@@misteriusoxygenhigh no they didn't. The original 4 is old. You're lucky it gets the updates it has already. You should get a GO if you want Bluetooth.
@@villianaire thats bullshit. Thr motherboard is identical as the plus. Only bleutooth chip is older. Buttons are older. But software / hardware identical. So what you say is bullshit. I have my prime 4 2 years now. And now the best advice is to sell my limited edition prime to get a new black back for what? 2.600 euro again.. this is a total rip off
Just tried the Bluetooth functionality at a fundraising event. Paired my phone and it worked seamlessly. Played a couple of tracks from Spotify on my phone and no issues at all. What a great update!! Thank you.
Hello there. So is there a full way to control and mix the way they do it in the video while playing songs via Bluetooth or it’s just for playing songs directly in the controller without any chance to do any mixes?
@@XTREMERACINGMEXICO I tried it last night with my Prime GO, and with Spotify, all you could do was play/pause and skip back and forth, and it wasn’t 100% reliable. I’m curious about the video too… he’s using some app I’m not familiar with…
I can't wait for the final STEMS version on Prime 4 plus. A 4 channel separation (ie vocals, instruments, beats, basslines) would be a game changer and a knock out for the competitors
@@summarity The actual separation is not done on the MPC processor. It's rather done on the computer software, then the final STEMS are transferred to the MPC standalone via cable. It's a move though from InMusic towards the right direction. I hope they keep it up for Denon DJ as well !
the stems on the Prime Series will always have bad quality as the processor is not powerful enough. sad but true. if u want perfect stem quality then you need to use it with Serato.
Thanks for the constant updates for Denon products. I bought my Denon SC Live 4 in June 2023 and I have seen it improving with each update. Good job Denon. I can't wait for the upcoming Bluetooth Out feature. I haven't bought any external speakers yet, so it would be very useful if I can send the sound to my soundbar in the living room. I could enjoy some bass 😊
Good updates, i really love the fact my hardware keeps evolving even after i bought it..... now i am just waiting for the bluetooth audio out ! I hope you can stream to multiple devices at once that would be dope!
Hello Engine team!!! Congratulations on this latest update, you always improve yourself!!! I would like to tell you in passing, that there are many of us who hope in some update to be able to change the waveform of our hardware to RGB etc., I wish it were possible!!! Thank you very much, keep it up!!
I just updated my Denon Prime Go and tried the bluetooth input using my phone, it was amazing. I cant wait till they add the Bluetooth Audio Out feature. That is going to be a game changer for me! Thank You Denon/Engine for always giving us new features (essentials ones instead of gimmicks) on existing hardwares!
@@charleeparkerxo for now the bluetooth is acting in receiving mode. So i can connect to it with a phone and send the sound to Prime and it sends the sound out to the speakers through cables. By bluetooth out, i mean to connect a bluetooth speaker to Prime, and it sends the sounds out to the speaker through bluetooth and not through cables, eliminating the need for cables.
@@quantomize1971 not necesarly.. depends on the receiver. I have a really low latency bluetooth receiver, it would work. And there's always the possiblity to mix in the headphone. I don't see why it shouldn't be implemented.
That's why denon is the best and most innovative...But why not on original prime 4 which i do have for a while and still keep on loving my prime 4 and it was very expensive too... please do needful... now only need bluetooth out and stems on older device and it's the summit... best standalone unit ever... but still sure denon will keep on making it more incredible... thank you all the team... respect... Dj Nasty from Mauritius 🇲🇺💯💯🔥🔥
Well done once again, Engine(ers) guys 🚂 Working nicely on my Live 4. Nice combo with the integrated speakers. On my OG Prime 4 I wouldn't really need it anyway, I just connect a TRS/RCA lead to one of the 4 inputs. All good.
I'm surprised that Denon did not make this available for Prime 4 the original controller that was very expensive. I'm very disappointed. I hope they are able to provide us this capability.
can u PLEASE add a way to scan a folder of songs so they get the BPM and Key. If i don’t have my computer i gotta manually load every track before i mix and it’s annoying. I also feel like the grid synch needs to get improved, almost never works for DNB or any song that’s slightly unique drums. And indie rock
You're so right. I usually mix trance and DnB. The beatgrid for trance works fine as it follows the traditional 4 on the floor structure, but the breakbeat of DnB is wrong 90% of times 😅
Just great, but guys, add just two things to put your controllers out of reach: RGB waveform and analysis of tracks in Tidal and other streaming and that’s it, I don’t need anything else
The waves of the Songs are not showing on mx display, only the music is playing and the Display shows line in at the button instead of Bluetooth. And when is the Stems option Going to be fully available on the Prime 4+? Waiting for it almost one year now.
I am wating (in vain) for something like a DJS-1000 sampler? I haven´t gotten comfortable using the sample feature already built in to my sc6000´s 😞And why not, as a wishlist for the sake of stems a standalone similar to Traktors D2 controller.
thats becouse a lot of people waited for this update for the go powered models except for the bluetooth out , in the higher range equip the most people wouldnt be using this feature often
Is there any chance to connect multiple devices to the bluetooth input? if so, that's the best possible way to pair my turntables and assign them to channels! an absolute game changer for the SC live users!
Can someone explain to me what Bluetooth audio out? Does that mean the device could connect to other devices like my car for example? Cause I neeeeddddd dat
Looking forward to updating it on my Numark Mix Stream pro 🎉🎉🎉🎉... Will the Beatjump ever come to the Numark? Deseando actualizarlo en mi Numark Mix Stream pro 🎉🎉🎉🎉... ¿Algún día llegará el Beatjump a la Numark?
So is there really a way to mix and use all the controller tools while playing songs via Bluetooth or it’s just for us to play the music in the controller?
En el video noté, que toca el pad y mientras presiona, el track se reproduce, deja de presionarlo, el track se detiene. En mi caso, presiono el pad y da función de play! Como hago la configuración como en el video?
PLZ WISHLIST : Add customization for button fx (I want reverse and all other fx) MORE TOUCH FX (they the best) Better way to ply sound fx, still haven’t figured it out in like 8 months
I try first time denon dj prime 4 and engine dj . i dont understand can i use computer mode whit engine dj or not ? i try serato and virtula dj its working but engine dj dosnt work i think .
hi engine dj. I am a user of mixstream pro go in Indonesia. in my country, amazon, tidal. soundcloud go cannot be used. maybe it's better to be able to bluetooth out. and the audio quality is very poor in my opinion in terms of bass. is it because of the software and needs firmware update again? 😢 I hope to hear advice. because in Indonesia there are many mixstream users for live streaming. but I heard that the audio quality is inferior to other brands. hopefully it can be an encouragement for engine dj.
Sooooo, before we all get to excited. Yes it works, seems like it’s a download update not over the air, and I might be missing something but it seems to render the deck useless and just uses play / pause. No effects, no jog controls not even the filter works. Or am I missing something here ?
i think thats coursed on the main technics from bluetooth data . it is just streaming from your device and you can just control your stream device and it didnt has such features like scratching and co . but for that feature you can stream from your engine device
What's incredible is people mixing with vertical waveforms. Not sure how useful this update is. A better horizontal layout for 4 deck mixing would be sweet. Waveforms that don't lag and skip would be sweet. A crossfader that doesn't bleed would be sweet. I'm sure ppl want Bluetooth though since that's what they chose to update
So wait. I have the Mixstream Pro. Are there waveforms, saved cues, loops, beatgrids and so on. And can we get around recording then. Say I Bluetooth my phones beatbort to the decks. Is it the same quality and can I record it. Because if I can with everything I just said then holy hell. If not then mehhh
if you want te record streamed music you must record it on an external drive , becouse all streaming platforms has forbidden the function for direct recording , but it is just an bluetooth stream function from your device like the video sayed it , you only can play and pause and skip and so on like other bluetooth products
Not so fast. That's the official support list for Bluetooth or 3.4 in general. Bought the SC Live 2 three months ago. That would be absolutely fantastic.
@@GrahamPearson-j3iup until this moment i have allways been using the Sirius DI USB/BT device. Battery powered, 3.5mm jack and XLR out, mono/stereo, connects as bluetooth and/or usb sound device for pc, long battery life, decent bluetooth range, low latency, absolutely in love with it, i take it with me everywhere i go. But with this update, this might just change.
@@md20120 I hope not, because sc5000m are great they work perfectly. Sadly, Djay Pro didn't integrate them into their Software, especially for iPads. But it feels like the SC5000 era comes to an end with the newer gear.
It's incredible what they do for their customers. The updates are incredibly valuable. They truly care about the people who buy their products.
only when you have the gear ... i have original prime and they fucked us over !!!!
Facts
@@misteriusoxygenhigh no they didn't. The original 4 is old. You're lucky it gets the updates it has already. You should get a GO if you want Bluetooth.
@@misteriusoxygenhigh I’m with you on this a it’s a fcking disgrace .
@@villianaire thats bullshit. Thr motherboard is identical as the plus. Only bleutooth chip is older. Buttons are older. But software / hardware identical. So what you say is bullshit. I have my prime 4 2 years now. And now the best advice is to sell my limited edition prime to get a new black back for what? 2.600 euro again.. this is a total rip off
This is why I love Denon DJ, giving us new features on existing hardware🎉
Facts! BUT….They KNEW they should’ve enabled this a LONG TIME ago when I needed it 🤕🤕🤕
Just tried the Bluetooth functionality at a fundraising event. Paired my phone and it worked seamlessly. Played a couple of tracks from Spotify on my phone and no issues at all.
What a great update!!
Thank you.
Was there any transport control on the tracks from Spotify?
If loaded to deck 1 or 2 yes there were basic transport controls. When loaded to the main output, you don’t get any options.
Hello there. So is there a full way to control and mix the way they do it in the video while playing songs via Bluetooth or it’s just for playing songs directly in the controller without any chance to do any mixes?
@@XTREMERACINGMEXICO I tried it last night with my Prime GO, and with Spotify, all you could do was play/pause and skip back and forth, and it wasn’t 100% reliable. I’m curious about the video too… he’s using some app I’m not familiar with…
That's awesome, I was wondering if Spotify would work with the Bluetooth update
I can't wait for the final STEMS version on Prime 4 plus. A 4 channel separation (ie vocals, instruments, beats, basslines) would be a game changer and a knock out for the competitors
Shouldn't be too long - it just landed on MPC Standalone (also owned by InMusic), so it's probably being ported right now.
@@summarity The actual separation is not done on the MPC processor. It's rather done on the computer software, then the final STEMS are transferred to the MPC standalone via cable. It's a move though from InMusic towards the right direction. I hope they keep it up for Denon DJ as well !
the stems on the Prime Series will always have bad quality as the processor is not powerful enough. sad but true. if u want perfect stem quality then you need to use it with Serato.
So, all this time the original Numark Mixstream Pro had Bluetooth capabilities? That´s wild!
Thanks for the constant updates for Denon products. I bought my Denon SC Live 4 in June 2023 and I have seen it improving with each update. Good job Denon. I can't wait for the upcoming Bluetooth Out feature. I haven't bought any external speakers yet, so it would be very useful if I can send the sound to my soundbar in the living room. I could enjoy some bass 😊
Good updates, i really love the fact my hardware keeps evolving even after i bought it..... now i am just waiting for the bluetooth audio out ! I hope you can stream to multiple devices at once that would be dope!
That would be so beautiful, I would have tears of joy if I can connect Denon Prime Go to my portable speaker.
Aaaww snap!!! 🙌🏾🕺🕺 so hyped I just purchased the sc live 4 last wk! Just master the stems and you will conquer the standalone category!
Hello Engine team!!! Congratulations on this latest update, you always improve yourself!!! I would like to tell you in passing, that there are many of us who hope in some update to be able to change the waveform of our hardware to RGB etc., I wish it were possible!!! Thank you very much, keep it up!!
I just updated my Denon Prime Go and tried the bluetooth input using my phone, it was amazing. I cant wait till they add the Bluetooth Audio Out feature. That is going to be a game changer for me! Thank You Denon/Engine for always giving us new features (essentials ones instead of gimmicks) on existing hardwares!
What is Bluetooth audio out?
Can't wait for bluetooth sound out. (And stems..) 😁
What do you mean Bluetooth sound out?
@@charleeparkerxo for now the bluetooth is acting in receiving mode. So i can connect to it with a phone and send the sound to Prime and it sends the sound out to the speakers through cables. By bluetooth out, i mean to connect a bluetooth speaker to Prime, and it sends the sounds out to the speaker through bluetooth and not through cables, eliminating the need for cables.
@@efivip93
I don't see it, it's not practical, a lot of latency, you can't DJ
@@quantomize1971 not necesarly.. depends on the receiver. I have a really low latency bluetooth receiver, it would work. And there's always the possiblity to mix in the headphone. I don't see why it shouldn't be implemented.
That's why denon is the best and most innovative...But why not on original prime 4 which i do have for a while and still keep on loving my prime 4 and it was very expensive too... please do needful... now only need bluetooth out and stems on older device and it's the summit... best standalone unit ever... but still sure denon will keep on making it more incredible... thank you all the team... respect... Dj Nasty from Mauritius 🇲🇺💯💯🔥🔥
Well done once again, Engine(ers) guys 🚂
Working nicely on my Live 4. Nice combo with the integrated speakers. On my OG Prime 4 I wouldn't really need it anyway, I just connect a TRS/RCA lead to one of the 4 inputs. All good.
I love Denon for their support and updates, thank you so much 🙏🏿
Keep the updates coming. Nice work!
I'm surprised that Denon did not make this available for Prime 4 the original controller that was very expensive. I'm very disappointed. I hope they are able to provide us this capability.
Maybe the Prime 4 has no Bluetooth Chip
@@revenor101 Oh I see...so no chip means no Bluetooth function. That sucks, but thank you for sharing this info.
@@djstuc Thank you for the info DJstuc. You guys are awesome for sharing this info.
Yes Denon DJ this is amazing stuff; keep it up! Sincerely, your loyal friend DJ A
I updated my Mixstream Pro and Prime 4. I only see the Bluetooth option on the Mixstream Pro. My Prime 4 isn't showing it in the settings.
This is insane! Keep going, keep going!
Well done Denon! Seriously you guys are ON TOP.
can u PLEASE add a way to scan a folder of songs so they get the BPM and Key. If i don’t have my computer i gotta manually load every track before i mix and it’s annoying.
I also feel like the grid synch needs to get improved, almost never works for DNB or any song that’s slightly unique drums. And indie rock
You're so right. I usually mix trance and DnB. The beatgrid for trance works fine as it follows the traditional 4 on the floor structure, but the breakbeat of DnB is wrong 90% of times 😅
very good but where are the STEMS?
Just great, but guys, add just two things to put your controllers out of reach: RGB waveform and analysis of tracks in Tidal and other streaming and that’s it, I don’t need anything else
The waves of the Songs are not showing on mx display, only the music is playing and the Display shows line in at the button instead of Bluetooth.
And when is the Stems option Going to be fully available on the Prime 4+? Waiting for it almost one year now.
Keep the updates coming! 👍👍👍👍👍👍👍
Please allow us to use live stems instead of the slicer on the SC live 4. Please
I hope the feature to connect Denon Prime Go to speakers via Bluetooth will be available, i really love the device!!!
I don't see it, it's not practical, a lot of latency, you can't DJ
@@quantomize1971 you more than likely correct, but its more so for me...I would not use the feature at a venue
I'm still waiting for stems.
I am wating (in vain) for something like a DJS-1000 sampler? I haven´t gotten comfortable using the sample feature already built in to my sc6000´s 😞And why not, as a wishlist for the sake of stems a standalone similar to Traktors D2 controller.
Grandi ragazzi complimenti aggiorno subito 🔥🔥🔥🔥
Love it!! What app is that on the phone?
This is fkn amazing!!!!! That was the only thing I missed in my denon prime GO!!! I LOVE U 👋
I find it strange that EngineDJ - there as Denon use Numark in the demo?
thats becouse a lot of people waited for this update for the go powered models except for the bluetooth out , in the higher range equip the most people wouldnt be using this feature often
agreed, I´ve got a pair of sc6000´s. Think I might put on a chill mix from my phone though while preparing and so@@stevebeats8376
Is there any chance to connect multiple devices to the bluetooth input? if so, that's the best possible way to pair my turntables and assign them to channels! an absolute game changer for the SC live users!
What Bluetooth codecs are supported? Anything low latency like AptX LL?
Can someone explain to me what Bluetooth audio out?
Does that mean the device could connect to other devices like my car for example? Cause I neeeeddddd dat
Exactly! You can send audio from the unit to a speaker that receives Bluetooth
@@bboymac84 no it doesn’t have that capability yet unfortunately. But devices can connect to it and play audio through it
@@charleeparkerxo I know you asked what it means
Excuse me Denon, why doesn't the Prime 4 have Bluetooth?
Engine team busssssyyyyyy 🖤🕺😎 also perfect music for MMW 😂
Include the option to change the wave form to RGB. Thanks,
Looking forward to updating it on my Numark Mix Stream pro 🎉🎉🎉🎉... Will the Beatjump ever come to the Numark?
Deseando actualizarlo en mi Numark Mix Stream pro 🎉🎉🎉🎉... ¿Algún día llegará el Beatjump a la Numark?
Yeah, it's the main reason reason I decided to buy SCLIVE2 instead of Mix Stream
Love the update denon ! But when will we be able to sort out our music on streaming services by bpm and etc
i can use phone bluetooth? im from brazil here i have the mixstream pro go in the engine os 4.2
So is there really a way to mix and use all the controller tools while playing songs via Bluetooth or it’s just for us to play the music in the controller?
Still no beat jump for the mixstream pro go. Please add beat jump!!!
I believe SKAA pro technically is way better for DJing since there is no delay in audio signal
En el video noté, que toca el pad y mientras presiona, el track se reproduce, deja de presionarlo, el track se detiene.
En mi caso, presiono el pad y da función de play!
Como hago la configuración como en el video?
PLZ WISHLIST :
Add customization for button fx (I want reverse and all other fx)
MORE TOUCH FX (they the best)
Better way to ply sound fx, still haven’t figured it out in like 8 months
I whait bluethoot output for speakers and headphones, thanks
I try first time denon dj prime 4 and engine dj . i dont understand can i use computer mode whit engine dj or not ? i try serato and virtula dj its working but engine dj dosnt work i think .
engine on windows/mac is only for preparing the tracks, it is not a player like serato, vdj etc
I’m slightly concerned that my mixstream pro go doesn’t have an update available? Then the video says available now ?
Thank you!!!
Guess I’m going to have to trade in my Mixstream Pro for the go or an sc live 4
All Mixstream units support BT.
What!!!! On snap, I’m going to open mine up and experiment! Thank you!
@@DJBennyswiftyou may have to connect it to pc or put the installer on a usb, i didn't get the update using the web mode
@@skvlldnb9487ah ok, no wonder it didn’t pop up, I’ll get a usb and install. Thank you!
Que app es la que hace conexión directa para controlar la pista ??
Ich finde kein Bluetooth unter Control Center obwohl update schon durch geführt. Bitte helfen.
On it. Thanks folks!
hi engine dj. I am a user of mixstream pro go in Indonesia. in my country, amazon, tidal. soundcloud go cannot be used. maybe it's better to be able to bluetooth out. and the audio quality is very poor in my opinion in terms of bass. is it because of the software and needs firmware update again? 😢 I hope to hear advice. because in Indonesia there are many mixstream users for live streaming. but I heard that the audio quality is inferior to other brands. hopefully it can be an encouragement for engine dj.
can i bluetooth my computer to prime 4 plus
I WISH I COULD USE THE BLUETOOTH FOR BLUETOOTH SPEAKERS 🔊 😕
It’s coming soon
sera que tem esse toturial em portugues brasil
Tre canali ?
Sooooo, before we all get to excited. Yes it works, seems like it’s a download update not over the air, and I might be missing something but it seems to render the deck useless and just uses play / pause. No effects, no jog controls not even the filter works. Or am I missing something here ?
i think thats coursed on the main technics from bluetooth data . it is just streaming from your device and you can just control your stream device and it didnt has such features like scratching and co . but for that feature you can stream from your engine device
I think I understand what you mean
So that means that the controllers became just a speaker? There’s no way to mix and use all the controller tools as they do in the video.
Kind of. it just gives you basic control, however, I am told By @denondj they are possibly working on more control.@@XTREMERACINGMEXICO
what is the name of the phone app?
+1 what is a suggested Android App.
What about Prime 4/2 please tell me that is a misunderstanding....!!! 😮
THX for the update! @@djstuc
Bring stems to the sc6000s
What's incredible is people mixing with vertical waveforms. Not sure how useful this update is. A better horizontal layout for 4 deck mixing would be sweet. Waveforms that don't lag and skip would be sweet. A crossfader that doesn't bleed would be sweet.
I'm sure ppl want Bluetooth though since that's what they chose to update
amazing job denon , i hope next update you add colour coding for music track
So wait. I have the Mixstream Pro. Are there waveforms, saved cues, loops, beatgrids and so on. And can we get around recording then. Say I Bluetooth my phones beatbort to the decks. Is it the same quality and can I record it. Because if I can with everything I just said then holy hell. If not then mehhh
if you want te record streamed music you must record it on an external drive , becouse all streaming platforms has forbidden the function for direct recording , but it is just an bluetooth stream function from your device like the video sayed it , you only can play and pause and skip and so on like other bluetooth products
Am just amazed
Denon DJ Prime 4+
Denon DJ Prime GO
Denon DJ SC6000/SC6000M
Denon DJ SC Live 2/4
Numark Mixstream Pro
Numark Mixstream Pro+
Numark Mixstream Pro Go
Not so fast. That's the official support list for Bluetooth or 3.4 in general. Bought the SC Live 2 three months ago. That would be absolutely fantastic.
Is Bluetooth coming to the Prime 4
Is this available for the prime 4?
No
Is there an external device for the prime 4 for Bluetooth?
@@GrahamPearson-j3iup until this moment i have allways been using the Sirius DI USB/BT device. Battery powered, 3.5mm jack and XLR out, mono/stereo, connects as bluetooth and/or usb sound device for pc, long battery life, decent bluetooth range, low latency, absolutely in love with it, i take it with me everywhere i go. But with this update, this might just change.
Engine DJ on iPad please (macbook is too heavy for cue-adding in toilet)
Hurrayyyyy😮😮
Why diesn't this work for me?
Update your player. Then turn on Bluetooth on your device
What beat is that in the beginning
Where is the BT Output??????
still to come
so now my DJ gear has bluetooth... as if that is something it didn't have but you just never activated it...
@@djstuc So since we have bluetooth now, it would be nice if we can stream to bluetooth speakers as well. makes no sense to make it one way only
Incredible update, unfortunately no waveforms or effects Tho
Pls can you just permit the classification of the song by bpm, key, etc… on SoundCloud !!! Pls pls pls 🙏
I was excited until I realize it won't work with my Prime 4... bommer
not for Prine4 .....thanks....
денон лучшие. сделайте поиск на русском языке прошу.
🤩🤩👌👌
Rip pioneer
Let's record live streamers on Bluetooth
😮😮😮😮😮😮
Still p1ssed off with the Prime 4 not being part of this despite their lukewarm reason . Pretty sure they could’ve sorted this . Poor very poor.
What about prime 4 customers! Very disappointing Denon Dj
Yes WTF!!!! 🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬
And all the sc5000m owners, like myself are fucked 😂🙈 i wish i didnt bought them and waited a year for sc6000m 🙈
Is this a sign SC5000's won't be getting future updates?
@@md20120 I hope not, because sc5000m are great they work perfectly. Sadly, Djay Pro didn't integrate them into their Software, especially for iPads. But it feels like the SC5000 era comes to an end with the newer gear.
@@md20120 no i just think that in this days how they planed the build of the hardware the hardware didnt has planned with bluetooth chip
Thank you for NOT making it available on Prime 4
👎👎👎
is fake. It only serves as a player, the jogs cannot be used, nor does the waveform appear on the screen🤣🤣🤣🤣
Yes they tell you that already