Really? Removing oxidation and dissasembling then reassembling a rotor is such an incredible skill to you? I am 100% sure you aren't in the trade if you think that
@@dimitrijekrstic7567 parts changers do not even think of fixing the problem, just the revenue from replacing it again all too soon because it was poorly manufactured as a defective replacement. A craftsman has pride goes beyond dumbass statements that they are not better trained than a parts changer. Unless the parts come from China or Mexico.
These are usually car or truck starter motors, Therefore, it requires a high electrical current to turn it on, and also provides great power and torque.
Absolutely correct! Unfortunately Financially strong currency countries are laziest yet intellegent by working on frame work made my the developing countries courtesy. Shame on those concurrently fake currencies .
да он её там зажал застучал несколько раз, полюбому медные запчасти у него были новые, просто засратые, чтобы их электричеством почистить и тд, на них ни одной выщербленки не видно
@@juanasanelli6831 te dijeron cómo hacerlo, porque no sabías ni para que era cada parte, o los cálculos si eras un niño.... Lo hiciste en un taller que se dedicaba a eso...
Si alli con los Hermanos Robaina aprendi hacerlo y como tomar nota de los pasos del bobinado antes de desarmarlo. Despues es todo practica . No tienes que calcular nada Ya esta .@@cronchynarvachki9882
They're repairing everything and that what i likes about them . The skills of repair job is dying in many countries but in Pakistan they are reparing anything which amazes me but i don't like retrading of tyres.
the engine shaft is tempered, it becomes solid. after an open fire, it becomes soft. you can see for yourself at home by heating the blade of a built-in knife on fire (be careful, you may get burned and will remain without a blade ;))
For those who say they are Pakistani; they are not actually. They became Muslim after barbaric invasions. All ancestors are 99.99 percent Hindus of native Indian Sindhu-Dravidian Harappan origins. Roots DNA trace to Africa, for all Indians of Akhand Bharat.
These Pakistani guys are in a league of their own...
🎉Orang-orang Pakistan memang pintar dan kreatif... 🇵🇰🇮🇩
P
@@zauji9066😊❤
😂 sempre tem que ter um, eu amo essa geração😂
In and on are different words with different meanings.
Given enough time and a place to work these guys could probably make an aircraft carrier from scratch.
Nah.....they are satisfied with their armature
@@diwakarprakash1688
They could get a lucrative government contract.
اذا كانت لهم امكانيه يفعلو ماء يشائون عند ذأ
Thats how building stuff works..
@@diwakarprakash1688
That armature looked like the type they use in an aircraft carrier
Thanks for showing this as a Electrical engineering student we don't know previously in practical.
This is the skills of a craftsman, not a parts changer.
Really? Removing oxidation and dissasembling then reassembling a rotor is such an incredible skill to you? I am 100% sure you aren't in the trade if you think that
@@dimitrijekrstic7567 parts changers do not even think of fixing the problem, just the revenue from replacing it again all too soon because it was poorly manufactured as a defective replacement. A craftsman has pride goes beyond dumbass statements that they are not better trained than a parts changer. Unless the parts come from China or Mexico.
@@kitmouser a craftsman cost more.
As someone that loves assembly..... Part changing.
@@kitmouserthem what the point of fixing it to deal with it again? It will be a waste the first time
Good work. Very clever.
I had never seen a motor with copper rods instead of wires. Wow.
Glad you liked it
These are usually car or truck starter motors, Therefore, it requires a high electrical current to turn it on, and also provides great power and torque.
They are used for high current devices
Embobinado de barra
This is called armature. Parts of DC motor or Self motor for heavy vehicles armature.
It Always blows my mind that people invented these things 😅
Only 1% people are responsible for all of humanity's achievements.
Rest are busy making friends, girlfriends, doing parties and playing games.
Actually it's more like 0.001%
Отлично отреставрированный якорь двигателя. 👍
Сразу видно работу мастера!
Ona motor armatürü değil rotor derler. Elektrik motoru 2 parçadan oluşur rotor ve stator rotor dönen parçadır stator motordaki sargıdır
These types of hardworking person sre common in India, Bangladesh, pakistan and Nepal
Absolutely correct! Unfortunately Financially strong currency countries are laziest yet intellegent by working on frame work made my the developing countries courtesy. Shame on those concurrently fake currencies .
Nothing amateur in this.... this is professional .
Much respect from Nigeria
Медный купорос не являеться изолятором, и вместе соприкосновения обмоток будет межвитковое замыкание, вероятнее всего
Thats nifty! I balance these at work and have always wondered how they're made.
This is just amazing man. Us Americans are so used to throwing shit out, we couldn't imagine rebuilding motors like this. Props
Вот молодец же! Прям приятно смотреть
Рад, что вам это нравится. Оставайся на связи.
Super idea 💡
Last few weeks, saw old grandpa taught his very young boy to do this, only accurate copper parts, he must do it by himself.
ประเทษที่จะไม่อดตายคือประเทศนี้ เก่งเหลือเกิน
In most countries the rewinding is also mechanical but we do it manually by hands❤❤
These people knows how to survive by fixing instead of replacing.
What in USA is garbage, for these people is gold
Very good, talent work.
Satisfying 😮
Awesome 🎉
Looks pretty professional to me
Loved it
Super 👌👌👌
One of the coolest looking designs
Awesome 🎉🎉
Thanks 🤗
AWESOME. REAL PROFESSIONAL. 😊
Wow an awesome job..
Красивая работа
素晴らしい仕上げと仕事
Now that's a master of his craft!
good work skilled
Те самые ДПТ которые я изучал на парах электрооборудования👍
Professional
Now it's all replaced and done.
Disassembling, repairing, and reusing is the way to make the earth last longer.
Wonderful. Very Talented persons perfectly keep it up
Right they are really hardworking too
Lovely work by my great Pakistani skilled workers. ❤❤❤❤❤❤❤❤❤❤
An excellent rewinding work shown here. Thank you.
So very good ❤
Impressive 😎👍
Thanks for the visit.
У Пакистанцев золотые руки....
That's a really complicated work and he has done it perfectly
Золотые руки👍👍👍🔥🔥
Un trabajo muy bien fino ....
Nice job! A true artisan and the hands of a master!
Он просто красавчик 👍
Awesome really a good work.
Okay this was some great skill work.
Hats off dude
Во так выглядит гарантийный ремонт двигателя 😂
Вот так выглядит новые запчасти придурь
@@sasvarда новая именно по этому старая медь выбивается . И проходит гальваническую обработку ...
Ну ну проще для нового взять свежую медь .
Do you know that many parts you buy for your car that are sold as new are rebuilt? For me they are new .
да он её там зажал застучал несколько раз, полюбому медные запчасти у него были новые, просто засратые, чтобы их электричеством почистить и тд, на них ни одной выщербленки не видно
veryyyyy gooddd!!
These guy's work is awesome brilliant and smart..🤙🏽
A definition of an Artist
Recondition very easy ❤
Made in PAKISTAN ❤❤❤. Good work from Germany 🇩🇪.
ellos son buenos restauradores, llevan cómida a su mesa ❤
На более старых образцах используется горячая спайка контактов.
Excelente trabajo , no cualquiera lo hace tan bien
Lo hice de niño
@@juanasanelli6831 te dijeron cómo hacerlo, porque no sabías ni para que era cada parte, o los cálculos si eras un niño.... Lo hiciste en un taller que se dedicaba a eso...
Si alli con los Hermanos Robaina aprendi hacerlo y como tomar nota de los pasos del bobinado antes de desarmarlo. Despues es todo practica . No tienes que calcular nada Ya esta .@@cronchynarvachki9882
Nit and clean work complete fitting 👍 good job
அருமையான வேலைப்பாடுகள்
They're repairing everything and that what i likes about them . The skills of repair job is dying in many countries but in Pakistan they are reparing anything which amazes me but i don't like retrading of tyres.
Well done🎉
❤😊 beautiful and awesome
Thank you! 😊
That was awesome, great skill set, thanks for sharing!
These guy can literally rebuild anything. Something we don't do any more
Это всё очень профессионально👍👍👍
He really makes it look like just anyone could do it
Amazing that it doesn't cause a short circuit..This copper is unvarnished...
Después de mete dentro de un tarro con barniz aislante caliente se deja secar y queda en servicio por años
@@juanasanelli6831 Gracias por la información 👍👍
Everyone desperate to pick holes in his technique
You really think he would be this good at it if the didnt work? Dude makes a living doing this
It looks like the shape of it means it's not touching anywhere. There's paper insulator in the core too.
@@rambo-cambo3581wich means nothing in some parts of the world
It's so neat for a hand made repairing process
Good job!
Thank you! Cheers!
Skilled work
Кропотливая работа
Esses trabalho manual é genial melhor que as máquinas
Unbelievable. Hand made.
Talented
Great work keep it up
А потом покупая такое: что-то долго не проработало...😢
Süper Süper harika ❤❤❤❤
Nice work❤
Satisfying video
Glad you enjoyed.
Neet work ❤🎉
good job
Nice ❤
Wow
Perfect ,!!!
Muy bueno 😺
Dope af
Bravo Bravo Bravo 👏👏👏👍👍👍👍👏👏👏👏👍
Дай бог тебе здоровья
تبارك الله على هذا العمل المذهل
thats not wire, thats a Rod.!
the torque is must be great ❤
the engine shaft is tempered, it becomes solid. after an open fire, it becomes soft. you can see for yourself at home by heating the blade of a built-in knife on fire (be careful, you may get burned and will remain without a blade ;))
Orang asia Selatan sangat kreatif 👍👍👍👍👍
Yeah especially with misinformation. They need to get off of our RUclips servers
Nice job
Anh ta rất tuyệt 😊
For those who say they are Pakistani; they are not actually. They became Muslim after barbaric invasions. All ancestors are 99.99 percent Hindus of native Indian Sindhu-Dravidian Harappan origins.
Roots DNA trace to Africa, for all Indians of Akhand Bharat.
The true definition of “I am the warranty”
Pakistan is full of talent.. . It just need needs a spotlight and support❤
What did I just watch, it’s 2 am and this showed up in my recommended
Perfect 👌
Thanks 😄
Офигеть... Технологии на коленке