While I agree with most of the people commenting about the naked wire, but i loved the video. This was great video other than the wire. I have a similar wall but in my case, i would like the TV on top. I would have also loved if you would have talked about the heating, as far as how much opening it needs and/or on top as most people would want to hang TVs on top. Thank you though for the video
Sorry to be negative here, but it's one thing to hang the fireplace surface mount. But, if you're going to go to the trouble of cutting studs etc, my gosh hard wire the friggin thing. This install is very sloppy.
EXACTLY! When I saw they were just going to plug it in and leave the cord showing I was like "why bother with the recessed mounting? It looks like crap! I'm getting ready to install one of these in our basement and you can bet your behind that I'm hard wiring that SOB!
can you let me know please the actual napoleon model fireplace this is looks great thanks. just bought a forte one today on amazon but might like this better
Nice clear video. I am going to install a recessed electric fireplace but wondering what tool(s) did you use to cut out the studs without going all the way through the rear drywall? That part of your video was on high speed. I will hardwire mine to a switch on the wall. Thats easy to do.
Thank you so much for this video!!!! I hope u can answer my question. If u in fact find that the wall is weigh bearing. Do you have to build a heading or u mean u can’t put it in the space.
so my question is do these fireplaces need fire protection behind them or any ventilation? Or can I install this on a joining wall with another room? Asuuming of course the wall is supported structurally?
Flush mount fireplaces typically have enough trim to hide the additional framing needed when cutting through studs. You should have fully framed this out. Also, the idea you need an electrician to tap a 120v outlet is hilarious.
Napolean ... he calls it @ 5:28. My guess is a 50-In Allure Wall Mount Electric Fireplace - NEFL50FH Having this said Dimplex has much more natural flames but it is pricier.
This is Trevor. He installs fireplaces for blind people. if you know anyone whos looking to get his installed, don't hesitate to contact him. hes top notch
Wow. Should have located it somewhere else. Took that diagonal 2x4 off the back of the stairway. NOTE: that's what held the stairway drywall in position. Good luck with the cracking that will happen now. The vertical ones also held drywall along the stairway up, and the stairway beneath. Somebody's gonna have a nice repair project to re-do every year as the cracks continue re-appearing!!! Gotta love it! This choice is in the category of DDIY - - Don't Do It Yourself.
Hey, the install showed how easy it can be but for self-described pros that non-finishing touch on the electrical cord is half-ass. You even could have run the cord inside the wall and just brought it through the wall at the outlet right there! As a marketing professional, I am respectively telling you're not helping yourselves with this.
Embers Fireplaces & Outdoor Living could have at the VERY least done what the poster stated. Ran the cord BEHIND the Sheetrock and then popped it out AT the outlet and THEN plugged it in. I am not some DIY, or electrical installer and would have done this for esthetic reasons. It looks sloppy. This should have be an easy decision FREE of charge.
The comments on this video are a joke. The guy FULLY SAID he is just going to plug it in, but if you WANT it hard wired then go ahead and hire an electrician. Clearly the home he is installing this in, doesnt care if the damn cord is showing. Geez ahahahahaha
@@embersliving Hey I've been researching a gas grill and have found all your videos very helpful. Decided to check out some of your fireplace stuff too and came across this one. Lots of hate, people sure do suck! Liked, subscribed, and will be placing an order for a Blaze LTE shortly. Thanks again!
You fast forward thru the important parts. The cord looks horrendous and I'm not so sure that those stairs didnt in part rely on those studs you removed. A proper install would be to properly foam that opening with a header and supports and to properly hardwire that fireplace to the existing circuit.
Next time, please use a microphone. One can hardly hear you and it always is annoying to hear someone speaking off-mike. Also don't fastforward the demonstration of the installation. It's much better to explain what the workers are doing at a normal pace.
@@embersliving You know....how when you leave the electric fireplace on for hours and hours the heat builds up behind and below the units and caused the wood in the wall to catch fire. Once you get the fire and the house goes up in flames...everyone dies. What is even worse, is the insurance company refuses to pay because it was a faulty install ...based on some diy moron video.
The homeowner's should have spend the money and had an electrician wire the power cord correctly. Anywhooo thank you for the electric fireplace install video.
I’ve wanted to do this project for the longest time. I called a contractor and he told me 4000 for the job lol I don’t think he understood what I meant by fireplace. I said wall mounted, and I think he thought I meant a real fireplace 😂😂 unless that’s how much it costs to install?
Trevor thanks so much for this video, i used this to get going when i building out my recessed fireplace - here is my video ruclips.net/video/4ZDg4wYAaCw/видео.html . Have you ever done a custom ducting over a non recessed fireplace though?
its just one way of doing it, to show customers how easy it can be. Hardwiring is a great option as well! However this customer didn't want to pay an electrician and this was the option he chose.
@@embersliving Come on you guys should be able to do the whole install without asking the customer to go to the trouble of hiring out yet another person. Especially for something so simple! If I were you I wouldn't even feel comfortable letting a customer install it the way you guys demonstrated...it completely ruins the finished product! When people go to their house and look at that and see how sloppy it is they aren't going to be impressed. Nor will they think dropping $1K+ on an electric fireplace seem like a good idea when they think it'll just end up looking like that. I'm not trying to tell you how to run your business....well actually I guess I am...DO THE INSTALL RIGHT DANG IT!!!!
Sloppy job. If it's a load bearing wall, the cutout studs (you've cut TWO) needs to be supported by a horizontal stud. Place the damn cable inside the wall.
Man dude stop! That installation is ugly as hell. You’re legit standing in front of the plug in and the wires look like a snake under the unit!!! Who in their right mind would settle for this?!.
You couldn't tighten the cord so it's not slacking across the entire fireplace? There's enough room behind the glass to hide the cord completely.
But the cord - NOOOO!!! Lol hide that freaking cord omg!!!
jessica lamarre he is that’s why he’s standing there lol 😂
🤣🤣
Lmao thats the first thing I thought also
Exactly, they could’ve put the outlet on the other side of the wall.
i like how he's standing in front of where the cable is going down to the outlet so he can hide it and not show how ugly it is.
exactly
That's exactly what a said lol
I was thinking the same.
You can still see the shoddy untidy cabling underneath the fireplace though lol
While I agree with most of the people commenting about the naked wire, but i loved the video. This was great video other than the wire. I have a similar wall but in my case, i would like the TV on top. I would have also loved if you would have talked about the heating, as far as how much opening it needs and/or on top as most people would want to hang TVs on top. Thank you though for the video
Sorry to be negative here, but it's one thing to hang the fireplace surface mount. But, if you're going to go to the trouble of cutting studs etc, my gosh hard wire the friggin thing. This install is very sloppy.
I must say that It is a good idea for a how to video but I agree with you that the install itself is a bit sloppy...
EXACTLY! When I saw they were just going to plug it in and leave the cord showing I was like "why bother with the recessed mounting? It looks like crap! I'm getting ready to install one of these in our basement and you can bet your behind that I'm hard wiring that SOB!
I think the owner just didn't want to pay the extra for the electrician or Trevor wasn't certified.
Would have been an incredibly easy diy hardwire with an outlet so close.
@@InvestorTheory Maybe, but then don't do a video showing this slop.
Thank you..! I'm about to install one and your video helped me a lot and I will hard wire the switch myself
So is it just a monitor or does it produce heat?
2x4 wall...? was it a 110v unit also.?
Possible get it more flush?
can you let me know please the actual napoleon model fireplace this is looks great thanks. just bought a forte one today on amazon but might like this better
Dimplex ignite. Check out our top 5 2021 electrical fireplaces video its the #1 choice.
Nice clear video. I am going to install a recessed electric fireplace but wondering what tool(s) did you use to cut out the studs without going all the way through the rear drywall? That part of your video was on high speed.
I will hardwire mine to a switch on the wall. Thats easy to do.
good to know!
Believe he said they used a hand saw.
@@tomboylan82 Thanks. I’ve put two in now and handsaw is slow but it works !
Thank you so much for this video!!!!
I hope u can answer my question. If u in fact find that the wall is weigh bearing. Do you have to build a heading or u mean u can’t put it in the space.
Yes you do
What’s your name I would like to call the store. Thanks
so my question is do these fireplaces need fire protection behind them or any ventilation? Or can I install this on a joining wall with another room? Asuuming of course the wall is supported structurally?
electric units do not need them
Flush mount fireplaces typically have enough trim to hide the additional framing needed when cutting through studs. You should have fully framed this out. Also, the idea you need an electrician to tap a 120v outlet is hilarious.
Thanks for watching!
Which fireplace is that? I like the look of the flames.
Napolean ... he calls it @ 5:28.
My guess is a 50-In Allure Wall Mount Electric Fireplace - NEFL50FH
Having this said Dimplex has much more natural flames but it is pricier.
how much will these electric fireplaces warm a room? thinking of one for the basement in tri state area, so cold in winter time.
about 400 sq ft
Who i Candy Buy it..?
Wait... YOU are the professional installation? I would have called an electrician to hard wire that.
Why spend all that time to recess it if you’re just going to leave the cord exposed? 👎
This is Trevor. He installs fireplaces for blind people. if you know anyone whos looking to get his installed, don't hesitate to contact him. hes top notch
haha
Thank you for that video. Great information.
No problem!
Isn’t that wall load bearing since it’s next to the staircase and stringer?
no it wasn't
Installing ours now... how do you attach the glass on those clips on the top?
there are little hooks that they attach to
I wanted to see the actual prep work for the wall. Tools and techniques used.
true we're more of a retailer rather than installer though.
My husband used these plans from Stodoys and he is very pleased.
good to know
@@embersliving 👍👍👍
You don't need to hire an electrician to wire that. Just cut the plug and feed it through the back of that receptacle and wire up.
The white wire straps provide a nice contrast to the all black fireplace unit...D' Oh!
haha
Wow. Should have located it somewhere else. Took that diagonal 2x4 off the back of the stairway. NOTE: that's what held the stairway drywall in position. Good luck with the cracking that will happen now. The vertical ones also held drywall along the stairway up, and the stairway beneath. Somebody's gonna have a nice repair project to re-do every year as the cracks continue re-appearing!!! Gotta love it! This choice is in the category of DDIY - - Don't Do It Yourself.
ha ok
Aint no way he cut a hole in the wall then ran the cord like that 😩
so sorry
I said the same thing 😂
Is this just a display screen or for heating?
it has both
Does it need a gap between drywall? If you have the space behind can the glass basically sit tight against the wall?
no it doesnt
The work is excellent, just a detail, I think you could work a little to make an internal connection so that that electrical cord is not visible
true good feedback
is the warm fireplace safe, if it gets hot around the drywall with no type of protection?
yes, its warm but not hot
An electric fireplace? Should that be an electric fire in the fire place?
Gross install!!
Didnt show how they reinforced the stud frame which is the most important thing in the installation.
thanks for the tip
Thanks for this thorough explanation.
I can make a fire colorful like a rainbow. Are you interested?
no
The cord ruins it. Why go through the trouble and spend the money if you’re not gonna do that?
If you need more practical heaters you can choose Luxeva Carbon Heaters :)
Thanks for watching
why wouldnt you run the wire behind the wall? you already have a huge hole in it....and for that speaker to the right...
customer didnt want to spend the money
you dont need to hardwire, just install an in-wall kit to hide those wires.
good idea!
Isn’t it a fire hazard to install an electric fireplace inside a wall like that since the heat will be vented inside the wall? Just curious
I think that you are right
no all the heat comes out the front
Uhmmmm... remove the stairs support....
What if it’s plaster?
that I am not too sure on
Why you stepped right where the cord is LoL 😆 why you try to covered
haha
Hiding the cord it’s a Must
yeah
Did multitools not exist 6 years ago? They used a hand saw
Thanks for watching!
Hey, the install showed how easy it can be but for self-described pros that non-finishing touch on the electrical cord is half-ass. You even could have run the cord inside the wall and just brought it through the wall at the outlet right there! As a marketing professional, I am respectively telling you're not helping yourselves with this.
well we keep our videos very real. and this particular homeowner didn't want to pay an electrician, so we happily complied and turned the camera on.
Embers Fireplaces & Outdoor Living could have at the VERY least done what the poster stated. Ran the cord BEHIND the Sheetrock and then popped it out AT the outlet and THEN plugged it in. I am not some DIY, or electrical installer and would have done this for esthetic reasons. It looks sloppy. This should have be an easy decision FREE of charge.
That’s against electrical code,you cannot run cords inside a wall...
@@raythomas2925 I meant with conduit, of course. Sheesh.
Why does EVERY installation chicken out and just plug it into the outlet. I have not seen one that hides the outlet in the wall
just a budget thing
@@embersliving can you create or send me a link to someone who hides the outlet and cords?
❤️❤️👍👍
The comments on this video are a joke. The guy FULLY SAID he is just going to plug it in, but if you WANT it hard wired then go ahead and hire an electrician. Clearly the home he is installing this in, doesnt care if the damn cord is showing. Geez ahahahahaha
MISS Thommas appreciate the love! Exactly the homeowner didn’t want to pay an electrician... please subscribe and give thumbs up
@@embersliving Hey I've been researching a gas grill and have found all your videos very helpful. Decided to check out some of your fireplace stuff too and came across this one. Lots of hate, people sure do suck! Liked, subscribed, and will be placing an order for a Blaze LTE shortly. Thanks again!
Looks like your NBA height in this video lol. You close to 7 feet?
haha tiny basement
Neat job balls up by that poxy cable
ok
You spend $700+ on a fireplace and the cord is showing. I'm laughing my ass off.
Mark Hoffman the music is perfect for these clowns.
Beautiful job thank you
thanks for watching
I am sure you can still buy handbook with all info you need on woodprix. Just google it.
That electric work doesn't need a Pro electrician - - the power cable at the bottom edge looks horrible.
You fast forward thru the important parts. The cord looks horrendous and I'm not so sure that those stairs didnt in part rely on those studs you removed. A proper install would be to properly foam that opening with a header and supports and to properly hardwire that fireplace to the existing circuit.
thanks for the feedback
Next time, please use a microphone. One can hardly hear you and it always is annoying to hear someone speaking off-mike. Also don't fastforward the demonstration of the installation. It's much better to explain what the workers are doing at a normal pace.
but thats not flush mount? its proud of the wall.
its as tight as it will go in a 2x4 wall
It's screaming to be a foot higher!
You should do an update video about how the heat built up behind the fireplace in the wall and caused their house to burn down and kill everyone.
what
@@embersliving You know....how when you leave the electric fireplace on for hours and hours the heat builds up behind and below the units and caused the wood in the wall to catch fire. Once you get the fire and the house goes up in flames...everyone dies. What is even worse, is the insurance company refuses to pay because it was a faulty install ...based on some diy moron video.
The homeowner's should have spend the money and had an electrician wire the power cord correctly. Anywhooo thank you for the electric fireplace install video.
I agree!
lol it would have taken an extra 15mins to run the cable in to the back of that outlet
H true. Customer didnt want to pay an electrician and this was a real in home project.
The fire place looks good but the wire showing takes the good away.
ha thanks for the feedback
oh dear....
Oh yes
I check a lot of woodworking handbooks. These one from Woodprix are the best.
I’ve wanted to do this project for the longest time. I called a contractor and he told me 4000 for the job lol I don’t think he understood what I meant by fireplace. I said wall mounted, and I think he thought I meant a real fireplace 😂😂 unless that’s how much it costs to install?
yeah that seems high
Such a hack job, seriously laughed at this one. You should remove this video!
The cord , 🤦🏻♂️
TeeRexx2 ha I know. But we were in a customers house and they didn’t want to hard wire 🤷♂️
You like my new fireplace? It's electric. NO, really!
not hiding the wire doesn't look good
sorry
Either your tall or that ceiling is low
Hahahah both
Not good with the wire showing.
true
Uff that cord showing it’s a BIG NOOO
I know!
Trevor thanks so much for this video, i used this to get going when i building out my recessed fireplace - here is my video ruclips.net/video/4ZDg4wYAaCw/видео.html . Have you ever done a custom ducting over a non recessed fireplace though?
Thanks! I have not, almost all our stuff now blows out of the front of the unit
So tacky
I heard wet fart at 4:31 😅
whoops
This video taught me an important leason, hire a professional to do the install. The cord there is awful. Sorry, I hope you hid it better later.
We do always suggest hiring a professional! Thanks for watching.
go through all that and then not do the electric? goodness
haha i know
Poor job.... all around from the way it's attached to the courd to not boxing out
hah thanks for watching
If you guys are professional installers why don't hard wire, to me the word professional it's to much for you guys.
its just one way of doing it, to show customers how easy it can be. Hardwiring is a great option as well! However this customer didn't want to pay an electrician and this was the option he chose.
@@embersliving Come on you guys should be able to do the whole install without asking the customer to go to the trouble of hiring out yet another person. Especially for something so simple! If I were you I wouldn't even feel comfortable letting a customer install it the way you guys demonstrated...it completely ruins the finished product! When people go to their house and look at that and see how sloppy it is they aren't going to be impressed. Nor will they think dropping $1K+ on an electric fireplace seem like a good idea when they think it'll just end up looking like that. I'm not trying to tell you how to run your business....well actually I guess I am...DO THE INSTALL RIGHT DANG IT!!!!
Embers Fireplaces & Outdoor Living there are no excuses for this. You’ve brought shame to your company and possibly your family
sloppy job
uuuhhh, so that’s where the cord will go …..no
ha
Sloppy job. If it's a load bearing wall, the cutout studs (you've cut TWO) needs to be supported by a horizontal stud. Place the damn cable inside the wall.
ha thanks for the feedback
Guy probably made 800$ fornthat install too
Thanks for watching!
Yea definitely no on the cord that looks horrible
agree
You must be kidding. They must be out of business by now
Ha thanks for that. 10 years stronger then ever!!!
I’m sorry but why go to that length and have the power cord on the outside? Looks not so professional. Actually looks awful
customer didnt want to pay for an electrician
Good grief hid the cord!!!!
so sorry
No good
Man dude stop! That installation is ugly as hell. You’re legit standing in front of the plug in and the wires look like a snake under the unit!!! Who in their right mind would settle for this?!.
true, but this was for real in a customers home, and they didn't want to pay an electrician
They are basically trying to sell the fireplace.
Are Bhai tumhe patta bhibhai ki Jo yune bola hi uske bare bare jara socho ,Kashmir Bharat ka ek abhin hissa hi ,Jay hind
ok
Horrible. You couldn’t even hide the cord?!
homeowner didn't want to pay for an electrictian
The install looks like feces with the cord showing.
American Patriot bb
Lmaoo.
What a horrible job on that cord!
so sorry
Cord looks like garbage.
yeah but what the homeowner wanted
🙅♂️..bad install..the only thing fitting was the Benny Hill Music!
haha thanks
This is stupid, why would you spend money on a FLUSH MOUNTED FIRE and have the cord not hard wired...defeats the whole purpose 🤣👎
ha its what the customer wanted! Didn't want to pay an electrician