OFFICIAL Lian Li Strimer V2 for RTX 40 Series GPUs | Installation and Overview
HTML-код
- Опубликовано: 22 авг 2024
- Lian Li finally released the 12vhpwr adapter for the Strimer series.
Overview and installation -
TLDR: Actual adapter cable is HUGE and THICK, be aware before purchasing this that the adapter will fit in your case. Cases that have a smaller width will have difficulty fitting this. Actual RGB cable is very long too, which depending on your needs can be a good/bad thing.
------------------------------
Track: Falling - Declan DP [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Falling - Declan ...
Free Download / Stream: alplus.io/fall...
------------------------------
------------------------------
Morning Routine by Ghostrifter Official
/ ghostrifter-of. .
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/_mornin...
Music promoted by Audio Library • Morning Routine -...
------------------------------
---
Music: ”Drops In Mind” by Le Gang.
Watch RUclips:
• Le Gang - Drops I...
Download: hypeddit.com/l...
---
#lianli #rtx #nvidia #strimerplusv2 #rgb #asus #asusrog #corsair #geforce #asustuf #howto #gamer #pc #pcbuild #nvidia #amd #amdryzen
![Lian Li 12VHPWR Strimer Plus V2 (PCI-E 5.0) [L-Connect-3]](http://i.ytimg.com/vi/7hH9TggabPc/mqdefault.jpg)
My 4070 has one singular 8 pin connector
beautiful video, well done as always Negron Tech!
Thank you shina!!
You can use it with the ARGB adapter but they will act as a single strip so no fancy separate effects per lane of rgb strip if you wanted to use SignalRGB, for example
Nvidea really took the piss with this cable and how big these GPUs are getting, I would deffo get a 90 degree adapter but of course it depends whether or not that’ll fit on said gpus
Yea it’s really annoying, In hindsight I was lucky enough to go with a bigger case. It’s definitely shitty that the majority of the adapter cables are gigantic.
They didn't F up the strimmer orientation, if you were running the strimmer up over the top of your GPU then it would be oriented right. You have the option to flip it so you can choose which direction you want to install the strimmer....
I know, it’s mostly a comment in jest. In this case the way Asus orients the gpu connection is the issue lol.
I have the vertical GPU mount, same case Lian Li Lancool 3 and an Asus TUF Gaming 4070TI. With the vertical GPU mount you have a lot better choices for good esthetics for setting the Streamer Plus GPU cable. I think you should consider getting the GPU Vertical kit. Cooling is also better with a vertical GPU
It’s definitely something I consider!
Brooo finaly someone with the same card as me!!!
Can u plz tell me if this strimer works on our card??
Wanted to buy the strimer for the GPU but many ppl saying they cant find a strimer that works on the 4070ti...
@@MaxOwnez you need a 12vh to 3 8 pin, then you can just use 2 of the 3 8 pins since 300w are enough power for a 4070 ti.
By the way, vertical mounting is presumably worse for cooling than hotizontal. Your bottom fans throw fresh air directly at the gpu intakes, helping with refreshing.
I couldn't find your video of your PC build.
what cooler is that with the LED screen? I ended up getting the nzxt elite. Just seeing other options. Thanks.
It’s the asus Ryujin 2, was an excellent cooler but the nzxt is also amazing! You’ll def enjoy it!
You sound like Michael from gta v 😂
Thx man you helped me a lot i was worried that I'll have to use that fucking octopus ass Nvidia cable
Lmaoooo yea man I hate the default cable
So just want to make sure I am 100% understanding, you still used your graphics card provided power adapter? And plugged the strimer into the adapter? Or removed the adapter and plugged the cable from PSU straight into strimer? TIA.
The striker plugs into the gpu, the psu cable plugs into the strimer.
@@Mdntech3000 HI, can it connect direclty to 4070ti? it has only 12 pin plug but this has 12 plus 4 which is inseparable. Plz help me out ?
nice video, i have a question, where did you bought the led screen and how you installed?
It’s a rasberry pi elecrow 5 in monitor from Amazon. It mounted inside my case with standoffs.
@@Mdntech3000 does it work with the aero oc 4060 ti?
im confused. whats the point of buying a new strimer if you can detach the RGB from the strimer cable and use it with the new cables did you just return it?
There’s no specific reason to, if you watch my original video that’s exactly what I did.
I bought the new strimer just to be able to post a video about it and hopefully help people.
So I have the exact same GPU as you, but my 4080 came with a three 8 pin to 12 pin adapter and this strimer has 12 to 12, so how do you get this to fit the three 8pin adapter? or are you using a different connector for your GPU than what it came with?
There’s a striker that is specially 12 to 3x8 pin, you could buy that one.
With the strimer cable that has 3 8-pin, should you only plug in 2 8-pin cables if that's what the oem adaptor has? Like on a 4070ti?
The last build I did including a 4070ti has (zotac) had 3 x 8. If the one you have only has 2 x 8, then what you said should be fine…I’m not entirely sure though….you could get the 12+4 to 12+4 if your psu has that cable already though.
Is it going to cause any problems? Is it going to work the same like the original gpu cable or is it going to restrict some features?
No problems or restrictions. I’ve had no issues and read nothing on the cable having issues either.
@@Mdntech3000 Thank you so much
Enjoy man!
nice video!! i have one question... using this you have black screen 100% fan speed problem?....
Every 90 degree adapter and third party cables that I used at some point my PC stopped, the GPU fans stayed at 100% and I had to restart.... it just doesn't cause a problem when I use the adapter that came with the card.
I haven’t had a single issue tbh
Nice! thx 🥰
I don't know what Strimer to get I have the ASUS ROG STRIX 4070 OC and my power supply is the CORSAIR RM1200x
I don’t believe they have the 12vhpwr cable from the psu. Buy the strimer that has the 3x8 pin to 12vhpwr.
What's that LCD on the right? I mean, not the AIO, the other display. Thanks for sharing!
It’s a 5in elecrow raspberry pi monitor.
@@Mdntech3000 is there any animations collection anywhere to show in the screen?
Yes! Think about it as a secondary monitor, you can do/show whatever you want on it.
how do you use usb 2.0 header on mother board for all devices like 2 lian li contorller and ryuijin 2?the mb just has 2 usb2.0 ports.do you merg them into one?or using splitter?
I do use the usb 2.0 header. My motherboard actually has 3 usb 2.0 ports! I made sure when I was buying my parts that I got a mobo with 3 ports.
You can buy a splitter (or split them yourself, there’s guides on RUclips) or something like the nzxt hub.
@@Mdntech3000 tnx for your reply i see those guides on youtube,but im not sure its safe.is that safe combine 2 ports into one header?
It’s definitely safe to do. If you’re not comfortable you can just buy a splitter, I know off brand ones aren’t that expensive.
@@Mdntech3000 thx again🙏🏻
Just switched to a Corsair 5000d, wonder if this will fit in there with a 4070 Ti. Couldn’t close my glass on my old case hahah
Damn really…that sucks, honestly I’m not a fan of any Corsair cases 😟
Oops misread, it should fit in the 5000d no problem
Is the strimmer controller different than infinity fan controller? Would suck to have two controllers
Unfortunately yea they’re different and require separate controllers.
The Nollie32 controller can do your INF fans and the strimmers if you wanted.
Where can I buy the gpu strimer plus v2 cable not from micro center
It’s on Amazon as we speak! Although it’s a bit more expensive there.
So I had the same problem with my strimmers and the glass panel it’s been a year now and I have no clue what happened but I only get gpu display when I push them in with my hand honestly so weird now I’ll probably have to put them over the gpu instead of under.
That’s a very weird problem…I really have no idea how something like that would even happen.
So I noticed the RGB strips and the cable extensions are two separate pieces held together with clips to look like one piece. Could you get these and, instead of using the cable extensions, could you just clip the RGB strips onto your current power cable?
Absolutely! It’s actually what I did before the official 12vhpwr strimers came out. Check out my previous strimer video!
@@Mdntech3000 nice
Hello I’ve been trying to figure out what Lian Li Strimer I need. I have a Asus Rog Strix 4080 and my power supply is be quiet Pure Power 12M 1000W. A 12VHPWR to 12VHPWR ?
Does your PSU come with a 12vhpwr adapter? If so yes, then get 12>12
What's the name of that display screen on the top right and where did you get it from?
www.amazon.com/ELECROW-Raspberry-Touchscreen-Monitor-HDMI-Compatible/dp/B07FDYXPT7/ref=mp_s_a_1_1_sspa?crid=5ULIIMY55KKL&keywords=elecrow+5+inch+raspberry+pi+screen&qid=1683279700&sprefix=elecrow+5%2Caps%2C61&sr=8-1-spons&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyVFhCQkRVRzAxSVc2JmVuY3J5cHRlZElkPUExMDQ1MzEwTVRMRFBQMUNaS0lYJmVuY3J5cHRlZEFkSWQ9QTAwMzQwMTczMEZaTzU3WTlEOUdCJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Elecrow 5 in raspberry pi screen
@@Mdntech3000 It looks awesome. Thanks!
You mentioned the connector for new Strimer 40 series cable is very thick. You can actually take the black plastic housing off and it will look like the smaller connector other cables use!
Great idea and thanks for the advice! I might do this myself
@@Mdntech3000 No problem! For your SL-Infinity fans, do you have them all plugged into the controller and have L-Connect control the RGB?
They’re all plugged into rgb controller. Although I do have the Lian li rgb controller connected to the motherboard so I can use armory crate as well to control rgb.
@@Mdntech3000 L-Connect works well to control the RGB?
I honestly hate all proprietary software…but it does the job tbh. I feel like all the rgb control software sucks.
Hello i just buyed a PNY GeForce RTX 4070 Ti Verto, NZXT N7 Z790 motherboard. Do you know what i need then? i want to my motherboard and gpu
Depends on your psu look at some other comments. Most likely the 24 pin for mobo and 12vhpwr - 3x8 pin for gpu.
How did u do the colors on this, I want to do a joker theme and can't figure out how to do fans one color and the borders a different color
There’s a drop down in the fan settings where you can choose inside / outside
@Mdntech3000 when I do the drop down it changes all of my stuff
@Gam3ov3r08 lian-li.com/l-connect3/l-connect3-manual-2/?cn-reloaded=1&cn-reloaded=1
It’ll be in the sl inf tab section
@@Mdntech3000 thank you so much
How the best choise to Gigabyte Gaming Oc 16GB Geforce RTX4070TI Super GDDR6X - GV-N407TSGAMING OC-16GD
Depends on your psu ! Either of the 12vhpwr can work for card depending on psu cables.
Can I put the strimer plus v2 PCIE 5.0 to (adapter) PCIE 5.0 Power Cable 16Pin (12+4) to 2x8Pin that comes with the GPU and then after that to the PSU?
In theory you could but that over complicates it. I would just do two connections tbh if able.
Can anyone help me out with what case is this?
Lian Li Lancool 3
Can someone please tell me what strimmer cables Lian li V2 I need for my first pc build? I’m getting a gameax psu 1250w and a 4070 ti
Get the 16 pin to 3x8 pin.
What is the difference between v1 and v2?
V2 has the 12vhpwr cable for new nvidia gpus.
Would I need another L connect 3 controller to use both the triple 8 and 24 pin or do they both connect with just one controller
You only need one controller!
can you send the link for this to me here or comment on it as i want one for my 4090 ... plz thanks
If your psu can support it get this one
www.amazon.com/Lian-Li-Strimer-Plus-12VHPWR/dp/B0C13G4GPX/ref=mp_s_a_1_1?crid=38B5OYICDMJK7&dib=eyJ2IjoiMSJ9.sWpFXHqxUgSSoRd_lX2rn6Axh26BcmhxaMhRA2stMCXMVNYvLt_EP3fJxgnOFoozzp_Jkd5LYeXIE-XJNXe-z5gyMMnkGXSCvdKj0nqLUNZIT9hZyUqC1tzP4ZJ-Ke2ZW5ZJiCO2QAdgHtdT_CME3wlqJmTqUgypJS1gUvRVfEVKLehQhBvOlMUMIT891LpsM76g1bclbVSAzl01lHuDOw.xkYNMGpkbxpSR5HrePthrx_Ij78yJJeFmRrcX-EQAHY&dib_tag=se&keywords=strimer%2Bplus%2Bv2%2B12vhpwr&qid=1715338231&sprefix=strimer%2B%2Caps%2C140&sr=8-1&th=1&psc=1
Can someone help me out.
Im trying to figure out what strimmer cable i need to get.
Ive got the Asus stix 4090 OC, plus Asus Thor 1200w P2.
I'm currently using the cable that comes with the PSU. Does anyone know what strimmer cable i'd need to buy?
Driving me nuts trying to figure it out 😅
With the PSU you can get the 12+4 pin vhwpr to
12+4 pin vhwpr. www.amazon.com/Lian-Li-Strimer-12VHPWR-Light/dp/B0C13G4GPX/ref=mp_s_a_1_3?crid=1RVG9WNU8A0G4&dib=eyJ2IjoiMSJ9.cB444ppsNQTRv9V-5sJlFyDtUjm3SSZ5Opsid5xi3TPu5skVrhD8lt7OX_E-3UCQ6nvQGOUSCH7VS0Z7P10fViEqv7HQU-UbX41MSJcUvlr245IIWIee0UkF7amGU8ROWybMGL3Aj78iAdJn6-pTl3r7OjlsynC_5tBw5OLwlTvlK8QkDzN2Fy2RHZDSim_DxkMJbJbp4591mnW0lNf6sQ.zZwws16mnG7OCDjKwXzCx3pW543cG-4dwAORCGGYyzU&dib_tag=se&keywords=strimer+plus+v2&qid=1719540015&sprefix=strimer+plus+v2%2Caps%2C230&sr=8-3
No affiliate link. Sorry for late response.
@Mdntech3000 ah thanks for that, just order some 😀
i want to use on rtx 3070ti zotac amp holo black, will it be compatible/ possible ?
Can you give me some help? My video card came with a 12vhpwr to four eight-pin adapter, so which cable should I get to avoid problems or shorts with my video card?
You can get the 12vhpwr to 3x8 strimer! It’ll work no problem, no shorting.
@@Mdntech3000 are you sure? because the adapter cable that came with the video card is one with 4 of 8 pins
@felipecock1523 yes, it’s still rated…you can see a lot of 4090 users us it. You can also buy the 12vhpwr > 12vhpwr strimer if you have a 12vhpwr cable from psu.
@@Mdntech3000 I understand, thank you very much for your help, it will be very useful
What case is that in the video?
Lian li Lancool 3.
8:53 What the model of LCD display on right side from mother board?
It’s an elecrow rasberry pi 5 in monitor, can be found on Amazon.
Is it ready for RTX 4090? Can´t burn by itself?
It’s ready, official version has been out for a few months now. Haven’t read any issues regarding the connector.
What cable will I get with a 4080 Founders Edition?
Depends on your psu. Can’t go wrong with 12+4 pin to 3x8 pin though.
Which mini Display did you have in your PC? Do you have a link?
www.amazon.com/ELECROW-Raspberry-Touchscreen-Monitor-HDMI-Compatible/dp/B07FDYXPT7/ref=mp_s_a_1_3_pp?crid=3FRI1EV7GOZUO&dib=eyJ2IjoiMSJ9.XNZKS5bR9FtK_AwhMdSV46Gthmjh7RxSws2Rjrj1a35TmhpLjSJ4r6F6RDLXjEcZQPBHaFJQAjlIeqkeKtN70Z5XpTAlP3fMRTUi5TccoPzWZp2Uk1RmoSkPsCuDJOLTN33k6YwkK5MxWBn023ZSecSp9zAHsVYvR66-ix2Uqx4s0e-GfAI-CU07Ey6YOKYZS_nn5tfDMwkfduWl-QZZEg.DlQCalSHH7kTcBc1DPlJiHqRjI0pgc5OAkJtLYiL3wY&dib_tag=se&keywords=elecrow+5+inch+raspberry+pi+screen&qid=1709941109&sprefix=elecrow+%2Caps%2C142&sr=8-3
Thank you very much
My 4070 gpu uses an adapter that converts 2 8 pin pcie cable into a 12vhpwr can I connect the 12vhpwr strimmer cable straight into the adapter and use it like an extension cable or do I need to buy a separate pcie cable that has the 12vhpwr by itself without using the included adapter. Would I need to buy something like the Corsair power supply that has there 5.0 pcie cable and use that instead or can I just use the included pcie adapter that came with the gpu to connect straight into the strimmer cable?
Which strimer do you have?
@@Mdntech3000 I was planning on buying the 12vhpwr to 12vhpwr strimmer cable and just using it as a extension off my included gpu 12vhpwr adapter cable. Will that work?
@itskaizan that absolutely works, as long as you have a 12vhpwr coming from your PSU. If not just get either 8 pin strimer.
@@Mdntech3000 with the 8 pin version. I believe it comes with 3 x 8 pin do I need to used 3 separate pcie cables or can I get away with just using 2 pcie and then using one of the extra pigtail cable off the 2nd pcie for the last 8 pin? Or will that not be enough power to run the gpu. I have a gigabyte 4070 gpu
@itskaizan just get the 3x8 strimer to be safe. 12vhpwr connected to gpu then the 3x8 connected to gpu coming from the psu.
I have the msi rtx 4070 ventus with a single 8 pin connector. Is there a v2 strimer that will work with this gpu. I have been having a hard time finding info on it. Thanks!
You can just get the 2X8 pin and only connect
One. Representatives from Lian li support have confirmed it’s ok to do that !
@@Mdntech3000 cool thank you, but of course that means only one strip will work? My son has the 3 x 8 pin. I guess he could do that with that one as well and just have one strip work?
@kevinmalesic9430 both strips will work. The rgb strips get power from the controller. Look at my older Strimer video to get a better visual idea of it.
which cable would you get with a 4060 with only one 8 4+4pin connector? would you just get the 2x8 pin and not connect one of them?
Yes that works !
@@Mdntech3000 awesome thanks for responding. how would hide the other connector?
@@tylerrichard149 hey did you buy it ???....did that work out cuz i also have rtx 4060....plz respond
@@its_not_the_Ishu yea it did
@@tylerrichard149 thanks bro then i'll buy one ...i'm currently building pc with project zero mobo and corsair 2000d case r5 7700x ...and i'll upgrade gpu once new 5000 series gpu are launched
does this work on a 4070 with single 8 pin?
I though the 4070 had a 12 to dual 8 pin adapter?
I have bought this type for Lian Li Dynamic Mini and is not possible to close panel x.x
Yup I would figure it wouldn’t fit, sorry about that.
I wonder what cases they thounght it would work for, if it doesnt fit in their case
Yea it’s definitely a huge oversight. I’m starting to think they wanted people to vertically mount there gpu….but then that’s short sighted because what about people who don’t have a riser cable? What if their case doesn’t support vertical mounting?
It is crazy that they couldn’t trim / slim down the connector so it would fit in THEIR OWN cases.
Hi what lightning effect you use in the video of your strimer? Thanks!
Primarily use static effects switching between colors, all through l connect
I saw ur lights moving upwards slowly. Which effect is that?
Not sure since I’m at work right now, can find out when I get home.
No worries thanks for the tutorial!
if i have an RM850e and a PNY XLR8 4070 Ti then what cable would i need
Does your psu have a 12vhpwr cable? If so then get the 12 to 12 ping strimer.
@@Mdntech3000 no but it does have a 12+4 pin pcie cable that im pretty sure can connect from the psu to the card
I got the Gigabyte 4070, would I have to buy the 2x8 pin strimmer?
That’ll work fine! I think the 4070 gigabyte uses the traditional 8 pin?
yup just got mine
@@Mdntech3000
which ones would you get for a 4070 ti and a gigabyte Z790 motherboard
It depends on your psu, but you could get the 12 to 3x8 pin to be safe.
thanks, and this is the only one i have to buy or do i have to get another one that connects to my motherboard
@beamz684 if you don’t already have the mb 24 pin streamer then you would need to buy a lian li strimer controller
alright thanks so much
Hello, what status screen you have there?
It’s a raspberry pi mini monitor got it off Amazon.
Does this work on the the rog strix 4080 super
Yes
Yo which fans are you using on that pc ?
Lian li sl inf
I have this strimer and the 24 pin one but for some reason l-connect 3 doesn’t detect them with the controller, how can I fix this?
Are they in the correct ports ?
@@Mdntech3000 yes I have checked everything and it is installed correctly, it is very weird the rgb and the cable itself work just fine but l connect just can’t detect them
You might need an older version of l connect..L connect is trash tbh and I’ve had issues where using a different version of l connect solved my issues. I’m not sure what else it could be tbh .
@@Mdntech3000 ok I will try that thanks
Yea it’s hard to diagnose if I can’t see the connections too since they’re might be a problem there…but in this case it’s probably a software issue
Wow 🔥🔥
Will this work for a 4070 super?
Yes it will
Would this work with 4060Ti?
Don’t think most 4060ti have the 12vhpwr
nice video im new to pc building and i really want the lian li strimmer but idk if it works with the ASUS ROG Strix NVIDIA GeForce RTX 4070 Ti OC Edition
thanks...
@Mdntech3000
It depends on your PSU, if you already have a 12vhpwr then buy the 12>12 strimer. If not get the 12> 8 pin strimer adapter
@@Mdntech3000my psu is gonna be the nzxt c850w can you please see if it has the 12vhpwr bc i dont really know much about pc
thank you 1+ sub
@thunayan6533 do you have the psu in your possession now or did you just order it and waiting for it to come?
@thunayan6533 from what I’m reading, the c850 does not come with a cable for 12vhpwr. If you buy a striker get the 12vhpwr > 8 pin adapter.
How to make this yellow colour?
Using l connect or asus armory crate.
Will this work for a 2070super?
Yea just get the older striker v2 not the 12vhpwr
Hello, I have rtx 4070 FE, and asus z790 P motherboard. I saw from amazon that they have 24pin, triple 8 pin etc. Which one should I buy for both my GPU and motherboard?
Only one version of the 24 pin, the only difference is wether or not it comes with the controller.
For the GPU it depends on your power supply. Does your psu already come with a nvidia 12+4 vhpwr cable? Or does it just have 6+2 pin cables? Depending on the psu is going to dictate which gpu strimer to buy
@@Mdntech3000 my power supply is 850 Watts - Standard 80 Plus Gold w/ PCIE 12+4Pins Connector for PCIe 5.0 graphics cards [-33]. And I already have a Lian li controller cause I bought Lian Li SL Infinity fans. Basically I have a total of 2 controllers now. Which one do you recommend to buy? PW24, PW16 or the PW12?
So you can buy the 12+4 to 12+4 (male to female in other words) since you have a 12+4 from your power supply.
You’ll use the provided 12+4 pin connector from your psu to the female side of the strimer, then the male side to your 4070.
Looks like this - www.amazon.com/Lian-Li-PW16-8PV2-Strimer-Plus/dp/B0C253DP4W/ref=mp_s_a_1_4?crid=LOTUG2OTJX2O&keywords=lian+li+strimer+plus+v2+12vhpwr&qid=1685340370&sprefix=lian+li+strim%2Caps%2C73&sr=8-4&ufe=app_do%3Aamzn1.fos.006c50ae-5d4c-4777-9bc0-4513d670b6bc
Additionally, in my video this is what I’m using (12+4 to 12+4)
@@Mdntech3000 Thank you! how about for the motherbooard? which one should I buy?
my motherboard is: ASUS PRIME Z790-P WIFI D5 DDR5 ATX w/ Wi-Fi, 2.5GbT LAN, (4)PCIe x16,(1)PCIe x1, (3)M.2, (4)SATA
What fans are them please
All are Lian li sl uni inf fans 120s.
Warhammer 3!
Hell ya!!!!
🔥🔥🔥🔥🔥
This works with the Rtx4090?
Yes!
What gpu is that
Asus tuf 4080
The 3090ti has 3x8 & 12+4 pin, so this is also compatible with the 3090ti, right?
Yes! The one I linked is 3x8 to 12+4
@@Mdntech3000 Awesome! Thanks!
@@Mdntech3000I installed it today and it works great, but the 24pin strimer is plugged into the controller and the remaining open slots don't look compatible with this cable. Does it require a separate controller?
Which slot is the 24 pin connected to in the controller?
Use the top slot for 24 pin(or bottom depending on orientation of controller) and for gpu use right (or left depending on orientation) slot.
@@Mdntech3000 the 24pin is plugged into the top. The open slots look like they have more pins than this cable has.
What AIO is that
Asus rog Ryujin 2. There is now the Ryujin 3 that is out, 8th gen Asetek with a better screen.
Great aio, biggest issue is the availability of it and the price can get insane. Think the newest version is around 400 dollars which is just bullshit.
You need a cablemod 180 degree for gpu
I ended up figuring it out for this case, I’m happy with it now tbh.