I have to say that out of all of the step by steps i have gone through yours is by far the best...thank u so much for your tutorial and all of your tips!!!! Cant wait to see more!!
Great video! I’m just starting pens and are your pens 100 percent smooth when finished? Or can you feel a little bump or two? Mine is smooth after sanding and with the final coat it never ends up smooth. Thank you
a little tip also. I usually do this for reverse weeding. but if I have little intricate pieces like that instead of trying to lift the white vinyl off of transfer sheet to lay words to pen. (20:06) just apply it all to pen then rub it all down good. then lift off that big piece of vinyl that your trying to separate and all other pieces will be laid to pen. i hope i explained it right so you understand.
Thanks for the tutorial.I love the color. On the reverse weeding I saw in other video that you have to hold the vinyl corner and then you will have just the name in the contact paper. I already order that resin and the light. Can't wait for it. Blessings.
I like using the U4GLORY gooseneck curing lamp…. It clips on the table or wherever but it has to be plugged in a usb box plug but it’s the best I’ve used to cure us resin so far 😊
I normally use the reusable plastic straws to hold my pens but where can you get the wooden ones? I looked at target but couldn’t find them. Also how long does it take for UV to cure? I have to make a big bulk order and it’s my first time using UV resin.
Hello, love the video! I am having an issue with the UV resin being thicker at the ends of the pen, do you have any recommendations for that? Even after sanding the ends seem bigger than the middle
My best guess is that you’re using too much resin. I’d start out using the bare minimum and build up as you go. It will definitely pool at the ends. But if the ends are building up take the time to sand them down before adding more resin. You might even need to use a little courser sand paper on the ends to cut through the buildup faster.
Great video! @Kristina Forbes/Logue and the Beehive 🐝 really started this trend. She also shared what resin & light to get! She’s so generous with everything she does!
Yes, that's where I got the recommendation for both the UV resin and the light! I even saw her sanding hack for using a large hole drill bit to sand tumblers.
You can use regular epoxy, it just takes longer to cure and you’ll have to have a turner set up to keep the pen moving. Personally I find it easier to use UV resin.
I have a 3D printed adapter that I made to fit the drill. There’s a short video of it Tiktok. Same concept, still using a dowel rod, but the drill doesn’t compress the printed adapter like it will the dowel by itself.
Oh man, and I thought I was a perfectionist! 😂 Phew! I’m tired from watching this video. I need a rest. 🤣 Awesome video though. Not sure I would sand and epoxy to perfect every tiny ripple, but I completely appreciate the obsessiveness. 🤓👍🏼
There’s always going to be imperfections. Yes, I’m a bit of a perfectionist too. I don’t mind sanding with the drill though. It’s really quick and makes the pen feel better IMO. Plus sanding early keeps me from ending up with big bumps from layers of epoxy building up.
Great video how long did you cure with the light? Also would you mind sharing the size of the name. sorry I'm new at this and excited to give to my granddaughters. Thanks
You could try, but it might be difficult to get the glitter dense enough with it mixed directly in the epoxy. Thin coats help keep the pens from getting too much epoxy built up. Plus excess epoxy will run and there’s no way to contain it like the bottom of a tumbler. But let me know if you try it and how it worked. I’m curious to know if it’s a better approach.
@@lonestarcraftercompany2620 are you using epoxy or resin? I thought you only need to use the UV when you're putting a resin over it in your ceiling it not when it's just plain glitter? Great video thatnk you
@@TheBenzoHouse I like to use UV resin for my pens. Of course you can use regular epoxy, it just takes time to cure and requires spinning to keep the epoxy level.
It makes it a lot easier to glitter/epoxy because you won’t have to work around it. But I wouldn’t say it’s “required”. IMO it’s just easier to remove it.
Yep! It's basically the same stuff they use in nail salons. The only time there's an oder is while it's curing, and that's only for about 2 minutes and it's very light, depending on the brand. You can alternatively set it out in the sun for about 10 -15 minutes and avoid the smell.
I know this was posted awhile ago- but since watching recently I’ve been obsessed with the blue craft knife (exacto knife) to the left side of the screen. Wondering if you post a link or brand or something please :)
I’ve seen people on other videos using a jar of water and their UV light to cure the resin on their pens. I haven’t tried it yet, but it seems that it could be another option. I’d Google “using water to cure UV resin”. I know there’s videos out there.
You can use waterslide paper, printable clear sticker paper. Those are 2 that I can think of right off hand. Just be aware that you'll need to seal the waterslide paper if you use an inkjet printer.
No you don’t. You just need a UV light. I like this one that was recommended by Kristina Forbes. I even put my pens outside to finish curing if it’s sunny.
It could be a few things, including the resin you’re using. The one I’m using in the video will leave a tacky residue if I don’t expose it to additional light. I use the flashlight to basically set the resin. After I either put the pens outside for natural UV exposure or place them in my PhoneSoap UV sanitizer. Both removes that residue. Some say to wipe down with alcohol, similar to the top coat with gel manicures. It’s not what I do, but it’s something else to try.
I’m not sure. I haven’t tried it. I guess the first question would be if you can remove the insides of the pen. It would be difficult to epoxy the outside with it all together.
Yes, UV resin will cure in direct sunlight. I like to use the UV flashlight just to set the resin initially. If it's a sunny day I'll put everything outside for a little while.
@@MysticMerGirl yes, this is her. She shares so much info in her FB group. I first saw her on TikTok a few months ago showing her hack for sanding tumblers with a drill.
Do you mean the UV box that I'm using? That's a PhoneSoap that uses UV light to sanitize objects larger than a phone, like an iPad, tv remote, etc... It's 100% not necessary. I have one and use it occasionally, especially when I'm in a bit of a hurry or I can't put my pens outside to completely cure. You don't need it to cure your UV resin. I just put it to use since I already have it.
I put mine in the phone soap UV sanitizer for a few minutes or outside. It seems to get rid of the tackiness and I never wipe them down with alcohol when I'm done.
@@salsalita1024 thank you! I bought mine from Amazon. I have 2 phone soaps, one that fits a phone and the large one you saw in my video that fits our iPads. I use either of them. I can't say one is better than the other, they both work for me. Of course I also put my pens outside if it's sunny. This seems to get rid of any of that "tackiness" from the UV resin I use.
She is also showing a step by step. Teaching and doing it as you normally would are completely different. I can fly through projects but if I need to explain it it can take almost double the time.
That pen turned out beautiful. Thanks for sharing the process.
Wonderful! It makes me happy to hear this.
Great video! Caught a few great tips, thank you!
I love this tutorial. I’ve been wanting to try this but had no clue where to start or finish. Thank you for sharing your gift with me. ❤
that sanding trick with the drill just blew my mind!!! thanks for this tutorial xoxo
I have to say that out of all of the step by steps i have gone through yours is by far the best...thank u so much for your tutorial and all of your tips!!!! Cant wait to see more!!
Great video! I’m just starting pens and are your pens 100 percent smooth when finished? Or can you feel a little bump or two? Mine is smooth after sanding and with the final coat it never ends up smooth. Thank you
I'm still in awe with your sanding hack! Awesome tutorial and thank you for sharing!
Thank you. I made a 3D printed adapter a few months ago that fits into the drill. It’s even better now.
I just love your video! Thank you so much for sharing!!!! You're awesome!!!
Thank you.
Do the inkjoy papermate pens you are using have a rubber coating. I haven't been able to find any without that little rubber comfort grip on them.
The sanding! Genius!
loved the video. very detailed and the tone of your voice was great. thank you for sharing
Thank you for the kind comment. I tried to not gloss over stuff and take enough time to explain things… but let the video drag on for an hour.
a little tip also. I usually do this for reverse weeding. but if I have little intricate pieces like that instead of trying to lift the white vinyl off of transfer sheet to lay words to pen. (20:06) just apply it all to pen then rub it all down good. then lift off that big piece of vinyl that your trying to separate and all other pieces will be laid to pen. i hope i explained it right so you understand.
What is the silver picker thing? Thanks for the tutorial!
Thanks for the tutorial.I love the color. On the reverse weeding I saw in other video that you have to hold the vinyl corner and then you will have just the name in the contact paper. I already order that resin and the light. Can't wait for it. Blessings.
Good video nice pen and good idea the box, thank u for sharing your knowledge
So much time and money spent on this item!
I like using the U4GLORY gooseneck curing lamp…. It clips on the table or wherever but it has to be plugged in a usb box plug but it’s the best I’ve used to cure us resin so far 😊
If you use jewelry wire cutters for the clip it doesn’t leave anything behind.
i was just about to post that. i twisted the first one and said hold up. lets make this easier on my fingers. lol
They're called flush cutters. I picked up a pair from Walmart for a few dollars.
Gorgeous!!!
Hello from Spring, just north of you! You sound a lot like a lady that makes nail videos that I have been watching for years!
Did you spray painted the pen?
Also, the uv resin link doesn’t work. What is the name of it?
Very pretty, how many coats did you wind up doing?
Great video! Thx for sharing!🦋🌸
I normally use the reusable plastic straws to hold my pens but where can you get the wooden ones? I looked at target but couldn’t find them. Also how long does it take for UV to cure? I have to make a big bulk order and it’s my first time using UV resin.
How do you fill in the hole where the clip was attached? Thx
Hello, love the video! I am having an issue with the UV resin being thicker at the ends of the pen, do you have any recommendations for that? Even after sanding the ends seem bigger than the middle
My best guess is that you’re using too much resin. I’d start out using the bare minimum and build up as you go. It will definitely pool at the ends. But if the ends are building up take the time to sand them down before adding more resin. You might even need to use a little courser sand paper on the ends to cut through the buildup faster.
Great video! @Kristina Forbes/Logue and the Beehive 🐝 really started this trend. She also shared what resin & light to get! She’s so generous with everything she does!
Yes, that's where I got the recommendation for both the UV resin and the light! I even saw her sanding hack for using a large hole drill bit to sand tumblers.
Started this trend? Been making pens for a long time.
What are the measurements for the vinyll decal?
Do you have to do the UV light? I’ve never seen it done.
You can use regular epoxy, it just takes longer to cure and you’ll have to have a turner set up to keep the pen moving. Personally I find it easier to use UV resin.
Did you paint the pen before adding the resin and glitter??
Yes, I sanded and painted it first.
Hi, just wondering what size dowel did you use to hold the pen? Thank you for sharing! 🤗
Wow cool video that's an amazing hack with the drill
I have a 3D printed adapter that I made to fit the drill. There’s a short video of it Tiktok. Same concept, still using a dowel rod, but the drill doesn’t compress the printed adapter like it will the dowel by itself.
@@lonestarcraftercompany2620 do sell a stl file or a g code for the adapter
@@christiansiddons2121 I haven’t, but I could add the stl file to my Etsy shop.
Sparkly memaw glitter is my favorite
Wonderful video and tips!!!!
Oh man, and I thought I was a perfectionist! 😂 Phew! I’m tired from watching this video. I need a rest. 🤣 Awesome video though. Not sure I would sand and epoxy to perfect every tiny ripple, but I completely appreciate the obsessiveness. 🤓👍🏼
There’s always going to be imperfections. Yes, I’m a bit of a perfectionist too. I don’t mind sanding with the drill though. It’s really quick and makes the pen feel better IMO. Plus sanding early keeps me from ending up with big bumps from layers of epoxy building up.
Great video how long did you cure with the light? Also would you mind sharing the size of the name. sorry I'm new at this and excited to give to my granddaughters.
Thanks
I think it was "I Love Glitter" font. Not certain the size, but I try to keep the height at .50" to .60" max.
What size do the vinyl
I'm wondering can you mix the glitter and resin and apply it that way? I do that for my cup bottoms when making Snowglobe tumblers.
You could try, but it might be difficult to get the glitter dense enough with it mixed directly in the epoxy. Thin coats help keep the pens from getting too much epoxy built up. Plus excess epoxy will run and there’s no way to contain it like the bottom of a tumbler. But let me know if you try it and how it worked. I’m curious to know if it’s a better approach.
@@lonestarcraftercompany2620 are you using epoxy or resin?
I thought you only need to use the UV when you're putting a resin over it in your ceiling it not when it's just plain glitter?
Great video thatnk you
@@TheBenzoHouse I like to use UV resin for my pens. Of course you can use regular epoxy, it just takes time to cure and requires spinning to keep the epoxy level.
Is removing the pen clip required?
It makes it a lot easier to glitter/epoxy because you won’t have to work around it. But I wouldn’t say it’s “required”. IMO it’s just easier to remove it.
How do you deal with air bubbles? I am having trouble with a torch.
Is this safe to use around kids? I’m trying to find a quicker method for pens versus brite tone.
Yep! It's basically the same stuff they use in nail salons. The only time there's an oder is while it's curing, and that's only for about 2 minutes and it's very light, depending on the brand. You can alternatively set it out in the sun for about 10 -15 minutes and avoid the smell.
Amazing tutorial!!! It answered all my questions!!! Thank you for the detail and tips!!! Just one question, how much do you ask for a pen?
I usually ask $12 unless it’s elaborate then I’ll ask $15-$20. Depends on how many glitters I use and how much vinyl I use for decals!
I know this was posted awhile ago- but since watching recently I’ve been obsessed with the blue craft knife (exacto knife) to the left side of the screen. Wondering if you post a link or brand or something please :)
It’s a Recollections brand craft knife from Michaels. I like the handle, it’s more ergonomic than a plain metal xacto knife.
Love the drill idea!
Hi there, love the tutorial, I was just wondering if you have to spray paint the base coat or can you use nail polish base coat.
I don't know. I use spray paint because that's what I have and it's quick. You could probably use acrylic paint for the base too.
Where did you get the uv resin
Wondering if triple thick would work in place of resin?
Thank you for a great tutorial.. Can you tell me what font you used? Loved it
It's called "I Love Glitter".
@@cmjamal I love love love this tutorial! What size font did you use for the pens?
the uv resin link doesn't work
Can you use acrylic paint instead of spray paint
I've used acrylic when I didn't have the correct color spray paint. It just took longer to dry and I had to do a few coats to cover.
Hello! Love your tutorial. If we don’t have the phone soap or sunlight what would be a good alternative?
I’ve seen people on other videos using a jar of water and their UV light to cure the resin on their pens. I haven’t tried it yet, but it seems that it could be another option. I’d Google “using water to cure UV resin”. I know there’s videos out there.
How about the sun? It’s free
Las cajas de los bolígrafos donde las puedo conseguir?
What kind of sander block is that
Complete newbie, help! I don't have a cricket. Any suggestions for alternatives to put names on?
You can use waterslide paper, printable clear sticker paper. Those are 2 that I can think of right off hand. Just be aware that you'll need to seal the waterslide paper if you use an inkjet printer.
@@lonestarcraftercompany2620 going to try Waterslide, thank you!
Approximately how long does it take the resin to dry in between coats?
I'm very new and might be doing it wrong, but it takes me 90 minutes to fully cure with a melodysusie uv lamp and michaels uv resin.
Why don’t you do the tip???
How long do you use the light each time you put the resin on?
Do you have to use the Dulex?
No you don’t. You just need a UV light. I like this one that was recommended by Kristina Forbes. I even put my pens outside to finish curing if it’s sunny.
Why does my pen feel sticky after I use the UV light? How do I get that to go away?
It could be a few things, including the resin you’re using. The one I’m using in the video will leave a tacky residue if I don’t expose it to additional light. I use the flashlight to basically set the resin. After I either put the pens outside for natural UV exposure or place them in my PhoneSoap UV sanitizer. Both removes that residue. Some say to wipe down with alcohol, similar to the top coat with gel manicures. It’s not what I do, but it’s something else to try.
Could you cure it outside in the sunlight without the light?
You have to cure it with a light to start it off then you can finish with Sun.
Can you say where u got your exacto knife?
It's one I found at Michaels. I think it might be Recollections or Memory Keepers, can't remember for sure.
Why the sanding after resin? Did I miss why you said it lol thank you
I'm just sanding it to even out any bumps. A fine grit wet sand paper works great for a final sanding.
Great tutorial… Can you do this with Frixion erasable pens or other pens?
I’m not sure. I haven’t tried it. I guess the first question would be if you can remove the insides of the pen. It would be difficult to epoxy the outside with it all together.
Can you cure the resin outside in the sunlight (without the light)?
Yes, UV resin will cure in direct sunlight. I like to use the UV flashlight just to set the resin initially. If it's a sunny day I'll put everything outside for a little while.
@@lonestarcraftercompany2620 Thank you!!
How long do you you use the light on the pens?
does the grip not start to peel for anyone else when sanding?? lol
What size font do you use
I try to keep the height around 1/2”.
@@lonestarcraftercompany2620 thank you
Can you please share the information for the crafter you learned this technique from? A shout out would be nice.
If you look up UV resin pen on RUclips it’s the first video, a vertical video.
I believe it’s @Kristina Forbes 🐝
@@MysticMerGirl yes, this is her. She shares so much info in her FB group. I first saw her on TikTok a few months ago showing her hack for sanding tumblers with a drill.
What size sand paper
I use mostly 200 grit blocks.
Why do you need a pen box?
Do you mean the UV box that I'm using? That's a PhoneSoap that uses UV light to sanitize objects larger than a phone, like an iPad, tv remote, etc... It's 100% not necessary. I have one and use it occasionally, especially when I'm in a bit of a hurry or I can't put my pens outside to completely cure. You don't need it to cure your UV resin. I just put it to use since I already have it.
How did you cut the name
I have a Silhouette Cameo. I use that to cut my vinyl.
You are using UV resin not epoxy resin. Two different resins and may get people confused even though I know this is two years old
Mine came out a little tacky the resin I don’t know if I have to put it under the lamp again
I put mine in the phone soap UV sanitizer for a few minutes or outside. It seems to get rid of the tackiness and I never wipe them down with alcohol when I'm done.
@@cmjamal where did you buy your phone soap sanitizer. Also where did you buy gift boxes.
I really enjoyed your video.
@@salsalita1024 thank you! I bought mine from Amazon. I have 2 phone soaps, one that fits a phone and the large one you saw in my video that fits our iPads. I use either of them. I can't say one is better than the other, they both work for me. Of course I also put my pens outside if it's sunny. This seems to get rid of any of that "tackiness" from the UV resin I use.
This is a 30 minute video for one pen? Is this how long you really take? How much can you even really sell this for that'll be worth the time it took?
For one pen it may seem like a lot of time. I can make several at once and that really cuts down on the time per pen.
@@lonestarcraftercompany2620 can this be done without UV light...just drying it under sun rays??
She is also showing a step by step. Teaching and doing it as you normally would are completely different. I can fly through projects but if I need to explain it it can take almost double the time.
I noticed the resin that you used doesn’t need to be mixed. Do you know if it’s toxic like regular epoxy?
With UV resin no mixing is involved and is non toxic. It does have a light odor smell, but opening a window will take the smell away