Been waiting for a video on the Nitro. Great job as always. I have the Bin Tac S45 with 13” barrel and twin 500cc carbon fiber bottles. Was going to order the Nitro to get the 24” barrel, but loved the other configuration. Good thing about the platform is you can swap out different barrel lengths. As far as I know, currently; the ONLY way to get the 24” is via the Nitro. How do I order one of those barrel rings?!
Hi Razor. That S45 arca barrel band and arca bottom I used in the video is the exact same one I sell on my website. Please visit www.backyardairguns.com to purchase the S45 band. Thanks for being a fan of the channel.
I have a question for you: Can you please let us know the thread size for the Muzzy brake? I want to make sure it will fit my 17.9mm barrel head on my 457 Challenger bullpup. I look forward to your answer.
I believe it is M18 x 1. I also found this on the DonnyFL website that sells the adaptor below for the BinTac S45.... AEA S45 M18x1 Extender A103 : This adapter is 2 inches long and clears the factory air tube allowing you to put a Great Kami or Emperor with M18x1 threads.
This version is regulated externally out of the box. It under this heading: B&W S45 Nitro(357,457Cal) In Stock When you put the rifle in the checkout - there is an option to select if you want the regulator or not.
I'm sure you can hunt deer with this rifle, but it is not the best rifle for hunting big game. I would deer hunt with the AEA Challenger Elite in 357, 457, or larger caliber. The Elite rifles are crazy powerful and more accurate. I have several videos on those rifles.
Leave any of those AEA guns sitting in a corner, fully charged. Come back a month later its gonna be empty! 5 different guns same problem with them all. Lets talk about the major flaw!
Why would you leave your air rifle in a corner for a month with shooting it? Seems like a big waste to me. :-) I have more AEA rifles than I have fingers on both hands, and have never had any issue with any of them holding air.
I have an sf sniper, challenger pro .30, challenger pro .25 and the challenger .30....never had them lose air over time. I had some reg. Creep in my sf but bin swapped it out and no problems after. I had an fx wildcat that would never hold any air though.
Your 232 grain slug is going to get hung up because of the deep groves on it. If you take 1 slug and try to load it by hand into the breach you will understand what causes certain slugs to jam in the S45. The barrel "rifling" causes slugs to be hard to load if they have deep groves on them that get hung up on the rifling groves...
I really appreciate that info. This is my first 457 cal. So far, I have only shot the 155g slugs. I don't see the need to shoot the very heavy slugs in a semi auto.
Love the sound that came out from the barrel 👍🏻
Thanks for your review, I can always count on your content to answer all my questions.
Thanks Brad!
Finally I’ve always wanted to see the nitro version thank you man👍🏽
Thanks Rolando. It's a really fun rifle!
Excellent. Ive been looking this in the 13 inch
Ok… that was a good and to the point review 🫡
Thanks! :-)
It is a fun rifle!
Nice!
I didnt catch what range your target was at? Any chance you'll do another video on this gun , specifically 50 and 100 yard accuracy?? Thanks...
That video I was only at 10 yards. I will do another video on this rifle at 50 and 100 yards.
Thank you !!! There's just not much info on this one on the internet. Definitely looking forward to your accuracy review!!!
Nice video thank you buddy
I may be coming to see you for this next, Bin😊
Excellent
Thank you so much 😀
Great work my man. I apologize if I missed it, but what was the regulator set at for the video?
Hi Richard. The reg is set at 200 BAR or 3000 PSI. I have never messed with it. It shoots well at that setting.
Been waiting for a video on the Nitro. Great job as always. I have the Bin Tac S45 with 13” barrel and twin 500cc carbon fiber bottles. Was going to order the Nitro to get the 24” barrel, but loved the other configuration. Good thing about the platform is you can swap out different barrel lengths. As far as I know, currently; the ONLY way to get the 24” is via the Nitro. How do I order one of those barrel rings?!
Hi Razor. That S45 arca barrel band and arca bottom I used in the video is the exact same one I sell on my website. Please visit www.backyardairguns.com to purchase the S45 band. Thanks for being a fan of the channel.
I have a question for you: Can you please let us know the thread size for the Muzzy brake? I want to make sure it will fit my 17.9mm barrel head on my 457 Challenger bullpup. I look forward to your answer.
I believe it is M18 x 1. I also found this on the DonnyFL website that sells the adaptor below for the BinTac S45....
AEA S45 M18x1 Extender A103 : This adapter is 2 inches long and clears the factory air tube allowing you to put a Great Kami or Emperor with M18x1 threads.
Question: did it came regulated out of the box? The version on BinTac website does not show it?
This version is regulated externally out of the box. It under this heading: B&W S45 Nitro(357,457Cal) In Stock
When you put the rifle in the checkout - there is an option to select if you want the regulator or not.
@@backyardairguns Thanks
How long is the barrel? What is the rifling twist? ? ? ?
The barrel in the S45 Nitro is 24 inches long. I'm not sure on the barrel twist rate, but I will try to find out. Thanks for watching.
@@backyardairguns OK, I'll wait for your reply, thank you. . You try to find
Whats nitro?
Nitro is the longer barrel S45.
Can you hunt deer with that
I'm sure you can hunt deer with this rifle, but it is not the best rifle for hunting big game. I would deer hunt with the AEA Challenger Elite in 357, 457, or larger caliber. The Elite rifles are crazy powerful and more accurate. I have several videos on those rifles.
Leave any of those AEA guns sitting in a corner, fully charged. Come back a month later its gonna be empty! 5 different guns same problem with them all. Lets talk about the major flaw!
Why would you leave your air rifle in a corner for a month with shooting it? Seems like a big waste to me. :-)
I have more AEA rifles than I have fingers on both hands, and have never had any issue with any of them holding air.
I have an sf sniper, challenger pro .30, challenger pro .25 and the challenger .30....never had them lose air over time. I had some reg. Creep in my sf but bin swapped it out and no problems after. I had an fx wildcat that would never hold any air though.
Your 232 grain slug is going to get hung up because of the deep groves on it. If you take 1 slug and try to load it by hand into the breach you will understand what causes certain slugs to jam in the S45. The barrel "rifling" causes slugs to be hard to load if they have deep groves on them that get hung up on the rifling groves...
I really appreciate that info. This is my first 457 cal. So far, I have only shot the 155g slugs. I don't see the need to shoot the very heavy slugs in a semi auto.
@@backyardairgunsis it bad to shoot heavy slugs in a semi auto?
I agree with that. The semi auto rifles use some of the air pressure to reset the hammer.
I was just gonna comment that. I had a s45 and returned it. I might by another and cast my own smooth slugs