Ive been all over looking for great inlay videos and this one is by far the best ive seen by far!!!! Please, Whatever you do, keep sharing inlay with me and the rest of the world!!!!
Hi Debra, Re: Cyanoacrylates (super glue) vs. 2-part epoxy. You’re correct in that using epoxy would solve all issues. However, sad to admit but I’m too impatient to wait the hours required for the epoxy to cure😉. Therefore it’s perfectly legitimate to use super glue when constructing the Intarsia and as a final step, attaching a backing with epoxy. This will head off any potential negative issues resulting for the use of super glue. Additionally, the Loctite Gel super glue I now use claims to be “water/moisture” resistant as well as less susceptible to shock/vibration. Regardless, in the 20+ years I’ve been doing this, I’ve never had any pieces come apart due to glue failure.
Hint on the super glue in that type of dispenser. Before you activate the dispenser, the part that you pinch for the glue can be removed by holding the top and pulling out the bottom, it just pulls out, then cut with clippers each side of the top. You now have the full tube to use because the other way wastes a lot.
I haven't had so much fun learning in ages 🥰🤣 However..makes my wrists hurt; why not put a piece of pool noodle over the edge of your grinder tray? Second random thought...if your drill is turning opposite the direction of the grinding wheel, it may result in faster cutting....? GREAT video, much better than many of the other videos from the school I've watched. They need to put your camera skills to work with Diane Mason, so I can actually see what she's doing, for instance.... Thank you so much!
I have used a regular drill press before. The drilling process is pretty messy (I.e. wet) so I tried to prepare the area so everything wouldn’t get wet and possibly rust.
check with a local rock and gem club to get some ideas for sources. The best place other than the local clubs is probably rock and gem shows. EBay sells slabs but they can be pricey.
Hello, The new guy who took over Al Sesona’s business is Jim Munyon. He’s not as responsive as Al was but people say if you keep trying that he will respond. Here’s Jim’s contact information: (Jim Munyon- (904) 449-5090 - Jem1cutter@aol.com) Some people have had good luck contacting him via text. Let me know how you make out👍
Hello, I've done this numerous times as follows. Drill part just way into the stone with the core drill of the size hole you want. The depth will be determined by the stone's thickness. I usually try to judge it as roughly half way. If you have a precision drill press you can set a stop. I just use a cheapie drill press so do it by eye. At this point, take a small diameter drill or core drill and begin drilling a series of random holes into the center plug of material that you want to remove. Eventually you'll gradually eat away all of the center plug material. The bottom of the cavity will be rough but it won't matter since you'll be filling it in with another stone or maybe crushed stone/epoxy mix. Let me know if you have any further questions. Good luck👍
Хобби
Great Video thank you!
Ive been all over looking for great inlay videos and this one is by far the best ive seen by far!!!! Please, Whatever you do, keep sharing inlay with me and the rest of the world!!!!
What a beautiful way to finish an intarsia piece! Thank you for sharing, Bill!
✌🤠✌
Thank you and we have taken many good classes at William Holland. We hope to do more.
Thanks for sharing this technique, a beautiful piece. I am going to pass this on to my brother-in-law who does lapidary.
Hi Debra, Re: Cyanoacrylates (super glue) vs. 2-part epoxy. You’re correct in that using epoxy would solve all issues. However, sad to admit but I’m too impatient to wait the hours required for the epoxy to cure😉. Therefore it’s perfectly legitimate to use super glue when constructing the Intarsia and as a final step, attaching a backing with epoxy. This will head off any potential negative issues resulting for the use of super glue. Additionally, the Loctite Gel super glue I now use claims to be “water/moisture” resistant as well as less susceptible to shock/vibration. Regardless, in the 20+ years I’ve been doing this, I’ve never had any pieces come apart due to glue failure.
That is some awesome skills really enjoy your method and thanks for sharing
This is so informative I love it!! Iv been wondering how to do this.
Thank you for sharing your wonderful work. 😊
Hint on the super glue in that type of dispenser. Before you activate the dispenser, the part that you pinch for the glue can be removed by holding the top and pulling out the bottom, it just pulls out, then cut with clippers each side of the top. You now have the full tube to use because the other way wastes a lot.
It all make sense to me! Good show!
Nice chainsaw sound effects on the cutting wheel, lol.
So awesome!
I haven't had so much fun learning in ages 🥰🤣
However..makes my wrists hurt; why not put a piece of pool noodle over the edge of your grinder tray? Second random thought...if your drill is turning opposite the direction of the grinding wheel, it may result in faster cutting....?
GREAT video, much better than many of the other videos from the school I've watched. They need to put your camera skills to work with Diane Mason, so I can actually see what she's doing, for instance....
Thank you so much!
Great video. Thanks for the info. Are you, or can you, use a regular drill press for this or do you need a special lapidary one?
I have used a regular drill press before. The drilling process is pretty messy (I.e. wet) so I tried to prepare the area so everything wouldn’t get wet and possibly rust.
@@oldrockhound1595 thank you!
That sugilite slab is now worth thousands of dollars. Ok. If it's reconstituted, it's hundreds.
What is the best place to buy slabs?
check with a local rock and gem club to get some ideas for sources. The best place other than the local clubs is probably rock and gem shows. EBay sells slabs but they can be pricey.
Hi do you no where to get a intarsia machine been looking everywhere. Highland park still haves made there’s
Hello, The new guy who took over Al Sesona’s business is Jim Munyon. He’s not as responsive as Al was but people say if you keep trying that he will respond. Here’s Jim’s contact information: (Jim Munyon- (904) 449-5090 - Jem1cutter@aol.com)
Some people have had good luck contacting him via text. Let me know how you make out👍
Can I have the name of your supplier? Mace Craft? Wonderful video.
www.masecraftsupply.com/
@@oldrockhound1595 Thank you so much!
jezus h christ. this is why I am self taugbt. TEACH MORE, TALK LESS
FFS.
What if I don't want my hole to go all the way through ? What is a good way to make that circular "well" or depression ?
Hello, I've done this numerous times as follows. Drill part just way into the stone with the core drill of the size hole you want. The depth will be determined by the stone's thickness. I usually try to judge it as roughly half way. If you have a precision drill press you can set a stop. I just use a cheapie drill press so do it by eye. At this point, take a small diameter drill or core drill and begin drilling a series of random holes into the center plug of material that you want to remove. Eventually you'll gradually eat away all of the center plug material. The bottom of the cavity will be rough but it won't matter since you'll be filling it in with another stone or maybe crushed stone/epoxy mix. Let me know if you have any further questions. Good luck👍
@@oldrockhound1595 thank you very much