Lowering the Height of Cut on a LUBA Robotic Lawn Mower
HTML-код
- Опубликовано: 9 сен 2023
- I have made a height of cut kit for my LUBA AWD 5000 Robotic Lawn Mower from Mammotion. This kit will also work with the 1000 and 3000 series of robotic lawn mowers. Find out how to get your own and how to install
Get the HOC Kit: linktr.ee/reellowdad
Need One Printed? forms.gle/VbrjuXyYjj7LhcWb8
** The Screws are M4 **
#roboticlawnmower #Luba #reellow
Interested in the Luba? You can pick up one for yourself on Amazon.
LUBA AWD 5000 amzn.to/3Qb67SZ
Replacement Blades amzn.to/3Qb67SZ
Protect Your Identity with Aura aura.com/reellow
*I will receive a commision when you sign up fo service*
SUPPORT THE CHANNEL
linktr.ee/reellowdad
BECOME A MEMBER
/ @reellowdad
DISCLAIMER
Links listed may be affiliate links in which I will receive a small commission should you chose to use them. As an Amazon Associate I earn from qualifying purchases. Thank you for your support. Хобби
Interested go check out linktr.ee/reellowdad to get the STL files or use the link to the Google Forms to have me print them.
I'm going to test your STL file in ABS on the LUBA 2.
Been looking forward to this! Hope it pushes Mammotion to release a licensed version too for those of us paranoid about warranty! Everybody wins.
The good news is I have not had any issues that has caused damage. I have to state that to protect myself.
First Aussie 😁. You’re a good Luba Tool human servant. 🤠
With the 10mm spacer, I hearing some vibration with a humming noise...I will check to make sure the screws are fully tightened. The cut down to. 1" is beautiful and i actually ran this at the slowest pace and had a larger overlap since this cuts down on motor load.
So yours is the low version and not the H version?
any tips on getting the cost of the luba lower 😂 good video
I went with adding longer screws, deeper shoulder screws using spring washers. This lowered the cut 3mm. The hope was lower cut and less grass under the blades. It did both but motor overload was a major problem while the cut was degraded. The other negative was the 8 bolts and plastic spring washers were like $41 dollars! Do you have a source and price for the bolts? I am back to the stock Luba but following your method with hope and interest.
I bought a big metric screw kit off of Amazon for other projects. The bolt heads are different but still work. I think it was around $25 for a lot of bolts. Here is an assorted M3 kit for $10 amzn.to/3ExGDYH
Can you just ship the fixing's as I can't find the google form to complete?.
I can’t get the link to work. Could I Venmo you the money to get one?
Just FYI, not sure if it is me or the model - M3 are too narrow in diameter. It appears mine are M4 from the eyeball test. Going to Lowe’s tomorrow to get M4 18mm (can’t find 17mm) to see if this is correct.
Update: definitely M4. I used 20mm in length and everything is working perfect. You could probably lower a total of 12mm total without serious modification.
@@danhill7 For the 10mm spacer, the M4/20mm screw works perfectly.
So 17mm M3 screws?
Yep.
Anyone know if this works on Luba 2 model 5000?
They are compatible
Great work!!! I filled out the google form…what now?
Do you post to NZ?