Evolution Rage 5-S table saw review
HTML-код
- Опубликовано: 2 июл 2024
- This Rage 5-S table saw was kindly sent to me by Evolution power tools for me to be able to complete some projects, so here is the review of it. I did have the Evolution Fury 5 before this table saw but it often got in my way (despite installing wheels on to the base), it just took up too much room in my garage. The Rage 5-S is easy to stow away in the corner of the garage and so it is perfect for what I need. The Rage 5 is an awesome machine and I really like using it, the dust extraction is superb and the sliding carriage makes cutting straight pieces very easy indeed. I did buy another blade for this machine as I often cut a lot of acrylic for small projects around the home, the blade was bought from a seller on Amazon and has 120 TCT teeth which gives an excellent cut.
Here are a few links to help-
Rage 5-s for sale on ebay- fave.co/2rwuuzY
Rage 5-s for sale on Amazon fave.co/2rwpdIw
This is the 210 teeth blade that I use on acrylic- fave.co/2rwAngH
For more information on this machine please see here- www.evolutionpowertools.com/uk... 
Хобби
I have had my Rage 5-S for about a year now and found it to be a brilliant machine. Thanks to your (as usual) great review, I have learned a few tips to get even more out of my machine. Thanks.
You are welcome Jim, Thanks for the comment
Thankfully
the extended weekend has given me chance to film and edit another video. This saw was kindly sent to me by Evolution!
This is quite a long video and took hours to film, edit and upload; I hope that people find it useful. Enjoy the Bank holiday Monday everyone ;-)
I’m off out now for some DIY materials, so it could be a while before I reply to any comments.
Please like, share and comment if you can!
Fantastic and thorough review. Probably the best video review of this saw on the whole of the internet. Thank you.
You are welcome
Thanks for the comment
@@ultimatehandyman😊😊😊😊
Super piece of kit, extremely impressed. Have a job to do on the stairs and this is top of the list for my next power tool purchase.
Thanks, Mark.
I love this machine, it has enabled be to do a lot more cutting than I could have done before!
Thanks for the comment
That is a fantastic machine. I would love to have one of those. Great job with your demonstration of the saw. I think that you covered everything about it very well.
Thanks for sharing
Hi Roy, yes it's a great machine and has made my life a lot easier ;-)
Thanks for the comment
I have really enjoyed learning from you about the saw. Your presentation is clear and at a good pace. Thank you.
You are welcome
Thanks for the comment 👍
My buddy had to buy his and it was money well spent as its a blinding bit of kit, I'm saving hard so I can buy one too, thanks for taking the time to Film, Edit & Post it's really appreciated Fella
You are welcome ;-)
Thanks for the comment
I've gotta say, I was blown away when he stuck that steel in there...I had no idea table saws could do that. I'm getting myself one. Dam, I'm excited
Yeah, the evolution saws are great at cutting metal ;-)
Greetings from Bavaria, thank you very much for the test.
I've had one since Saturday too...
You are welcome.
Greetings from a rainy (but mild) Darwen, Lancs, UK 👍
Very nice review I've got two evolution saws because of your cracking reviews .
Nice quality review! I wish all reviews were like this concise
I appreciate that!
Great review. Especially showing what the saw can cut, very impressive.
You are welcome
Thanks for the comment 👍
excellent honest review.
evolution seem to make some good tools that have been thought out properly.
Thanks for the review.
You are welcome.
Evolution make some great tools and are always trying to improve them!
Thanks for the comment ;-)
Thanks for getting back,will wait for version 2.0 Then! 😆😆
You are welcome ;-)
Thanks for the comments ;-)
Alan Mullock are they making a second version
New to the channel. Came here for this review specifically as I was looking at this saw. Great review, definitely helped me make my mind up. Thank you from a new subscriber 🙏🏻👍
I'm glad the video helped
Thanks for the comment 👍
I look forward to more videos.Keep it up!
Thanks, I'm working hard trying to make more videos right now ;-)
Thanks for the review! Excellent as ever, covering more aspects than I'd have thought possible. I would never have dreamed of cutting mild steel! I've been toughing it out with an old Scheppach jobbie for years: no fence, no mitre guide, but with patience and a home made fence, you get decent results. I've fancied a new table saw for a while, but just didn't fancy shelling out £500+ on the Dewalt or Makita. I've used both onsite and thought both were gutless and had shitty fences. For half the price, and a decent fence, I'd defo give it a go on your recommendation.
I've used this plenty of times now and it has been a life save for cutting down long pieces.
Thanks for the comment 👍
Great review, thank you! Mine arrived yesterday, can't wait to unbox it and get making! :-) Subscribed.
Thanks, I'm really glad I have this saw as it's been a lifesaver for me!
Thanks for the comment
How is your saw? Planning to buy it
Omg 6mm steel, that's it I've got to go buy one right now thanks for the great review
This has been a very handy saw, it's great for cutting down long lengths of timber/metal etc.
Thanks for the comment 👍
Me too I might never use it but I love tools
One step forward to the purchase of this great machine. Thank you
Thanks for the comment
Looks a good saw and a nice review, got one coming in 8 days.
This has been a very useful saw for me ;-)
Thanks for the comment 👍
Excellent and comprehensive review Thanks
Thanks for the comment 👍
Just bought on your recommendation. Thank you.
I hope you get years of use from it 😉
Thanks for the comment 👍
Such an impressive saw. I want one so bad👍
Yes, it is a great saw ;-)
Thanks for the comment
Hey my Brother I got the same one to,I love it's a great Table Saw to,Awesome Review Bro take care and Happy New Years Family :)
Thanks, you too!
Great piece of kit love it
Thanks for the comment, Tony ;-)
great review, thanks for that..
more ideas for next version:soft start please! better bigger wheels, longer lead, fix that side guard issue and blade guard , all very easy, you got most of it done guys, i reckon my dad would have be happy to give up his old elu site saw (if you fixed what i mentioned, well that and the old geezer has passed on, but i might buy one )
Soft start is a great idea ;-)
Thanks for the comment
Brilliant job sir
👍
great review mate 🖒
Thanks for the comment ;-)
Great Demo 👍🤓👍
Thanks Wayne ;-)
Thanks for the video. I had the same issue with the guard, Nowa solution, thanks
No problem 👍
Great review. Can you put a link to the 120 teeth blade. Woul this blade cut kitchen cabinets with minimum breakout? Cheers
I bought the Rage 5S. First I was excited, so many good reviews. Then, I put it on use. My excitement went down fast. First, the blade was not align (neither perpendicular with the table, neither parallel with the fence) and the wood would get stuck between the blade and the fence, which is a very dangerous situation. I tried to adjust it usual way, but at no moment I couldn't make it to square. Because the blade was not paralel with the fence, the fence tends to move away and the cuts will become highly unparalleled.
This actually occurred when I used a thicker piece of wood (above 4cm). On thin material, the cuts were almost ok.
On the other hand, the motor is fixed on a sheet of steel, fixed with 4 screws above on the table saw, but you can move it with a finger on the bottom side of the device. The blade moves left and right along with this sheet of metal so I assume during operation can't stay straight anyway.
I sent it to service, after two months since I bought it, and they told me it worked perfect. But in case I'm not satisfied with the product, I will be billed 8 hours man-work, because this is how much they spent to adjust it and make 2 cuts.
If you ask me, stay away of this.
Have you contacted their support?
Perhaps the fence has been banged during transit.
@@ultimatehandyman I sent it to the dealer. But is not the fence which is the problem. Is the design. Or something is missing, the engine assembly should lock on, stay fixed after the desired angle is chosen. I cut only at 90 degrees, anyway.
Definitely need a blade guard redesign for thicker materiaks, would be easy to do, also ideally the mains cable could be a socket so you can buy a,longer one. Ive said before the need an elongated hole where the guard mounts to stop the front lifting when the piece is at the rear. Your blade had the wobbles after the lasr perspex for some reason!
Absolutely.
I'm not sure about the blade wobble, I never noticed it when cutting and the material was cut ok- perhaps a bit of perspex was stuck to the blade?
Thanks for the comment
Thanks for the video, impressed with steel cutting abilities. I think this is the saw for me as the next spec up costs about £200 more
You are welcome
Thanks for the comment 👍
Brilliant i love this channel ...
Thanks for the comment 👍
Good, comprehensive video mate. A couple of questions: How accurate is the fence, out of the box, and: are the track guides a standard T track size? Thanks in anticipation .
Thanks.
It's fine for what I do, but I'm not a cabinet maker or anything, I just use it for cutting decking, or cutting down plinth's for my mate ( I don't think he has sussed out, to set the cabinets to the height of the plinth)
I'm not sure about the T slots, it might tell you on the Evolution website.
Thanks for the comment 👍
Good honest review as always. Where do you get your perspex from? I am looking to make some seconary glazing for a patio door, so need some large sheets.
Thanks Miles, I get some from the site where I work but if I need a specific thickness or colour I get it from sellers on ebay.
The best place for larger pieces might be Perspex distribution- www.perspex.co.uk/
Thanks for the comment
Hi
I bought a new evolution rage 5s table saw from amazon uk. It is heavy item than thought, but amazon packaging is not good. Upon just taken out of the box and after initial inspection, i found some issues like its
Rip fence have some (couple of) scratches, i dont know it will make any kind of issues when cutting like thin cutting in wood? So do i need to ask replacement for rip fence or simply ignore it
Also its Guide Rail seems to have loosend (wobble) at the right side, so it moves. I checked at the back to see whether any screws can tightened underneath too keep guide rail tight/ firm with table, but couldnt find any
so i didnt fully unbox it after i saw these issues. Is this minor issues can easily fixed or just returned entire unit?
I am confusing on what to do as i spent almost 330 pound for it
please advise
If it has been damaged in transit you might be better off emailing the seller on Amazon and see what they say about it. I would not unpack it any further if you are not happy with it.
The Rage 5 is a great piece of kit BTW.
Nice looking review, am tempted but am a bit sceptical of the RIP fence. How wobbly is it at the far end that isn't clamped down?
Once you lock the fence in position it is very sturdy. I don't recall there being any movement in it.
Thanks for the comment 👍
The blade guard can be a bit of a pain but you can lift it by pushing the dust extraction port (with the push stick, for example) rather than putting your fingers anywhere near the blade.
Yes, I normally have the blade set a bit higher than I would normally, so that the work-piece can slide under the guard without it getting stuck!
Thanks for the comment 👍
Can you investigate how accurate the mitre slots in the table bed are both in terms of being parallel to the blade and also the flatness and parallel of the bottom of the slot with respect to the table. Is their any adjustment on the saw mounting arrangement to true up the arbour with respect to the table and mitre slots? Thanks for review👍
I'll have a look when I get chance. If I don't answer within a week please remind me ;-)
@@ultimatehandyman Five years later 🤣
Please can we see a video of you fixing machines at work because my best guess is you work at the ICI Perspex plant at Darwen. I visited this back at school.
I'm afraid I can't take my camera on site without getting special permission, I also have to do any filming during my lunch (obviously).
I have filmed a few bits on site though, such as one of the glass washing machines when I bought the Milwaukee ratchet for a specific job-
ruclips.net/video/UQ2gbO2Wynk/видео.html
Then the Milwaukee Impact wrench was used on a oven coarse filter- ruclips.net/video/ZroBFiYbwOc/видео.html
I recently took the Evolution EVO system pump on site when doing a large job at one of their plants- ruclips.net/video/RdDdlPjef6o/видео.html
And someone was once struggling filing keysteel, so I filmed them this video in the welding bay during my lunch-ruclips.net/video/OnVEjJFavfA/видео.html
Thanks for the comment ;-)
It looks very nice but, the cuts are very slow. Is how you do it slow or That is the power of the machine? Thanks
Great review! Thank you for that! Does the blade "wiggle" sideways or would you say it's quite firm?
I am asking because with the evolution Rage 2 i am unable to make precise cuts on Square tubes of aluminum (60x60mm with 2mm wall); when it gets to the lower face/wall, the blade starts to deviate to the right.. :/
I would much appreciate your feedback on this or anyone's who has some experience regarding this.
Tks in advance! Cheers.
The blade is firm, but I did buy an acrylic cutting blade from ebay and noticed that it was buckled- you could only see it when watching the video.
My Rage 2 cuts really well, your blade is not damaged is it?
Thanks for the comment
very well presented.
Thank you kindly!
Hi there, thanks for the videos. Will a stacked dado blade fit in this?
No, I don't think so. I'm sure I read in the instructions that you can't use this saw for that purpose.
Thanks for the comment
I have just acquired a Rage 5s. You mention dust collection is superb. After every use I find a pile of sawdust on the floor underneath the saw. Did you adjust anything in your set up to improve the dust collection. I have mine rigged up to a festool CT26 vac.
I think I get the same, but when I said the dust collection is great, I meant the vacuum collects most of it and prevents it from being airborne and flying all over the workshop.
Thanks for the comment 👍
Bought one and mostly happy with it. Disappointed in that I can’t fit a dado blade stack to the short shaft.
I don't think they like Dado attachments in the UK, they tend to sell saws where you can't use one!
Thanks for the comment 👍
@@ultimatehandyman apparently it’s an EU directive. In order to fit a dado stack, you have to remove the riving blade. I’ll let you know if I make a workaround.
Hi. Great video.
I'm looking into buying one of these saw. I've had a couple from screwfix but all became faulty and have had to return them.
I'm guessing you've had the saw a few months now. Is it still preforming well. Any issue you've come across with the saw?
Thanks.
Thanks David,
What went faulty on your machines?
I don't use mine every day and to be honest I have not used it for the last 8 weeks due to working 2 plant shutdowns, but the last time I used it the machine was fine. I have cut a lot of acrylic on it (with a special blade) and it's been great.
I have not had any issues with it yet.
Thanks for good reviews, Is 120T blade you used is good for cutting 2mm perspex sheet??
Yes that will cut 2mm Acrylic, but you can also scribe break it- ruclips.net/video/8RoAbDcFMrg/видео.html&t
Thanks for the comment 👍
Will you consider doing a table saw safety video please
I'll add it to my list, but I have about 200 videos on it already!
Thanks for the comment
Great review! A have a few questions 1) do they make an adapter for American outlets or an American version? 2) can you use dado blades in it? 3) do they have a diamond blade for use with this?
Thanks, I'm not sure about questions 1 and 3 so I'll try and find out and will post back in a few days.
I don't think you can use Dado blades as they recommend not removing the blade guard from the machine.
Dado blades are illegal on UK (EU) table saws because in order to use them the guard and riving knife have to be removed, and is therefore unsafe. This is not the case in the USA. Because of this, all UK or european table saws are deliberatley fitted with short arbors to prevent their use.
It is sold in the US also. Amazon for one and direct from their Iowa location online.
As a woodworker I would love one,but,that blade Guard! If I buy one and modify it ,will the guarantee/warranty be void? Are Evolution planning an updated version with all bugs fixed? As usual a good ,honest review.THANKS😆😆
Thanks Alan, I'm going to modify mine but it probably would invalidate the warranty.
Evolution are constantly redesigning and improving their whole range of saws and so I am sure they will make improvements on the next version.
Thanks for the comment ;-)
Good review I was thinking of buying the evolution cross mitre saw but I think I will look into buying this saw what's the max width this saw can cut 3 quarter ply wood please
650mm
Hi mate, my blade is not parallel to the t tracks, and i don't know how to adjust the table top. can you please advise
It's not something that I have had to adjust on mine, sorry.
It might be worth asking them, as they must have had this problem before- evolutionpowertools.com/uk/contact/
Thanks for the comment 👍
great video ..can you tell me the max on the cross cut thanks and keep up the great work
It will cut 83 mm at 90 degrees or 58 mm at 45 degrees
Thanks for the comment 👍
I noticed on your video and others that whilst doing a rip cut the wood tends to move about at the end its been cut. How can you prevent this or does it not actually affect the cut? Thanks
I don't think it affects the cut 🤔
Thanks for the interesting review. I want to buy such a saw. Can you tell the exact weight of the saw in the factory packaging for sending by mail? Thank you.
You are welcome.
The package size is 920mm X 760mm X 370mm and the weight is 33.6KG.
Thanks for the comment
I'm a little late to comment on this video but I haven't seen it before. I'm thinking of a new saw and this is close to my needs and pockets.
I was impressed with the detail you put into the video but right at the end when you were cutting multiple layers the blade had a massive wobble.
Was I seeing things? It looked like the blade was about to come adrift.
I think that blade was warped, if I remember rightly, I bought it from ebay and was bought for cutting acrylic.
You could not really see the wobble until you got the footage on the computer.
If you live anywhere near Darwen, Lancs you are welcome to come and have a go on the saw before you buy one.
Thanks for the comment 👍
Can i use with a longer bolt in saw blade to use an dado stack want to know if this is safe to use.
No, I would not recommend doing that.
I have a vague recollection of someone saying that they are illegal in the UK (I could be wrong though)
On the track where the fence connects with the number marking is that loose. On mine it is loose on the left end where the table pulls out and extends.
No, I don't think mine is loose. If I remember rightly, you have to install that piece yourself?
Thanks for the comment 👍
Not too sure about the RIP plate fence. Is it intended for all fence cutting? It seems to have far too short of a bearing face to stabilise long cuts ! Anyway, thank you once again for all your skill in presenting this video, and for all the time and trouble you take. Confession ! I have recently purchased one of these units, and admittedly you have to be prepared to put a few hours into building the stand. But the final product is great. It presently resides in the front room due to my workshop being full of wood, will soon sort ! Because of its present location the Wife is not very happy at me cutting any wood at all in the front room.....strictly prohibited. Although I did wonder about always having to use the rip plate fence all the time, look forward to your comments, assuming that I have not been put down by the Wife ! Thanks once again.
The rip fence is designed so that it guides the material to the blade, but does not go past the blade as that could potentially cause a jamming point and kick-back, I think.
It's a great machine for the money, I love using it ;-)
Thanks for the comment
Yes that's what I would assume, but nothing by way of explanation from Evolution.
I noticed you had took the safety plate of the stop button
It looks like a nice piece of midrange kit but does it lack a bit of oomph?
It has cut everything I have ever tried to cut 👍
Does the fence fit on the left-hand side of the blade?
How well does it rip through 3" by 3", you seem to be cutting through the 3"by 2" fairly slowly. If ripping 4" timber can you saw through from one side and complete the cut by inverting it?
It seems to be a better saw than the Fury.
Thanks again for an excellent review.
I think you can put the fence on either side but can’t remember 100%
I always cut slowly on a table saw as I don’t use one regularly enough to go fast lol.
Yes you should be able to cut one cut then flip it over ( I do this a lot on the sliding mitre saw )
Yes, it is much better than the fury.
Ultimate Handyman: Thanks for the reply
You are welcome.
I replied to your first comment using my phone in Egypt and have only just been able to see your second reply.
Thanks for the comments
Could i cut a piece of 6 ft scaffold board length ways ? Looks like the guard would be in the way.
Sure, you can just increase the height of the blade and the guard will rise with it 👍
I notice that when you're ripping, you're pushing the wood slower than I would normally. Is that for demonstration purposes, or are you finding resistance from the motor or the blade when you feed the wood?
I don't do a lot of ripping, so I tend to take my time with it.
I'm not sure how this compares to other bench saws as It's a long time since I used one.
If you live anywhere near Darwen, Lancs you are welcome to come and have a go with it?
Thanks for the offer. Unfortunately I'm across the channel. ;)
I’m finally getting a table saw this weekend 😎
Which would you recommend out of the....
Evolution Rage5S
and the...
Bosch GTS10J
I've not tried the Bosch, but if you want to cut wood and metal you can only really go for the Evolution.
I'm sure the Bosch is a great saw for cutting timber though ;-)
Is there any play in the fence? and how square do your rip cuts finish up?
Once the fence is locked in position there is no play in it. I've rip cut some pieces that were about 3 metres long as the cuts were perfectly square.
Thanks for the comment 👍
Hi, Is there any way that you can make a comparison between Evolution and draper table saw, and why they are inexpensive compare to DeWalt . thanks
Dewalt is a very good make, but very expensive.
Evolution make some great tools that can cut metal and wood with the same blade, which are often much better value for money.
I'm not sure about Draper power tools, I have used some of their hand tools and used to buy a lot of them when I was a teenager for working on my car. I still would not hesitate to buy any hand tool that was made by Draper.
I'm afraid I cannot compare the Evolution to the Draper as it would mean me purchasing the Draper model and I don't have the space for it, nor the time to make the video.
Thanks for the comment
thanks
This is a very good review with plenty of details and practical/visual demonstration.
Just a couple of things that I hope someone can answer.....
1. Is the table saw sturdy, particularly when ripping long timber posts. This means plenty of side force on the legs.
2. Is there plenty of power in the motor to easily cut materials at/close to the max height?
I'm afraid I can't answer either of those questions, hopefully someone else will.
I normally only cut wood up to 1 inch thick, and it does a great job of that.
Thanks for the comment ;-)
Flashing the Perspex to show how wealthy he is.... :D
Great video. Thanks
I think Timber is expensive now, there are a lot of memes on Twitter of people saying a millionaire just passed me on the road, then show a trailer full of timber 😂
Thanks for the comment 👍
@@ultimatehandyman It is getting worse. And then you see our American cousins showing an example of something on a "scrap of walnut" or some other piece of beautiful wood. The prices of hardwoods here are steep.
How have you got on with the non evolution blade. They have made it difficult to use third party blades by their dimensions probably to force people to buy their expensive blades.
Thanks
James
I've only used it a couple of times, I've been that busy that I don't get time to make much these days.
If they wanted to be awkward they could use a small diameter spindle and small bore blades, but they use a large diameter spindle and blade, which means that most other blades will fit this machine, if you use a reduction ring.
Thanks for the comment
@@ultimatehandyman Thanks for the response. You also have to consider the width of the blade to riving knife and kerf.
Thanks
James
Screwfix are now selling the Evolution R255PTS 255mm. Is that an upgraded model to this?
Not sure, Evolution seem to make slightly different models specifically for Screwfix, perhaps they are forced to change the model slightly to fit the price that Screwfix want to sell it for (I'm only guessing)
Thanks for the comment 👍
This video is a few years old now, but can you say what happened with the blade wobble at the last shut down? The blade didn't look like it was on the mandrel properly
It was a blade that I bought from eBay, I could not see the wobble until I watched the footage back. Once I removed the blade it was obvious that it was warped. I have since bought another blade, but this time I bought a Trend version, which is great.
Thanks for the comment 👍
hi great video really good i know you dint design the saw But just wondering why has it got that bit of metal on the fence why cant you just but up to the long fence? & why has it got that grove along the top thanks
I'm not sure why they designed it like that 🤔
It's a safety feature that reduces the chance of kickback by basically have no fence touching the work piece after it passed the blade, but still allows the main fence to be attached at the front and back on the table.
Since you have this one and the fury one is there a major difference between the 2 or ? if you was to go out and buy one what would you go for ?
Yes, there is a major difference between the two machines.
I'd definitely get the Rage 5 over the Fury 5 as it's a much better saw, which is why it is more expensive.
I love the Rage 5, it's a superb machine!
Ultimate Handyman cheers for the fast reply imo looking at both reviews the sliding sled seems beast thanks again for your review spending the extra 80 quid for rage deffo makes sense then thanks for doing the videos
You are welcome.
The sliding sled is a great idea, plus the fact that it can be folded down and wheeled anywhere makes it much better than the Fury.
Thanks for the comments ;-)
Ultimate Handyman pleasure all mine follow all your reviews and helped me tons and yeah folding down is huge us for me as being in a shed thanks again
I noticed the blade wobble as it slowed down, is that right?
Well spotted. It was a faulty blade, which I bought from eBay. You could not see it in real life, but it is clear to see in the video. The blade has since been replaced 👍
I don't understand why the rip fence has the extra metal piece to the left of it? Could you explain the function? Thanks,
I too would like to know the purpose of this.
I believe it's to reduce the chance of kickback if the rail isn't absolutely parallel to the blade. By having no fence after the cut the workpiece is less likely to pinch between the fence and the blade, because there's no fence there to pinch with.
I've not bought this yet but am considering it. I think this way you get the safety of a shorter fence with the sturdiness of a full fence supported each end behind it.
I have this saw and never use that secondary short fence,it defeats the point of the superb main fence
Sorry if you've answered this before but it seems odd to have a full length rip fence and then rip against a short bolt-on one. Surely a professional saw - which this seems marketed as- would use the full length fence? Am I missing something? Great videos by the way!
I'm not sure why they designed the fence that way, there must be some reason for it!
Thanks for the comment
It is to prevent the workpiece from binding between the blade and long fence as it moves past the blade. The shorter fence keeps it parallel through the cut and the released i.e cut portion, has room to move withouut binding in the space between the shorter fence and full length fence.
Very good review, the buckled blade is not good and the guard is a niggle to solve. I hope the blades are not all like that.
Thanks
James
The buckled blade was one that I bought from eBay specifically for cutting acrylic. The evolution blades have always been fine ;-)
I've since purchased a Trend blade for cutting acrylic- which should be much better.
Thanks for the comment
Ultimate Handyman. I have an evolution mitre saw and it's great for general work and as I have plenty of second hand wood with all too many embedded nails it's ideal. I wanted s saw to rip through the timber too and this blade should fit my table saw just fine, if not, I guess I will have to get the saw too.
Thanks for the reply.
.
I've been disappointed with other evolution products, their accuracy has been poor to say the least, how have you found it after 3 years of use,? E.g. It's it easy to adjust the fence by a fraction of a mm? And is the fence reliably 90 degrees? I noticed your washer trick which suggests the fence doesn't sit perpendicular to the bed when locked down, any comments on this?
I don't use it regularly, and don't cut anything that needs a great degree of accuracy.
Most of the time I use it for ripping deck boards/skirting boards etc.
Great video very informative. Can I use a Dado saw to cut rebates on this machine?
Thanks.
No, if I remember rightly you can fit a dado blade to this machine.
Thanks for the comment
I take it that the accuracy and repeatability are good on this?
Thanks for your time and effort to review this for the likes of me.
Yes, this is a great machine ;-)
Thanks for the comment
That's what I'm thinking about- the accuracy. I'm really interested but I need to figure out if I'll use it enough to drop 250 on it which is a lot to me at the moment.
Can this tabke saw use dado blades ? If yes what size? thanks
No, I don't think it can.
Thanks for the comment
Like Kev Carguillo below. The Blade wobble at the end of the video. I must admit was a big concern to me. Was it a loose blade or was it something more significant???.
I have seen the reply you gave to Kev Carguillo. Wouldn't Evolution replace the Blade??
The blade with the wobble was not the Evolution blade, it was one that I bought from a seller on eBay to cut the acrylic.
Having checked the blade it is warped and so will not be used in future. I have since purchased a Trend blade with a similar amount of teeth for cutting acrylic.
I'll check my reply to Kev as I'm not sure if I told him the blade was warped as I get hundreds of comments per week.
Thanks for the comment
Many Thanks. I must admit iv been looking at The Evolution Rage 5-S table saw with a midrange price for some time now. I think it will be ideal for my little workshop.
I like using mine, it is really useful for cutting things that can't be cut on the mitre saw.
Thanks for the comment
Hello, may I ask what saw blade is that?
It is the standard Evolution blade that was cutting the wood and metal, but I swapped to a special blade for the acrylic cutting.
fave.co/2TlyUUz
Thanks for the comment
If you just to use a wood blade is this possible to buy??
Yes, you can but a wood blade for it, just ensure you get the correct diameter blade an the correct bore.
Thanks for the comment 👍
I want a table saw for cutting recycled wood into strips for trellises.Is it worth spending £250 on this or will a cheaper model suffice?
You should be able to do that with a cheaper saw to be honest.
@@ultimatehandyman What model do you suggest? I don't want to be a 'One trick Pony'!!
@@TheEssexSpurs Perhaps something like this- www.machinemart.co.uk/p/clarke-cts16-250mm-table-saw-with-stand-230v/
Well finally took the plunge and will get a second hand version of this tomorrow.The reviews and price £175 nearly new turned my head..Am excited but scared at same time.
Without a soft start is it likely switch on the consumer board to trip
Thanks for the comment 👍
Don't understand why you are trying to slide the plywood in with the blade set too low, that's why it is hitting the guard.
The guard is there to protect you and help with dist removal, the lower it is the better.
Thanks for the comment 👍
@@ultimatehandyman Yes i know it is but you have to set the hight of the back of it so your work will pass under it.
Te da miedo la sierra o es la primera vez que la usas-
WOW! WHAT THAT SAW WOBBELING!!!!!!!!???? 25:42 Can you explain that? Honestly I'm shocked!
Btw. what about the accuracy when cutting longer pieces? What is the width on beginning and at the end of the piece? How big will be the divergency?
That's what would be interesting to proof whether this saw is suitable for more precise projects.... But this wobbeling hurts me a lot. Is that because of the blade or is the saw which causes the wobbling? Have you check it out?
Yes, that is the blade that I bought from ebay, it is buckled. I have since ordered a new one.
I have not cut any long lengths as I am restricted by the size of my garage, sorry.
Ahh Ok, Thanks for your fast response. However a piece of about 1meter is even in small garage possible.
You should try it out. Btw. I have looked for many saws and until now no other could match the Evolution. It seems it is a pretty nice saw. However, my recommendation in gernerally is to spend more money for a good blade. Because at the end the quality of the cut makes finally the result. I have using a very expensive one from BOSCH and I can tell you THERE is a huge difference.
I ordered this saw in April and got delivery last week. Only problem - the blade keeps going out of square. I have to really force the hand crank to get it square and then after just one cut it's about 1.5 degrees off. Has anyone had this problem or does anyone have a solution?
I've not had that problem. It might be worthwhile asking their support department, as it could be a problem that they have encountered before.
@@ultimatehandyman Yeah, thanks. I was planning to give them a call tomorrow. I'll post what they say just in case someone else has this problem in the future.
@@mjribes What did they say?
is fantastic machine the only think is to big need to have a space for it not idol for diy enjoy the video.
Yes, the only problem with table saws is that you need a large space to use them effectively.
Thanks for the comment ;-)
25.4mm ? not 30mm? or are you talking about the blade kerf? and not the bore?...I think I will just go with bosch or something...thanks for the video.
The Evolution blades are normally 1" bore or 25.4mm
Thanks for the comment
Handyman could you cut a full sheet of plywood on this?
You could, but you would need several supports/stands. Most saws like this would also need supports/stands. I have cut full sheets on it, but it is not easy.
Thanks for the comment ;-)
I find the evolution blade cuts metal very well and cross cutting is reasonable but for ripping it is very slow, the blade has far too many teeth for clearance. I was contemplating buying a blade for ripping but I am not sure how safe the reducing rings are for a blade with a 30mm bore to to a saw for 25.4mm bore blade. I know evolution do not sanction any blades other than evolution blades but that is probably evolution looking after evolution.
I've used a reducing ring for the acrylic cutting blade that I use on this saw, it works fine.
The flange that holds the blade on is quite large if I remember rightly so a 30mm bore blade should not be a problem.
Thanks for the comment