PERFECT for what I want- refinishing old tables, need a way to sand legs evenly - this is great! Going to build one one, and save a lot of money. Thank you!
I'm sorry...The projects I do are based on the references of those who have gone before and follow my needs. I'm not good at drawings. Thanks for watching!
Boa noite meu amigo: tô passando por aqui pra, te agradecer por essa maravilhosa dica; e também dizer que: já vou montar o meu torno ., com as suas docas é claro!! Parabéns.
Thank you. I will take note of it However, I think the size of the project will depend on the needs of processing different types of wood and wood size
1:23 I am confused how your part is not thrown away (with your fingers) after improper routing (feeding your part in the wrong direction). Probably you are lucky.
Any Chance you can give us the cut sheet for this project? I have been looking at making a drill lathe for cork fishing rod handles and this would be perfect!
Thank you for watching! It's an old project I worked on a long time ago. You can based on the size of hand drill you have and your lathe purpose to get the right project size, I did the same 😄
Mitä liimaa käytit työssäsi. On erittäin hyvä sorvi. Kiitos. Täytyy tehdä itselle myös.
PERFECT for what I want- refinishing old tables, need a way to sand legs evenly - this is great! Going to build one one, and save a lot of money. Thank you!
Simple, effective, well designed. Awesome 💯👍😎
muy Buen trabajo . Carlos Nuñez de Azul, Buenos Aires, Argentina
Thank you!
Te doy las gracias por enseñarnos y mostrarnos esas geniales ideas Desde Barcelona un cordial saludo
Keren bro. Inovasi tiada henti
Excelente dica. Parabéns pela objetividade e clareza.
Mashaallah khub valo video......
Great job. Thanks for showing an easy way to do small projects
Parabéns, simples e objetivo!!
Muito top parabéns pelo o projeto vou tentar reproduzir um pra mim obrigado pela a aula.
por favor qual o tamanho ou medida
Ottimo,lo stesso mio progetto 😁😄
You are a genius
wow..great work🤩🤩🤩
Kreatifitas yang sangat luar biasa,,, 👍👍
EXCELENTE!!!!!!! 1000 LIKES!!!!!!!!!!
Thank you!
Great work. Good to have a drill that has a knob to change the speed, rather than have to set up a screw to do that.
👍👍👍👍
Mantap gan...!!
Great job looking forward to viewing more of your work.
Thank you!
Me gusta gracias
Mahtava video. 👏 👍
Lo felicito siga con su mente creadora que va muy bien .
This is awesome. Simple and clear. Appreciate it. Liked and subbed :)
Serviços de qualidade com a mesma coisa que você tem que ter conseguido
Kreatif om ,luar biasa ,, 🙏⭐ moga sukses ya ⭐
Terima kasih telah menonton!
It is very cool.
Amazing!
Muy útil gracias de casualidad tiene planos con medidas gracias
Do you use that long pinky nail to scribe lines on wood.?
Parabéns esse jig ficou top
Nice and may JESUS bless you
Muchas gracias
basico facil gracias profesor
Meus parabéns amigo inscrição e like garantido 👏
Thanks!
nice project sir, i like to build one for myself.. can i ask, what is the size of bearing you used?
Só tenho a agradecer deixo por conta de vocês
This is great. Do you have plans and material downloads?
I'm sorry...The projects I do are based on the references of those who have gone before and follow my needs. I'm not good at drawings.
Thanks for watching!
I love your work, friend, it hurts that they don't work out for me 😭😭😭
Very good. Do you have the necessar plans with dimension stc. for download? Thanks. Dieter
Super 👷👍
Boa noite meu amigo: tô passando por aqui pra, te agradecer por essa maravilhosa dica; e também dizer que: já vou montar o meu torno ., com as suas docas é claro!! Parabéns.
❤🙏🙏🙏👍
terimakasi atas sering nya bos q..
nice muito bom
another one ! waw ! very good job ! we would need a special video with the dimensions of each achievement ! it will be cool !
Thank you. I will take note of it
However, I think the size of the project will depend on the needs of processing different types of wood and wood size
哟去i儿哦u哪妈去i哪asi
Me encanta pero quiero saber las medidas de cada corte por favor se lo agradezco y gracias por compartir tu trabajo
What are all the measurements to all the pieces of that lathe you built? I want to make my own.
it's easy if you watch how it's made and it's not rocket science
@@phil3332 ok what are the measurements then por favor
gostei muito, mas queria saber se o ponto de apoio e sem treinamento?
That's great,i want to know.
.esta muy buena la idea
VERY GOOD
Acho melhor a ideia do que é possível gostaria
Boa noite .Vc fez os rebaixo no dois sarrafos qual fresa que vc usou ..
Mantap👍👍😄.
Great video! Great lathe! Keep it up brother.
Thank you!
This was super enjoyable to watch. Also that circular saw jig is the same style as mine. Cheers. 💯
Omdraai driabank
I perked up when I saw that 😅
I need something like that for mine
obrigada, vc foi super acertiva na mensagem espiritual. felicidades 🎉🎉🎉🎉
Gostei do material e do suporte como ferramenta beleza bom demais
Parabéns ótimo trabalho
Good job 👍🙏
Thank you!
I like this video. Very good and educative
Thanks!
Do you need a high torque drill or high speed?
Esse sim para eu executar
Perfec
Класс люблю урок труда с детства
this is awesome! what did you use in the drill chuck for a bit to hold the workpiece?
It's a forstner bit
Buena idea
Did u use hammer drill for the lathe?
Gostaria muito leva meu jeito quero este modelo
Mat pagi mas kalo boleh sampe harga berapa. Siap pake sa borya itu pokokya aku tingL pake berapa harga sampe kalteng agro indomas ?
Olá pode passar as medidas por favor
thanks for this excellent idea, just a stupid question if i want to make four legs how are you going to copy from the first one. Thanks pj
Use a caliper
No dimensions mentioned. Also I I might be wrong but a drilling machine isn't supposed to turn clockwise
Right. thank you I will readjust it.
Lllllll
It does turn clockwise and anticlockwise you might have another model!
It doesn't need dimensions, it's a simple build.
They have reverse
I need a cue lathe repair please
What kind of drill bit is that?
Counter sink or auger bit
Any plans.
1:23 I am confused how your part is not thrown away (with your fingers) after improper routing (feeding your part in the wrong direction). Probably you are lucky.
Great job. Thank you. subbed.
👍👍👍👍👍👍👍👍👍
Design a tool rest that will get right up to the work. the closer the better
Do you have measurements for this?
Meu amigo quanto custa uma bancada de tornear madeira por favor??
Plans???
Please mention the dimensions of the wood piece that you used for this project
This I what I'm looking for
Thanks for watching!
😊😊
😁😁
I think that Fostner bit needs sharpening
So no sizes?
👍👍👍🤝
Mr H, what do you use your pinkie nails for....? Why are they so long, it does not look nice.
Can't you make nail clippers?
Só não passou as medidas
Any Chance you can give us the cut sheet for this project? I have been looking at making a drill lathe for cork fishing rod handles and this would be perfect!
Thank you for watching!
It's an old project I worked on a long time ago. You can based on the size of hand drill you have and your lathe purpose to get the right project size, I did the same 😄
Quardar este vídeo
🙏🏾🙏🏾👍👍
Toop Tooop
I don't know how to send you a photo or video but I'm doing it like you but it doesn't look the same and I was disappointed in myself 😭😭😭😭😭
Thank you for watching!
Most of the projects I've done are also unsuccessful at first, we are not experts, Wish you soon success with your projects.
Mint no fA ya mas .
💕👏💐👌🙏🌹😊😊
OK 👍🏻 !
Thanks!
Việc chế tác này quá mất thời gian, và phải có đủ dụng cụ để làm. Không hiệu quả
You should buy some real shop wood working tools.