Started watching your video and as soon as I recognized those mountains behind you I knew you were in Utah near Bountiful. Lived there when I was a kid. Sure miss those views and the great fishing. Thanks for the vid.
Hey! Great video!!! I like how you show everything form purchase to application. You took a lot of time to plan this out. Great enthusiasm as well. Thanks for the tips.
Great video and tips! I use the Gulp 1" smelt all the time, they're great! Never though of using it with the Trout magnet which is the perfect sized jighead! Trying this out this weekend! 😃🐟🎣
You should try feather or hair jigs in 1/80th to 1/100th. You have to tie them yourself though but I’ve been slaying. The overall jig length with the hair is less than an inch. The trout love it!
Hey liked your video also there is a bobber made by betts which has a rattle in it it is made for crappie fishing just don’t tell the trout but think about it a little rattle with a power bait below or a pink power worm ringed with hook point in egg sack toward head of worm it fishes horizontally and drifts down think about it
Great tip, ty. I can see why you " catch and release" , .... @ 4:54 looks to be a Dill doe floating and a lot more trash too. Kinda didn't want to mention it but wheww that looks terrible in the middle of a decent vid.
I was at Bountiful Lake two days ago and caught Flatheads right next to the boating ramp. Also caught a carp on the south end of the lake by the dock. Is there a specific spot on Bountiful lake that you like to fish for trout?
Hi man great vid i just started fishing in salt lake moved here from florida, thank you for the tips i have been having a hard time catching them, perhaps your advice will improve my catches
These floats are actually supposed to be used by threading the line through the peg while in the float. Then to secure it you pull the peg out and pull a loop in the line and pinch it between the peg and float. This prevents losing parts and also allows the float to release on the hookset if you are fishing deeper so you can reel the line in further.
I absolutely love jigging this all the way back like a wounded minnow! Strikes after strikes. I’m a firm believer if the fish are there they will bite this.
I've been using this rig for years. Best if used with 4 lb test line. And with no bobber. I use a 9 ft rod and jig the heck out of it and slaughter the trout.
At the North east portion of Bountiful Pond is a parking lot with a stream running parallel to it. That stream feeds into the pond which is the reason so many fish are found right at the inlet, try it out and let me know how well you did, fish on brother
Good video. Really enjoyed it. But remember a trout is not a bass. Don't lip it if your going to release.
Started watching your video and as soon as I recognized those mountains behind you I knew you were in Utah near Bountiful. Lived there when I was a kid. Sure miss those views and the great fishing. Thanks for the vid.
Hey! Great video!!! I like how you show everything form purchase to application. You took a lot of time to plan this out. Great enthusiasm as well. Thanks for the tips.
That’s a good stocked Walmart. Mine has nothing like that. Or just plain nothing. Awesome video
Greg Witte yup. Still nothing a few rods and reels but Dicks sporting goods is loaded.
Epic video really like how you show all the steps break them down super easy. Will add to my trout fishing arsenal.
Excellent video and can’t wait to try this rig. Much appreciated. Thank you 🙏
I wish my Walmart carried trout magnets.
Wow! I need to buy these stuff and try catching some stocker trouts!
Glad to see another utah fisherman
Great video and tips! I use the Gulp 1" smelt all the time, they're great! Never though of using it with the Trout magnet which is the perfect sized jighead! Trying this out this weekend! 😃🐟🎣
Thank you for the tip. A combination of 2 excellent baits. A microscopic swim bait.
You should try feather or hair jigs in 1/80th to 1/100th. You have to tie them yourself though but I’ve been slaying. The overall jig length with the hair is less than an inch. The trout love it!
Hey liked your video also there is a bobber made by betts which has a rattle in it it is made for crappie fishing just don’t tell the trout but think about it a little rattle with a power bait below or a pink power worm ringed with hook point in egg sack toward head of worm it fishes horizontally and drifts down think about it
Great tip, ty. I can see why you " catch and release" , .... @ 4:54 looks to be a Dill doe floating and a lot more trash too. Kinda didn't want to mention it but wheww that looks terrible in the middle of a decent vid.
When the vid first started i thought you were samoa Joe
Good vid, I don't have trouble slaying the trout but I like ur set up and will try it out to mix it up a bit. Thumbs up!
Good video brother
Hey I just saw you there. I was the kid in the orange jacket. Thanks for the tips!
Very nice and good to see you releasing them. Thank you for the video. A
If you can't remember where you park your vehicle how can you remember what to use to fish with and where to go to fish
I was at Bountiful Lake two days ago and caught Flatheads right next to the boating ramp. Also caught a carp on the south end of the lake by the dock. Is there a specific spot on Bountiful lake that you like to fish for trout?
So its just minnow and float about 18" up with no weight?
Havent seen the selfs stocked that much in awhile :(
Hi man great vid i just started fishing in salt lake moved here from florida, thank you for the tips i have been having a hard time catching them, perhaps your advice will improve my catches
Damn, now I have to go back to the store 😁
Awesome vid
What size line do you recommend with this technique?
65lb braid main line and a 50lb mono leader
good tips. push the hook barb down,
Good stuff man
Nice video bro stay blessed
The free float does the line go into the plastic tube hole? Or just the float itself and put the tube back on?
Ninja k I prefer to peg the float in one spot and adjust it as needed to the strike zone, hope that helps you out, fish on 🎣
These floats are actually supposed to be used by threading the line through the peg while in the float. Then to secure it you pull the peg out and pull a loop in the line and pinch it between the peg and float. This prevents losing parts and also allows the float to release on the hookset if you are fishing deeper so you can reel the line in further.
@@kdpuffer1 .
Snow best time for trout fishing.
Awesome video!!! Just subscribed
You are in UT?!!!!!!!!!!!!!! God, I should subscribe you 2 years early!!!!!!!!!!!! Also, a silly question, what kind of fish you got in this video?
Def best to use a net with trout and never mouth a trout!
Take a drink every time he says 'Ler'
Good video 👍🏼👍🏼
Will this rig work in a stream?
Yes it will
THANK YOU FOR SHARING
With the trout magnet, do you need to jig it at all or do you simply leave it alone once its been cast?
I absolutely love jigging this all the way back like a wounded minnow! Strikes after strikes. I’m a firm believer if the fish are there they will bite this.
hey let me give you a tip put 1 or 2 wax worms or maggots on the hook of the trout magnet you will catch 3 times more fish
those were hemostats, not needle node pliers
nose
I go to Walmart to get powerbait sinkers and hooks.
dudelivestrong and possibly a can of salmon eggs but most likely not
I've been using this rig for years. Best if used with 4 lb test line. And with no bobber. I use a 9 ft rod and jig the heck out of it and slaughter the trout.
xchunter that’s right! One of my all time favorite rigs, hope you enjoyed the video
Don't hold it like that it hurts the fish
I was there too!😁
Great techniques. I'll try it!
What pound line are u using
6lb PLine fluorocarbon has been one of my favorite lines to use for trout & pan fishing, well worth the extra bucks
Where In bountiful pond? Also when did you film that video?
At the North east portion of Bountiful Pond is a parking lot with a stream running parallel to it. That stream feeds into the pond which is the reason so many fish are found right at the inlet, try it out and let me know how well you did, fish on brother
Kenji Prince We just filmed that video yesterday Feb/25/18 in a 30minute span, very fast and fun action, go try it out brother
Dude that fish was out of the water for way too long
You don’t put any weight on this?
nice vid bro
WATCH 2nd King Hyung Jin Sean Moon (Heir & Successor of 1st King SECOND COMING SUN MYUNG MOON) on RUclips at: ROD OF IRON KINGDOM!
Did you also use the trout magnet worms?
Kenji Prince ironically I don’t use the trout worms nearly as much as I use the 1” gulp minnows
Kenji Prince I’ve caught everything from pan fish to trout and even Bass using this Soft Plastic lure, definitely one of my favorite ways of fishing
How much did you pay for the 1 inch minnows, prices are up
That last fish is a dead fish and couldn't survive the time out of the water and rough treatment 😮.
💥💥
Learn how to handle your fish
Nate Hall lipping it’s better then dropping it on the floor
Poor fish handling
He doesn't show set up...
🤣🤣🤣🤣🤣
💪😎👍🎣🐟💦
aaargh dirty trashy water
for real i take trash bags and try to clean up where i fish
If you're worried about hurting the fish, dont handle them like a asshole. Learn how rainbows, browns, specs etc need to be released.
Please learn how to handle your fish 😡
Are you native Americans?
2 hrs to find your car? No