What can I say? You can expect something extraordinary from a man who can push screws into wood with his bare fingers (10:13)! Very good extensions; very well implemented!
Absolute amazing these extensions, the acrylic ones cost a little fortune but it's worth it. A little hint, NEVER wear gloves when handling with rotating machines, I saw guys loosing their fingers while drilling with gloves! Greetings from Germany!
For the indeed table you should also do the air assist with a foot pedal so as you get closer to the table you can keep both hands on the piece and lower the indeed so you can get close to the table at the end to push it thru. May not be a problem but for shorter people it may put me personally further and not close enough to the table and hey it’ll be cool so why not lol. Your ideas are amazing btw.
I think your perspective is valuable. I think it would have been nice to have made it that way. I made it as big as my arms could reach, but it's a shame I couldn't think of that idea. Thank you for your kind words!
@@Kynosys_ thank you so much . as is, i think everything you have done is top notch. amazing work. i wish i could do the same to my table. looks so so cool.
모아서보니까 한 편의 영화같네요. 편집기술이 나날이 발전하시는것같습니다.ㅎㅎ 늘 드리는 말씀이지만 또 배워갑니다. 아크릴의 다양한 쓰임새와 응용은 다시봐도 감탄이 나오네요. 추석 연휴라 쉬고계실텐데 알림이 울려서 방해가되는지 모르겠습니다만 남은 연휴 잘 보내시기를 바랍니다.
연휴가 길어서 예전 영상을 모아봤습니다. 이제 요령이 생겨서, 짜깁기로도 한편이 만들어지네요. 그나마 만들어 놓은 작품들이 있어서 가능한 일인거 처럼, yg 님의 칭찬의 글도 하도 많아서 언제 모음집을 한번 만들어얄까 봅니다^^ 풍성한 한가위처럼, 하시는 일 늘 번창하시기 바랍니다! 감사합니다.
Question about the overhead dust extraction. After using this, do you think it is a bit oversized? I was wondering if a more compact version, particularly in width might provide more suction?
I think your perspective is valuable. That's an accurate point. When I made it in an overhead format, I thought it would be sufficient to use enough dust collectors, and I thought I made it a bit grandiose. I think it would have been nice to make it lighter with a more flexible material. At the time, I was into acrylic material, and as I made it, it grew bigger and bigger. The performance of the dust collector is strong, so there is no major problem with dust collection. Thank you for your kind words.
Channel needs far more subscribers. Hit that like button people.
If for the filming and editing alone.
Thank you for your words of support, I will work harder to create great works. thank you!
What can I say? You can expect something extraordinary from a man who can push screws into wood with his bare fingers (10:13)! Very good extensions; very well implemented!
Kynosis - mad scientist of the maker space
@@michaelgrova225 This is the most unusual expression I've ever heard. It's fun. I will take this as a compliment and work harder. thank you!
Absolute amazing these extensions, the acrylic ones cost a little fortune but it's worth it. A little hint, NEVER wear gloves when handling with rotating machines, I saw guys loosing their fingers while drilling with gloves! Greetings from Germany!
Although I know it well, I sometimes wear it when my fingers are in pain. Still, I will always be careful about safety. Thank you for your kind words.
I built a acrylic router table top, that looks pretty cool. love the sled.
I also want to try making a router table out of acrylic. thank you!
That acrylic sleed is the best
Thanks for your praise!!!
For the indeed table you should also do the air assist with a foot pedal so as you get closer to the table you can keep both hands on the piece and lower the indeed so you can get close to the table at the end to push it thru. May not be a problem but for shorter people it may put me personally further and not close enough to the table and hey it’ll be cool so why not lol. Your ideas are amazing btw.
I think your perspective is valuable. I think it would have been nice to have made it that way. I made it as big as my arms could reach, but it's a shame I couldn't think of that idea. Thank you for your kind words!
@@Kynosys_ thank you so much . as is, i think everything you have done is top notch. amazing work. i wish i could do the same to my table. looks so so cool.
Absolutely fascinating stuff here- so glad I found this!!
Thank you for your kind words. I will try my best to make more helpful videos.
모아서보니까 한 편의 영화같네요.
편집기술이 나날이 발전하시는것같습니다.ㅎㅎ
늘 드리는 말씀이지만 또 배워갑니다.
아크릴의 다양한 쓰임새와 응용은 다시봐도 감탄이 나오네요.
추석 연휴라 쉬고계실텐데 알림이 울려서 방해가되는지 모르겠습니다만 남은 연휴 잘 보내시기를 바랍니다.
연휴가 길어서 예전 영상을 모아봤습니다.
이제 요령이 생겨서, 짜깁기로도 한편이 만들어지네요.
그나마 만들어 놓은 작품들이 있어서 가능한 일인거 처럼, yg 님의 칭찬의 글도 하도 많아서
언제 모음집을 한번 만들어얄까 봅니다^^
풍성한 한가위처럼, 하시는 일 늘 번창하시기 바랍니다! 감사합니다.
All ze toolz and knowlege you have 😮😮😮
Cool 👍 Always Success Bro 💪🙂
Impressive ❤
Thanks for your praise!!!
Just, wow
Thanks for your interest!!!
Question about the overhead dust extraction. After using this, do you think it is a bit oversized?
I was wondering if a more compact version, particularly in width might provide more suction?
I think your perspective is valuable. That's an accurate point. When I made it in an overhead format, I thought it would be sufficient to use enough dust collectors, and I thought I made it a bit grandiose. I think it would have been nice to make it lighter with a more flexible material. At the time, I was into acrylic material, and as I made it, it grew bigger and bigger. The performance of the dust collector is strong, so there is no major problem with dust collection. Thank you for your kind words.
Awesome! Do you have a link for the supplies that you used, especially the acrylic sheets and the roller hardware please?
Concerning the carriage. It not updating, and a perversion with gimmoroy. It was necessary only to stick a fringe and lace.
There are no LED lamps, and the screws are not painted in the color of the rainbow!
Thanks for your interest!
What are those two screw jack lifts being used at the drill press? Thank you
This product can be found by searching for lift table online. It is useful in many ways.
Una maravilla !!
Thanks a lot!!!
Смотрится красиво.Но всё это быстро забьется пылью .
Anyway, thanks!
@@Wielebny33 Thank you for your interest. You make a lot of great work. I will subscribe and watch your videos a lot.
There are no LED lamps, and the screws are not painted in the color of the rainbow!
That's a good method too. thank you!