DIY 電動ドリルで旋盤の作り方 How to make hand drill lathe.
HTML-код
- Опубликовано: 29 ноя 2018
- スイッチの壊れた電動ドリルを旋盤にしました。
I converted broken drill for lathe.
RUclips上にある多くのドリル旋盤の動画を参考にしましたので
作られる方はDrill lathe などで検索してみてください。
Thank you for watching! ご視聴ありがとうございます。
Please subscribe チャンネル登録お願いします。
2nd channel： / @tsukumorepair6914
Twitter / tengoooooooood
Mail tengucraft@gmail.com
使用レジン Resin amzn.to/2LsxST9
ベルトサンダー Beltsander amzn.to/2LqxoNg
ルーター Router amzn.to/2LnBLc5
ボール盤 Drill Press amzn.to/2IJ63bo
研磨剤 Polish paste amzn.to/2LDGrKL
シリコン Silicon amzn.to/2PNVyHh
スケール scale amzn.to/2PNYG5Z 
Хобби
It makes me so glad I was taught at boarding school in 1966 age 11 how to use woodwork machines and metalwork too. I gather kids today don't get practical lessons like that these days.
I made my first lathe back in 1974. I had two horizontal drill stands clamped to a cement stair panel, One held an old black and Decker drill and the other held an old chuck, which was my dead center. I used a brass fitting which I shaped to be the live center bit. I used a lump of timber too act as my chisel support and the chisels were all made form old metal files. I would turn nose cones from balsa wood for my model rockets. Later my father got hold of an old Knitting machine base and I used that for the base of the lathe and mounted the horizontal drill stands on to the frame and one on the carriage which was my dead center. Fun times.
Oh, the good old time, sweet memory!
I liked it. It's the real deal.
Application of excess glu, dropping stuff and the best was the wood piece jumping out.
All natural and original.
Some of the other videos I watch are so perfect and sometimes too perfect.
Good job
, e
F-g+-hh-gg
私のＤＩＹ範囲なら十分事足りる。道具は使いようでいろいろ応用できるんだという事も大変参考になりました。行動派の貴殿にエール！！
Muy buena idea, te felicito !!! Y muy buen video, sin música, sin palabras y fluido. A la acción !
.An effective practical low cost idea. Thanks for sharing.Your work jumped out dangerously because you did not drill a countersink hole with a centre drill so that the tailstock centre can go in further to lock your wood. Remember to oil the tailstock centre where it contacts the wood. It does help. Periodically readjust your tailstock as the vibrations can loosen the the contact at the tailstock. Your tool resr should be adjustable to be as close to the wood as practical to reduce vibrations
Good Job. Thanks for sharing.
DIYには丁度良さそう！やってみよ！
This is one of my favorites, but i see room for improvements. This is the first that I will try. Some of the vids are more complicated and expensive than just going out and buying the tool.
Hi, Could you recommend me please a tutoriel to make a homemade wood lathe, big enough to use it to create a wooden mannequin for sewing? Thank you forward for it. Have a gr8 day.
@@dacyana115: Did U say sewing? U want life like parts?
Nice one! Very easy to build and no special parts needed. Thank you!
parabéns sem disfarces mostrando erros ocasionais e imprevistos👏👏👏👏👏
....Thank You for posting this....
Definitely trying this
Please don't! There are so many things wrong with this build its hard to know where to begin. The main two glaring mistakes are obvious! The two points do not align. The rest bench is far too far away from his work which can be dangerous. When he tightened the block into the two points the end without the drill moved upwards making the alignment even worse! The end needs to be beefed up so that it cannot move. I could go on about the abuse of his tools too but I think you get my drift. Cheers.
よくやった！
Buen trabajo amigo,he aprendido mucho con Ud. Gracias desde Cordoba(España). Saludos
Parabéns...esse seu torno caseiro foi o melhor e mais fácil de fazer que vi até agora. Show !!
Thank you for sharing your knowledge.
Sy suka dgn cara2 simpel kaya gini buat pelajaran baru good good deh
simples,barato,prático e satisfatório,parabéns mestre
Super practico, facil de elaborar, lo estare fabricando para mejorar mi taller de bricolaje, gracias por subir el video.
指輪の研磨に使っていた機械、手作りだったんですか。すごい！
Good job with those tools!
comecei a assistir seus vídeos hoje, impressionante como você tem idéias ótimas, hoje vai ser o dia todo só para assistir seus vídeos kkkkkkkk 10000000000 likes
exelente video abrazo desde ARGENTINA
Very nice👌a little reinforcement of the chuck jaw and it will have more gripping power to hold. 😊
Thank you .
I want to chuck jaw.
@@tengucraft I think Matthias Wandell made a chuck jaw on his channel
Hi Mahendra Tiwari, Could you recommend me please a tutoriel to make a homemade wood lathe, big enough to use it to create a wooden mannequin for sewing? Thank you forward for it. Have a gr8 day.
Genius! With simplex tools you made a perfect lathe.
Well done. I'm sure you have improvements in mind, but it is a starting point for turning small wood parts.
Nb.
.
Gostei meu amigo. parabéns
Excellent work !!! Just be carefull the wood doesn't get wet and twist !!! Good idea to cover the wood with 3 coats of paint or varnish to protect it from liquids !!
move your tool rest so that it just clears the job a lot less chance of it flying out and gives more control
Hi, Could you recommend me please a tutoriel to make a homemade wood lathe, big enough to use it to create a wooden mannequin for sewing? Thank you forward for it. Have a gr8 day.
Muito bom o torno caseira
I love it man, i want to try making one...
I don't believe I'll ever need a file handle so badly as to go thru all of this, but it was certainly entertaining! Nothing dissuaded him...he just kept right on truckin like a man on a mission with nothing but the most basic of tools. Gotta love it! Bravo!
Hi MHFROX, I agree with your post, you are right. Could you recommend me please a tutoriel (in english, or in french) to make a homemade wood lathe, big enough to use it to create a wooden mannequin for sewing? Thank you forward for it. Have a gr8 day.
You is off the Best my friend.
very simple and nice to operate.
Muito boas suas ideias , vou fazer um. Obrigado.
Só nao gostei q o ponto móvel ficou solto. Por isso a peça se esquivou. Aconselho- te a fszer duas ranhuras embaixo do corpo do torno e fixar duas chapinhas de madeira, pro carrinho móvel nao subir. E um parafuso lateral no carrinho pressionando contra o barramento. Mas antes de por o parafuso coloque uma peça de nylon no formato de uma pedra de dama, no diâmetro do furo, pro parafuso nao marcar o barramento, toda vez q vc travar o carrinho móvel em serviço.
Muito bem ! Sr da terra do sol nascente.
Que gambiarra! A ideia foi boa, mas a execução precisa melhorar, assim vai vir toco na cabeça toda hora.
Gracias, Mercy, Thanks!
Muy buen aporte! Saludos!
Muito bom!
In live it's this same. It's very good.
Brilliant, very simple. I will try to one the same, thanks!!
I like it. Very good.
I have to try this! 😊👍👌
For the most part the wooden feed stock was a couple of down the length ripped 2 by 4s. Pretty clever use of materials, I'd say.
Muito bom mesmo
Saya akan coba buat seperti itu lumayan menambah pengetahuan buat semua orang,,,
i don't know much about lathe safety, but the project looked thought thru and done well. Also, the video flowed very well. Good job.
Good gig, will really good to have an idea the dimensions of pieces!
You can calculate them based on the dimension of the drill. Using the drill dimension as a base.
He takes the basic measurements at the beginning. Use that as a guide.
I like it. Came to a little bump in the road, fixed it, moved on.
Molto interessante complimenti
I am so glad I watched this vid cuz I learned all the things what NOT to do although the idea is pretty good it needs refining for sure.
Congratulation. good my friends
MUITO BOM GOSTEI
buena idea señor,hice una igual solo que la arme sobre una mesa para dar mas estabilidad al torno. GRACIAS.
Simple, I am making this one
飾り足も削る事が出来ますね。
´ ´
ótimo muinto bom brother.
well thought out.
I'm no expert at wood turning but just thought you might have took corner's off the wood before you started and seems like the tool rest was a bit far from the work and tailstock didn't seem very strong nice idea though
Fantastic 🤘
very nice
I'd have to agree with those below. The end opposite the drill needs to have at the least a triangular brace. The wood brace holding your pivot bends out away from the piece when you are tightening your pivot rod. This will add excess wabble since your center end is not securely fixed. It will also put excess stress on your screws securing this upright and cause it to lose integrity.
Great effort. My greetings
Thanks for the upload. I’m going to make one, but I won’t be using a drill as a power source. I’m going to use a bench grinder motor.👍👍👍
A 750-3200 variable speed drill is more effective in this case than any other fixed speed motor.
you are te best!
Nice
Bravo!!! Anche senza grande attrezzatura, sei riuscito realizzare qualcosa di veramente pratico, alla portata di tutte le persone come me che praticano quest'hobby per passione. Complimenti!
How smart! I love it.
Z Como >is૯૬૦ANE્ENchાં No૮ 6.૮્R 0 ૬ Un્r 1 f૯્DE LA A૮hi N
muy buen tuto
muito bom
Super Coole Idee..
Excelente muy facil y buena idea muchss gracias.pero yo le dare mas altura
Others have mentioned the fact that the tool rest is too far from the work. Another thing: if you must touch the spinning stock (feeling for smoothness, sanding, oiling...) always do it in back, never on top or in front. Imagine your fingers getting caught and jammed in the tool rest. (Which is virtually guaranteed with that big gap.) Always be aware that a lathe is one of the worst tools in the shop for grabbing hold of body parts and destroying them. Always come at it with preventing that as Step 1.
Great thanks for sharing a brilliant idea merci l' ami :) :) :)
Agradeço peso seu vídeo! Apenas uma observação: O apoio do formão está muito afastado da peça que está sendo torneada, isso dificulta o trabalho!
C'est un bricolo de parking .......
*очень простая конструкция, то что нужно! спасибо!*
Заднюю бабку только надо усилить.
Crude bet, effective. Pretty Good Idea.
impressive....thumbs up
thanks for video
天狗さんの動画は、私に勇気を与えてくれます ＾＾
他の方の動画は、すばらしいんですけど、「こんなのできるかい！」「真似できないorz」ってよく思うんですけど、天狗さんのは、「まずは作ってみよう！」って気になります。
ありがとうございます。
材が飛んだところがスローモーションなのが、すごい好きです。
音楽も解説もないのも好きです。
I love your sweet video.
Как говорится, если руки золотые , то не важно от куда они растут))
Aí e top bão demais da conta 👏👏👏👍
Good very creative. 👍
C'est plein d'astuces, c'est intelligent, ça me plait ! 👍
👍
👍👍
@@tengucraft ဗေဗဗေေေ
ဗဗဗေေေ
ေ
Excellent.
In this budget.. 💰💵💴💶 $ it is great. 👍👍👍👍
Hi Gurbaljit Singh sandhu, Could you recommend me please a tutoriel (in english, or in french) to make a homemade wood lathe, big enough to use it to create a wooden mannequin for sewing? Thank you forward for it. Have a gr8 day.
I think this is great, sure there are some slight bugs to work out, but that's how we got to CNC in the first place, I think?
Hi Dave M, Could you recommend me please a tutoriel (in english, or in french) to make a homemade wood lathe, big enough to use it to create a wooden mannequin for sewing? Thank you forward for it. Have a gr8 day.
Very nice.
Why did you drill the hole in the tailstock by hand with another drill? I guess you can easily use your hooked drill to make the hole on it using the same drill bit.
Hey just a tip. Try moving the right side in a little bit as you go it will wear down on that side
Hello this lathe can be used for pool cue ?
Well done,
ベースが木製だとどうしてもしなるから危ないですよ。
固定用の土台スライドすろことを考えておられるならネジ式ぐらいが安く済むんですかね？
L型アングルとH鋼とかで強度取りつつ安くできる様な気がします。
cool idea :) @12:41, the hook on the bit, what's the name ?
how can the drill holding the wood ? is there a hole on the wood ? thanks
самый реальный проект на ютубе что я видел..спасибо огромное ...
Very nice leth machine
押し台の締め付けが弱くて物が顔に飛ぶかもね。。