How To Fix F150 Backup Camera. Common Problems & DIY Fixes.
HTML-код
- Опубликовано: 1 июн 2024
- How To Fix Your F150 Backup Camera. Check These Common Problems First. It Might Not Be The Camera.
#f150
#ford
#mechanics
#diy
Do you have a Ford F150 and when you put it in reverse the only thing that comes up on your display is "Camera Is Unavailable Please Contact Your Dealership" The problem may not be a faulty back up camera. In this video I show you common problems and failure points and what to look for. Hopefully by watching this video, I help you fix your own backup camera and save money. What are these common problems? Watch and find out.
Thank You for your support and Thanks for watching!
If you are unsure of what you are trying to diagnose or repair, please contact a qualified mechanic. There is nothing wrong with asking for help.
Please remember to hammer that like button (thumbs up) and torque that red "subscribe" button.
All opinions and reviews are my own, and I am not being paid by Snap On , Milwaukee Tools or any other tool companies. You will receive an honest opinion from a professional mechanic, with twenty plus years experience who uses the tools daily. Snap on and Milwaukee tools are for use in the transportation industry including: automotive, commercial transport, heavy duty, marine, aviation and railway industries.
***If you enjoyed this video or it was helpful, please remember to hammer that “thumbs up” button. It would be greatly appreciated if you could also press the red “subscribe” button to support my new channel. New videos posted weekly.
In the comments below…also feel free to let me know what you think, or if there are any tools you would like me to review, would like more information on, or any repairs you would like to see.
Please subscribe to:
-Facebook: / shaners.mechaniclive
-Instagram: / shaners.mechanic.life
-RUclips Channel: / @shanersmechaniclife3164
Disclaimer:
Due to the factors beyond the control of “Shaners Mechanic Life,” I cannot guarantee against improper use or unauthorized modifications of this information. “Shaners Mechanic Life” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Shaners Mechanic Life” recommends safe practices when working on vehicles and/or with tools seen or implied in this video. Due to the factors beyond the control of “Shaners Mechanic Life,” no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, property damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not "Shaners Mechanic Life."
The information and/or advice given in this video is no replacement for the services and knowledge of a qualified, certified mechanic, when in doubt of what to do seek a qualified professional. 
Авто/Мото
U said it , saving a ton of money. Thanks for the video; very informative!👍
Glad you liked it. Hope you find and fix your problem cheap. Thanks for watching and commenting.
Work like a charm, thank you
You're very welcome. Glad my video was able to help you. Thanks for watching.
Brilliant!
Thank you very much for the great comment and for watching.
I subscribed to your channel about a week ago and was an instant fan of yours! Your 3-minute video on how to put the vehicle in maintenance mode was used to educate 2 mechanics and their managers at A1-Auto after they broke my rear caliper trying to put it back on after changing my rear rotors and pads!
Thanks for watching, commenting, and subscribing. I try to make videos to help everyone from professionals to do it yourselfers.
Mine comes on and off sometimes but will check step by step thanks
Did you get your backup camera figured out? Hopefully it was a cheap fix. Let me know what you find. Thanks for watching and commenting.
K@@shanersmechaniclife3164
I cannot get the connector back together?? The male pins look perfectly straight but the connector seems to stop about an 1/8th inch too short when trying to click it in place. Any ideas why? I cleaned it out with electrical spray too
Did you get your connector back together? Sometimes the rubber seal comes out of place and gets stuck. Hope it works for you. Thanks for watching.
Has anyone tried to reload the newest version of Sync onto their systems to fix the camera issue? I too have this issue; reloaded the most current sync software; and now it happens less often. (Camera not Available). Wiring is good, connectors are good, camera is good. The only thing not replaced is the APIM.
I have 2012 that the camera isn't working, it was working before I dropped the headliner to change it and reinstalled the headliner and it hasn't worked since. Tried everything in this video and I get nothing lol. Connection at the mirror (the screen is in my mirror) at the camera, the harness under it I feel like the process of elimination leads to camera. Weird thing is I'm not getting nothing on the screen no warning go to dealer sign or anything no blue screen either. Any ideas?
Unfortunately, if it was okay before you dropped the headliner, then I would guess that's where your problem is. Does the cable run over the roof or does it go across the windsheild and down the door jam? Let me know what you find. Thanks for watching.
My 2015 F150 3.7l flex fuel, I have a low break fluid level warning alarm going off constantly but not continuously. The break warning light comes on intermittently and the airbag lite shows the airbag has been disabled since the low brake fluid warning started. I've contacted 2 mechanics who couldn't diagnose the problem. I then took it to the dealership and was told it was the anti-lock braking system module sensor under the steering wheel. The cost is $567.00 on top of the $120 for their diagnosis! Is it possible to avoid the dealership prices by doing it myself?
When you replace most modules, they will need some sort of programming or at the minimum a relearn process. Even if you change it yourself you may still need a shops help. If you get the dealer to change the part they diagnosed, you'll have warranty. If you change it there will be no warranty. Thanks for watching and commenting.
@@shanersmechaniclife3164 Thanks for the advice. I'll follow your advice and maybe avoid any problems down the road by trying to save a few bucks.
I could use some help. I have a 2016, backup camera was giving a blue screen on and off for a couple weeks, then went totally blue a few months ago. I checked the fuse under the hood, I believe this is the only place for the fuse for this year, backup camera. I think the one under the passenger dash is for the 360 camera which I don’t have. I disconnected the battery for 20 min to reset the system. I blew compressed air in the connection at the driver side kick panel. I blew compressed air in the connection under the rear bumper. I swapped the camera. None of these things worked. The only thing that worked, but only for 5 min, was the first connection right at the camera. I opened it up, it was clean, I blew compressed air in there and reconnected. I put the car in reverse and it was working. I got everything put back into place, screwed everything back together, checked again and it still worked. I went inside, and when I came back out a couple hours later, car just sat in the driveway the whole time, camera was back to a blue screen and I haven’t been able to get it working since. I’m totally frustrated and the dealer has been useless. I think it may be that first pigtail at the camera, maybe a wire got pinched with the opening and closing of the tailgate, although I can’t see anything, or maybe the actual plug/pins went bad. I’m just not a fan of buying part after part in the hopes that it may fix the problem without knowing what the problem is. Any ideas?
Did you end up figuring it out? Same issue on a 2015. Intermittent blue screen for the back up camera.
@@maniaslayer9nope. Every forum I ask on, nobody ever replies with other options. I’d like to test/trace the wires so I can figure out where the problem is and know what part to replace, but nobody has given me any tips on doing that either.
WHY DOES MY SCREEN SHOW AND THEN GOES BLUE SCREEN 2114 FORD RANGER