Hi folks. I just updated my BMPCC6K to the new camera update 7.9 using the method shown in this video so I can confirm this method is fully tested and works for the latest firmware (written 12-07-2022)
Hi there, We have BMPCC4k RAW trouble. I bought my BMPCC4K with firmware 6.9.1 and edit in Resolve 15 studio / OSX 10.11 because my old Mac Pros 4,1 and 5,1 don't really run higher versions. BM RAW recorded on SD cards was running fine in Resolve 15. Resolve 14 did not recognise any BM RAW files of BMPCC firmware 6.9.1 I then bought a Samsung T7 usb-c drive to be able to record 3:1 bitrates in raw in the BMPCC4K. In order for BMPCC4K to properly recognize and record on the Samsung T7 drive I had to upgrade the camera firmware to 7.3. Below that 7.3 firmwareversion the T7 would only record low resolutions like a cheap SD card. Now Resolve 15 does not see my raw files anymore although I can play them on the camera. What exactly is going on here and how can I solve the problem? Does the BMPCC4K produce different incompatible BM RAW files with different firmware versions?! On the BM website I could not find anything about any compatibility issues. What would be the ideal software version setup with my Mac Pros 4.1 /5.1 running various OSX systems 8.5 to 10.11? I have a lot of legacy software that I still use, e.g. FCP 7 etc. Concerning BMPCC4K and resolves different versions, what is working with what? Is there a chart or a table outlining that? Possibly I could run OSX 10.12 but even zhat runs only Resolve 16. BMPCC4K firmware 7.3 BM-RAW files are also not recognized there. I am producing high end table top food advertising at the very moment so highest possible image quality is of the essence. Greetings from Berlin Germany
Blackmagic is like the Apple of the camera world. They make it pretty simple to update. Quick too. We have two 6K Pros. We didn't really experience any of the blue tint on the monitors like other people were experiencing but the ability to change the monitor now is awesome. Really really love the histograms now too. Makes it so much easy to see what you're doing. The auto focus was definitely an improvement too. Still have our fingers crossed for continuous auto focus, but we're take what we can get haha
The Apple of the camera word, I hope a U2 album doesn’t end up on my BMPCC 😂 Jokes aside yeah they’ve always made great software and UIs that make for a simple user experience, granted of course you haven’t fallen victim to a bug like speed booster users have with this update!
even though pretty straight forward there were a couple things that your video helped me updating my 6K G2 which I've been meaning to update for a couple months. Good video
There's a fix for the viltrox problem, detatch just the lens from the viltrox with the camera on and put it back, do this a couple of times (Sometimes takes 5 tries) and the iris will apear on the screen and you will be able to control it normally
Thank you. It had been a while since I had done an update on my BMPCC4K and I didn't remember all the steps. Your video was VERY helpful. I appreciate it.
Thanks very much for the note in the description, I had everything ready downloaded and plugged in and then I saw it! I use my speedbooster a lot, I can't risk loosing its functionality and have a shoot tomorrow. Problem avoided, I will wait it out, but keen to try the Gen 5 colour science!
Thanks for letting me know! I no longer own this camera so I will not be updating the title to reflect newer updates as I cannot personally verify that the information in this video still stands.
My BMPCC 6K pro DOES NOT work with my DJI ronin RS2 anymore ... Before the firmware update 7.3 I could control focus on my RS2 and start recording and now I cannot do anything because there’s seem to be a problem with connectivity after new firmware.
Whether or not to update camera FW is no longer an automatic choice. Thanks for the written heads-up on Viltrox/Metabones. As so often happens, it may be months before users of adapted lenses can install the latest BMPCC4K FW without causing lens-control problens. In fact, I'm still waiting on a combination of updates that lets me use the focus-by-touchscreen feature.
Glad you saw it and knew to hold off, lots of people didn’t! It’s strange, from what I’ve seen some people downgrade and that solves it but I just had a comment on a my community post saying that this individual downgraded and it’s still not working 🤷♂️ that makes zero sense to me. Definitely the right call to hold off till it’s solved!
@@FilmResolved - Still holding off on the latest camera FW update until I hear an 'all-clear.' I use EF lenses on a 4K camera with Viltrox adapters (speed booster and 1:1 and down-version FW 2.3 -- anything newer also loses IS control). This combo has worked okay through several camera updates (though touch-screen focusing never works). Obviously, losing iris control over my EF lenses is a show-stopper -- and worse -- this camera/adapter FW compatibility shuffle will never end. As painful as it sounds, I'm thinking about demoting the 4K to my old FD lenses (adapters with opto/mechanical, no electronic, and all manual lenses with actual aperture rings!) and moving my EF lenses to an EF-native 6K camera (no adapters needed). Plainly, this would be a very, very expensive step -- but at least no more worries over EF lens compatibility.
@Alex Ferris I wound up switching to Commlite -- adapter and speedbooster. They both have no FW issues with my Pocket 4K (everything works with all of my EF lenses including auto focus) ... In fact, the Commlites are running FW ver 1.0 and have never needed a FW update since the day they were first released. The same as Viltrox and Metabones, fullframe lenses fit okay with the Commlite speedboster, but most APS-C lenses interfere with the booster lens element (my 17-50 mm f/2.8 APS-C Sigma fits okay, but none of my Canon APS-Cs).
Here because you're having issues updating? Try uninstalling the Camera Setup application THROUGH the installer. This usually fixes stuff like the update not showing up.
I need your help! When iam trying to install the software you shown in the Video, the Installer asks for this: "Camera_Installer_n.nn" If i dont open it the install will fail. Any ideas?
followed all the steps exactly as described - "Black Magic Camera Setup" is not finding the camera. edit: fixed the issue: if you run into the same error - try using a different usb 3 to usb-c type cable
the softwear is not recognising that i have connected the camera to the PC I tried changing cable and also connected it to USB 3.0 (blue) and 3.1 (red) but nothing
Can I update the old 6k bmpcc pro with the new updates?? Right now the last one is the 8.3.1 but in the description says that is for the new one... In that case which one is the latest update for the old 6k bmpcc??
Very helpful, thank you. Just wondering, since you sound Irish, I am in Ireland and thinking about buying a v-mount plate and battery for my BM6k, but almost everywhere on Amazon and other sites say they don't deliver batteries to my location. Could you recommend a site that does?
I just update camera and Davinci. problem Is I can't open new videos which I shoot by camera in my laptop (Mac) now. does someone know what's going on or what to do? Thanks a lot
March 2023: I'm trying to update to the latest firmware, 8.0 on my BMPC6kPro just recently purchased. I started with trying the 7.9.2 update and it said I was already up to date. It says the same thing on the 8.0 update. My firmware version is 7.9.1. I'm confused why it says I don't need the update...
I no longer own the BMPCC6K so this tutorial is no longer being kept up to date so what I'm about to say is unsupported to a degree. The update package (Blackmagic Camera Setup 8.0 as of March 2023) covers many cameras and contains the latest firmware available for each camera it supports. An updated camera setup download may not actually contain a new firmware for a given camera. The BMPCC6KPro latest firmware within this may be a lower number so it might be the case that it is indeed up to date. When googling BMPCC6KPro latest firmware I am not seeing anything beyond 7.9.1 though I am not doing an extensive search.
How can I check which cameras work with the latest updates (for example, the Cinema 2.5 K)? Or will new updates to Blackmagic firmware work with all associated products?
Hello, I did an update of "desktop video windows", it crashed the firmware of my "Decklink Extreme 3D" card, do you have a way to restore the firmware? Thanks in advance
Hola, no reconoce la última actualización 7.7.3 del 23 de Marzo, se queda en la que tenía 7.5.1....que raro, y le he quitado el objetivo. Gracias, me he suscrito.
curious as to your thoughts on the recent implementation of the internal gyro and davinci beta stabilization. im currently in the middle of a project and cant install the beta but im hearing great things about it. seen a few examples and just wow.. hope your weekend is awesome
Sorry for the slow reply. I wanted to try this out for myself rather than rehash someone elses POV from watching their video. In short I think overall its great that BMD have made this update. Certainly no complaints about free helpful features. My thoughts on the actual performance are that I don't think the results are quite as stable as something like say the perspective satablizer already available however, you also get far less jelly artifacts using gyro vs perspective/similarity/translation so for me as someone who cannot stand adding problems to the footage in an attempt to fix other problems, I personally would rather the clip be quite stableized and no weird artifacts are added than to have super stable and lots of artifacts. So overall Im impressed and happy with it. What are your thoughts?
@@FilmResolved hey there thanks for the reply. funny because as usual I dove right in and took the risk ha ha. I was mentioning earlier to someone that I wasnt aware we were supposed to enter the lens data before the shoot. The BRAW file writes the metadata and also I wasnt supposed to use lens optical stabilizers. so once I dialed all that in I was very impressed. not perfect but much better than the software for sure. just as usual will crop in the more it shakes. its actually quite a straightforward plan. the most you shake the more you lose. I tried to same run n gun handheld stuff and with a fast shutter I was pleasantly surprised at how well it worked without jiggle artifacts. I mean rolling shutter still there but you know
Hi If you have time, could you please expand on your comment (or even post a link) that people have been experiencing iris issues with their metabones adapters with this new update. I have a BMPCC4K and literally just purchased a Metabones Speedbooster XL 0.64 so would like to know a little more before updating. Cheers & much appreciated
Not much more to say. I added that to the notes as there are quite a few comments on this video from viewers stating this issue. My guess is that the part of the update that “improved” autofocus has cause compatibility issues with lens adapters and its manifested in the form a loss of iris control. Just wait for issue to addressed before updating and use the adapter I say.
Hello, I need your help. I have problems with the iris using Nikon lenses. I have the Metabones Speed Booster Ultra 0.71x adapter for Nikon G, and without having updated the iris, it does not work. I use the lenses of my Nikon D850 camera but trying with all the lenses the iris does not work on my BMPCC 4k. Could you help me please.
The only information I can offer is to see if there is an update for the adapter with metabones. The performance of an adapter is the responsibility on the adapters manufacturer.
Great video! Updating the camera done in no time :) Question: does anybody know what the red tag is called that you see attached on the left side of the camera, on 03.54 for example? I see it on a lot of filmmakers camera's, what is it for? Is it just a luggage tag?
That’s a clip mechanism from a company called Peak Design. They’re shoulder and wrist straps and are really quick to attach and detach. You buy one shoulder strap and a few spare connectors and put them on all you cameras so it’s quick and easy to swap out 👍
So I followed along with everything you show in this tutorial. Windows 10. When I open the installed "Blackmagic Camera app" it doesnt do anything. The tab is in the taskbar which indicates that it is opened but when I click it nothing happens. When I hover my mouse over the top of the app in the taskbar a little blank white screen is shown. Any Suggestions?
That sounds like the app didn't install correctly. I would perform a clean install and I would run the installer as an administrator while doing so. Also a reboot after installing is always a good idea.
I need you to tell me exactly how you went about this because to turn your camera on during an update suggests that you also turned it off during the update which is the best way to brick your camera. This video does not tell you to turn it on during an update. It very clearly shows that you turn it on, then software detects the camera and the latest update for that camera and then you start the update with the camera REMAINING on. So let’s get this much cleared up.
Sorry. At no point when creating this video did I think I would need to do a slowed down detailed run through of how to open a program seen as that’s just computer basics. P.S. RUclips has a playback speed option.
Honestly, it’s something I’ve never taken notice of 😂 but now that I think about it, I think it’s only showing that because I am plugged into mains power so it’s showing percentage because of that. That’s just a guess though. I’m always rigged up with a 155Wh v-lock battery so I never look at the battery indicator.
I have not had a chance to update, but some guys saying they can no longer change the iris in their cameras.. I shoot with Canon Lens and would be screwed if I cannot change the iris... Anybody else have this problem? EDIT*** Apparently it is a problem with Viltrox thank gosh..
From what I have seen the people having iris issues are people using viltrox speedboosters. But if in doubt what a while and see what issues present themselves. If you can’t afford these issues don’t be the Guinea Pig.
My guess is all the adapter/speedbooster issues people are experiencing (and now lenses too, your the first case I’ve personally heard) is as a result of the update to the auto focus. Seems to be causing upset to the communication with some adapters and lens. You’ll have to downgrade the firmware and sit this one out until the issues have been addressed I’m afraid.
Google "downgrade bmpcc firmware". The first hit should be a discussion on the BMD forums. Read it fully befor attempting but it's meant to be as simple as removing the current software from your system and installing the older one you desire and following the same precedure.
Switch the power button on the camera to OFF and unplug the power adaptor - Connect the camera to the computer using a USB-C data cable. - Start Camera Setup software on your computer. - Connect the power cable to the camera (DO NOT power ON). - Press and hold the Auto focus button on the camera and switch the power switch to ON, and wait until you see the Camera Setup on the computer detecting your camera, prompting Software update available. - Click on "Update Now" to start the firmware update again.
I looking, looking, looking,,Finally you , great Information, BMPCC4K, for all, my cameras 12v pins misaligned. I can not plug in power…How can I up date software? If you know? Can not afford big send away, professional Tec repair…Happy holidays…( I do not know how you feel about the Len e situation. This my first experience with cinematography/ photography.. I got lost watching the lense possibilities, the camera builds.. When I just have tried to learn how to operate the camera..I gave up. Last week got mbp, figuer I give new try.. Support kind enough to tell me I can down load free resolve..( luckily I know what I bought. Had all receipts. Had registered.. So they sent me link for resolve studio..Ah, the activation code…that’s the rub…but yes, below the flap of the box was the card. Successful studio, 17. Now update camera..pins like bent off set.. BUMMER. if you have workaround. If you could be so kind….Do you have classes? Happy Holidays…
I get the stripping it down to bare bone before performing the update, but I hope the atrocious battery of the BMPCC will stay enough to allow the firmware update to complete? I have never seen a more useless batteries like the ones in these BM beauties. It's almost sinful!
oh, I think at 2:00 you did mention to use the mains charger to keep the camera powered on, so I wonder why you mentioned also to strip the camera of every accessory except the battery.?
Electric accessories such as a smart lens adapter can cause the update to fail. Keeping a battery in is just a fail safe. If there is a power trip in your property your battery will keep your camera powered on and buy you some time to figure out a solution.
@@FilmResolved Yes sir Metabones ultra 0,71 no iris values and i update recently to 3.60 ... still got the problem this is frustrating for canon user i can't use my sigma 18-35 like before
Hi folks. I just updated my BMPCC6K to the new camera update 7.9 using the method shown in this video so I can confirm this method is fully tested and works for the latest firmware (written 12-07-2022)
Hi there,
We have BMPCC4k RAW trouble.
I bought my BMPCC4K with firmware 6.9.1 and edit in Resolve 15 studio / OSX 10.11 because my old Mac Pros 4,1 and 5,1 don't really run higher versions.
BM RAW recorded on SD cards was running fine in Resolve 15.
Resolve 14 did not recognise any BM RAW files of BMPCC firmware 6.9.1
I then bought a Samsung T7 usb-c drive to be able to record 3:1 bitrates in raw in the BMPCC4K.
In order for BMPCC4K to properly recognize and record on the Samsung T7 drive I had to upgrade the camera firmware to 7.3.
Below that 7.3 firmwareversion the T7 would only record low resolutions like a cheap SD card.
Now Resolve 15 does not see my raw files anymore although I can play them on the camera.
What exactly is going on here and how can I solve the problem? Does the BMPCC4K produce different incompatible BM RAW files with different firmware versions?!
On the BM website I could not find anything about any compatibility issues.
What would be the ideal software version setup with my Mac Pros 4.1 /5.1 running various OSX systems 8.5 to 10.11?
I have a lot of legacy software that I still use, e.g. FCP 7 etc. Concerning BMPCC4K and resolves different versions, what is working with what? Is there a chart or a table outlining that?
Possibly I could run OSX 10.12 but even zhat runs only Resolve 16. BMPCC4K firmware 7.3 BM-RAW files are also not recognized there.
I am producing high end table top food advertising at the very moment so highest possible image quality is of the essence.
Greetings from Berlin Germany
doesn't work!
Blackmagic is like the Apple of the camera world. They make it pretty simple to update. Quick too. We have two 6K Pros. We didn't really experience any of the blue tint on the monitors like other people were experiencing but the ability to change the monitor now is awesome. Really really love the histograms now too. Makes it so much easy to see what you're doing. The auto focus was definitely an improvement too. Still have our fingers crossed for continuous auto focus, but we're take what we can get haha
The Apple of the camera word, I hope a U2 album doesn’t end up on my BMPCC 😂
Jokes aside yeah they’ve always made great software and UIs that make for a simple user experience, granted of course you haven’t fallen victim to a bug like speed booster users have with this update!
Not really, that is the Leica.
they make it impossible. Do you guys work for Blackmagic or something? It's never updated for me
@@matthewbeard7225 it's actually pretty straight forward. We do find they update easier on Mac
even though pretty straight forward there were a couple things that your video helped me updating my 6K G2 which I've been meaning to update for a couple months. Good video
Really helpful tutorial, First time doing firmware updates in any of my cameras since 2019
There's a fix for the viltrox problem, detatch just the lens from the viltrox with the camera on and put it back, do this a couple of times (Sometimes takes 5 tries) and the iris will apear on the screen and you will be able to control it normally
thank you for this!!
Thanks! Worked here
I can confirm iris control DOES WORK just fine with my Metabones .64 on the Pocket 4K ... used a Canon 16-35 2.8 if that matters.
Yet again, I find myself getting the best answers on your channel. Keep it up legend.
Thank you!
Thank you. It had been a while since I had done an update on my BMPCC4K and I didn't remember all the steps. Your video was VERY helpful. I appreciate it.
Glad to hear it! You’re very welcome
Perfect, straightforward, and to the point. Much appreciated.
Thank you for taking the time to show this...EXCELLENT !
Glad you enjoyed it!
Thanks very much for the note in the description, I had everything ready downloaded and plugged in and then I saw it!
I use my speedbooster a lot, I can't risk loosing its functionality and have a shoot tomorrow.
Problem avoided, I will wait it out, but keen to try the Gen 5 colour science!
Thanks for the tutorial, boss.
Great and informative video! This made it super easy! Much appreciated!!!
You're super welcome! :)
Just what I was looking for, thanks!
Just installed the update! Thanks for the walkthrough. Cheers
You’re very welcome! Hope everything is going smoothly 👍
Thank you so much for this. There's an 8.0 update now.
Thanks for letting me know! I no longer own this camera so I will not be updating the title to reflect newer updates as I cannot personally verify that the information in this video still stands.
Thank you so much boss this was really helpful
Super helpful. Super cool. Thank you!
Great video, thanks for sharing 🙌
Thanks for watching!
My BMPCC 6K pro DOES NOT work with my DJI ronin RS2 anymore ... Before the firmware update 7.3 I could control focus on my RS2 and start recording and now I cannot do anything because there’s seem to be a problem with connectivity after new firmware.
how do you fix the audio lag with in post or in camera
Whether or not to update camera FW is no longer an automatic choice. Thanks for the written heads-up on Viltrox/Metabones. As so often happens, it may be months before users of adapted lenses can install the latest BMPCC4K FW without causing lens-control problens. In fact, I'm still waiting on a combination of updates that lets me use the focus-by-touchscreen feature.
Glad you saw it and knew to hold off, lots of people didn’t! It’s strange, from what I’ve seen some people downgrade and that solves it but I just had a comment on a my community post saying that this individual downgraded and it’s still not working 🤷♂️ that makes zero sense to me. Definitely the right call to hold off till it’s solved!
@@FilmResolved - Still holding off on the latest camera FW update until I hear an 'all-clear.' I use EF lenses on a 4K camera with Viltrox adapters (speed booster and 1:1 and down-version FW 2.3 -- anything newer also loses IS control). This combo has worked okay through several camera updates (though touch-screen focusing never works). Obviously, losing iris control over my EF lenses is a show-stopper -- and worse -- this camera/adapter FW compatibility shuffle will never end. As painful as it sounds, I'm thinking about demoting the 4K to my old FD lenses (adapters with opto/mechanical, no electronic, and all manual lenses with actual aperture rings!) and moving my EF lenses to an EF-native 6K camera (no adapters needed). Plainly, this would be a very, very expensive step -- but at least no more worries over EF lens compatibility.
@Alex Ferris I wound up switching to Commlite -- adapter and speedbooster. They both have no FW issues with my Pocket 4K (everything works with all of my EF lenses including auto focus) ... In fact, the Commlites are running FW ver 1.0 and have never needed a FW update since the day they were first released. The same as Viltrox and Metabones, fullframe lenses fit okay with the Commlite speedboster, but most APS-C lenses interfere with the booster lens element (my 17-50 mm f/2.8 APS-C Sigma fits okay, but none of my Canon APS-Cs).
Thanks for this. Great - to the point - gets the job done :-D Much appreciated!
thanks. great job. just did an update on my bmpcc4k
Here because you're having issues updating?
Try uninstalling the Camera Setup application THROUGH the installer. This usually fixes stuff like the update not showing up.
My problem is, I can‘t use my dji rs2 gimbal anymore with that update. There is no connection to the bmpcc 4k 😩
I need your help!
When iam trying to install the software you shown in the Video, the Installer asks for this: "Camera_Installer_n.nn"
If i dont open it the install will fail. Any ideas?
followed all the steps exactly as described - "Black Magic Camera Setup" is not finding the camera.
edit: fixed the issue: if you run into the same error - try using a different usb 3 to usb-c type cable
thanks! helped a lot!!
So useful video, thank you so much for sharing the knowledge
Happy to hear it’s been useful 😊
Thank you. You really helped me
Hey man do you have an idea as to why my computer isn’t recognizing the camera once I plug it in to update?
It won't open the black window that says my camera is not on
Thank you
GREAT!! THANKS!!
Thank you for this video.
My black magic 6k the screen come black forever.. not appear... I m at trouble
Thanks great tutorial.
Thanks for helping out! Should I also format my SD and SSD cards after updating the firmware?
Is there a way to update lens firmware from bmpcc 4k? I use the 12-28mm
Thank you! One thing, I had to plug directly into my computer, and not through my hub
Thanks for the additional info, it’s great to know 👍
YEAH THAT WAS GREAT!!
My touch screen isn’t working properly any help sir
the softwear is not recognising that i have connected the camera to the PC I tried changing cable and also connected it to USB 3.0 (blue) and 3.1 (red) but nothing
Can I update the old 6k bmpcc pro with the new updates?? Right now the last one is the 8.3.1 but in the description says that is for the new one... In that case which one is the latest update for the old 6k bmpcc??
Your instructions don't work for me...i down load the update but after that, i plug in my bmk it doesn't see the camera. I give up
thank you sir!
the 7. 9 update bricked my 4K. Everything was connected. Any suggestions? I am desperate
Very helpful, thank you. Just wondering, since you sound Irish, I am in Ireland and thinking about buying a v-mount plate and battery for my BM6k, but almost everywhere on Amazon and other sites say they don't deliver batteries to my location. Could you recommend a site that does?
I use address pal with An Post as a work around
Is it possible to do it with a memory card my usb is broken on my pocket
I just update camera and Davinci. problem Is I can't open new videos which I shoot by camera in my laptop (Mac) now. does someone know what's going on or what to do? Thanks a lot
So what software do I need installed in my PC?
4:54 Please tell me how you 4k DCI works in RAW??? I have ony 5.7 .2.8. 3.7 and 6k 4k is not active! what wrong?
March 2023: I'm trying to update to the latest firmware, 8.0 on my BMPC6kPro just recently purchased. I started with trying the 7.9.2 update and it said I was already up to date. It says the same thing on the 8.0 update. My firmware version is 7.9.1. I'm confused why it says I don't need the update...
I no longer own the BMPCC6K so this tutorial is no longer being kept up to date so what I'm about to say is unsupported to a degree. The update package (Blackmagic Camera Setup 8.0 as of March 2023) covers many cameras and contains the latest firmware available for each camera it supports. An updated camera setup download may not actually contain a new firmware for a given camera. The BMPCC6KPro latest firmware within this may be a lower number so it might be the case that it is indeed up to date. When googling BMPCC6KPro latest firmware I am not seeing anything beyond 7.9.1 though I am not doing an extensive search.
Thanks!!!!!!!!
two words : thank you.
Two more words: you’re welcome 👍
thanks
How can I check which cameras work with the latest updates (for example, the Cinema 2.5 K)? Or will new updates to Blackmagic firmware work with all associated products?
i just updated mines and my IRIS disappeared now. how can i fix that ?
See description notes...
Hello,
I did an update of "desktop video windows", it crashed the firmware of my "Decklink Extreme 3D" card, do you have a way to restore the firmware?
Thanks in advance
do you know how to reinstall 6.9.6?
What is the cable I need to use to connect my bmpcc 6k pro to my computer?
Thanks dude
Thanks full !!
Helpful af
Hi, can you do this update whilst powering the camera via a vmount battery?
wayyyyyyy to helpfullllll thanks
Good Vid :)
is is possible to uninstall the update?
Hola, no reconoce la última actualización 7.7.3 del 23 de Marzo, se queda en la que tenía 7.5.1....que raro, y le he quitado el objetivo.
Gracias, me he suscrito.
curious as to your thoughts on the recent implementation of the internal gyro and davinci beta stabilization. im currently in the middle of a project and cant install the beta but im hearing great things about it. seen a few examples and just wow.. hope your weekend is awesome
Sorry for the slow reply. I wanted to try this out for myself rather than rehash someone elses POV from watching their video.
In short I think overall its great that BMD have made this update. Certainly no complaints about free helpful features.
My thoughts on the actual performance are that I don't think the results are quite as stable as something like say the perspective satablizer already available however, you also get far less jelly artifacts using gyro vs perspective/similarity/translation so for me as someone who cannot stand adding problems to the footage in an attempt to fix other problems, I personally would rather the clip be quite stableized and no weird artifacts are added than to have super stable and lots of artifacts. So overall Im impressed and happy with it. What are your thoughts?
@@FilmResolved hey there thanks for the reply. funny because as usual I dove right in and took the risk ha ha. I was mentioning earlier to someone that I wasnt aware we were supposed to enter the lens data before the shoot. The BRAW file writes the metadata and also I wasnt supposed to use lens optical stabilizers. so once I dialed all that in I was very impressed. not perfect but much better than the software for sure. just as usual will crop in the more it shakes. its actually quite a straightforward plan. the most you shake the more you lose. I tried to same run n gun handheld stuff and with a fast shutter I was pleasantly surprised at how well it worked without jiggle artifacts. I mean rolling shutter still there but you know
Hi can you help me, my BMPCC c port is broken, can I use HDMI to type C port to update my BMPCC? thank you
No you can’t I’m afraid.
@@FilmResolved thank you
is it possible to downgrade BMPCC 4k? I have a viltrox adapter and, sadly, it is not working anymore.
Was about to update until I saw this I’ll pass now
Yes. Just pick a different upgrade version and do the same exact steps using the lower firmware. My "Iris" control was missing after this 7.3 update.
Hi If you have time, could you please expand on your comment (or even post a link) that people have been experiencing iris issues with their metabones adapters with this new update. I have a BMPCC4K and literally just purchased a Metabones Speedbooster XL 0.64 so would like to know a little more before updating. Cheers & much appreciated
Not much more to say. I added that to the notes as there are quite a few comments on this video from viewers stating this issue. My guess is that the part of the update that “improved” autofocus has cause compatibility issues with lens adapters and its manifested in the form a loss of iris control. Just wait for issue to addressed before updating and use the adapter I say.
how the hell do I downgrade the camera?
Hello, I need your help. I have problems with the iris using Nikon lenses. I have the Metabones Speed Booster Ultra 0.71x adapter for Nikon G, and without having updated the iris, it does not work. I use the lenses of my Nikon D850 camera but trying with all the lenses the iris does not work on my BMPCC 4k. Could you help me please.
The only information I can offer is to see if there is an update for the adapter with metabones. The performance of an adapter is the responsibility on the adapters manufacturer.
Great video! Updating the camera done in no time :) Question: does anybody know what the red tag is called that you see attached on the left side of the camera, on 03.54 for example? I see it on a lot of filmmakers camera's, what is it for? Is it just a luggage tag?
That’s a clip mechanism from a company called Peak Design. They’re shoulder and wrist straps and are really quick to attach and detach. You buy one shoulder strap and a few spare connectors and put them on all you cameras so it’s quick and easy to swap out 👍
So I followed along with everything you show in this tutorial. Windows 10. When I open the installed "Blackmagic Camera app" it doesnt do anything. The tab is in the taskbar which indicates that it is opened but when I click it nothing happens. When I hover my mouse over the top of the app in the taskbar a little blank white screen is shown. Any Suggestions?
That sounds like the app didn't install correctly. I would perform a clean install and I would run the installer as an administrator while doing so. Also a reboot after installing is always a good idea.
Does the camera crop in when filming in 4K DCI RAW or does the camera downscale the 6K image from the full sensor readout?
It crops. That’s the nature of RAW.
I left my camera on because you said to turn it on when updating and now it won’t come on
Blackmagic pocket 6k
I need you to tell me exactly how you went about this because to turn your camera on during an update suggests that you also turned it off during the update which is the best way to brick your camera. This video does not tell you to turn it on during an update. It very clearly shows that you turn it on, then software detects the camera and the latest update for that camera and then you start the update with the camera REMAINING on. So let’s get this much cleared up.
Since this is a how to video. How about at 3:45 you slow the f down so we can see what you're clicking?
Sorry. At no point when creating this video did I think I would need to do a slowed down detailed run through of how to open a program seen as that’s just computer basics.
P.S. RUclips has a playback speed option.
@@FilmResolved Well now you do : )
Don't get me wrong. The fact you post these is awesome, but for someone like me trying to keep up following the arrow buzzing around gets tricky.
спасибо!
Do not update your camera on 8.6. Problem with panoramic video. Sticks.
Mine still says "no camera or accessory found"??
Mostly likely culprit is a faulty or incompatible cable.
@@FilmResolved yeah I tried a new cable and it worked
Hey ! How did you manage to view the PERCENTAGE of the battery life ? Btw, your video was pretty useful, thanks :)
Honestly, it’s something I’ve never taken notice of 😂 but now that I think about it, I think it’s only showing that because I am plugged into mains power so it’s showing percentage because of that. That’s just a guess though. I’m always rigged up with a 155Wh v-lock battery so I never look at the battery indicator.
If you haven't figure this out yet, just tap the battery icon. It changes between voltage and percent
Ive lost my main power supply. Can i use my vmount power supply to do the update?
I have not had a chance to update, but some guys saying they can no longer change the iris in their cameras.. I shoot with Canon Lens and would be screwed if I cannot change the iris... Anybody else have this problem?
EDIT*** Apparently it is a problem with Viltrox thank gosh..
From what I have seen the people having iris issues are people using viltrox speedboosters. But if in doubt what a while and see what issues present themselves. If you can’t afford these issues don’t be the Guinea Pig.
@@FilmResolved Yes, sorry, just read that but might be good for people to know who have a Viltrox.. Thanks!!
@@ekphotography Agreed, I added a note to the description as soon as I caught wind of it.
Yup not only Viltrox i have the same problem with my metabones Ultra 0,71 No More iris values .
@@lb-video Oh shit, that is not good.. That is why I eventually went with the P6K, I was sick of adaptors...
Hey. Can you use the power adapter and the battery in the same time while you update? to be sore there is no power cut off.
Yes you can 👍
@@FilmResolved how about a vmount power supply?
thank u
You bet 👍
Hey, what cable do you use for transfering files from pc?
Here I used the usb type a to usb-c cable that comes with the Samsung T5 drive.
Does the firmware update fix any unresponsive touch screen issues? My touch screen seems to be a little finicky, not always responding to touch.
I haven’t heard of that before I’m afraid.
@@FilmResolved can you access the camera settings from the PC app?
Hi, I updated the firmware of my BMPCC4K and i found that my lumix G Vario 45-200 on the BMPCC4k no longer works. What happened?
My guess is all the adapter/speedbooster issues people are experiencing (and now lenses too, your the first case I’ve personally heard) is as a result of the update to the auto focus. Seems to be causing upset to the communication with some adapters and lens. You’ll have to downgrade the firmware and sit this one out until the issues have been addressed I’m afraid.
Thank you for the replay. How can I do to downgrade the firmware to the previous v. ?
Google "downgrade bmpcc firmware". The first hit should be a discussion on the BMD forums. Read it fully befor attempting but it's meant to be as simple as removing the current software from your system and installing the older one you desire and following the same precedure.
OK, thank you.
You’re the guy
❤️
can you redo this video and explain it like I'm 5 please
Most nerve wrecking time of my life updating an expensive camera a day before production
Switch the power button on the camera to OFF and unplug the power adaptor
- Connect the camera to the computer using a USB-C data cable.
- Start Camera Setup software on your computer.
- Connect the power cable to the camera (DO NOT power ON).
- Press and hold the Auto focus button on the camera and switch the power switch to ON, and wait until you see the Camera Setup on the computer detecting your camera, prompting Software update available.
- Click on "Update Now" to start the firmware update again.
I looking, looking, looking,,Finally you , great Information, BMPCC4K, for all, my cameras 12v pins misaligned. I can not plug in power…How can I up date software? If you know? Can not afford big send away, professional Tec repair…Happy holidays…( I do not know how you feel about the Len e situation. This my first experience with cinematography/ photography.. I got lost watching the lense possibilities, the camera builds.. When I just have tried to learn how to operate the camera..I gave up. Last week got mbp, figuer I give new try.. Support kind enough to tell me I can down load free resolve..( luckily I know what I bought. Had all receipts. Had registered.. So they sent me link for resolve studio..Ah, the activation code…that’s the rub…but yes, below the flap of the box was the card. Successful studio, 17. Now update camera..pins like bent off set.. BUMMER. if you have workaround. If you could be so kind….Do you have classes? Happy Holidays…
I get the stripping it down to bare bone before performing the update, but I hope the atrocious battery of the BMPCC will stay enough to allow the firmware update to complete? I have never seen a more useless batteries like the ones in these BM beauties. It's almost sinful!
oh, I think at 2:00 you did mention to use the mains charger to keep the camera powered on, so I wonder why you mentioned also to strip the camera of every accessory except the battery.?
Electric accessories such as a smart lens adapter can cause the update to fail. Keeping a battery in is just a fail safe. If there is a power trip in your property your battery will keep your camera powered on and buy you some time to figure out a solution.
@@FilmResolved makes complete sense! Thanks
viltrox needs to update their firmware as my speedbooster is not working anymore hahaha
Aw dang, that sucks! Is it totally not working, aperture and all? 😭
@@FilmResolved Same here! Aperture is not working, just flashes "Sutter 1.2" and then disapears
I wonder if Metabones users are having problems 🧐
@@FilmResolved Yes sir Metabones ultra 0,71 no iris values and i update recently to 3.60 ... still got the problem this is frustrating for canon user i can't use my sigma 18-35 like before
Good to know, I’ll add that to my description notes ASAP.
Мир
None of the the footage I recorded with the new 7.3 update works in Davinci Resolve 16? WTF!!!!!
Only resolve 16.3.2 beta and 17 onward are compatible with Gen 5 color science so my guess is that you’re using too old a version of resolve.