Dji Mavic Mini Disassembly and Repair
HTML-код
- Опубликовано: 8 сен 2024
- Step-by-step instructions how to disassemble the mavic mini drone to replace the case, gimbal camera, main board, esc board, gps module, motor and any other broken parts.
Buy spare parts and tools on Amazon:
Screwdrivers set: amzn.to/2Dp1Rcm
Opening tools: amzn.to/2Zcwmdo
Magnetic Mat: amzn.to/2Rw4G2w
Tweezers: amzn.to/39rWix5
Motor Arms: amzn.to/3wdO14Q
ESC Board Module: amzn.to/3aODSSu
Gimbal Camera: amzn.to/3dEmnYC
Gimbal Rubber Holder: amzn.to/3jzQ80e
Camera-Cable: amzn.to/3hwq1ok
Camera Video Signal Cable: amzn.to/3yfn8Px
Cover Parts: amzn.to/3qFbScG
Top Cover: amzn.to/3jAUVyB
ALIEXPRESS:
Spare Parts: alli.pub/6fpiop
Motor Arms: alli.pub/5vgczl
Body Parts: alli.pub/5vgdc8
Gimbal Rubber Holder: alli.pub/5vgbkn
Accessories: alli.pub/5vgcoi
Gimbal Calibration: • DJI Mavic Gimbal Calib...
More DIY repair guides on www.how-fixit.com
FOLLOW ME:
Instagram: / howfixit
Facebook: / howfixit
Twitter: / howfixit
* DESCRIPTION *
Welcome to HowFixit. In this video, I'll show you how to disassemble the Dji Mavic Mini to replace any of the broken parts. For example, you lost control, the drone crashed, this video instruction help you repair your Mavic Mini.
Video will help to sort out the problems of IMU calibration errors, stabilization and GPS positioning errors. Often errors occur due to a software failure and these problems can be solved by updating the firmware. But unfortunately, many errors can be caused due to a hardware problems of the module. But don't worry, you can fix everything.
* Errors of Mavic Mini *
** If the Mavic Mini does not turn on and does not show signs of life, you should pay attention to the main board. Time code 5:50
** Dji Mavic Mini loses GPS signal or Code 30002 error appears indicating a weak GPS signal and unstable positioning, maybe the problem is in the GPS module. Time Code 6:39
** Camera with suspension stabilization - Gimbal. The most fragile part of the quadrocopter, it falls out when drone drop in 99% cases, but fortunately it is easily installed back into place in the quadrocopter. In 70% drop cases - Gimbal may crack or break the cable connecting the camera and the main board, this cable can be removed and replaced. Replacing the camera and cable - Time code 7:07
** ESC errors cause unstable operation of the motors or even loss of quadrocopter control, because the ESC board is responsible for controlling all four motors. Replacing the ESC / IMU board may be necessary if the Mavic Mini reports an ESC error that is NOT resolved by replacing the quadcopter motor (note that you may need to replace the motor again, as sometimes the original damaged ESC board may damage the new motor) - Time code 8:10
** Motor error or replacement hand with the motor - Time code 8:32
To replace the motor you need a soldering-iron. A motor error may be caused due to defective of the ESC board.
** Code 10001: Camera malfunction. Repairs required. Contact DJI Support for assistance
- All you can do is restart the drone. If it doesn’t help, replace or repair the Gimbal camera.
** Code 10016: Camera not calibrated. Image quality can be affected. Contact DJI Support for assistance.
- Calibrate the camera, if the error persists - replace or repair the camera.
** Code 30007 & 30008: No GPS signal. Unable to hover. Fly with caution
- Repair or replacement of the gps module is required.
** Code 30049: GPS Module Error. Restart Aircraft
- Restart the mavic mini. If it does not help, repair or replace the gps module.
** Code 30050: IMU calibration required. Calibrate IMU
In the settings, find the IMU calibration function and calibrate according to the instructions. If it does not help, repair or replace the gps module.
** Code 30055: IMU not calibrated. Calibrate IMU
- Repeat the same steps as with the Code 30050 error.
** Code 30060: Compass error. Ensure there are no metal or magnetic objects near the aircraft and calibrate it before use.
- If there are definitely no metal objects around mavic mini and calibration does not help - repair or replace the gps module.
** Code 30064: Unable to TakeOff.
- Make sure that nothing prevents the drone from taking off and that you are in the area where flights are allowed. If all conditions are met, but the error remains - restart mavic mini. Doesn't help - update the firmware. If again the error - need repair mavic mini ( but here it is need to understand which module is broken, the fastest is the problem in ESC module).
** Code 30168: Aircraft power insufficient. Fly with caution.
- The error most often occurs in high winds, but it can be due to a worn battery or a faulty ESC module.
** Code 40021: Gimbal IMU data error. Contact DJI Support for assistance
- Repair or replace GPS module.
#howfixit #mavicmini #diy #repair #ifix #mavicminirepair
After the replacement motherboard or gimbal, you will need to calibrate your drone. Some calibration processes can be done with the DJI Fly mobile app, but for some procedures, like camera gimbal calibration, you will need to use additional software. How to calibrate the gimbal watch this video tutorial ruclips.net/video/mu03HWXplM4/видео.html
Hi, my drone doesn't sync with the controller. What could be the issue ?
I repaired my own broken DJI drone and posted it on my RUclips but nobody watches them. That is why, i will just go back to my Solar Power training videos then. Thanks Mate for your great video.
I will watch it!
Please show how to fix arm on dji mini
I’m so happy I found your channel. Awesome job showing and explaining what’s going on. The extensive write up of possible error codes and what to do is amazing. Without your video I’m sure I would have done extensive life ending damage to my drone trying to fix it. Thank you thank you thank you! I tried ordering a part through your link but it is out of stock. I will use your links in the future so you get credit. Much appreciated my friend!😁
My mini fell off the roof of my car today. In its case. While I was driving. The flap for the battery came off completely but remained in-tact. I had to remove the top cover to get it back in and secured. This video helped tremendously.
Thank you very much 🙏😍💯💯💯😂❤️🐝🐝🐝🐝🐝🐝🐝🐝🐝🐝
Thank You! I crashed in a tree when I recovered the side rubber bushing came out of my gimbal and flipped on mine. Watching you reassemble was key to putting mine back in.
Thank you for the video!! It really helped me in replacing the flat cable to the camera. 😄
I would highly recommend using light heat to remove the hot glue from the cable connectors on the the main board. I used the plastic spudge tool and it took some of the coating off of the PCB. Thankfully that doesn't affect much, but it could easily tear off components or traces and you wouldn't be able to fix it.
Muito obrigado pela dedicção! Me ajudou muito. Agora é só ter coragem. Vamos lá!👍👍👍👍👍👍
Thank you for you're video helps prep me to fix my mini 2
Thank you ,replaced left front arm after crash with the help of your video 😃
This is amazing. Do you have a link for the main board as well?
Thanks you very much
your content is great, easy to follow instructions and clear and easy to listen to English... you rock.
thankyou for this video. Helped me replace the flat cable. Many thanks. Great video
Thank you very much for this educational video. Thank you, even though I know the English language, but I wrote these phrases on Google Translate
thank you very much for the video my friend, my mini 2 broke the flat cable in a fall...
Thanks for video! I get it!!!
Perfect video timing release. I put my drone on return to home and hit a tree in the way back. The wire that connects from the camera to the drone has snapped on my drone
Thank You for this in depth video of the mavic mini. Its helping me repair mine.
Amazing, can you do a video how to fix mini 2 as well pls. I broke the upper and parts of middle shell and I have to change it but I'm scared to not damage the drone. I'm not sure how to transfer the front led in a new case ecc. Thanks
Excellent video man, but there isn't link to the gps module, Could you share it?
very well explained. thanks
Hi, great video! Meanwhile any news how to special calibrate a new gimbal/ camera? Need extra software? Where to get and how to do?
Please can you show how to replace the gimbl cable
:: Vielen Dank für die sehr gute Instruktion.
Hello great informative video thanks.
How can I test this mini mavic if it wont power up?
My lights on the power meter lights come on when i click the power button- but nothing else comes on.
Thankyou
Hello, I browser the mavic mini mainboard but I don’t found it. Where is your link in the description where to buy it? Thank you
Me too
Hello can you tell me the name of the tools you used and were you bought them I’ve
Bought screwdrivers that are supposed to be for drones but can’t seem to remove the small screwdrivers on the corners
Your tools make it look so easy.
There is no link for the gps module.I have very weak gps cannot mantain a stable +12,13 sats or more in the city is impossible it falls down 6,7,4 than 0 as soon as i take off,in the city the more altitude dhe worse gps.In rural areas its better but still experiences loss of signal.The drone is brand new.I had another mavic mini but it crashed never had gps problems with it.You think is gps module faulty?
I have a question about the mini 2 ! What body shell part includes the battery door? Or is the door sold separately? Mine broke at the hinge.
Hi. It seems that my main board on my mavic mini is shot. I’m ok replacing it without any issues but was wondering how it affects my activation of my drone prior to the fault. ie does the new board have to be reactivated
hello very good and great video. I ask you if you can help me to refit the battery cover of the DJ mini2. Thanks
Hello I have broken just the little arms of the gimbal holder, is that easy to find or I have to buy the hole set including comerá?
Thanks let me know your thoughts
Thank you so much for this.
After 2 weeks I managed to get my mini wet, all seems to be working except I have code "110007 - battery communication malfunction" on all batteries. How can I determine what needs replacing?
Hi my friends Thank you very much for this educational video. Every things is very nice, Can you make a Dji Mavic Air 2 Repair Video Please Thank you.
Thanks for the tutorial. I'll be needing to watch this again I'm sure :-/
Great video. Please share the link for the GPS Module. I’ve been looking all over the internet and cannot find.
amazing video. But i have a question? what size phillips screwdriver is 1.5 ok?
Where can I buy the all parts of that dji mavic mini?
Can I use the mini 2 housing and motors on the mini 1? Since the mini 2 runs on the mini 1's battery, I think so.
Thank you, I really needed this video
Awesome Video!!! Just curious, can you turn a mavic mini into a mavic mini2 by replacing parts on the mavic mini?
Thank you for this tutorial. So the gps module is located above the camera? if so, I can mount the gps locator/tracker on the top of the drone in the middle.
Maybe on the battery door! Those small gps trackers.
Great video.
I think that the link to the opening tool (blue & organe) are not working. please repost
Oh well. I crushed my mavic mini it to a tree and gimbal came out from its rubber mounts. On closer inspection I noticed a tear on the ribbon cable and there was red error saying something about camera sensor . I purchased refurbished part and replaced it guided by this video. When I power in on now the whole gimbal is shaking like crazy and there are multiple errors likie: 40012, 10001, 30066, 30049, 30007 and a few orange ones.
Now. I do not blame the video! Its been a huge help. I am just wondering where did I fail and what else I can do to fix the problem.
Can anyone help me?
Thanks again
So i dropped my mini in water, it was in there for about 5 secs. I took out the battery and dried it with a hair dryer. I let it sit for about 6hrs and i re stsrted it. It indicates low battery (1 flashing light) and when i turn it on it gives me code 30064. The mini itself has the two lights on the right flash 3 times. What can it be.
Olá ! gostei muito e gostaria de saber por que o meu DJI perde o sinal com rádio controle , pode me ajudar ?obrigado
So helpful
Hi I was trying to fly my mini 2 yesterday. After complete setup the drone was not taking off as one of the propellers was not rotating. I tried multiple time but the results were same after which when I physically checked the wings of the drone it was tight/hard.
Any advices??
the screwdriver set is too big to fit in the hole for the bottom screws. I am pretty sure that you linked another set since the set I ordered by clicking the link wont fit to unscrew the bottom screws.
mavic mini gps module is very expensive. You have a link where we can buy it?
i need gps and imu module link ? because i dont find ? Thank you for support.
me too
Same here. Been looking everywhere and cannot find. eBay, Amazon out of stock.
What happened to your drone?
do you know How we can calibrate gimbal after change gimbal motors?
complimenti
I replaced both front arms but don't know to reset the spring clips
I need to replace the cable. Not sure whats it called. Cant upload the pic of the broken cable. Its not the one listed in the description. Its ESC flat cable.
My mini lens has foggy lens issue. While i fly, lens glass becomes blur as it gets some vapour, from inside of the glass and footage becomes unusable. Please help
Does replacing the (Transmission Flex Wire 3 in 1 flat cable) require calibration?
Any chance on a power button fix video my button is broken?
Hi friend, where I live there are a lot of ants so one day I left my mavic mini on the table, and they got into the drone and took out blue particles as if it were detergent, I know what the glue is, there is a risk that they have damaged the mainboard or something like that? Thank you
My drone fell and the DJI tech said the mother board broke, and the Singapore svc center don't repair and said they will send to HK for 1:1 exchange which cost almost the same as a new one, Question is if they or anyone sells the motherboard only and where can i buy it?
What diagnostic program do you use in your pc to determine the faults on a mavic mini ?
I’m about to replace a broken gimbal, is the coding problem still an issue?
Please help me... my mavic mini "battery data communication error" your solution?
Hi great video!! I never see someone disassembling the motor. I have a situation where a thread got into the axel of the motor, I need to open it to remove. Do you know how to do it? Thanks!
Easy remove the c-clip at the bottom of motor and pop the bell out.
Hello, you know how to fix error 40012, thanks
is the cable for camera the same like in Mini 2?
I crashed my music money and now it flies backwards when it's supposed to be level and calls out heavy wind warning do you have any suggestions
Hi how will i know which hardware is failing in power system hardware error?
How can we solve mavic mini drone linking with remote controller? Please help me
I don't see a link for the mavic mini mainboard
Donde comprar la placa principal?
What is for that cable shown on min 7.58 .?
Where the hell can I buy a new GPS/IMU Module for a Mini 2 ?? (p/n PP002025.02 ) .. all I can find are some used ones on Ebay for around $75-110 !! LOL.
Does anyone can help me I don't see the link to buy the main board o mother board
Можно вопрос, а барометр где находится? На том же модуле, что и GPS?
Wher is the mainboard link to buy
Same here
The Dji Mavic minim was dropped in water, the camera was working fine, but the gimbal was getting stuck and data error. I tightened the Wd40 to fix the gimbal. The gimbal problem has been solved. I am not getting a gimbal error. But now the camera image is not displayed. What could be causing this error? Error codes; 10001,10016
how can i solve this problem?
Hello, where do you sell the main board? help
Jika kesalahan sensor penglihatan code 180030 kenapa ya
Seems a Main Board replacement is not available.
Hi i found a mavic mini some months ago ,wasnt able to find the owner so i bougth a controller, but now i an not able connect them,
Would you have a solution?
Thanks
Have you read the manual? page 29,
Hi in relation to the camera, dji have made it impossible for self repair of swapping the gimbal. It needs to be coded using dji software with a code given by them when you submit the gimbal serial number, are you able to supply coded units ?
Hi,
I'm really upset to hear that such changes were made by DJI and now this is preventing the self repair gimbal replacement.
As soon as I find a way to solve this problem, I’ll definitely make a video.
How-FixIT hi any news on it yet
@@TheMbrist same problem here
@@howfixit mine says incompatible gimble data too....do I have to contact DJI?
@@howfixit this was after replacing the 3 prong cable...
Amazin
Let's tear down the the mini 2 and see the difference!
Hi just wondered do you know if its possible to switch an iphone 8 motherboard with the iphone 8 plusses
@How-FixIT
How-FixIT
No, the motherboard from iPhone 8 cannot be installed in the iPhone 8 plus, these motherboards have different sizes.
How-FixIT Thanks
I want the dji mini camera but it is costly
Круто! Как ты научился так англискийм пользоваться? Переехал?
I'm receiving error 40021 after replacing the gimbal. The flex and signal cable are original. Is there a way to clear the error?
I see a lot of people having a problem with this and it's like dji repair centers are the only ones with proper software to pair the drone with a new gimbal.
@@edwinderick72 Yeah, from what I've read, if you're past a certain update it will happen.
a na ruskom est kanal , slyshu rodnoj akcent?
My droone fpv no display plis help
@@Noname-jz4dp my hanphone iphone 6s 128Giga
👍👍👍👍👍👍
не подскажешь, где взять крепление под модулем? у меня крепление в хлам. модуль рабочий скорее всего. Спасибо
под каким именно модулем?
@@howfixit модуль gps
@@1990avalon если вы имеете ввиду черный пластик на котором крепится модуль gps, тогда придется искать бу модуль чтоб снять с него эту пластиковую деталь.
@@howfixitсогласен. нужен донор или 3д печать. можно попробовать заказать
I have an error of 30210 :\
Not a single screw from the first minute of the video comes out of my drone...typical of my luck. I think I'll just cut the f*cking thing apart and duct tape it back together.
Very useful. Thank you. But I think you confuse the words: "module" and "model". They are not pronounced the same and do not mean same. "Module" (meaning: "a portion of the assembly") is pronounced: "modool".
"Model" means a Movic vs. a Phantom, as an example.
Not making fun of you. I'm from Russia myself and had to learn the learn the language too. Just trying to help back.
Где версия на русском?
Horrible audio
I replaced the blue thermal paste with the one you use on pc. Is that ok?