Thankfully I've found your channel, got a 2.2 and 3.2 Ranger, both have ABS fault, Electronic Stability Control ESC service lights on, tried a new ABS sensor on the left N/S, no change on the wheel rotation, now I know how to find a wiring fault and more importantly the areas to find the broken wire. Many thanks, great video and a big help !!!
An excellent and very thorough video. Thanks. My 2016 BT50 had a wire break on the LHR sensor (Brown/ Green wire) at the exact same point at the axle clamp. Your video gave me the confidence that this was the stress point. The cable sheath plastic is not flexible, so no wonder the wheel speed sensor wires break here when flexed by axle movement. My local auto electrician was less than helpful and didn't even know where the ABS module was.
Always a pleasure to watch your simple and effective method to find faults, your video could genuinely be used to show apprentice mechanics the correct method to fault find wiring.
Thank you Robert 🙏🙏 Funny you say that as I know for a fact that my videos are used in college to train apprentices. One of my new staff had mentioned that his lecturer was using my videos to teach the class. Very proud 💪💪🙏🙏
@@GerardBurkeBurkesGarage I’m not surprised. It’s shocking the amount of mechanics that won’t investigate wiring issues correctly as they just don’t know or care, I have worked with many of them and seen it first hand. With your videos being shown in colleges the next generation of mechanics have a great start got. Love the videos, thanks Gerard 👌🏻
I wish i knew where your Auto repair shop is, i can take my Ranger to you guys. It’s hard to find someone to trust to do decent work on vehicles nowadays here in Southern California.
Wiring diagrams can be obtained from any of the common main sources, all data, auto data, haynes pro and I am sure there are others as well. Thanks for watching Aiden 🙏🙏
Hi Gerard, I have a 2018 ranger which is showing the same faults but also a few more. U0415:00-68 U0418:86-AF C003A:14-8A U0415:00-48 I think they were all the same faults on your video, replaced the OSR ABS sensor but still nothing cleared. Can you help? Thanks Danielle
I saw nothing about the Hill Descent fault, unless fixing the broken sensor wire also fixed that fault....? I have a 2016 Ranger that also has this fault plus a Steering Assist Fault. This happened immediately after washing the vehicle. It seems as if something got wet and needs to be dried out or perhaps ti needs a party replaced, but IDK where to start. Can you help with this Steering Assist Fault?
I have a 2015 ford ranger where now and then the gearbox gets stuck in a gear and that light comes on. Do u think a sensor can cause a gearbox to get stuck in a specific gear. once i switch off the vehicle and on again the problem is gone for days if not weeks.
I have the same model and pretty much the same problem, mines a manual. Except my also says engine coolant overtemp? The car won't start when this comes up. Any suggestions? Usually happens on a cold start also..
I have the same issue on my ford everest 2020, using the scanner I get lost communication errors on almost all modules including ABS, PCM, PAM and more. Mine doesn’t start when these issues pop up but when it does start all errors go away. Any leads on how you managed to fix this?
My 2019 ka shows that message on the radio sometimes but only intermittently and if you turn everything off and turn the key back on again the message doesn't come back on it's very strange
I have a 2007 ranger fx4 with abs.Tom,Brake and air bag warning lights on! And fuse number 20 still blowing up and transmission works like limp mode 😩😰
Watching in year 2024 on october, i have the same issue same location of right rear sensor, even i changed with new sensor, i hope i can find that right spot to save time, 😅
October 2024 for me too, had it down to the garage who thought maybe ABS pump. I'm convinced its not however, always the RR Wheel Sensor throwing the code plus when I clear the errors the speedometer is all over the show until the ABS is disabled, it then drives perfectly. Going to dig around in the loom before spending ££££ on an ABS pump which might not fix the issue!
Thankfully I've found your channel, got a 2.2 and 3.2 Ranger, both have ABS fault, Electronic Stability Control ESC service lights on, tried a new ABS sensor on the left N/S, no change on the wheel rotation, now I know how to find a wiring fault and more importantly the areas to find the broken wire. Many thanks, great video and a big help !!!
An excellent and very thorough video. Thanks. My 2016 BT50 had a wire break on the LHR sensor (Brown/ Green wire) at the exact same point at the axle clamp. Your video gave me the confidence that this was the stress point. The cable sheath plastic is not flexible, so no wonder the wheel speed sensor wires break here when flexed by axle movement. My local auto electrician was less than helpful and didn't even know where the ABS module was.
Always a pleasure to watch your simple and effective method to find faults, your video could genuinely be used to show apprentice mechanics the correct method to fault find wiring.
Thank you Robert 🙏🙏
Funny you say that as I know for a fact that my videos are used in college to train apprentices. One of my new staff had mentioned that his lecturer was using my videos to teach the class.
Very proud 💪💪🙏🙏
@@GerardBurkeBurkesGarage I’m not surprised. It’s shocking the amount of mechanics that won’t investigate wiring issues correctly as they just don’t know or care, I have worked with many of them and seen it first hand. With your videos being shown in colleges the next generation of mechanics have a great start got. Love the videos, thanks Gerard 👌🏻
@@RobertE92 thank you 🙏🙏
Good to see a mechanic that will repair a problem auto mechanics back here in Ireland would just tell you you need a new wiring loom
Many thanks for this video - what a pleasure - Straight to the point
Nice, clear & precise. Well done Gerard 😉
Thanks very much 🙏🙏 I try my best 🙌
Great work as always Gerard, not rushed and very thorough, fair play👌👍👍💯🙏🙂
Thank you Pat, its always appreciated buddy 🙏🙏👍👍🙌🙌
Thank you. Your video helped alot
Hi Gerard. Great work. You saved my time and money. Thank you man!
Thank you 🙏🙏
Good diagnosis mate!
Thanks mate 🙏🙏💪💪
Gracias Gerard. Excelente estrategia de diagnóstico . KIKE de taller Pit Lane Costa Rica
🙏🙏
Fantastic video, thank you
I wish i knew where your Auto repair shop is, i can take my Ranger to you guys. It’s hard to find someone to trust to do decent work on vehicles nowadays here in Southern California.
Brilliant video!
🙏🙏❤️❤️
Hi Gerard, where did you obtain your wiring diagram for the repair ? Great video , thank you from Ireland
Wiring diagrams can be obtained from any of the common main sources, all data, auto data, haynes pro and I am sure there are others as well.
Thanks for watching Aiden 🙏🙏
Which tool is it that you’re using to wireless detect sensor voltage in real time? Is it an obd scanner?
I noticed on a video also done in Australia and the break is always on the curve where it joins to the rear axle from above.
Hi Gerard,nice video
How old was this ranger?
Hi Gerard, I have a 2018 ranger which is showing the same faults but also a few more.
U0415:00-68
U0418:86-AF
C003A:14-8A
U0415:00-48
I think they were all the same faults on your video, replaced the OSR ABS sensor but still nothing cleared. Can you help?
Thanks Danielle
I saw nothing about the Hill Descent fault, unless fixing the broken sensor wire also fixed that fault....?
I have a 2016 Ranger that also has this fault plus a Steering Assist Fault. This happened immediately after washing the vehicle. It seems as if something got wet and needs to be dried out or perhaps ti needs a party replaced, but IDK where to start. Can you help with this Steering Assist Fault?
Same with mine, how did you fix it?
I have a 2015 ford ranger where now and then the gearbox gets stuck in a gear and that light comes on. Do u think a sensor can cause a gearbox to get stuck in a specific gear. once i switch off the vehicle and on again the problem is gone for days if not weeks.
How can that wire get broken inside that protective plastic all around it, weird
I have the same model and pretty much the same problem, mines a manual. Except my also says engine coolant overtemp? The car won't start when this comes up. Any suggestions?
Usually happens on a cold start also..
I have the same issue on my ford everest 2020, using the scanner I get lost communication errors on almost all modules including ABS, PCM, PAM and more. Mine doesn’t start when these issues pop up but when it does start all errors go away. Any leads on how you managed to fix this?
Can I disable the abs entirely on my 22 ford ranger?
Hey Gerald where are you located. I have a Ford Ranger 2021 with couple of those problems.
You ever get it fixed I have a 21 ranger XLT same issues
My 2019 ka shows that message on the radio sometimes but only intermittently and if you turn everything off and turn the key back on again the message doesn't come back on it's very strange
I have a 2007 ranger fx4 with abs.Tom,Brake and air bag warning lights on! And fuse number 20 still blowing up and transmission works like limp mode 😩😰
Same problem of my ford ranger.
Same here you ever figure it out
Did you know lots of main dealers won't allow the repair of wiring on anything to do with the braking system
I didn't know that, but it doesn't shock me that they would choose not to, clearly way more money to be made in replacement rather than repair
It's the same with airbag.
Watching in year 2024 on october, i have the same issue same location of right rear sensor, even i changed with new sensor, i hope i can find that right spot to save time, 😅
Hope this video helps you fix it, you'll need to investigate the wiring a bit 👌🙏🙏
October 2024 for me too, had it down to the garage who thought maybe ABS pump. I'm convinced its not however, always the RR Wheel Sensor throwing the code plus when I clear the errors the speedometer is all over the show until the ABS is disabled, it then drives perfectly. Going to dig around in the loom before spending ££££ on an ABS pump which might not fix the issue!