I've installed many ceiling fans, and know how to do it, even still, I love watching you guys do anything. You two remind me of me and my Dad. We used to do all sorts of projects like this as well. My Dad has since past away but this brings back warm memories, Thank you! Love you guys!!
This man can make a video of how to sit on a chair and I'll still watch! very instructive and fun! You've got yourself another subscriber sir, thank you!!!
Gotta tell say ,It's guys like you that make RUclips GREAT!! I've installed ceiling fans before but not with a down rod. watched your video and all was good. Thank You for taking the time to make the video!! Greg from Ct
I like the way you operate. I am a retired electrician 40+yrs. You are spot on with your methods. I would do very little differently. Enjoying your videos and learning a variety of skills in all you do. 👍
Great camera work. It is so important to show every connection of wires and how it is completed. You did a great job. Commentary aligns with everything that is being shown on the video. Outstanding video production. Thank you.
yall make my job easier, im an independent contractor doing general construction, i love learning new tricks i have never seen a video that i did not learn something new, thanks guys keep up the amazing work, ps i love your quality standards, so much higher than the average contractor
The piece that always gets me is the trim piece around the canopy screws. Not all fans have them I guess, but it’s always tucked away under 3 layers of styrofoam. Also, the screw dropping struggle is real. Great video.
I've also done all this work dozens of times, you guys are dead on. It's great to see "regular guys" knocking all these hit list jobs out. Great work madmen!
I do a lot of fans in a 115 year pulp mill building converted to apartments. Ceilings range from 13 to 17 feet. What I use, and what the kids should shove in your stocking this year are Klien Screw holding screwdrivers. Things are awesome for fans and ceiling lights.
This is a phenomenal video. I love how you've walked through all the little details, great camera angles, great commentary. I also liked seeing you accidentally drop a screw or two or put the fan fasteners on the wrong side, then having to shorten the downrod because the Mrs. wanted it adjusted... All part of what goes into making a beautiful living space!
I installed many fans as a semi professional homeowner and landlord. The last one was 20 years ago, which means I’ll probably have to do it again soon. Thanks for the vid. Very informative.
Tutorials don't get better than this. Putting down the drop cloth is a great idea. I've spent a lot of time looking for dropped screws. Outside lights over gravel driveways are the worst. :)
Thank you for this video, it is the most informative I have ever seen. I had some fears about installing a ceiling fan until I saw this video. Thanks again for sharing.
I love old Hunter ceiling fans. We have 4 in our older home and they run super fast and quiet. I think all of them are 52 inches and on high they will blow you out of a chair. I absolutely hate the newer fans and especially the remote controls now. The newer Hunter ceiling fans don't seem to blow as well even on high and they all come with those stupid remotes to control the light and fan. I prefer to put my fan controls at the switch and have a fan control along with the light on one box. Hard to lose the controls that way. Love your work and videos. My son and I are remodeling an older home together and I think we have some similar energy and relationship you two have. Great video.
I am so glad you said that about lining up the stripped insulation on the joint rather than lining up the ends of the wire. So many guys, I see, line up the end of the wire with their lineman and then twist the joint. When you do it like that, your insulation is uneven at the bottom of the wire nut. I’d rather line up the insulation and then cut to wire nut length after you have twisted. So glad you said that!! Always drives me crazy!
Very nice video! I just rewired & strengthened all of my 8 ceiling fans. My home is 88 years old and now has modern fans. All 8 have their own remote control plus all 8 are voice controlled as well. Because all rooms have their own Alexa, to turn on a fan or a light all you need to do is ask it and no need to tell Alexa the room you want to control when you are in that room. There are 3 fan groups to control multiple fans from any location, first floor, second floor or all at once. Alexa has control for brightness and fan speed too. For power outages you can set it to last state or off when power returns. If WiFi is down, the wall switches and fan controls work just like normal. You can set routines and schedules if so desired. I notice that one of the fans you installed had a horizontal winter / summer switch. I like them to be vertical so I can remember up is for upward air flow and visa versa.
Great Video! I have installed dozens of ceiling fans over the years, for myself and others, and I can do it in my sleep now. However, it is always cool to see how others do things from a different (and professional) perspective. As for the ceiling gap above the fan canopy. Most modern Hunter fans, with the larger decorative canopies, have rubber pads between the larger metal hanging bracket arms and the ceiling. The arms can then be bent up or down to adjust for the canopy ceiling gap before installing the canopy screws. The system works great for a professional look. I am a bit OCD about that perfect look, so Hunter really came through here... .lol. Also, those Wago connectors are awesome! I have not used the old-school acorn nut connectors in years for any electrical projects. Keep up the good work! 👍
Been working in construction for around 20 years. Worked with and learned from electricians and contractors yet never knew or heard mentioned what the number letter designation meant on light bulbs. Lol… great piece of info for my back shelf knowledge lol. I cant wait to ask someone for the 11 8th light bulb hahahah
Ah, you reminded me of a long drop I had to had build back in 1988. We had an octagon tower element over the breakfast area - we needed a 9' drop. Just what you said, took a piece of 3/4" RGS pipe, filed down any irregularities, cleaned any oil residue (any store bought pipe bought RGS has residue) and did about 4 coats of rattle can white. Looked perfect. Everyone who looked at it couldn't believe the drop length. We did have to spend some time to balance that bad boy!
@@StudPack Actually we spliced them with wire nuts in the downwrod. Had to stagger them out since they couldn't sit side to side but they fit in the pipe. We figured it the downrod was grounded and not combustible.
Watching this video a year after it was published. But it definitely brings back memories from my days working in the electrical department of the local home center and putting up four fans in the two homes I've owned over the past twenty years. Honeywell made fans as early as the mid 90s. We carried one that had a thermostat in the wall switch at that time. Two other common bulb sizes: The bulb in your refrigerator is an A15 and a 3 way is an A21. Other letters are C for cone (night light bulbs), G for Globe (think what is usually above a bathroom mirror) and R for reflector (flood and spot lights) . A is "Appliance" and T is "Tubular" I've always connected black to black and then the light to the red (depending on the manufacturer, that wire in the fan can be red, blue or black with a white stripe)
I installed seven Hunter ceiling fans in my current house, no drop cloth and a lot of cursing at screws that fly everywhere when dropped from 7-8 feet up. I'm moving to a new house that's got thirteen pre-wires for ceiling fans that I'll have to install myself, I am definitely using that drop cloth trick. I'd make another recommendation: magnetic screwdrivers because getting those screws started at the awkward angles to lock in the shrouds was a big pain.
Learn more practical diy stuff in one video here than entire season of the scripted and rehearsed This Old House episodes. Like all the little features in a electrical box, I’ll never remember them all.
you won't remember them all no one does until they put into to practice, but being exposed to it has intrinsic value. you don't gain knowledge per say but you do gain understanding
Thanks again for the new-to-me info: I had never seen the fan installation box before-that sliding bar with 8-32 and 10-32 option is neat. Also, I noticed you had a triple-tap screwdriver (around 32:36) which wouldn't work for your metric ground screw. I have one and it has made my life easier. I volunteer in a RE-Store (Habitat for Humanity) and in refurbishing light fixtures often the brackets to attach to the boxes don't arrive with the used light fixtures. We end up using a universal-type bracket that has multiple spaced holes but usually only two are tapped. It is an easy matter to tap the holes which line up and place the 8-32 screws where needed. And one more thing-I don't know if they are packaged this way in the US, but I always refer to the "square" head as "Robertson" screws here in Canada. And not only can you exert more torque w/o stripping the head, they can be placed on the driver and inserted one-handed.
Three great electrical tips today. Light bulb size interesting for conversation. White drop cloth below ladder = old man strength (brains). Unibit for enlarging holes in wood is genius and safer/cleaner than trying to use a larger paddle/spade bit.
Have you ever had the pleasure of installing a ceiling fan that was built in 1921? Hunter made some really great fans in the day. But with that one you have to install a hanger in the attic for the down rod to attach to. Those fans only worked in one direction. So in in order to change the direction of air flow you change the pitch of the blades with a lever at the base of the blades. They were truly an engineering marvel.
This is the best tutorial for installing ceiling fans that I’ve ever seen, not just because of the attention to detail in your explanations, but because of the way you deliver it! You really care about what you do, and nothing about this longer video was boring. I’ve learned a lot, so thank you!
Great vid mate, I’ve done hundreds and hundreds of fans, we always fully assemble on the ground, blades and all, also take out the pin in the top of the rod and remove all the covers, makes getting the rod in easier. Also here in oz, 240v , real man’s electricity 😂😂😂 we can just screw the hanging bracket straight to the ceiling and conceal all the wiring behind the top cover, also most of our fans now come with plugs fitted to the bracket and the fan , so the house wiring attaches to the bracket and then the fan just plugs in once you lift it up , super easy 😃✌️
Great info on the bulb sizes 1/8"...never knew what that was for. Nice installs, and would like to see one with a remote installation. I'm about to change out 3 fans for some Hunters, and I just had to laugh when you asked how long before mom says it's too short! I seem to have that problem too with my wife, so now I always have her check before the final step...then it stays!
Oh trust me, my Euro friends... Some of us in the states hate freedom units just as much as you guys! The metric system is SO MUCH EASIER and actually makes sense!
25:08 Suggestion: place painters tape (couple of passes) over the down rod so when tightening with a wrench it doesn't scratch the down rod. Cheers. Loving the videos.
I personally loved the longer video, I’m sure others would agree this was fantastic work. Never need to skip ahead in studpack videos because there is 110% entertainment the whole way through can’t wait to see more progress on your other jobs on the go aswell. This rebuild is coming along beautifully. WOW
If you fully assemble the fan and then hang it I find easier. You don’t have to go up and down the ladder to assemble the fan. Just connect have the wires. Great professional work as always👍
Wago Lever Nut would had easily fit in that for sure. I'm not a fan of the push-in style. But most Electricians in Europe used the Wago Lever connectors. Keep the videos coming!! Awesome
I bought some aluminum rod and bent a hook on one end that is 90 degrees to the rod then another hook on the other end. Then when I work on a fan I hand the ball end on the larger hood and then hood the other end to the box so it will leave more room to wire everything up. My Dad used to cut up a coat hanger and do the same thing. I think I hung 6 fans in one of our houses in a day and it really helps with getting the wires connected and tucked out of the way if you have a bit more room.
That fan/light switch that came with the Hunter fan is my favorite non- remote enabled switch. I’ve gone through several fan/light switches over the years for all my fans (I live in AZ, fans in almost every room) and that is the one that has made the keep-list. (Edit: yes you can buy them separately.) Now if only it was Alexa enabled as well!
love watching your videos... did not know how light bulb type and size worked. I don't know if you have ever mentioned it or not.. green square is a a #1 Robertson..yellow is #0.. red is #2.. black is#3 and brown is #4. Thank you for the great content..you guys do amazing work!!
When attaching fan blades, I always attach all of them with the screws just barely snugged up, then go around and tighten them all down kind of medium-firm, and around one more time to full tightness. It seems to let them settle into position, so to speak, nice and even around the perimeter of the motor, with less chance of one being canted off to the side and therefore out of balance.
Suggestion: The handiest tool for electrical (and many more) projects is an electric screwdriver. But, not any electric screwdriver; this one by Dewalt: DCF680N2. This particular kit comes with two (2) batteries. It is "super" handy. Press the single button, and tip/rock the tool in the direction you want the screw to turn. It takes off in that direction like magic. The further you turn, the faster it goes. It has a clutch that can be set to control tightness. You can tighten until the clutch clicks, then turn the entire tool to verify it is as tight as you want. It can be configured like a drill with a pistol grip, or straight like a screw driver. It makes really quick work of screwing in the #6 screws that hold switches and outlets to the box. Check it out - you will love it!
Another great video. Didn't know about the bulb size code. Only change I would have made was to wrap the tip & threads of the ground screw inside the tube with some tape to prevent a nick of the wires.
I do not have a angled drill bit starting block :) But in a pinch I have found that several wraps of painters tape, will allow the drill bit enough tension to bite the metal before trying to skid around. Not as slick as above, but will allow you to get the job done.
A fan store owner told me, and his installer reiterated, that fan blades should be installed on the fan motor in the order that they are stacked in the packaging. They are stacked so that when installed they will be at the best balance point. This will require less monkeying with lead tape to balance the fan and prevent wobble at higher rotation speeds. It doesn’t matter whether you install them top to bottom or clockwise/counterclockwise on the motor. They just must be installed in the order they are stacked in the packaging. The motor is very precisely balanced during manufacture, so the only variable in the balance equation is the blades. The blades are weighed very accurately after manufacture, and are selected so that they will complement each other when mounted in order.
Welcome to team red. Now give the brushless tools to Jordan and go out and get you a fuel set. You can thank me later lol. Love your videos. Just found you guys about a month ago and I have already binges damn near all your videos. Love the content. Keep it up.
We run red, fuel is the move… i do have dewalt tools and got a great deal at lowes on an xr wood working kit Xr jigsaw Multitool Sander Blades and paper Charger/5.0 flexvolt battery Large bag for carry $299
Great video! I have but 1 suggestion, invest in a rubber strap wrench or place a rag between the jaws of the pliers and the finished surface of the piece you're working on
Love the videos, the longer the better 👍 I put in one of those Honeywell fans for my mother in law, it has the curved blades and puts out a lot of air, really pleased with it. Didn't know about bulb measurements, that's pretty cool, thanks for the lesson. P.S. isn't the "square drive" a Robertson bit?
Quick tip I've been doing for years .. a lil thread locker on the canpoy bracket screws for extra security.. anything that's going to be moving or vibrating above head I use a lil drop of threadlocker
Very well explained and done, by the way could you use a non conducting Ladder, Fiberglass may be suitable for electrical work.I really watching your videos, always to me is Real Work!
An electrician taught me a trick. Put your fan blades ad light kit on before you hang the fan. Saves you a bunch of time. Just push fan to the side to get up to wire. Also strip wires before you hang it.
Another fun and informative video -- the great father/son dynamic is fun to watch! IMO ceiling fans can be pretty basic/straightforward install or really a pain with lots of small screws etc -- how blades attach is biggest variable. That small fan you put in was NOT an easy one. Keep the videos coming!
It's impressive how you don't get frustrated when you have to re-do something. I dropped my cotter pin into the motor housing, my down rod was too short, I had a stripped screw in my old junction box, and I broke a bulb. In the 2nd room, the junction box was too high, had to get spacers, we tried with and without a downrod, and apparently when we put the blades on, we accidentally rotated the housing so we can't get to the winter/summer switch. So frustrated. My son and I were yelling at each other every 30 minutes.
I've installed many ceiling fans, and know how to do it, even still, I love watching you guys do anything. You two remind me of me and my Dad. We used to do all sorts of projects like this as well. My Dad has since past away but this brings back warm memories, Thank you! Love you guys!!
"Video a little longer than usual"....are you kidding me, enjoyed every minute of it 👍
yep super!
This man can make a video of how to sit on a chair and I'll still watch! very instructive and fun! You've got yourself another subscriber sir, thank you!!!
Never new the bulb numbers were 1/8ths of an inch. That was fantastic to learn! Great video as always boys.
Didn't even notice it was a 35 minute video, it's as entertaining as always! Keep up the great work guys!
Gotta tell say ,It's guys like you that make RUclips GREAT!! I've installed ceiling fans before but not with a down rod. watched your video and all was good. Thank You for taking the time to make the video!!
Greg from Ct
Forgot to add,my wife came in and 5 seconds Oh is it supposed to be that low Lol
I like the way you operate. I am a retired electrician 40+yrs. You are spot on with your methods. I would do very little differently. Enjoying your videos and learning a variety of skills in all you do. 👍
I thought red was for 3 way light differentiation?
Great camera work. It is so important to show every connection of wires and how it is completed. You did a great job. Commentary aligns with everything that is being shown on the video. Outstanding video production. Thank you.
Thx Mikey 👊👍
I sleep better knowing there are people like Paul and Jordan out there.
I needed this video a couple months ago when I renovated my master bedroom and replaced my fan. Nice video as always. Thanks guys!
yall make my job easier, im an independent contractor doing general construction, i love learning new tricks i have never seen a video that i did not learn something new, thanks guys keep up the amazing work, ps i love your quality standards, so much higher than the average contractor
The piece that always gets me is the trim piece around the canopy screws. Not all fans have them I guess, but it’s always tucked away under 3 layers of styrofoam. Also, the screw dropping struggle is real. Great video.
Your sense of humor about hammering that like button makes me crack up. A joy to watch. Thanks a bunch.
I've also done all this work dozens of times, you guys are dead on. It's great to see "regular guys" knocking all these hit list jobs out. Great work madmen!
I do a lot of fans in a 115 year pulp mill building converted to apartments. Ceilings range from 13 to 17 feet. What I use, and what the kids should shove in your stocking this year are Klien Screw holding screwdrivers. Things are awesome for fans and ceiling lights.
This is a phenomenal video. I love how you've walked through all the little details, great camera angles, great commentary. I also liked seeing you accidentally drop a screw or two or put the fan fasteners on the wrong side, then having to shorten the downrod because the Mrs. wanted it adjusted... All part of what goes into making a beautiful living space!
I installed many fans as a semi professional homeowner and landlord. The last one was 20 years ago, which means I’ll probably have to do it again soon. Thanks for the vid. Very informative.
Your attention to detail is great! I love the fact that you match the color temperature of the lights.
Tutorials don't get better than this. Putting down the drop cloth is a great idea. I've spent a lot of time looking for dropped screws. Outside lights over gravel driveways are the worst. :)
Thank you for this video, it is the most informative I have ever seen. I had some fears about installing a ceiling fan until I saw this video. Thanks again for sharing.
Glad it was helpful!
When I watch your videos I get sucked down a worm hole. I just hit one after the other. Awesome stuff. Thanks for sharing your expertise.
You guys rock! It's great to see father and son working together and getting it done.👍
I love old Hunter ceiling fans. We have 4 in our older home and they run super fast and quiet. I think all of them are 52 inches and on high they will blow you out of a chair. I absolutely hate the newer fans and especially the remote controls now. The newer Hunter ceiling fans don't seem to blow as well even on high and they all come with those stupid remotes to control the light and fan. I prefer to put my fan controls at the switch and have a fan control along with the light on one box. Hard to lose the controls that way. Love your work and videos. My son and I are remodeling an older home together and I think we have some similar energy and relationship you two have. Great video.
OMG.... 5/16 on a wire nut. I've struggled for so many years. Thank You Thank You :)
I am so glad you said that about lining up the stripped insulation on the joint rather than lining up the ends of the wire. So many guys, I see, line up the end of the wire with their lineman and then twist the joint. When you do it like that, your insulation is uneven at the bottom of the wire nut. I’d rather line up the insulation and then cut to wire nut length after you have twisted. So glad you said that!! Always drives me crazy!
Nice attention to detail in your effort to match the color for all the light bulbs.
Thx 👍
Jordan and Paul, thanks for the shoutout, but you can’t make me do a quad shot anymore. We laughed and watched with glee!
I watch a lot of craftsmen, you have become my favorite in the home contractor.
Thx 👊👍
Very nice video!
I just rewired & strengthened all of my 8 ceiling fans. My home is 88 years old and now has modern fans. All 8 have their own remote control plus all 8 are voice controlled as well. Because all rooms have their own Alexa, to turn on a fan or a light all you need to do is ask it and no need to tell Alexa the room you want to control when you are in that room. There are 3 fan groups to control multiple fans from any location, first floor, second floor or all at once. Alexa has control for brightness and fan speed too. For power outages you can set it to last state or off when power returns. If WiFi is down, the wall switches and fan controls work just like normal. You can set routines and schedules if so desired.
I notice that one of the fans you installed had a horizontal winter / summer switch. I like them to be vertical so I can remember up is for upward air flow and visa versa.
Great Video! I have installed dozens of ceiling fans over the years, for myself and others, and I can do it in my sleep now. However, it is always cool to see how others do things from a different (and professional) perspective. As for the ceiling gap above the fan canopy. Most modern Hunter fans, with the larger decorative canopies, have rubber pads between the larger metal hanging bracket arms and the ceiling. The arms can then be bent up or down to adjust for the canopy ceiling gap before installing the canopy screws. The system works great for a professional look. I am a bit OCD about that perfect look, so Hunter really came through here... .lol. Also, those Wago connectors are awesome! I have not used the old-school acorn nut connectors in years for any electrical projects. Keep up the good work! 👍
Been working in construction for around 20 years. Worked with and learned from electricians and contractors yet never knew or heard mentioned what the number letter designation meant on light bulbs. Lol… great piece of info for my back shelf knowledge lol. I cant wait to ask someone for the 11 8th light bulb hahahah
Thx Mike 👍
Great idea about drop cloth and dropping small screws from ceiling fan!! I have done it I think every time I put up a fan!! Keep up the good work!!
Extremely thorough explanation of ceiling fan installation. Thank you!
Every time I watch one of Stud Pack's videos, I learn something new. Love you guys. Keep them coming!
Ah, you reminded me of a long drop I had to had build back in 1988. We had an octagon tower element over the breakfast area - we needed a 9' drop. Just what you said, took a piece of 3/4" RGS pipe, filed down any irregularities, cleaned any oil residue (any store bought pipe bought RGS has residue) and did about 4 coats of rattle can white. Looked perfect. Everyone who looked at it couldn't believe the drop length. We did have to spend some time to balance that bad boy!
Cool. The wires were long enough?
@@StudPack Actually we spliced them with wire nuts in the downwrod. Had to stagger them out since they couldn't sit side to side but they fit in the pipe. We figured it the downrod was grounded and not combustible.
👍
Hey Paul, When I install ceiling fans I use my magnetic wrist band! It's a trooper when it comes to not losing my screws into the oblivion!
Awesome video guys!, my son Loves fans, we've watched this one a few times now. every video is a delight.
Watching this video a year after it was published. But it definitely brings back memories from my days working in the electrical department of the local home center and putting up four fans in the two homes I've owned over the past twenty years.
Honeywell made fans as early as the mid 90s. We carried one that had a thermostat in the wall switch at that time.
Two other common bulb sizes: The bulb in your refrigerator is an A15 and a 3 way is an A21. Other letters are C for cone (night light bulbs), G for Globe (think what is usually above a bathroom mirror) and R for reflector (flood and spot lights) . A is "Appliance" and T is "Tubular"
I've always connected black to black and then the light to the red (depending on the manufacturer, that wire in the fan can be red, blue or black with a white stripe)
I installed seven Hunter ceiling fans in my current house, no drop cloth and a lot of cursing at screws that fly everywhere when dropped from 7-8 feet up. I'm moving to a new house that's got thirteen pre-wires for ceiling fans that I'll have to install myself, I am definitely using that drop cloth trick. I'd make another recommendation: magnetic screwdrivers because getting those screws started at the awkward angles to lock in the shrouds was a big pain.
I hear ya Robert. I have 17ft ceilings, I think I even made up a couple of curse words. One of the screws I never did find...
Learn more practical diy stuff in one video here than entire season of the scripted and rehearsed This Old House episodes. Like all the little features in a electrical box, I’ll never remember them all.
you won't remember them all no one does until they put into to practice, but being exposed to it has intrinsic value. you don't gain knowledge per say but you do gain understanding
Thanks again for the new-to-me info: I had never seen the fan installation box before-that sliding bar with 8-32 and 10-32 option is neat. Also, I noticed you had a triple-tap screwdriver (around 32:36) which wouldn't work for your metric ground screw. I have one and it has made my life easier. I volunteer in a RE-Store (Habitat for Humanity) and in refurbishing light fixtures often the brackets to attach to the boxes don't arrive with the used light fixtures. We end up using a universal-type bracket that has multiple spaced holes but usually only two are tapped. It is an easy matter to tap the holes which line up and place the 8-32 screws where needed. And one more thing-I don't know if they are packaged this way in the US, but I always refer to the "square" head as "Robertson" screws here in Canada. And not only can you exert more torque w/o stripping the head, they can be placed on the driver and inserted one-handed.
Thx Bob 👍. Robertson was Canadian but I’m sure you know that 👊
Three great electrical tips today.
Light bulb size interesting for conversation.
White drop cloth below ladder = old man strength (brains).
Unibit for enlarging holes in wood is genius and safer/cleaner than trying to use a larger paddle/spade bit.
Have you ever had the pleasure of installing a ceiling fan that was built in 1921? Hunter made some really great fans in the day. But with that one you have to install a hanger in the attic for the down rod to attach to. Those fans only worked in one direction. So in in order to change the direction of air flow you change the pitch of the blades with a lever at the base of the blades. They were truly an engineering marvel.
I’ve done a few older fans that hung off of an eyebolt. Never seen blades that reverse like that 👍
Big box stores have different length and color down rods. Your method works if the store isn't close. Great video
This is the best tutorial for installing ceiling fans that I’ve ever seen, not just because of the attention to detail in your explanations, but because of the way you deliver it! You really care about what you do, and nothing about this longer video was boring. I’ve learned a lot, so thank you!
Great vid mate, I’ve done hundreds and hundreds of fans, we always fully assemble on the ground, blades and all, also take out the pin in the top of the rod and remove all the covers, makes getting the rod in easier. Also here in oz, 240v , real man’s electricity 😂😂😂 we can just screw the hanging bracket straight to the ceiling and conceal all the wiring behind the top cover, also most of our fans now come with plugs fitted to the bracket and the fan , so the house wiring attaches to the bracket and then the fan just plugs in once you lift it up , super easy 😃✌️
11:37 no wonder this guy works fast, he's got three hands.
Looks good, during the start as electrical contractor installing fans, all ways used lock tight on fan blade screws it keeps them from coming loose .
I put blades on before laying fan in cradle. Have to be careful with blades but saves neck muscles and much easier. Great videos.
Great info on the bulb sizes 1/8"...never knew what that was for.
Nice installs, and would like to see one with a remote installation.
I'm about to change out 3 fans for some Hunters, and I just had to laugh when you asked how long before mom says it's too short!
I seem to have that problem too with my wife, so now I always have her check before the final step...then it stays!
Excellent camera work Jordan! I can see every detail.
Oh trust me, my Euro friends... Some of us in the states hate freedom units just as much as you guys! The metric system is SO MUCH EASIER and actually makes sense!
25:08 Suggestion: place painters tape (couple of passes) over the down rod so when tightening with a wrench it doesn't scratch the down rod. Cheers. Loving the videos.
Hey I learned something new today about light bulb sizes :-)
I personally loved the longer video, I’m sure others would agree this was fantastic work. Never need to skip ahead in studpack videos because there is 110% entertainment the whole way through can’t wait to see more progress on your other jobs on the go aswell. This rebuild is coming along beautifully. WOW
If you fully assemble the fan and then hang it I find easier. You don’t have to go up and down the ladder to assemble the fan. Just connect have the wires. Great professional work as always👍
Wago Lever Nut would had easily fit in that for sure. I'm not a fan of the push-in style. But most Electricians in Europe used the Wago Lever connectors. Keep the videos coming!! Awesome
The wagos also make connections between solid and stranded wire more secure and much easier to do while up on a ladder!
I bought some aluminum rod and bent a hook on one end that is 90 degrees to the rod then another hook on the other end. Then when I work on a fan I hand the ball end on the larger hood and then hood the other end to the box so it will leave more room to wire everything up. My Dad used to cut up a coat hanger and do the same thing. I think I hung 6 fans in one of our houses in a day and it really helps with getting the wires connected and tucked out of the way if you have a bit more room.
That fan/light switch that came with the Hunter fan is my favorite non- remote enabled switch. I’ve gone through several fan/light switches over the years for all my fans (I live in AZ, fans in almost every room) and that is the one that has made the keep-list. (Edit: yes you can buy them separately.) Now if only it was Alexa enabled as well!
Great video. One of the best step by step out there. Good job on it
love watching your videos... did not know how light bulb type and size worked. I don't know if you have ever mentioned it or not.. green square is a a #1 Robertson..yellow is #0.. red is #2.. black is#3 and brown is #4. Thank you for the great content..you guys do amazing work!!
Loving the content guys!!! Im on covid watch from work and y'all are keeping me entertained and from going crazy stuck here at the house, lol.
Much appreciated 💪👍
Once again, excellent professional work. You boys rock!!!
Disculpen ese ventilador lleva recector o no
When attaching fan blades, I always attach all of them with the screws just barely snugged up, then go around and tighten them all down kind of medium-firm, and around one more time to full tightness. It seems to let them settle into position, so to speak, nice and even around the perimeter of the motor, with less chance of one being canted off to the side and therefore out of balance.
Wow, I REALLY wish this video was available a year ago. Great video you guys, and my wife would have reacted the same way
1:48 oh, WE HAVE ALL BEEN THERE, at least ONCE🤣
If it happens twice, well…..🤪
Great vids and great times. Enjoy hanging out with you both✌🏻
You remind me of when I used to solder guitar and microphone cables, if you forgot to put the strain relief on and you solder it...worst day ever. :)
Really enjoy how you explain things. I have that same big fan. Very helpful video thank you!
The controller for the hunter fan is pretty cool, only needing a single switch. Nice design.
26:55-26:58 it's all good Jordan, we've all been there, haha.
The same video you mentioned wago’s you found a trashed wire nut connection 😂
Still get a lot of respect for showing the real picture 👍🏼
Suggestion: The handiest tool for electrical (and many more) projects is an electric screwdriver. But, not any electric screwdriver; this one by Dewalt: DCF680N2. This particular kit comes with two (2) batteries. It is "super" handy. Press the single button, and tip/rock the tool in the direction you want the screw to turn. It takes off in that direction like magic. The further you turn, the faster it goes. It has a clutch that can be set to control tightness. You can tighten until the clutch clicks, then turn the entire tool to verify it is as tight as you want. It can be configured like a drill with a pistol grip, or straight like a screw driver. It makes really quick work of screwing in the #6 screws that hold switches and outlets to the box. Check it out - you will love it!
Another great video. Didn't know about the bulb size code. Only change I would have made was to wrap the tip & threads of the ground screw inside the tube with some tape to prevent a nick of the wires.
Wow I learned something todfay! the number is the 1/8's of an inch. I guess that makes sense now but never realized it. Thanks!
I do not have a angled drill bit starting block :) But in a pinch I have found that several wraps of painters tape, will allow the drill bit enough tension to bite the metal before trying to skid around. Not as slick as above, but will allow you to get the job done.
A fan store owner told me, and his installer reiterated, that fan blades should be installed on the fan motor in the order that they are stacked in the packaging. They are stacked so that when installed they will be at the best balance point. This will require less monkeying with lead tape to balance the fan and prevent wobble at higher rotation speeds. It doesn’t matter whether you install them top to bottom or clockwise/counterclockwise on the motor. They just must be installed in the order they are stacked in the packaging. The motor is very precisely balanced during manufacture, so the only variable in the balance equation is the blades. The blades are weighed very accurately after manufacture, and are selected so that they will complement each other when mounted in order.
Never heard that 👍. Not in any installation instructions 🤔
That seems very suspicious!
Couldn’t hurt 🤷♂️✌🏻🇺🇸
I liked your explanation about what B11Bulb means. I didn't know that. Thank you.
Welcome to team red. Now give the brushless tools to Jordan and go out and get you a fuel set. You can thank me later lol. Love your videos. Just found you guys about a month ago and I have already binges damn near all your videos. Love the content. Keep it up.
We run red, fuel is the move… i do have dewalt tools and got a great deal at lowes on an xr wood working kit
Xr jigsaw
Multitool
Sander
Blades and paper
Charger/5.0 flexvolt battery
Large bag for carry
$299
The fuel multitool is $229 bare tool at hd
I love watching you guys. Do you take free internship work. I always wanted to learn how to do my own projects, but I have had no one to teach me.
That was great! Very informative and very helpful . Love the trick for the use of a drop cloth. Keep up the great videos 🤠
Really loving the longer video great tutorial on installing ceiling fans god bless you guys
This is a great great great video! I really loved that you actually shared ! Many others say they do but… not so much.
Fantastic work guy's, great education.
Excellent video! Nice guessing on how long the chief designer requests a change. Works the same in my house! Like button cooled
Great video! I have but 1 suggestion, invest in a rubber strap wrench or place a rag between the jaws of the pliers and the finished surface of the piece you're working on
I love the video close-ups. Thank you for the awesome tutorial.
Hit me with a Heart. This channel is what's up!
Love the videos, the longer the better 👍 I put in one of those Honeywell fans for my mother in law, it has the curved blades and puts out a lot of air, really pleased with it. Didn't know about bulb measurements, that's pretty cool, thanks for the lesson. P.S. isn't the "square drive" a Robertson bit?
👍 That drill guide is slick; thanks for the video and tips.
I prefer the 3M beige and red wire nuts. It’s hard for me to use the wagos I bought. Great video guys!
Always learn something new with you guys, awesome...
Great job boys! I always use my cordless on all them screws
Quick tip I've been doing for years .. a lil thread locker on the canpoy bracket screws for extra security.. anything that's going to be moving or vibrating above head I use a lil drop of threadlocker
Very well explained and done, by the way could you use a non conducting Ladder, Fiberglass may be suitable for electrical work.I really watching your videos, always to me is Real Work!
Liked & Subscribed! Great video! Appreciate you guys putting these out! Looking forward to learning more from your channel!
Thanks for watching guys! If you're not subscribed scroll back up and help us get closer to that 100k mark!
An electrician taught me a trick. Put your fan blades ad light kit on before you hang the fan. Saves you a bunch of time. Just push fan to the side to get up to wire. Also strip wires before you hang it.
Cool thx 👍
I love my Hunter fan... talks to Alexa... VERY good air movement!
Another fun and informative video -- the great father/son dynamic is fun to watch! IMO ceiling fans can be pretty basic/straightforward install or really a pain with lots of small screws etc -- how blades attach is biggest variable. That small fan you put in was NOT an easy one. Keep the videos coming!
It's impressive how you don't get frustrated when you have to re-do something. I dropped my cotter pin into the motor housing, my down rod was too short, I had a stripped screw in my old junction box, and I broke a bulb. In the 2nd room, the junction box was too high, had to get spacers, we tried with and without a downrod, and apparently when we put the blades on, we accidentally rotated the housing so we can't get to the winter/summer switch. So frustrated. My son and I were yelling at each other every 30 minutes.