In my opinion, you should get the work wheels. Love a good stanced look. My G is coming along very nicely but have a lot more to do. Almost bought some work wheels for my first ever wheel but decided not too. Anyways dope G , keep up the great work and love your content.
If you don't like my top 3 picks of wheels, tell me what wheel you think I should get. My top 3 picks are: 1. Work Durandal DD10.5 2. Foose Phoenix - F451 Concave 3. SSR Executor Cv01
I kniw most will say Work. But personally when I look for wheels, I'm looking to see how difficult or easy it is to clean them after purchase. I like all of your choices. But the last two, and especially the last one is my fave. It's lose to mine..
The first 2 are good but just too "busy" (too many spokes, too much cleaning and too much of a "bird's nest"). The third set are my preference. Personally, I really like a cone-shaped wheel with a deep lip on the perimeter/edge (no chrome! We both agree on that)...BUT, (again just MY opinion) I prefer less spokes; 5 would be MY preference (blame it on the the Ferrari fan in me?), although 6 or 7 spokes would still look awesome on the right wheel. Did you consider Vossen wheels at all? I digress; to answer your question: the 3rd set without a doubt! ;-)) For my final 2-cents: I wouldn't go bigger than 19" for daily drivers(?). I know you have 20's; they DO look excellent and are perfect for showing the car, but I suspect you give up some drive-ability? Bad roads, pot holes, fear of bent rims, etc.?
I bought Volk RE30s before they discontinued. Gloss Black to match the car. 19x11 rear and 19x10 front while running pilot supersports. Would like to get another set also in a bronze or gold. 18's most likely to get more tire than the 30 and 35's on the car now.
Mog35's foose wheels are my favorite and i'll be getting those for my build soon, but i think the executor CV01 ssr wheels are more your style, its simple yet aggressive, and would compliment you G really well 👌
I don't follow trends. 1st set is my choice. Always dug polish lip dark center. Foose is a great guy to meet but I don't like his custom style too yuppy.
CV01's in a 19 is what I would go with. Gives you more rubber on the wheel looks good lets you see the calipers and rotors if you upgrade. but if you want to drop it real low then any of those choices are great but please dont stance out your G. If you love the look of the ride cambered out and stanced fine but the G imo was made for proformance and when you stance it out it is all about the looks and looks are relative some people love it some people hate it but is your ride do what you want with it but those are my thoughts on it. You could go with bags and just drop it when parked that is cool too but it does add a bit of weight and takes away from the truck space. Good luck with all of the those options all are great wheels truly like all your choices.
I drive way too fast to be dragging my exhaust on the ground. No worries here about me going stance nation. 2 finger wheel gap is as low as I will go and I agree 20"s are too big. I plan on it being a 19" wheel.
Get the Work wheels they're much better and cooler than the other two options. Im fact I've never seen those particular wheels till now. I'm rocking the Work VS-XX now in 19in, still have the Oem Ray's that I want to get powder coated in a Bronze finish.
Motordyne G35 I got the stock ones I’m looking for some rims for my g35 but I can’t find nothing good most of the nice ones are like 2k I don’t know maybe I just paint the ones that I have and save some cash 💰
@@w3r0ification ..right on, all 3 wheels shown in this video, each cost 4k if you are curious without tires. Rim number 2 has a pretty deep concave on it.
None.... but if you want to save the 1st ones are dope... I'm looking right now as well for my g35 07 and I'm thinkin Vossen, Jdm, or some used BMW x6m 2018 rims
Also it's off topic but I'm in, need of guidance you seem to be the guy I can ask, Im bout to purchase my uprev 2 and I already have a 5/16 spacer, I won't to purchase a tower brace to fit without getting any issues, and you can help can you send me a link to purchase one please and thank you
I say # 2 all the way. The first ones look a bit to wide. Too deep for at least my look.# 2 look way sportier for the G35. So I'm with those all the way.
What kind of exhaust do you have on yours? That growl sounds so sexy! Also on the 1st G35 in your video, do you know if he had bags on it with the Work wheels or no?
I don't understand the vid. If you're gonna talk wheels, show wheels. What's with all the other mods? As for the wheels, if you're gonna go black, go all black. Black with chrome rims just looks silly. IMHO of course :) And, I just noticed how old this vid is. Hope you found some good ones!
1st and 3rd. . they got good rotor breathers. on helping to keep em cooler. but ask yourself. are they cleaning friendly. and are you willing to take extra time on doing so. its up to you really. or have a look around in your local Rim ,n, tyres dealer. they,ll have brouchers too. and the internet . pick your own style and put your personality in it. otherwise your copying someone else.[even if you do like em. good idea on changing the cosmetic tho]. But most of all. pick round 5 rims. cross out that's not appealing . on the last 2. put em next to your g35, if possible . make sure you think about the one your willing to pick. TIME is a great one on picking the right one. you,ll be glad you sleep on it. Other opinions help or don,t. But your the one driving the g35. not them
My vote's on the executors. Quick question. About how long did that engine swap with Mo take you. What all did you have to do. My G's engine is done, but I don't want to get rid of it since it's the 6MT sedan.
Motordyne G35 I was going to get rid of it to buy a newer G35 with an HR engine and half the mileage, but the guy started being a dick about it and pretty much tild us to fuck of when we proved to him that he was asking too much for it (rebuilt title and water pump issues). The idea is to do the swap myself with some help. One of my older brother's co-workers said he can hook me up, since he's very well mechanically versed. He's got a few engine swaps under his belt so the learning curve shouldn't be too bad.
I know this is completely off Topic but I know that your G35 is coming to close to 200k Miles. Which is almost to the end of its life span. Do you plan on going Force Inducted or doing an over haul?
Not to brag... OK, a bit: My fully serviced/loaded (sans NAV) '06 Coupe of 11 years is sitting at 61,3XX odo [4K of that was in the last 4 months] is apparently worth $7,000 ish to NADA. Yeah, no.
Ellipsis of Triple Tap well yeah G35’s don’t have the best re sale value but it can easily be sold at 9k if yours is in good condition exterior wise and interior
If the stock RAY rims were the same as my '06 - how the hell did you bend one?! I ran over something about the diameter of a human thigh [but metal] at 70+ mph. The car actually hopped a bit - tire blew [took me a mile to notice, despite my concern, until I smelled the tire caramelizing] but ZERO rim damage...
Definitely the 3 piece work wheels.... if you need any more suggestions go to threepieceus on Instagram (that’s where I bought mine from) or www.fitmentindustries.com to look for some cool/up to date wheels. P.S. I would recommend getting 19 inch or 18 inch wheels with thicker tires (30-40). Im currently running 3 piece WEDS Kranze Borphes 19inch by 10.5 in the rear and 19inch by 9 in the front with a 1 inch spacer all the way around fits perfectly 👌🏾
Off topic but, did your G come with the aero package with the spoiler on the back? If so, how difficult was it to remove and how many holes did you have to fill? Thanks.
Hey, was wondering if you could help me on an issue I'm having with my g35. when initially turning the car on and putting it in first and I drive just a bit the car seems to stop itself , almost like the front brakes are coming on. then VDC off comes on with SLIP on light. I can avoid the stopping motion by just turning vdc off from the start. have any ideas or ran into something similar ? maybe speed sensor or steering angle circuit?
I purchased the Work Durandal DD10.5, uploaded the video here...ruclips.net/video/mdJIOWDzr7g/видео.html
@Tony Saourn …$4k
In my opinion, you should get the work wheels. Love a good stanced look. My G is coming along very nicely but have a lot more to do. Almost bought some work wheels for my first ever wheel but decided not too. Anyways dope G , keep up the great work and love your content.
1 by far bro. I have an 07 g35 w 88k miles. Love it 😍
I own a G35 coupe myself and I would choose the 1st or 3rd set of rims 👍🏾👍🏾👍🏾
Work vs-xx , I got something similar to them on my G and damn it looks good haha
Man this guy made some awesome content! Wish I could get ahold of him somehow. Especially since I have THE Motordyne G35 now….
Executor, they look militant and more race style. They are flashy without being over the top flashy like hey look at me I'm all chromed out.
My choice would be to get the 1st wheels from the beginning of the video.
If you don't like my top 3 picks of wheels, tell me what wheel you think I should get. My top 3 picks are:
1. Work Durandal DD10.5
2. Foose Phoenix - F451 Concave
3. SSR Executor Cv01
Get the work durandel DD
Motordyne G35 Work
Motordyne G35 TE37 Wheels are Nice but that's just my personal preference
Motordyne G35 do you have a email or a phone number I can reach you at to talk to you about your catch can setup?
I kniw most will say Work. But personally when I look for wheels, I'm looking to see how difficult or easy it is to clean them after purchase. I like all of your choices. But the last two, and especially the last one is my fave. It's lose to mine..
The first 2 are good but just too "busy" (too many spokes, too much cleaning and too much of a "bird's nest"). The third set are my preference. Personally, I really like a cone-shaped wheel with a deep lip on the perimeter/edge (no chrome! We both agree on that)...BUT, (again just MY opinion) I prefer less spokes; 5 would be MY preference (blame it on the the Ferrari fan in me?), although 6 or 7 spokes would still look awesome on the right wheel. Did you consider Vossen wheels at all?
I digress; to answer your question: the 3rd set without a doubt! ;-))
For my final 2-cents: I wouldn't go bigger than 19" for daily drivers(?). I know you have 20's; they DO look excellent and are perfect for showing the car, but I suspect you give up some drive-ability? Bad roads, pot holes, fear of bent rims, etc.?
The 2nd ones are so nice I would get does 👌👍
I vouche for work wheels, always been my favorite on g35s
I bought Volk RE30s before they discontinued. Gloss Black to match the car. 19x11 rear and 19x10 front while running pilot supersports. Would like to get another set also in a bronze or gold. 18's most likely to get more tire than the 30 and 35's on the car now.
1st ones
#1 there super clean I think you feel the same way!!!!
I would keep your wheels and refinish them..yours are sweet...
Work 1st pick if not SSR's are my second pick. I don't like the amount of cross patterns the foose wheels have although they're still nice
Mog35's foose wheels are my favorite and i'll be getting those for my build soon, but i think the executor CV01 ssr wheels are more your style, its simple yet aggressive, and would compliment you G really well 👌
#1 hands down, but #3 isn't bad either. #2 isn't appealing imo
I don't follow trends. 1st set is my choice. Always dug polish lip dark center. Foose is a great guy to meet but I don't like his custom style too yuppy.
CV01's in a 19 is what I would go with. Gives you more rubber on the wheel looks good lets you see the calipers and rotors if you upgrade. but if you want to drop it real low then any of those choices are great but please dont stance out your G. If you love the look of the ride cambered out and stanced fine but the G imo was made for proformance and when you stance it out it is all about the looks and looks are relative some people love it some people hate it but is your ride do what you want with it but those are my thoughts on it. You could go with bags and just drop it when parked that is cool too but it does add a bit of weight and takes away from the truck space. Good luck with all of the those options all are great wheels truly like all your choices.
I drive way too fast to be dragging my exhaust on the ground. No worries here about me going stance nation. 2 finger wheel gap is as low as I will go and I agree 20"s are too big. I plan on it being a 19" wheel.
Idk… my 20s get more compliments on my g then any other wheel I’ve ever had! All about preferences! But too big for performance wise, definitely!
Get the Work wheels they're much better and cooler than the other two options.
Im fact I've never seen those particular wheels till now.
I'm rocking the Work VS-XX now in 19in, still have the Oem Ray's that I want to get powder coated in a Bronze finish.
The work VS-XX are very nice and I've always also loved them!
I like the first pair of wheels and the 3rd pair of wheels....
Work durandal look real nice 👌😎
This is crazy I just bought a 2000 lexus gs300 and traded it for 2003 g35 and that's what you have in your drive way....
IM STILL WAITING FOR THE ADMIN TUNNING INTAKE VIDEO
It is still going to happen, sorry for the wait.
Not a big fan of foose wheels, I’d say the first ones are nice but I’d get them in a different size because I’m not about that low life lol
Wouldn't mind putting the first choice on my g.
I have BBS LM you should check those out they look nice on my g35 coupe
I'll buy that ones you have
The SSR's or Weds Kranze LXZ 😊
Rohonna rc series have em on 37s coupe looks sick
I like the conclaves for my g35 I don’t like those rims that everyone been putting on the g34 they look too simple and not new
What wheels do you have?
Motordyne G35 I got the stock ones I’m looking for some rims for my g35 but I can’t find nothing good most of the nice ones are like 2k I don’t know maybe I just paint the ones that I have and save some cash 💰
@@w3r0ification ..right on, all 3 wheels shown in this video, each cost 4k if you are curious without tires. Rim number 2 has a pretty deep concave on it.
Here you go man, check out Klutch KM20's have a concave are in your 1k price range...klutchrepublik.com/blog/klutch-wheels-km20-infiniti-g35/
Get the OEM rays and paint them gold 👀
None.... but if you want to save the 1st ones are dope... I'm looking right now as well for my g35 07 and I'm thinkin Vossen, Jdm, or some used BMW x6m 2018 rims
Also it's off topic but I'm in, need of guidance you seem to be the guy I can ask, Im bout to purchase my uprev 2 and I already have a 5/16 spacer, I won't to purchase a tower brace to fit without getting any issues, and you can help can you send me a link to purchase one please and thank you
I say # 2 all the way. The first ones look a bit to wide. Too deep for at least my look.# 2 look way sportier for the G35. So I'm with those all the way.
What kind of exhaust do you have on yours? That growl sounds so sexy! Also on the 1st G35 in your video, do you know if he had bags on it with the Work wheels or no?
Classic BBS
I say go with the SSR wheels they would be a change in style the first two wheels have a mesh design that still reminds me of your old wheels
It's that step lip that will make it pop though, which I do not have. I do like the SSR CV01!
I don't understand the vid. If you're gonna talk wheels, show wheels. What's with all the other mods? As for the wheels, if you're gonna go black, go all black. Black with chrome rims just looks silly. IMHO of course :) And, I just noticed how old this vid is. Hope you found some good ones!
Werks wheels all day Bro. That lip makes them pop and look sexy and aggressive
Boi, number 1. Also, please lower your car more :)
1st and 3rd. . they got good rotor breathers. on helping to keep em cooler. but ask yourself. are they cleaning friendly. and are you willing to take extra time on doing so. its up to you really. or have a look around in your local Rim ,n, tyres dealer. they,ll have brouchers too. and the internet . pick your own style and put your personality in it. otherwise your copying someone else.[even if you do like em. good idea on changing the cosmetic tho]. But most of all. pick round 5 rims. cross out that's not appealing . on the last 2. put em next to your g35, if possible . make sure you think about the one your willing to pick. TIME is a great one on picking the right one. you,ll be glad you sleep on it. Other opinions help or don,t. But your the one driving the g35. not them
My vote's on the executors. Quick question. About how long did that engine swap with Mo take you. What all did you have to do. My G's engine is done, but I don't want to get rid of it since it's the 6MT sedan.
It took about 3 days. Keep it, an engine install is easy for a professional. It was our first time removing a motor so there was a learning curve.
Motordyne G35 I was going to get rid of it to buy a newer G35 with an HR engine and half the mileage, but the guy started being a dick about it and pretty much tild us to fuck of when we proved to him that he was asking too much for it (rebuilt title and water pump issues). The idea is to do the swap myself with some help. One of my older brother's co-workers said he can hook me up, since he's very well mechanically versed. He's got a few engine swaps under his belt so the learning curve shouldn't be too bad.
TE 37s ⚡
Same color g, but yours is like the cool older brother. Do you have an Instagram?
I know this is completely off Topic but I know that your G35 is coming to close to 200k Miles. Which is almost to the end of its life span. Do you plan on going Force Inducted or doing an over haul?
Fasting Media The way he maintains his G, dude has no worries.
No way with his maintenance, my g is almost at 158k and it fires up right away and no problems at all, I'm sure it'll last way pass 200k
Do regular maintenance and these cars last past 200k easily
Not to brag... OK, a bit: My fully serviced/loaded (sans NAV) '06 Coupe of 11 years is sitting at 61,3XX odo [4K of that was in the last 4 months] is apparently worth $7,000 ish to NADA. Yeah, no.
Ellipsis of Triple Tap well yeah G35’s don’t have the best re sale value but it can easily be sold at 9k if yours is in good condition exterior wise and interior
work duarandal for sures man !
If the stock RAY rims were the same as my '06 - how the hell did you bend one?! I ran over something about the diameter of a human thigh [but metal] at 70+ mph. The car actually hopped a bit - tire blew [took me a mile to notice, despite my concern, until I smelled the tire caramelizing] but ZERO rim damage...
Pothole, I forget the speed. It was so bad I also had to replace the wheel bearing, I was pretty pissed.
Definitely the 3 piece work wheels.... if you need any more suggestions go to threepieceus on Instagram (that’s where I bought mine from) or www.fitmentindustries.com to look for some cool/up to date wheels.
P.S. I would recommend getting 19 inch or 18 inch wheels with thicker tires (30-40). Im currently running 3 piece WEDS Kranze Borphes 19inch by 10.5 in the rear and 19inch by 9 in the front with a 1 inch spacer all the way around fits perfectly 👌🏾
1st wheel forsureeeeeeeeee
Off topic but, did your G come with the aero package with the spoiler on the back? If so, how difficult was it to remove and how many holes did you have to fill? Thanks.
Buy my WORK cr2p’s 19x9.5 +13 19x11 +15
They fit nice o my g coupe but I’m trying to sell them to buy go fast parts
damn....I also do like the work emotions, message me on Insta....instagram.com/motordyne_g35
#1
Build the GS
First pick or get Vossen VWS-1s
Where’d you get the spoiler at! Need one on my g35
I miss my boys christians old G
What kind of bumper & splitter or lip kit do you have?
For the love of god.... can someone tell me what "enjoy the silence" remix this is?
Rays gram lights 57dr
what wheels size should i get for my G ?
Exhaust?
Where did your front lip from
What body kit is that
2:19 what wheels are those?
Can anyone tell me what the second ones are called and their sizes please ?
Hey, was wondering if you could help me on an issue I'm having with my g35. when initially turning the car on and putting it in first and I drive just a bit the car seems to stop itself , almost like the front brakes are coming on. then VDC off comes on with SLIP on light. I can avoid the stopping motion by just turning vdc off from the start. have any ideas or ran into something similar ? maybe speed sensor or steering angle circuit?
x.infinitihelp.com/forum/showthread.php/engine-stall-vdc-and-slip-lights-oni-7915.html?s=06e10b1f8bc9393f024c16e053d89fea&
2:52 where can i get that kind of steering wheel?
LMGT4's 😉
CVO1
18’s or 19’s?
I have 20's so it depends on what you want. I used to have 19's but 18's are best for performance because more rubber on the road vs less rubber.
Ssr
Get the original 19” Ray’s!!
Rotiforms
Hahaha my old g35
I've been a long time fan. Thanks for offering up a better vendor for them.
Motordyne G35 no worries dude. What’s your IG?
instagram.com/motordyne_g35
What Diffuser and front bumper you have?