Thanks for your tutorial! I built a version of this from your video. Kudos for getting your original tailstock bearing design operational. I attempted your original design only to chuck a piece of wood across the shop. I went with a modified bearing-in-block design that was a bit more reliable
Ingenious. I'll be using your ideas in my own project. I want to make a ship wheel for each of my kids, grandkids, brother, etc. But, I want to also make the lathe that turns the spokes. I'll likely use bearing housing from a local Bearings and Drives but you've given us the basis for our own builds and that is what is most important. Share our ideas, and we ALL benefit. I'll also have to change up the dimensions for we in the USA, but that is a very small task. THANK YOU VERY MUCH.
I'm glad you liked it. Thank you for watching and commenting. Sorry I could only give the dimensions in metric. I wish you success in your new projects. I hope you enjoy your work a lot. My deepest regards.
@@GreenSaw No. Thank you for the ideas. I'll deal with the measurements here in the USA. THAT'S WHAT WE HAVE GOOGLE FOR!!!! There are things I'll change just because I can just go buy them, such as bearings, etc. and I might add a vacuum chuck, but the basic premise will be your plans. Hey, life is a work in progress. But my kids will know the thought, with a little bit of blood that went into the process.
ustam harikasın... videolarını uzun zamandır hayranlıkla izliyorum. insanın ufkunu açıyor ve ahşap ile çalışma hevesini uyandırıyorsun içimizde. devam et böyle allah nazarlardan korusun. tebrik ederim...
Great build, I believe I can make one out of (mostly) metal after watching this project. The first tail stock looked wobbly, and the second (alternate) one was not clear how you made it (was it a dead center or a live center?) Did you fix the wobble of the first one and how?
I'm glad you like it. It's been a long time since I made the lathe. Unfortunately, I had to say goodbye to it when I moved my workshop. I can't remember what I'm doing now. No one but you has asked about it. Have you watched the video series in full? The answer may be in the videos.
Muy Bueno Amigo. You have my respect for creativity. I would like to watch you making your clamps. The long (good) clamps are very expensive. Your clamps seem just as good. Keep up the good work. A gringo in Idaho. God Bless.
I think the machine bed is best done whole. Думаю, станину станка лучше делать цельной. Без прорези в центре, которая ослабляет жесткость на кручение. Или коробчатой.
awesome job man. this is definitely one of the best designed DIY wooden lathe I've seen on YT. and believe me there are a lot of them out there and most are just plain crap.
Wooden Lathe - PDF added (26-11-2019) ruclips.net/video/b-c00a7C3SI/видео.html Correction: 22mm instead of 20mm Correção: 22mm em vez de 20mm Korrektur: 22mm statt 20mm Correzione: 22 mm anziché 20 mm Corrección: 22 mm en lugar de 20 mm Correction: 22mm au lieu de 20mm Düzeltme: 22mm yerine 20 mm
Zaten plywood (kontraplak) tam 20mm olmuyor birazcık daha fazlası oluyor. Araya tutkal vs. de girince 5mm bir artış oldu. Dolayısı ile genişlik 145 oluyor. Hatta şimdi ölçtüm 146mm çıktı :)
Sí, pero, para qué? ¿Según el tipo de madera? O si vas a tallar o dar aceite? Sería interesante saber en qué usas cada polea, y qué tal trabajaría con el motor directamente. Gracias por responder ☺️
Elinize emeğinize sağlık yine süper bir çalışma olmuş 2. bölümü sabırsızlıkla bekliyorum.. Keşke komşu olsaydık siznle.. İlham kaynağımsınız. Teşekkür ederim.
Bonsoir mon ami bricoleur tu travail comme un professionnel tu fait un super travail les vidéos sont supers et très clair je me permets de télécharger les documents car il y a un moment que je veut en fabriqué un si tu me le permet c'est avec un grand plaisir de copier ton invention comme cela quand je serai je penserai à toi tu fait du super boulot continue à très bientôt Bernard
I love the way that you make all of your tools out of wood.
Thanks for your tutorial! I built a version of this from your video.
Kudos for getting your original tailstock bearing design operational. I attempted your original design only to chuck a piece of wood across the shop. I went with a modified bearing-in-block design that was a bit more reliable
Nice work!
Отличный станочек получился! Успехов мастеру!
Ingenious. I'll be using your ideas in my own project. I want to make a ship wheel for each of my kids, grandkids, brother, etc. But, I want to also make the lathe that turns the spokes. I'll likely use bearing housing from a local Bearings and Drives but you've given us the basis for our own builds and that is what is most important. Share our ideas, and we ALL benefit. I'll also have to change up the dimensions for we in the USA, but that is a very small task.
THANK YOU VERY MUCH.
I'm glad you liked it. Thank you for watching and commenting. Sorry I could only give the dimensions in metric. I wish you success in your new projects. I hope you enjoy your work a lot. My deepest regards.
@@GreenSaw No. Thank you for the ideas. I'll deal with the measurements here in the USA. THAT'S WHAT WE HAVE GOOGLE FOR!!!! There are things I'll change just because I can just go buy them, such as bearings, etc. and I might add a vacuum chuck, but the basic premise will be your plans. Hey, life is a work in progress. But my kids will know the thought, with a little bit of blood that went into the process.
No me canso de ver tus videos amigo.
Excelente contenido!
Gracias por compartir.
Saludos desde Reynosa Tamaulipas México Maestro!!!
Chiaro, preciso e conciso! Un maestro nel lavoro del legno.
Thank you for the pdf! I’m making this. I harvested a 3hp treadmill motor.
Alle Achtung vor deinen präzisen und sehr nützlichen Projekten
Es macht viel Spaß und Freude dir zuzuschauen!
Vielen Dank. Froh, dass Sie es mögen.
Saludos desde Costa Rica gracias por compartir tu conocimiento para con nosotros Dios te bendiga
Hut ab vor deinen ganzen selbstgebauten Werkzeugen.
Vielen Dank für Ihren netten Kommentar.
Keren dan simple sekali..benar benar kreatif jenius dan meng inspirasi saya.terima kasih yelah berbagi
ustam harikasın...
videolarını uzun zamandır hayranlıkla izliyorum.
insanın ufkunu açıyor ve ahşap ile çalışma hevesini uyandırıyorsun içimizde.
devam et böyle allah nazarlardan korusun.
tebrik ederim...
Çok teşekkür ederim, güzel yorumunuz beni sevindirdi. Allah hepimizi korusun...
10:31 corrected 12x37x12 mm (Thanks Ayhan Şimşir)
Hola soy nuevo en esto y tu vídeo es Muy bueno felicitaciones, estoy aprendiendo
suuuuupah. exxelently demonstrated. grt patience and determination. keep it up
Nice build, think I'll try it myself
I like this lathe, thanks for share...
Awesome input!, thanks a lot!!! 👏👏🙌
Tek kelimeyle bravo! Tebrik ederim, PDF lerle birlikte harika bir çalışma.
Teşekkür ederim.
Outstanding
Excellent work Sir. Good to have one in the workshop. Please share the plans 👍
Gracias, es una exelente herramienta, trataré de hacerlo igual, si puedo,Que Dios te bendiga
Me alegro de que te guste. Te deseo unos días bonitos y saludables.
Great build, I believe I can make one out of (mostly) metal after watching this project. The first tail stock looked wobbly, and the second (alternate) one was not clear how you made it (was it a dead center or a live center?) Did you fix the wobble of the first one and how?
I'm glad you like it. It's been a long time since I made the lathe. Unfortunately, I had to say goodbye to it when I moved my workshop. I can't remember what I'm doing now. No one but you has asked about it. Have you watched the video series in full? The answer may be in the videos.
molto laborioso, bravo!
Muy bueno felicitaciones
thanks for the PDF file for free. it helps a lot.
You're welcome!
Great, as usual. Waiting for the PDF. Thank you for sharing
Thank you Clay....
Merci vraiment à toi, vidéos très intéressante que je compte mettre en pratique rapidement
Content que vous l'aimiez, merci.
Beautiful job. Quite inspiring.
Muy Bueno Amigo. You have my respect for creativity. I would like to watch you making your clamps. The long (good) clamps are very expensive. Your clamps seem just as good. Keep up the good work. A gringo in Idaho. God Bless.
Hello friend, thank you for your comment. Have you looked at these videos? ruclips.net/video/zNrEcNd5gCg/видео.html
Very cool tensioning idea
Complimenti!! 👍👍 un Bel Lavoro 👏👏👏😜
Nice work my friend. Looking forward to part 2
FELICITACIONES!!! muy bueno!
СИЛЬНО МУДРЁНО !
I think the machine bed is best done whole. Думаю, станину станка лучше делать цельной. Без прорези в центре, которая ослабляет жесткость на кручение. Или коробчатой.
Great build. :)
very nice build sir.. hope to see the plans... thank you
El plan estará listo en unos días.
Description
Um ótimo trabalho, como sempre.
Muito gratificante assistir o desenvolvimento.
Thank you...
cok yaratici ve sanatkar bir calisma aynisini yapmak icin ugrasacagim
Wow! Está genial muchísimas gracias por compartir , de lujo
I loved this idea 💡 thanks
Thanks for watching. Glad you like it.
Olá amigo, você além de talentoso é muito caprichoso, pena que só hoje descobri seus trabalhos. Parabéns, sou de Brasília.
cool video
Wonderful! Congratulations!!
Thank you
Muito bom ficou , top esse torno, vou fazer um Também, obrigado.
Estou feliz por ter gostado. Obrigada.
Very nice!
Que trabalho perfeito parabens
So passando pra deixar um joinha...
Bonjour c'est un travail superbe , je vais essayer de le faire, mais je n'arrives pas à télécharger les plans!!! oupsss
Bonne journée Cdlt
Quel est le problème ? Le site fonctionne normalement.
y el pdf? jamas pude bajarlo.....
very nice idea with motor slide
Amazing! Your creativity is next-level!
Thanks.
Great job, some interesting ideas here.
It looks like it is turning too fast though? 300 - 2400 rpm should be the range for wood lathes.
Thanks for the tips!
Muy bueno, pero hay que tener mucha precisión en las manos para construir un torno. Gracias por compartir.
Interesting question : how did you install the pulley belt without disassembling its box?
Молодчага!Классный станок!
Merhaba. güzel fikir. ahşap torna yapımı ilerleyen bölümlerde muhteşem bir finalle hazır hale gelecektir. eline emeğine aklına sağlık. selamlar.
Merhaba teşekkür ederim. Sizin projelere de bakmak lazım onlar da güzel.
@@GreenSaw sağolun. varolun. selamlar..
Nice build so far!!
Wow super Arbeit du hast mich inspiriert es zu versuchen nachzubauen 🤗🤗 liebe Grüße von Manfred aus Deutschland 🤗🤗🤗
süpersin ustam
Excelente
Donde descargo los planos PDF. No he podido
great job
عمل رائع جدا
would love to make my own lathe.
Excellent video sir, very entertaining to watch. Bless you and have a really good day 😃😃😃👍👍👍
I'm glad you liked it. Thank you for your comment. With all respect.
Just watching part 2 now … great stuff !!
Awesome build 👌👌love it Sir!😊
Thank you....
awesome job man. this is definitely one of the best designed DIY wooden lathe I've seen on YT. and believe me there are a lot of them out there and most are just plain crap.
Thank you for your nice comment :)
Wooden Lathe - PDF added (26-11-2019)
ruclips.net/video/b-c00a7C3SI/видео.html
Correction: 22mm instead of 20mm
Correção: 22mm em vez de 20mm
Korrektur: 22mm statt 20mm
Correzione: 22 mm anziché 20 mm
Corrección: 22 mm en lugar de 20 mm
Correction: 22mm au lieu de 20mm
Düzeltme: 22mm yerine 20 mm
thank you
Eline emeğine sağlık. Teyit etmek için soruyorum.. 22 mm hard wood 20 mm olacak. Bu durumda genişlik 145 mm değil 140 mm olacak doğru mudur?
Zaten plywood (kontraplak) tam 20mm olmuyor birazcık daha fazlası oluyor. Araya tutkal vs. de girince 5mm bir artış oldu. Dolayısı ile genişlik 145 oluyor. Hatta şimdi ölçtüm 146mm çıktı :)
@@GreenSaw tamam o zaman tekrar teşekkürler. 2 bölümü bekliyorum umarım en kısa zamanda görürüz. Kolay gelsin.
Merhabalar 10:31 Rulman ölçüsü (17x37x12) yanlış yazılmış sanırım... 12x37x12 olmalı diye düşünüyorum. Ayrıca elinize sağlık, mükemmel...
Haklısınız 12x37x12 olacak uyarınız için teşekkür ederim. Beğendiğinize sevindim.
Seria importante as medidas! Trabalho sensacional!
very much thank you for the plan sir.... more power to you...
Thank you.
Muchos. Saludos
Podrían. Haser un.especie cómo de cilindro o.amasador de masa para pan ?
Gracias
très intéressante vidéo, merci
Je te remercie.
Olá. Magnifica construção. Como posso obter o plano em PDF?
Vá para esta página, há um link na parte inferior: www.greensawdiy.com/wooden-lathe-making-pdf.html
Very AMAZING
Siempre útiles vuestros videos!
exelent
Very nice lathe thanks
Estou querendo fazer um torno sou apaixonado por peças torneadas
Very nice lathe, thank you.
thanks maker202
Buen trabajo! Por qué poleas, y no directamente? Un saludo
Hola, para poder cambiar la velocidad de rotación y el par
Sí, pero, para qué? ¿Según el tipo de madera? O si vas a tallar o dar aceite? Sería interesante saber en qué usas cada polea, y qué tal trabajaría con el motor directamente.
Gracias por responder ☺️
Gostei, vou tentar fazer, com algumas mudanças.
Richtig feines Ding👍
bello ottimo lavoro
où puis-je trouver le pdf svp ?je n'y vois rien
www.greensawdiy.com/wooden-lathe-making-pdf.html
voir en bas de page.
Elinize emeğinize sağlık yine süper bir çalışma olmuş 2. bölümü sabırsızlıkla bekliyorum.. Keşke komşu olsaydık siznle.. İlham kaynağımsınız. Teşekkür ederim.
Teşekkür ederim. 2. Bölümü henüz editleyemedim yakında bitirmiş olurum. Hangi şehirdesiniz ?
@@GreenSaw sabırsızlıkla bekliyorum kolay gelsin. Ben Kuzey Kıbrıs Türk Cumhuriyetinde yaşıyorum.
Bizim komşuluk yattı. :) İstanbul
@@GreenSaw malesef.. Buradan takibe devam. 2. Bölümü sabırsızlıkla bekliyorum. Kolay gelsin..
olá muito bom mas vc empresta as ferremntas ai para nós kkkkkkkkk
Bravo amigo
Nice job well done
Thank you so much. I am very glad that you like it.
boa tarde, como baixar o projeto em pdf ??
O plano estará pronto em alguns dias.
De lujo
¿ LAS MEDIDAS SON EN MILIMETROS O EN CENTIMETROS? ¿MEASUREMENTS ARE IN MILLIMETERS OR CENTIMETERS?
Sí, las dimensiones están en milímetros.
En mecánica los diámetros y largos se expresan en milímetros:
décimas, centésimas y milésimas de milímetros.
sorry i found them thanks ..great job
nice and good job
Perfect 👏👏👏👏👏👏👏👏👏
Ficou lindo esse torno! Parabéns.
Bonsoir mon ami bricoleur tu travail comme un professionnel tu fait un super travail les vidéos sont supers et très clair je me permets de télécharger les documents car il y a un moment que je veut en fabriqué un si tu me le permet c'est avec un grand plaisir de copier ton invention comme cela quand je serai je penserai à toi tu fait du super boulot continue à très bientôt Bernard
se eu tivesse essas ferramentas dele pra que eu queria montar um torninho kkkk
Да, если уж сам не сделаешь, то полюбуешься на чужую работу!