clue of the outcome then why do you do it also I have the red ring of death wish me luck to fix it
Probably due to a loose cable.
Im having trouble snapping the welded parts
Carnigee Ingram Yeah dont, you don't have to break them, this is a bad guide.
@@noneofyourbusiness7965 i feel like he may have already snapped them by now 😂
Danmoh Probably so... lol
@@noneofyourbusiness7965 Yeah, bit late telling him/her 5 years after the fact lmao
@@jonnywilson9117 True but maybe another person will see this comment chain.
thanks for making this i was able to watch step by step and make my Xbox 360 an ultimate gaming machine!
Greeting from Denmark.
Thank you for helping me repair my xbox.
PlayStation users: *laughs in Japanese electronics*
I remember breaking my disk tray while arguing on halo combat eveolved back in 2010. Now I can dice the disk tray
uhhh, you clearly dont know how to take apart anything of value. you dont have to break ANYTHING to disassemble this console
People like you are angels without wings
Time to finally clean it out after 11 years, it survived countless spills, drops, the three red lights of doom. Wouldn’t be doing it any respect if I didn’t give it a little service
I'm stuck on the hidden tabs where the hard drive is I just can't seem to find anything what can pull the tab out.
same, but it'll eventually come through
What the fuck is the point of having torx screws? They just make our lives a big pain in the fucking ass.
But they're impossible to strip about lol
SiRe Breezy True, but a pain in the ass nonetheless.
SiRe Breezy I stripped the torx screws on my 1st modded xbox by using a drill and a torx10 bit for quickness XD
***** You could do it for me.
***** So are you gonna do it or not?
I was taking it apart until you needed the security screw driver he could of mentioned it at the beginning
i just ripped the black plastic off
Thanks a lot man! Dropped my Xbox and my disc tray wouldn't open, took about 40min to fix. Totally worth it
Dude you’re a lifesaver I would have eventually found out but you save me a lot of time I had an Xbox collecting dust for a couple years and don’t have the money to get a new system so this will help out a lot thanks I subscribed liked and hit the notification bell
Why are all 360 so fucking hard to open??
PS3 isn't and the first Xbox wasn't either.
for reasons of modding they were going to make it un open able
I know the xbox elite was easy as fuck to open. I put the ghost case on it with blue LEDs and a wisperer fan with blue LEDs, IT WAS FUCKING AWESOME!!! they have it for slim but not worth it in my opinion. microsft should have just made as easy to open as the elite. and with slim being hard to open, I don't want to talk about opening an xbox one 0-o
xbox one = so easy to disassemble
TECHTREK (OSSpecialists) as easy as the 360 elite?
yeah actually its what i call the rip and pull opening (not really rippign and pulling)